Synthesis and characterization of organic–inorganic poly(3,4-ethylenedioxythiophene)/MoS2 nanocomposite via in situ oxidative polymerization

2006 ◽  
Vol 21 (1) ◽  
pp. 112-118 ◽  
Author(s):  
A. Vadivel Murugan ◽  
Mathieu Quintin ◽  
Marie-Helene Delville ◽  
Guy Campet ◽  
Annamraju Kasi Viswanath ◽  
...  
Keyword(s):  
Photoelectron Spectroscopy ◽  
Oxidative Polymerization ◽  
X Ray Diffraction ◽  
Rechargeable Lithium Batteries ◽  
X Ray ◽  
Transmission Electron ◽  
Basal Distance ◽  
New Type

Here we demonstrate the synthesis of a new type of layered poly(3,4-ethylenedioxy- thiophene) (PEDOT)/MoS2 nanocomposite via flocculation of delaminated MoS2 with subsequent in situ oxidative polymerization of 3,4-ethylenedioxythiophene. The resulting nanocomposite was characterized by Fourier transform infrared spectroscopy, powder x-ray diffraction, x-ray photoelectron spectroscopy, thermal analysis, transmission electron microscopy, and four-probe electrical conductivity measurements with respect to temperature. X-ray diffraction results indicated that the exfoliated MoS2 and PEDOT are restacked to produce a novel nanoscale composite material containing alternate nanoribbons of PEDOT in between MoS2 with a basal distance of ∼1.38 nm. The nanocomposite, which could be used as a cathode material for small power rechargeable lithium batteries, has also been demonstrated by the electrochemical insertion of lithium into the PEDOT/MoS2 nanocomposite, where a significant enhancement in the discharge capacity is observed, compared to that of respective pristine molybdenum disulfide.

The Use of Advanced Analytical Techniques for Characterization of the Chemical, Physical, and Crystallographic Nature of a Surface

1973 ◽  
Vol 31 ◽  
pp. 132-133 ◽  
Author(s):  
R. E. Herfert
Keyword(s):  
Surface Characterization ◽  
Analytical Techniques ◽  
X Ray Diffraction ◽  
Depth Of Penetration ◽  
X Ray ◽  
The Past ◽  
Transmission Electron ◽  
Scanning Electron

Studies of the nature of a surface, either metallic or nonmetallic, in the past, have been limited to the instrumentation available for these measurements. In the past, optical microscopy, replica transmission electron microscopy, electron or X-ray diffraction and optical or X-ray spectroscopy have provided the means of surface characterization. Actually, some of these techniques are not purely surface; the depth of penetration may be a few thousands of an inch. Within the last five years, instrumentation has been made available which now makes it practical for use to study the outer few 100A of layers and characterize it completely from a chemical, physical, and crystallographic standpoint. The scanning electron microscope (SEM) provides a means of viewing the surface of a material in situ to magnifications as high as 250,000X.

Preparation and Characterization of γ-Fe2O3-ZnFe2O4 Composite Nanoparticles

2013 ◽  
Vol 873 ◽  
pp. 152-157
Author(s):  
Long Long Chen ◽  
Jun Ming Li ◽  
Xiao Min Gong ◽  
Jian Li
Keyword(s):  
Photoelectron Spectroscopy ◽  
Chemical Species ◽  
Composite Nanoparticles ◽  
X Ray Diffraction ◽  
Ferrite Core ◽  
Phase Synthesis ◽  
X Ray ◽  
Transmission Electron ◽  
Chemically Induced

Using a chemically induced transition in an FeCl2 solution, γ-Fe2O3 nanoparticles can be prepared from an amorphous precursor composed of FeOOH and Mg (OH)2. Surface modification by adding ZnCl2 during liquid-phase synthesis was attempted. The magnetization, morphology, crystal structure, and chemical species of as-prepared samples were characterized by vibrating sample magnetometer (VSM), transmission electron microscopy (TEM), X-ray diffraction (XRD), X-ray energy-dispersive spectroscopy (EDX), and X-ray photoelectron spectroscopy (XPS). The experimental results showed that the surface of the γ-Fe2O3 nanoparticles can be modified by adding ZnCl2 to form composite nanoparticles with a γ-Fe2O3/ZnFe2O4 ferrite core coated with Zn (OH)2 and absorbed FeCl36H2O; this modification can be enhanced by additional NaOH.

Synthesis and characterization of homogeneous lead-substituted tin oxide with the (110) face of rutile structure

2000 ◽  
Vol 15 (10) ◽  
pp. 2076-2079
Author(s):  
Chika Nozaki ◽  
Takashi Yamada ◽  
Kenji Tabata ◽  
Eiji Suzuki
Keyword(s):  
Electron Microscopy ◽  
Tin Oxide ◽  
Photoelectron Spectroscopy ◽  
Synthesis And Characterization ◽  
X Ray Diffraction ◽  
Rutile Structure ◽  
X Ray ◽  
Transmission Electron ◽  
Scanning Electron

Synthesis of a rutile-type lead-substituted tin oxide with (110) face was investigated. The characterization was performed by x-ray diffraction, scanning electron microscopy, transmission electron microscopy, energy dispersive x-ray spectroscopy, infrared spectroscopy, x-ray photoelectron spectroscopy, and Brunauer–Emmett–Teller surface area measurements. The homogeneous rutile-type lead-substituted tin oxide was obtained until 4.1 mol% of tin was substituted with lead. The surface of obtained oxide had a homogeneously lead-substituted (110) face.

scholarly journals Hydrogenative Cyclization of Levulinic Acid to γ-Valerolactone with Methanol and Ni-Fe Bimetallic Catalysts

Catalysts ◽  
2020 ◽  
Vol 10 (9) ◽  
pp. 1096
Author(s):  
Ligang Luo ◽  
Xiao Han ◽  
Qin Zeng
Keyword(s):  
Photoelectron Spectroscopy ◽  
Levulinic Acid ◽  
Hydrogen Donor ◽  
Effect Of Temperature ◽  
X Ray ◽  
Transmission Electron ◽  
Ft Ir ◽  
Temperature Programmed

A series of Ni-Fe/SBA-15 catalysts was prepared and tested for the catalytic hydrogenation of levulinic acid to γ-valerolactone, adopting methanol as the only hydrogen donor, and investigating the synergism between Fe and Ni, both supported on SBA-15, towards this reaction. The characterization of the synthesized catalysts was carried out by XRD (X-ray powder diffraction), TEM (transmission electron microscopy), H2-TPD (hydrogen temperature-programmed desorption), XPS (X-ray photoelectron spectroscopy), and in situ FT-IR (Fourier transform–infrared spectroscopy) techniques. H2-TPD and XPS results have shown that electron transfer occurs from Fe to Ni, which is helpful both for the activation of the C=O bond and for the dissociative activation of H2 molecules, also in agreement with the results of the in situ FT-IR spectroscopy. The effect of temperature and reaction time on γ-valerolactone production was also investigated, identifying the best reaction conditions at 200 °C and 180 min, allowing for the complete conversion of levulinic acid and the complete selectivity to γ-valerolactone. Moreover, methanol was identified as an efficient hydrogen donor, if used in combination with the Ni-Fe/SBA-15 catalyst. The obtained results are promising, especially if compared with those obtained with the traditional and more expensive molecular hydrogen and noble-based catalysts.

Characterization of Fe–Ni(C) nanocapsules synthesized by arc discharge in methane

1999 ◽  
Vol 14 (5) ◽  
pp. 1782-1790 ◽  
Author(s):  
X. L. Dong ◽  
Z. D. Zhang ◽  
S. R. Jin ◽  
W. M. Sun ◽  
X. G. Zhao ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Photoelectron Spectroscopy ◽  
Arc Discharge ◽  
Carbon Layer ◽  
Magnetization Measurement ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
Energy Disperse Spectroscopy

Ultrafine Fe–Ni(C) particles of various compositions were prepared by arc discharge synthesis in a methane atmosphere. The particles were characterized by x-ray diffraction, transmission electron microscopy, energy disperse spectroscopy, chemical analysis, x-ray photoelectron spectroscopy, Mössbauer spectroscopy, and magnetization measurement. The carbon atoms solubilizing at interstitial sites in γ–(Fe, Ni, C) solution particles have the effects of forming austenite structure and changing microstructures as well as magnetic properties. A carbon layer covers the surface of Fe–Ni(C) particles to form the nanocapsules and protect them from oxidization. The mechanism of forming Fe–Ni(C) nanocapsules in the methane atmosphere was analyzed.

Preparation and Characterization of Carbon Nanotubes/Al2O3 Inorganic Hybrid Material - A Bio-Inspired Poly(Dopamine) Approach

2018 ◽  
Vol 54 ◽  
pp. 127-135
Author(s):  
Wen Zhao ◽  
Wen Cai Wang ◽  
Yong Lai Lu ◽  
Li Qun Zhang
Keyword(s):  
Carbon Nanotubes ◽  
Aqueous Solution ◽  
Photoelectron Spectroscopy ◽  
Oxidative Polymerization ◽  
The Self ◽  
Liquid Phase Deposition ◽  
X Ray ◽  
Transmission Electron ◽  
Cnts Surface

Carbon nanotubes/alumina (CNTs/Al2O3) nanocomposites were prepared by the poly (dopamine) assisted chemical liquid phase deposition (CLPD). The poly (dopamine) layers were firstly coated on the CNTs surface uniformly by the self-oxidative polymerization of dopamine in mild aqueous solution and then the Al2O3 nanoparticles formed on the poly (dopamine) coated CNTs surface by the CLPD. The hydrophilic poly (dopamine) layers on the CNTs surface can improve the dispersion of CNTs in aqueous solution. Moreover, it can be used as a key linker between the CNTs and Al2O3 because of the nitrogen-containing group in poly (dopamine) could coordinate with Al3+ ions. The as-prepared poly (dopamine) coated CNTs and CNTs/Al2O3 nanohybrids were characterized by X-ray photoelectron spectroscopy (XPS), X-radial diffractometer (XRD) and high resolution transmission electron microscopy (HRTEM). These results showed that the poly (dopamine) layers were coated on the surface of CNTs uniformly, and the Al2O3 nanoparticles embellished with the poly (dopamine) coated CNTs surface. Compared with pristine NR composites, the thermal conductivity of the as-prepared NR/CNTs@Al2O3 composites increased 17%.

Preparation and characterization of CuInS2 nanorods and nanotubes from an elemental solvothermal reaction

2001 ◽  
Vol 16 (10) ◽  
pp. 2805-2809 ◽  
Author(s):  
Yang Jiang ◽  
Yue Wu ◽  
Shengwen Yuan ◽  
Bo Xie ◽  
Shuyuan Zhang ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Photoelectron Spectroscopy ◽  
Electron Transfer Reaction ◽  
Solvothermal Reaction ◽  
X Ray Diffraction ◽  
Spectroscopy Analysis ◽  
X Ray ◽  
Transmission Electron

A simple and convenient solvothermal reaction has been developed to produce CuInS2 nanorods and nanotubes from the elements in ethylenediamine at 280 °C. The products were characterized by x-ray diffraction, transmission electron microscopy, high-resolution transmission electron microscopy, scanning electron microscopy, and x-ray photoelectron spectroscopy. Analysis shows that the coordinating ability of ethylenediamine and the existence of liquid In may play important roles in the growth of one-dimension nanocrystallites and the electron-transfer reaction. In addition, spherical CuInS2 micrometer particles were obtained at 350 °C.

Surface nitridation of Ta powder by molten-salt electrolysis of Ta2O5 under N2 atmosphere

2020 ◽  
Vol 13 (07) ◽  
pp. 2050032
Author(s):  
Qing Huang ◽  
Guojin Zheng ◽  
Tian Wu
Keyword(s):  
Electron Microscopy ◽  
Photoelectron Spectroscopy ◽  
Cell Voltage ◽  
X Ray Diffraction ◽  
Molten Salt Electrolysis ◽  
X Ray ◽  
Structured Catalysts ◽  
Transmission Electron ◽  
N2 Atmosphere

The electro-deoxidation of Ta2O5 in molten CaCl2 under N2 atmosphere is a facile way for the in situ surface nitridation of Ta particles. The cell voltage and electrolysis time of Ta2O5 are rationalized to realize the in situ surface nitridation of Ta. All the characterization results including X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM) and elements mapping as well as X-ray photoelectron spectroscopy (XPS) confirm the formation of Ta2N layers on the surface of Ta particles, with the thickness of 3–4[Formula: see text]nm. This method provides a strategy for the facile in situ surface nitridation with N2 as the nitrogen source for the fabrication of core-shell structured catalysts.

scholarly journals Preparation and Microwave Absorption Properties of Polyaniline and Magnetite Core-Shell-Structured Hybrid

2018 ◽  
Vol 2018 ◽  
pp. 1-6 ◽  
Author(s):  
Xuan Zhang
Keyword(s):  
Microwave Absorption ◽  
Photoelectron Spectroscopy ◽  
Microwave Absorption Property ◽  
Absorption Property ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
Infrared Spectrophotometer ◽  
Aniline Polymerization

In this study, polyaniline and Fe3O4 (PAN@Fe3O4) hybrids are fabricated and their microwave absorption property is studied. PAN@Fe3O4 hybrids are fabricated by the in situ aniline polymerization at spherical of Fe3O4 which is prepared by the solvothermal process. Fourier-transform infrared spectrophotometer (FTIR), X-ray diffraction (XRD), and X-ray photoelectron spectroscopy (XPS) are applied to confirm the composition of the fabricated PAN@Fe3O4 hybrids. The morphologies of PAN@Fe3O4 hybrids are studied by scanning electron microscope (SEM) and transmission electron microscopy (TEM). The content of polyaniline in the PAN@Fe3O4 hybrids is calculated by thermogravimetric analysis (TGA). The magnetic properties of PAN@Fe3O4 hybrids are characterized by vibrating sample magnetometer (VSM). The microwave absorption property of PAN@Fe3O4 hybrids are measured on a vector network analyzer. The research show that the microwave absorptions property of the obtained PAN@Fe3O4 hybrids can be adjusted by controlling the in situ aniline polymerization at spherical of Fe3O4.

Microstructural Characterization of In Situ Reaction TiB2/Zn-30Al-1Cu Composites Prepared by Spray Deposition Process

2014 ◽  
Vol 1015 ◽  
pp. 688-691 ◽  
Author(s):  
Feng Wang ◽  
Qiang Zhang ◽  
Bai Qing Xiong ◽  
Yong An Zhang ◽  
Hong Wei Liu ◽  
...  
Keyword(s):  
Spray Deposition ◽  
Microstructural Characterization ◽  
Deposition Process ◽  
Deposition Technique ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
Scanning Electron

An innovative spray deposition technique has been applied to produce in situ TiB2/Zn-30Al-1Cu composites. The microstructures of the spray-deposited composite were studied using scanning electron microscopy, transmission electron microscope and X-ray diffraction. The results have shown that the TiB2particulates are formed in the microstructure. It was found that the TiB2particles were distributed in Zn-30Al-1Cu matrix uniformly, and the TiB2particles are about 2μm in size.

Sign in / Sign up

Export Citation Format

Share Document