Synthesis of ZnO at Different Atomic Proportion Produced by Chemical Precipitation

2012 ◽  
Vol 1481 ◽  
pp. 127-133
Author(s):  
A. Medina ◽  
L. Béjar ◽  
G. Herrera-Pérez

ABSTRACTZinc oxide (ZnO) nanoparticles were produced using chemical precipitation synthesis with a molar ratio of 1:1, 1:2 and 1:3. The structure, chemical composition and morphology were investigated by X-ray diffraction (XRD), energy dispersive spectroscopy (EDS), scanning electron microscopy (SEM), transmission electron microscopy (TEM) and high resolution transmission electron microscopy (HRTEM). XRD and EDS demonstrated that the all particles formed at different atomic proportion were of wurtzite crystal structure with the same chemical composition. SEM and TEM showed the formation of hexagonal particles with a molar ratio of 1:1 while the samples synthesized with a molar ratio 1:2 and 1:3 showed a circular shape. HRTEM and Fast Fourier Transform (FFT) demonstrated that the all particles were formed with a preferable [0001] growth direction.

2017 ◽  
Vol 727 ◽  
pp. 395-402
Author(s):  
Zi Run Wang ◽  
Xin Liu ◽  
Gui Qi Xie ◽  
Yi Wu ◽  
Ming Nie ◽  
...  

Cu-Ag alloy nanoparticles were synthesized by a liquid phase reduction method. Using sodium formaldehyde sulfoxylate (SFS) as reducing agents, copper-silver bimetallic nanoleaflets with high content of Cu were prepared. The obtained Cu-Ag bimetallic nanocrystal were characterized by powder X-ray diffraction (XRD), energy dispersive X-ray spectroscopy (EDX), field emission scanning electron microscope (FESEM), high resolution transmission electron microscopy (HRTEM) and transmission electron microscopy (TEM). Different molar ratio of Cu-Ag bimetallic nanomaterials could produce different morphologies. The surfactant β-CD plays a crucial role on the structure of the products. The different molar ratios of Cu-Ag were also investigated. The electrochemical activity was evaluated using cyclic voltammetry (CV), electrochemical hydrogen evolution reaction (HER) in a 0.5M Na2SO4 electrolyte.


2004 ◽  
Vol 848 ◽  
Author(s):  
Lidia Armelao ◽  
Davide Barreca ◽  
Gregorio Bottaro ◽  
Andrea Caneschi ◽  
Claudio Sangregorio ◽  
...  

ABSTRACTThis work is focused on the sol-gel synthesis of pure and Ca-doped LaCoO3 nanopowders. The samples were prepared starting from methanolic solutions of cobalt (II) acetate (Co(CH3COO)2·4H2O), lanthanum (III) nitrate (La(NO3)3·6H2O) and calcium (II) acetate (Ca(CH3COO)2·H2O). After solvent evaporation, the obtained powders were dried under vacuum and subsequently treated in air up to 1273 K. The system evolution under thermal annealing was studied by X-ray Diffraction (XRD) and Transmission Electron Microscopy (TEM), while the chemical composition was analyzed by X-ray Photoelectron (XPS) and X-ray Excited Auger electron (XE-AES) spectroscopies. The temperature and field dependence of the magnetic properties of the Ca-doped samples were investigated, and compared to those of the corresponding pure LaCoO3 powders.


2007 ◽  
Vol 336-338 ◽  
pp. 2037-2040
Author(s):  
Moon Hee Choi ◽  
Yoon Bok Lee ◽  
In Bae Kim ◽  
Young Seok Kim ◽  
Young Mok Rhyim ◽  
...  

Cadmium selenide (CdSe) of hollow sphere with 30-50nm in diameter have been prepared form the mixed solution of cadmium chloride (CdCl2), sodium selenosulfate(Na2SeSO3) and ethylenediamine (H2NCH2CH2NH2) at room temperature. The hollow sphere of CdSe was characterized by transmission electron microscopy (TEM), high resolution transmission electron microscopy (HRTEM) and X-ray diffraction (XRD). The molar ratio of EDA to Cd2+ ions in this system was important factor on controlled synthesis in the self-encapsulated morphology. Based on the observation on morphological difference with molar ratio of EDA to Cd2+ ion, the possible mechanism for the formation of CdSe hollow sphere was discussed.


1996 ◽  
Vol 11 (6) ◽  
pp. 1367-1372 ◽  
Author(s):  
J.C.L. Chow ◽  
P.C.W. Fung ◽  
H.M. Shao ◽  
C.C. Lam

Pb-substituted Hg-based superconductor of Hg0.66Pb0.33Ba2Ca2Cu3Oy has been fabricated using the sealed quartz tube technique. R- and x-ray diffraction pattern (XDP) measurements show that the specimen has a Tc of 135 K and contains mainly the Hg-1223 phase. Scanning electron microscopy/energy dispersive x-ray analysis (SEM/EDX) and transmission electron microscopy/energy dispersive x-ray analysis (TEM/EDX) were employed to study the texture and chemical composition of the specimen. It is found that the specimen contains round-shaped grains with a mixture of Hg-1223, BaCuO2, and Ca0.85CuO2 phases, square-shaped grains with a formula of PbBa2O3, small single crystals with single Hg-1223 phase, and crystal-like layers with a mixture of Hg-1223 and BaCuO2 phase. We consider that though the doping of Pb can benefit the stabilization of the Hg-1223 phase, it introduces other impurity phases and textures in the specimen at the same time.


2013 ◽  
Vol 2013 ◽  
pp. 1-7 ◽  
Author(s):  
M. Th. Makhlouf ◽  
B. M. Abu-Zied ◽  
T. H. Mansoure

Combustion method has been used as a fast and facile method to prepare nanocrystalline Co3O4 spinel employing sucrose as a combustion fuel. The products were characterized by thermal analyses (TGA and DTA), X-ray diffraction technique (XRD), Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), and transmission electron microscopy (TEM) techniques. Experimental results revealed that the molar ratio of fuel/oxidizer (F/O) plays an important role in controlling the crystallite size of Co3O4 nanoparticles. Transmission electron microscopy indicated that the crystallite size of Co3O4 nanocrystals was in the range of 13–32 nm. X-ray diffraction confirmed the formation of CoO phase with spinel Co3O4. The effect of calcination temperature on crystallite size and morphology has been, also, discussed.


Author(s):  
R. Gronsky

The phenomenon of clustering in Al-Ag alloys has been extensively studied since the early work of Guinierl, wherein the pre-precipitation state was characterized as an assembly of spherical, ordered, silver-rich G.P. zones. Subsequent x-ray and TEM investigations yielded results in general agreement with this model. However, serious discrepancies were later revealed by the detailed x-ray diffraction - based computer simulations of Gragg and Cohen, i.e., the silver-rich clusters were instead octahedral in shape and fully disordered, atleast below 170°C. The object of the present investigation is to examine directly the structural characteristics of G.P. zones in Al-Ag by high resolution transmission electron microscopy.


Minerals ◽  
2021 ◽  
Vol 11 (6) ◽  
pp. 611
Author(s):  
Celia Marcos ◽  
María de Uribe-Zorita ◽  
Pedro Álvarez-Lloret ◽  
Alaa Adawy ◽  
Patricia Fernández ◽  
...  

Chert samples from different coastal and inland outcrops in the Eastern Asturias (Spain) were mineralogically investigated for the first time for archaeological purposes. X-ray diffraction, X-ray fluorescence, transmission electron microscopy, infrared and Raman spectroscopy and total organic carbon techniques were used. The low content of moganite, since its detection by X-ray diffraction is practically imperceptible, and the crystallite size (over 1000 Å) of the quartz in these cherts would be indicative of its maturity and could potentially be used for dating chert-tools recovered from archaeological sites. Also, this information can constitute essential data to differentiate the cherts and compare them with those used in archaeological tools. However, neither composition nor crystallite size would allow distinguishing between coastal and inland chert outcrops belonging to the same geological formations.


Author(s):  
Eric O'Quinn ◽  
Cameron Tracy ◽  
William F. Cureton ◽  
Ritesh Sachan ◽  
Joerg C. Neuefeind ◽  
...  

Er2Sn2O7 pyrochlore was irradiated with swift heavy Au ions (2.2 GeV), and the induced structural modifications were systematically examined using complementary characterization techniques including transmission electron microscopy (TEM), X-ray diffraction...


1995 ◽  
Vol 418 ◽  
Author(s):  
J. Forbes ◽  
J. Davis ◽  
C. Wong

AbstractThe detonation of explosives typically creates 100's of kbar pressures and 1000's K temperatures. These pressures and temperatures last for only a fraction of a microsecond as the products expand. Nucleation and growth of crystalline materials can occur under these conditions. Recovery of these materials is difficult but can occur in some circumstances. This paper describes the detonation synthesis facility, recovery of nano-size diamond, and plans to synthesize other nano-size materials by modifying the chemical composition of explosive compounds. The characterization of nano-size diamonds by transmission electron microscopy and electron diffraction, X-ray diffraction and Raman spectroscopy will also be reported.


Sign in / Sign up

Export Citation Format

Share Document