The synthesis of NbSi2 by mechanical alloying

1997 ◽  
Vol 12 (5) ◽  
pp. 1172-1175 ◽  
Author(s):  
Taiping Lou ◽  
Guojiang Fan ◽  
Bingzhe Ding ◽  
Zhuangqi Hu
Keyword(s):  
Solid Solution ◽  
Differential Scanning Calorimetry ◽  
Intermetallic Compound ◽  
Mechanical Alloying ◽  
Ball Milling ◽  
Temperature Rise ◽  
Milling Time ◽  
X Ray Diffraction ◽  
Scanning Calorimetry ◽  
X Ray

The stoichiometric intermetallic compound NbSi2 has been synthesized by mechanical alloying (MA) elemental Nb and Si powders. The alloying process has been investigated by means of x-ray diffraction (XRD) and differential scanning calorimetry (DSC). It was found that the formation of the Nb2Si intermetallic compound occurs abruptly after 65 min of milling without any interruptions during the alloying process. However, short interruptions at a 5 min interval during ball milling result in a gradual reaction for the formation of the NbSi2 compound as well as a new metastable bcc structured solid solution. We conclude that the temperature rise during mechanical alloying plays an important role in initiating the abrupt reaction after an incubation milling time.

Mechanically Driven Alloying and Magnetic Properties in Immiscible Mn80Bi20 Nanocrystalline Powders

2013 ◽  
Vol 873 ◽  
pp. 217-220
Author(s):  
Min Xu ◽  
Qun Jiao Wang
Keyword(s):  
Magnetic Properties ◽  
Mechanical Alloying ◽  
Saturation Magnetization ◽  
Ball Milling ◽  
Solid Solubility ◽  
Milling Time ◽  
Early Stage ◽  
Nanocrystalline Powders ◽  
X Ray Diffraction ◽  
X Ray

The paper has described the formation of nanocrystalline Mn80Bi20powders by mechanical alloying and studied the changes of structure and magnetic properties of the powders during the process of ball milling by using X-ray diffraction and saturation magnetization σsmeasurements. The solid solubility of bismuth in manganese increases with milling time and tends to a stable value after 80h milling. The σsof Mn80Bi20increases abruptly with milling time at the early stage and begins to decrease after 15h. At the time of 15h, the σsreaches a maximum, which is about 7Am2/kg. The result shows an interesting information that the antiferromagnetic Mn and the diamagnetic Bi produce ferromagnetic Mn80Bi20in process of mechanical alloying.

Different Cr Contents in Nanostructured Fe-Ni-Cr Alloys Prepared by Mechanical Alloying

2012 ◽  
Vol 531-532 ◽  
pp. 437-441 ◽  
Author(s):  
Qi He ◽  
Tao Liu ◽  
Jian Liang Xie
Keyword(s):  
Particle Size ◽  
Mechanical Alloying ◽  
Ball Milling ◽  
Lattice Distortion ◽  
Milling Time ◽  
Nanocrystalline Powders ◽  
X Ray Diffraction ◽  
X Ray ◽  
Ball Milling Time ◽  
Scanning Electron

Fe-Ni-Cr alloy powders with the different components were prepared by Mechanical Alloying (MA). The phase structure, grain size, micro-strain and lattice distortion were determined with X-ray diffraction. The morphology and particle size of the powders were observed and analyzed using a field emission scanning electron microscopy. The results showed that the Fe-Ni-Cr nanocrystalline powders could be obtained by MA. The ball milling time could be reduced with increasing amount of Cr, resulting the formation of Fe-Ni-Cr powders. With the increasing amount of Cr, the speed of Ni diffusion to Fe lattice approaching saturation became more rapid. The particle size got smaller as the ball milling went further; the extent of micro-strain and distortion of lattice intensified; the solid solubility of Ni and Cr in Fe was increased. Finally the super-saturated solid solution of Fe was obtained.

Structure Evolution of La(OH)3 /Fe Composite during Ball Milling

2020 ◽  
Vol 65 ◽  
pp. 123-134
Author(s):  
Samira Lalaoua ◽  
Bouguerra Bouzabata ◽  
Safia Alleg ◽  
Abedelmalik Djekoun ◽  
David Shmool
Keyword(s):  
Ball Milling ◽  
Milling Time ◽  
Magnetic Measurements ◽  
Amorphous Structure ◽  
Structure Evolution ◽  
Vibrating Sample Magnetometer ◽  
X Ray Diffraction ◽  
Scanning Calorimetry ◽  
Composite Powders ◽  
X Ray

Fe-10wt% La (OH)3 composite powders have been fabricated by ball milling, under argon atmosphere for milling periods of 0, 5 and 10 h, respectively. Changes in structural, morphological, thermal and magnetic properties of the powders during mechanical alloying and during subsequent annealing have been examined by X-ray diffraction, scanning electron microscopy (SEM), differential scanning calorimetry (DSC) and vibrating sample magnetometer (VSM). XRD results: showed the formation of new phases (Fe and LaFeO3 perovskite) created through the ball milling. The results showed that the crystalline size of ball milled powders decreased with increasing the milling time. In fact, after 10 h of ball milling, La (OH)3 changes from nanostructure in amorphous structure. The magnetic measurements display a distinct saturation magnetization and coercivity.

Microstructural Transformations of an Amorphous Fe90 Zr10 Alloy Induced by High-Energy Ball-Milling

2006 ◽  
Vol 510-511 ◽  
pp. 698-701
Author(s):  
Pyuck Pa Choi ◽  
Young Soon Kwon ◽  
Ji Soon Kim ◽  
Dae Hwan Kwon
Keyword(s):  
Ball Milling ◽  
Milling Time ◽  
High Energy ◽  
High Energy Ball Milling ◽  
X Ray Diffraction ◽  
Scanning Calorimetry ◽  
X Ray ◽  
Melt Spun ◽  
Energy Ball ◽  
Induced Crystallization

Mechanically induced crystallization of an amorphous Fe90Zr10 alloy was studied by means of X-ray diffraction (XRD) and differential scanning calorimetry (DSC). Under high-energy ball-milling in an AGO-2 mill, melt-spun Fe90Zr10 ribbons undergo crystallization into BCC α- Fe(Zr). Zr atoms are found to be solved in the Fe(Zr) grains up to a maximum supersaturation of about 3.5 at.% Zr, where it can be presumed that the remaining Zr atoms are segregated in the grainboundaries. The decomposition degree of the amorphous phase increases with increasing milling time and intensity. It is proposed that the observed crystallization is deformation-induced and rather not attribute to local temperature rises during ball-collisions.

Study on Generation of Fine Grained Titanium Aluminide Through Ball Milling of Ti, Al and Ni-P Coated Graphite Powder

2009 ◽  
Vol 67 ◽  
pp. 45-51
Author(s):  
Rohit Kumar Gupta ◽  
Vijaya Agarwala ◽  
Sunayan Thakur ◽  
Ramesh Chandra Agarwala ◽  
Bhanu Pant
Keyword(s):  
Particle Size ◽  
Ball Milling ◽  
Titanium Aluminide ◽  
Milling Time ◽  
Stoichiometric Composition ◽  
High Energy ◽  
X Ray Diffraction ◽  
Scanning Calorimetry ◽  
Final Particle ◽  
X Ray

High energy ball milling (HEBM) had been carried out to produce submicron size titanium aluminide intermetallics (TiAl) using elemental powders of Ti and Al alongwith Ni-P coated graphite. 1% graphite powders was added to stoichiometric composition of Ti48Al and ball milling was conducted for different milling time at varying rpm. The effect of milling time and rpm on particle size has been studied. The prepared samples have been characterized using X-ray diffraction, differential scanning calorimetry (DSC) and scaning elecron microscopy (SEM). Grain size as low as 500 nm could be achieved. Formation of Ti3Al, TiAl and carbon containing intermetallic compounds had been confirmed through X-ray diffraction. Milling time and rpm of mill is found to be important factors which control the final particle size.

scholarly journals Effect of Process Control Agents on the FeSiB Powder Amorphisation by Wet Mechanical Alloying

2015 ◽  
Vol 13 ◽  
pp. 37-41
Author(s):  
Bogdan Viorel Neamţu ◽  
Traian Florin Marinca ◽  
Horea Florin Chicinaş ◽  
Ionel Chicinaş ◽  
Olivier Isnard
Keyword(s):  
Thermal Stability ◽  
Differential Scanning Calorimetry ◽  
Chemical Composition ◽  
Process Control ◽  
Mechanical Alloying ◽  
Magnetic Measurements ◽  
Amorphous Powder ◽  
X Ray Diffraction ◽  
Scanning Calorimetry ◽  
X Ray

Result of research concerning the influence of milling conditions on the amorphisation of the Fe75Si20B5 (at.%) alloy is presented. Amorphous powder of Fe75Si20B5 (at.%) was prepared by dry and wet mechanical alloying (MA) route starting from a mixture of Fe, Si and B elemental powders. The mixture was wet/dry milled up to 50 hours. Benzene, oleic acid and ethanol were used as process control agents (PCA) in order to investigate the influence of their chemical composition on the powder amorphisation. The evolution of the powder crystalline structure, thermal stability and magnetic properties were investigated by X-ray diffraction (XRD), differential scanning calorimetry (DSC), thermogravimetry (TG) as well as magnetic measurements versus temperature and field. It is proved that the chemical composition of the PCA (especially the carbon content) plays an important role in the amorphisation process induced by wet MA.

Study on Amorphization of Mechanical Alloyed Cu50Zr40Ag10 Alloy

2011 ◽  
Vol 306-307 ◽  
pp. 1379-1382
Author(s):  
Lin Yan Xia ◽  
Yan Wang
Keyword(s):  
Mechanical Alloying ◽  
Amorphous Phase ◽  
Milling Time ◽  
Nearest Neighbor ◽  
Mechanical Stability ◽  
Amorphous Structure ◽  
X Ray Diffraction ◽  
Scanning Calorimetry ◽  
X Ray ◽  
Short Range Ordering

The amorphization and crystallization of mechanical alloyed Cu50Zr40Ag10 alloy have been investigated using X-ray diffraction (XRD) and differential scanning calorimetry (DSC). The results demonstrate that a full amorphous phase of Cu50Zr40Ag10 can be obtained through mechanical alloying. The amorphous phase begins to show the initial mechanical crystallization when the milling time is 108 h and subsequently the main milling product is still amorphous structure with increasing milling time up to 208 h. Therefore, the amorphous alloy exhibits the excellent mechanical stability during mechanical alloying. The nearest-neighbor distance of atoms firstly increases then reduces with the increasing milling time, indicating that there is a closely correlation between the initial crystallization behavior and short range ordering.

Mechanical properties of FeAlSi powders prepared by mechanical alloying from different initial feedstock materials

2019 ◽  
Vol 107 (2) ◽  
pp. 207 ◽  
Author(s):  
Jaroslav Čech ◽  
Petr Haušild ◽  
Miroslav Karlík ◽  
Veronika Kadlecová ◽  
Jiří Čapek ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Mechanical Alloying ◽  
Young’S Modulus ◽  
Milling Time ◽  
Young's Modulus ◽  
Element Model ◽  
X Ray Diffraction ◽  
X Ray ◽  
Powder Particles ◽  
Complete Homogenization

FeAl20Si20 (wt.%) powders prepared by mechanical alloying from different initial feedstock materials (Fe, Al, Si, FeAl27) were investigated in this study. Scanning electron microscopy, X-ray diffraction and nanoindentation techniques were used to analyze microstructure, phase composition and mechanical properties (hardness and Young’s modulus). Finite element model was developed to account for the decrease in measured values of mechanical properties of powder particles with increasing penetration depth caused by surrounding soft resin used for embedding powder particles. Progressive homogenization of the powders’ microstructure and an increase of hardness and Young’s modulus with milling time were observed and the time for complete homogenization was estimated.

Research on compatibility and surface of high impact bio-based polyamide

2021 ◽  
pp. 095400832110055
Author(s):  
Yang Wang ◽  
Yuhui Zhang ◽  
Yuhan Xu ◽  
Xiucai Liu ◽  
Weihong Guo
Keyword(s):  
Electron Microscopy ◽  
Mechanical Properties ◽  
Scanning Electron Microscopy ◽  
Differential Scanning Calorimetry ◽  
Crystallization Behavior ◽  
High Impact ◽  
X Ray Diffraction ◽  
Scanning Calorimetry ◽  
X Ray ◽  
Scanning Electron

The super-tough bio-based nylon was prepared by melt extrusion. In order to improve the compatibility between bio-based nylon and elastomer, the elastomer POE was grafted with maleic anhydride. Scanning Electron Microscopy (SEM) and Thermogravimetric Analysis (TGA) were used to study the compatibility and micro-distribution between super-tough bio-based nylon and toughened elastomers. The results of mechanical strength experiments show that the 20% content of POE-g-MAH has the best toughening effect. After toughening, the toughness of the super-tough nylon was significantly improved. The notched impact strength was 88 kJ/m2 increasing by 1700%, which was in line with the industrial super-tough nylon. X-ray Diffraction (XRD) and Differential Scanning Calorimetry (DSC) were used to study the crystallization behavior of bio-based PA56, and the effect of bio-based PA56 with high crystallinity on mechanical properties was analyzed from the microstructure.

Sign in / Sign up

Export Citation Format

Share Document