Hydrogenated Nanocrystalline Silicon Thin Film Transistor Array for X-ray Detector Application

2008 ◽  
Vol 1066 ◽  
Author(s):  
Kyung-Wook Shin ◽  
Mohammad R. Esmaeili-Rad ◽  
Andrei Sazonov ◽  
Arokia Nathan

ABSTRACTHydrogenated nanocrystalline silicon (nc-Si:H) has strong potential to replace the hydrogenated amorphous silicon (a-Si:H) in thin film transistors (TFTs) due to its compatibility with the current industrial a-Si:H processes, and its better threshold voltage stability [1]. In this paper, we present an experimental TFT array backplane for direct conversion X-ray detector, using inverted staggered bottom gate nc-Si:H TFT as switching element. The TFTs employed a nc-Si:H/a-Si:H bilayer as the channel layer and hydrogenated amorphous silicon nitride (a-SiNx) as the gate dielectric; both layers deposited by plasma enhanced chemical vapor deposition (PECVD) at 280°C. Each pixel consists of a switching TFT, a charge storage capacitor (Cpx), and a mushroom electrode which serves as the bottom contact for X-ray detector such as amorphous selenium photoconductor. The chemical composition of the a-SiNx was studied by Fourier transform infrared spectroscopy. Current-voltage measurements of the a-SiNx film demonstrate that a breakdown field of 4.3 MV/cm.. TFTs in the array exhibits a field effect mobility (μEF) of 0.15 cm2/V·s, a threshold voltage (VTh) of 5.71 V, and a subthreshold leakage current (Isub) of 10−10 A. The fabrication sequence and TFT characteristics will be discussed in details.

2010 ◽  
Vol 10 (1) ◽  
pp. 184-186
Author(s):  
Hee-suk Pang ◽  
Yun-sik Jeong ◽  
Hong-Seok Choi ◽  
Chang-Wook Han ◽  
Yoon-Heung Tak ◽  
...  

1990 ◽  
Vol 192 ◽  
Author(s):  
M. Hack ◽  
W. B. Jackson ◽  
R. Lujan

ABSTRACTWe have developed a means to speed up the recovery of both the threshold voltage shift of hydrogenated amorphous silicon (a-Si:H) transistors and the Vx shift of high voltage a-Si devices. This is accomplished by placing a lightly doped compensated layer adjacent to the active layer in these transistors. This proximity recovery layer does not alter the initial characteristics of a-Si:H transistors and is completely process compatible with standard fabrication procedures.


Sign in / Sign up

Export Citation Format

Share Document