Surface Treatment of TiAl with Fluorine for Improved Performance at Elevated Temperatures

2008 ◽  
Vol 1128 ◽  
Author(s):  
A. Donchev ◽  
P.J. Masset ◽  
M. Schütze
Keyword(s):  
High Temperature ◽  
Oxidation Resistance ◽  
Elevated Temperatures ◽  
Specific Weight ◽  
High Temperature Strength ◽  
Dramatic Improvement ◽  
Surface Zone ◽  
Automotive Engines ◽  
Halogen Effect ◽  
Improved Performance

AbstractAlloys based on aluminium and titanium are possible materials for several high temperature applications. The use of TiAl would increase the efficiency of e.g. aero turbines, automotive engines and others due to their properties, among others low specific weight and good high temperature strength. The oxidation resistance is low at temperatures above approximately 800°C so that no long term use of TiAl-components is possible without improvement of the oxidation behaviour. Small amounts of halogens in the surface zone of TiAl-samples lead to a dramatic improvement of the oxidation resistance at temperatures up to 1100°C for more than 8000 hours in air. In this paper results of the work on the halogen effect over the last years are presented. The results of thermogravimetric measurements, thermocyclic oxidation tests of small coupons and thermodynamic calculations for different atmospheres (e.g. air, H2O, SO2) are shown and the halogen effect mechanism is discussed. The postulated mechanism is in good agreement with the results of the oxidation tests. The limits of the halogen effect will also be mentioned. Predictions for the halogenation of TiAl-components can be given so that the processing can be planned in advance.

Phase transformation and layer evolution in molybdenum disilicide-silicon carbide nanolayered coatings

1994 ◽  
Vol 52 ◽  
pp. 538-539
Author(s):  
H. Kung ◽  
T. R. Jervis ◽  
J.-P. Hirvonen ◽  
M. Nastasi ◽  
T. E. Mitchell ◽  
...  
Keyword(s):  
Phase Transformation ◽  
High Temperature ◽  
Oxidation Resistance ◽  
Elevated Temperatures ◽  
Matrix Material ◽  
Molybdenum Disilicide ◽  
High Temperature Strength ◽  
Cross Sectional ◽  
Good Oxidation Resistance ◽  
Structural Applications

MoSi2 is a potential matrix material for high temperature structural composites due to its high melting temperature and good oxidation resistance at elevated temperatures. The two major drawbacksfor structural applications are inadequate high temperature strength and poor low temperature ductility. The search for appropriate composite additions has been the focus of extensive investigations in recent years. The addition of SiC in a nanolayered configuration was shown to exhibit superior oxidation resistance and significant hardness increase through annealing at 500°C. One potential application of MoSi2- SiC multilayers is for high temperature coatings, where structural stability ofthe layering is of major concern. In this study, we have systematically investigated both the evolution of phases and the stability of layers by varying the heat treating conditions.Alternating layers of MoSi2 and SiC were synthesized by DC-magnetron and rf-diode sputtering respectively. Cross-sectional transmission electron microscopy (XTEM) was used to examine three distinct reactions in the specimens when exposed to different annealing conditions: crystallization and phase transformation of MoSi2, crystallization of SiC, and spheroidization of the layer structures.

HASTELLOY ALLOY X

Alloy Digest ◽  
1954 ◽  
Vol 3 (12) ◽  
Keyword(s):  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Oxidation Resistance ◽  
High Temperatures ◽  
Heat Treating ◽  
Operating Conditions ◽  
Molybdenum Alloy ◽  
High Temperature Strength ◽  
Nickel Chromium

Abstract HASTELLOY Alloy X is a nickel-chromium-iron-molybdenum alloy recommended for high-temperature applications. It has outstanding oxidation resistance at high temperatures under most operating conditions, and good high-temperature strength. This datasheet provides information on composition, physical properties, and tensile properties as well as creep. It also includes information on forming, heat treating, and machining. Filing Code: Ni-14. Producer or source: Haynes Stellite Company.

AK STEEL 441

Alloy Digest ◽  
2006 ◽  
Vol 55 (6) ◽  
Keyword(s):  
Stainless Steel ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Tensile Properties ◽  
Oxidation Resistance ◽  
Ferritic Stainless Steel ◽  
High Temperature Oxidation ◽  
High Temperature Strength ◽  
Temperature Oxidation ◽  
Temperature Performance

Abstract AK Steel 441 has good high-temperature strength, an equiaxed microstructure, and good high-temperature oxidation resistance. The alloy is a niobium-bearing ferritic stainless steel. This datasheet provides information on composition, hardness, and tensile properties as well as deformation. It also includes information on high temperature performance and corrosion resistance as well as forming and joining. Filing Code: SS-965. Producer or source: AK Steel.

MANIFLEX-FM

Alloy Digest ◽  
1974 ◽  
Vol 23 (2) ◽  
Keyword(s):  
Stainless Steel ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Austenitic Stainless Steel ◽  
Heat Treating ◽  
Combustion Products ◽  
High Temperature Strength ◽  
Automotive Engines ◽  
Good Corrosion Resistance ◽  
Temperature Performance

Abstract MANIFLEX-FM is a free-machining chromium-nickel austenitic stainless steel which offers excellent high-temperature strength and hardness with good corrosion resistance to combustion products. It is widely used exhaust components in automotive engines. This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-291. Producer or source: Carpenter.

KUBOTA HK40 and HK50

Alloy Digest ◽  
2007 ◽  
Vol 56 (10) ◽  
Keyword(s):  
High Temperature ◽  
Physical Properties ◽  
Carbon Content ◽  
Tensile Properties ◽  
Oxidation Resistance ◽  
Heat Treating ◽  
Industrial Applications ◽  
High Temperature Strength ◽  
Ni Alloys ◽  
Moderately High Temperature

Abstract Kubota alloys HK40 and HK50 are austenitic Fe-Cr-Ni alloys that have been standard heat-resistant materials for more than four decades. With moderately high temperature strength, oxidation resistance, and carburization resistance the alloys are used in a wide variety of industrial applications. HK 50 has slightly higher carbon content. This datasheet provides information on composition, physical properties, and tensile properties as well as creep. It also includes information on casting, heat treating, machining, and joining. Filing Code: SS-998. Producer or source: Kubota Metal Corporation, Fahramet Division.

Permodur 4742

Alloy Digest ◽  
2018 ◽  
Vol 67 (4) ◽  
Keyword(s):  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Oxidation Resistance ◽  
Heat Treating ◽  
High Temperature Strength ◽  
Aluminum Addition

Abstract Permodur 4742 is an alloy with good high temperature strength and oxidation resistance and has an aluminum addition. The alloy is also called Ferrotherm 4742 at Edelstahlwerke Südwestfalen GmbH. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on forming, heat treating, machining, and joining. Filing Code: SS-1284. Producer or source: Deutsche Edelstahlwerke.

Oxidation Behaviors of Pure Ti Thermal Plasma Spray Coated Mo-Si-B Alloys

2011 ◽  
Vol 695 ◽  
pp. 365-368 ◽  
Author(s):  
Young Ho Song ◽  
Joon Sik Park ◽  
Jeong Min Kim ◽  
Seong Hoon Yi
Keyword(s):  
High Temperature ◽  
Oxidation Resistance ◽  
Alloy System ◽  
Underlying Mechanism ◽  
High Temperature Strength ◽  
Air Atmosphere ◽  
Elemental Component ◽  
Ti Powder ◽  
Poor Oxidation Resistance ◽  
Oxidation Behaviors

Mo-Si-B alloys have been received an attention due to the high temperature strength and phase stability. However, the nature of poor oxidation resistance often limits the application of the alloy system. The unstable MoO3 phase is naturally produced when the alloys were exposed at low and /or high temperature in an air atmosphere. In order to resolve the poor oxidation resistance of the alloy system, several attempts have been made via surface coatings and/or component additions. In this study, the oxidation behaviors of the Ti powder thermal spray coated Mo-Si-B alloys have been investigated in order to identify the underlying mechanism for the effect of precursor Ti coatings on Mo-Si-B alloys. The oxidation tests performed at 1100 °C show that the Ti powder was tightly bonded and reacted with the surface of the substrate, and TiO2 layer was formed at the outer surface of the coated Ti layer as a result of oxidation exposure. The oxidation behaviors of pure elemental component coated Mo-Si-B alloys have been discussed in terms of microstructural observations during oxidation tests.

Low-Density, High-Temperature Co Base Superalloys

2021 ◽  
Vol 51 (1) ◽  
Author(s):  
Surendra Kumar Makineni ◽  
Mahander Pratap Singh ◽  
Kamanio Chattopadhyay
Keyword(s):  
High Temperature ◽  
Elevated Temperatures ◽  
Ternary Alloys ◽  
Specific Yield ◽  
Annual Review ◽  
Publication Date ◽  
High Temperature Strength ◽  
Low Density ◽  
Face Centered Cubic ◽  
Alloy Development

Co base superalloys strengthened by coherent L12 ordered γ′ precipitate in a disordered face-centered cubic γ matrix represent a new opportunity for high-temperature alloy development. The emergence of alloys with low density and high specific yield strength at elevated temperatures has further energized the research and development efforts in the last 5 years. Initially stabilized by the addition of small amounts of Nb and Ta, these new generations of alloys with multiple alloying additions to form basic quaternary and ternary alloys have steadily expanded the property envelopes to raise hope for a modern class of superalloys with higher-temperature capabilities. This article reviews the work of a vibrant set of researchers across the globe whose findings are constantly unlocking the potential of these alloys. These developments have achieved high-temperature strength (at 870°C) >0.6 GPa, γ′ solvus temperature exceeding 1,100°C, and densities between 7.8 and 8.6 g/cm3. Expected final online publication date for the Annual Review of Materials Science, Volume 51 is August 2021. Please see http://www.annualreviews.org/page/journal/pubdates for revised estimates.

Mechanical Properties and Microstructure of the Newly Developed Steel (Low C 18Cr-11Ni-3Cu-Mo-Nb-B-N) After Aging Treatment

2020 ◽  
Author(s):  
Nao Otaki ◽  
Tomoaki Hamaguchi ◽  
Takahiro Osuki ◽  
Yuhei Suzuki ◽  
Masaki Ueyama ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
High Temperature ◽  
Vickers Hardness ◽  
Elevated Temperatures ◽  
Rupture Strength ◽  
Aging Treatment ◽  
High Strength ◽  
High Temperature Strength ◽  
Short Term ◽  
Rich Phase

Abstract In petroleum refinery plants, materials with high sensitization resistance are required. 347AP has particularly been developed for such applications and shows good sensitization resistance owing to its low C content. However, further improvement in high temperature strength is required for high temperature operations in complex refineries, such as delayed cokers. Recently, a new austenitic stainless steel (low C 18Cr-11Ni-3Cu-Mo-Nb-B-N, UNS No. S34752) with high sensitization resistance and high strength at elevated temperatures has been developed. In this study, the mechanical properties and microstructures of several aged specimens will be reported. By conducting several aging heat treatments in the range of 550–750 °C for 300–10,000 h on the developed steel, it was revealed that there were only few coarse precipitates that assumed sigma phase even after aging at 750 °C for 10,000 h. This indicates that the newly developed steel has superior phase stability. The developed steel drastically increased its Vickers hardness by short-term aging treatments. Through transmission electron microscopy observations, the fine precipitates of Cu-rich phase were observed dispersedly in the ruptured specimen. Therefore, the increase in Vickers hardness in short-term aging is possibly owing to the dispersed precipitation of Cu-rich phase. There was further increase in Vickers hardness owing to Z phase precipitation; however, the increment was smaller than that caused by Cu-rich phase. The newly developed alloy demonstrated excellent creep rupture strength even in the long-term tests of approximately 30,000 h, which is attributed to these precipitates.

Sign in / Sign up

Export Citation Format

Share Document