Shape Memory Behavior and Mechanical Properties of NiMn and Ni(Mn,X) Alloys

1991 ◽  
Vol 246 ◽  
Author(s):  
W.S. Yang ◽  
D.E. Mikkola
Keyword(s):  
Mechanical Properties ◽  
Transition Temperature ◽  
Shape Memory ◽  
Room Temperature ◽  
Shape Recovery ◽  
Transformation Temperatures ◽  
Room Temperature Ductility ◽  
Substitutional Solute ◽  
Ternary Element ◽  
High Transition

AbstractPotential high transition temperature shape memory alloys based on NiMn have been studied with emphasis on the shape recovery, transformation temperatures and mechanical properties. Binary NiMn, which has been reported to be brittle, has a low shape recovery, but this can be increased with Al or Ti additions. Also, the transformation temperature can be changed and the room temperature ductility improved by ternary element additions. The various substitutional solute characteristics affecting the shape recovery, the transformation temperatures, and the ductility have been examined.

scholarly journals Nanoscale Mechanical Properties of Nanoindented Ni48.8Mn27.2Ga24 Ferromagnetic Shape Memory Thin Film

Scanning ◽  
2017 ◽  
Vol 2017 ◽  
pp. 1-5
Author(s):  
Xiaofei Fu ◽  
Chao Liu ◽  
Xili Lu ◽  
Xianli Li ◽  
Jingwei Lv ◽  
...  
Keyword(s):  
Thin Film ◽  
Mechanical Properties ◽  
Martensitic Transformation ◽  
Magnetron Sputtering ◽  
Shape Memory ◽  
Room Temperature ◽  
Shape Recovery ◽  
Recovery Ratio ◽  
Dc Magnetron Sputtering ◽  
Ferromagnetic Shape Memory

The structure and nanoscale mechanical properties of Ni48.8Mn27.2Ga24 thin film fabricated by DC magnetron sputtering are investigated systematically. The thin film has the austenite state at room temperature with the L21 Hesuler structure. During nanoindentation, stress-induced martensitic transformation occurs on the nanoscale for the film annealed at 823 K for 1 hour and the shape recovery ratio is up to 85.3%. The associated mechanism is discussed.

Effects of ionic liquid types on the tribological, mechanical, and thermal properties of ionic liquid modified graphene/polyimide shape memory composites

2021 ◽  
pp. 095400832199676
Author(s):  
Yuting Ouyang ◽  
Qiu Zhang ◽  
Xiukun Liu ◽  
Ruan Hong ◽  
Xu Xu ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Ionic Liquid ◽  
Composite Materials ◽  
Shape Memory ◽  
Recovery Rate ◽  
Shape Recovery ◽  
Graphene Nanosheets ◽  
Mechanical And Thermal Properties ◽  
Thermal And Mechanical Properties ◽  
Modified Graphene

Different ionic liquid modified graphene nanosheets (IG) were induced into polyimide (PI) to improve the tribological, thermal, and mechanical properties of shape memory IG/PI composites. The results demonstrated that when using 1-aminoethyl-3-methylimidazole bromide to modify graphene nanosheets (IG-1), the laser-driven shape recovery rate of IG-1/PI composites (IGPI-1) reached 73.02%, which was 49.36% higher than that of pure PI. In addition, the IGPI-1 composite materials reached the maximum shape recovery rate within 15 s. Additionally, under dry sliding, the addition of IG can significantly improve the tribological properties of composite materials. IGPI-1 exhibited the best self-lubricating properties. Compared with pure PI, the friction coefficient (0.19) and wear rate (2.62 × 10–5) mm3/Nm) were reduced by 44.1% and 24.2%, respectively, and the T10% of IGPI-1 increased by 32.2°C. The Tg of IGPI-1 reached 256.5°C, which was 8.4°C higher than that of pure PI. In addition, the tensile strength and modulus of IGPI-1 reached 82.3 MPa and 1.18 GPa, which were significantly increased by 33.6% and 29.8%, respectively, compared with pure PI. We hope that this work will be helpful for the preparation of shape memory materials with excellent tribological, thermal, and mechanical properties.

Mechanical properties of nickel beryllides

1989 ◽  
Vol 4 (6) ◽  
pp. 1347-1353 ◽  
Author(s):  
T. G. Nieh ◽  
J. Wadsworth ◽  
C. T. Liu
Keyword(s):  
Crystal Structure ◽  
Mechanical Properties ◽  
Elastic Properties ◽  
Room Temperature ◽  
Vickers Microhardness ◽  
Interstitial Oxygen ◽  
Equiatomic Composition ◽  
Room Temperature Ductility ◽  
Hardness Increase ◽  
Microhardness Tester

The elastic properties of nickel beryllide have been evaluated from room temperature to 1000 °C. The room temperature modulus is measured to be 186 GPa, which is relatively low by comparison with other B2 aluminides such as NiAl and CoAl. Hardness measurements were carried out on specimens that had compositions over the range from 49 to 54 at. % Be, using both a Vickers microhardness tester and a nanoindentor. It was found that the hardness of NiBe exhibits a minimum at the equiatomic composition. This behavior is similar to that of aluminides of the same crystal structure, e.g., NiAl and CoAl. The effect of interstitial oxygen on the hardness of NiBe has also been studied and the results show that the presence of oxygen in NiBe can cause a significant increase in hardness. It is demonstrated that the hardness increase for the off-stoichiometric compositions is primarily caused by interstitial oxygen and can only be attributed partially to anti-site defects generated in off-stoichiometric compositions. Nickel beryllides appear to have some intrinsic room temperature ductility, as evidenced by the absence of cracking near hardness indentations.

Pseudoelasticity of Cu-13.8Al-Ni Alloys Containing V and Nb

2008 ◽  
Vol 59 ◽  
pp. 101-107 ◽  
Author(s):  
Rodinei Medeiros Gomes ◽  
Ana Cris R. Veloso ◽  
V.T.L. Buono ◽  
Severino Jackson Guedes de Lima ◽  
Tadeu Antonio de Azevedo Melo
Keyword(s):  
Mechanical Properties ◽  
Shape Memory ◽  
Shape Recovery ◽  
Cold Water ◽  
Low Cost ◽  
Tensile Tests ◽  
Grain Refiner ◽  
Good Shape ◽  
Potential Applications ◽  
Superelastic Behavior

Polycrystalline copper-based shape memory alloys have been of particular interest in relation to Ni-Ti because of their low cost and good shape memory effect. Nevertheless the absence of a pronounced pseudoelasticity effect restricts the number of potential applications. In this work, the influence of Nb and V on the microstructure and the mechanical properties was investigated. Samples of Cu-13.8 Al-Ni containing V and Nb alloy were prepared by induction and solution treated at 850°C and then further quenched into cold water. The addition of Nb and V promotes the formation of precipitates which act as grain refiner and subsequently improve the mechanical properties. The tensile tests were performed at temperatures slightly inferior to Mf and superior to Af, to investigate the shape recovery and pseudoelasticity, respectively. Based on the analyses of the Cu-13,8Al-2Ni-1Nb (wt%) alloy was detected rupture strains greater than 14%, besides observation of the superelasticity of these alloys and quantification of this property by means of cycling, from 0 to strains between 1 and 7%. The studies performed on alloy Cu-13.8Al- 3,5Ni-1V (wt%) made it possible to determine rupture strains in the order of 3% and its superelastic behavior through cycling for deformations between 1 and 3%.

Effect of Nitrogen Addition on TiNi Shape Memory Alloys

2020 ◽  
Vol 12 (9) ◽  
pp. 1403-1408
Author(s):  
Izaz Ur Rehman ◽  
Tae-Hyun Nam
Keyword(s):  
Mechanical Properties ◽  
Shape Memory Alloys ◽  
Shape Memory ◽  
Tensile Tests ◽  
Nitrogen Addition ◽  
Ternary Alloys ◽  
X Ray Diffraction ◽  
Transformation Temperatures ◽  
Arc Melting ◽  
Type Phase

In present paper we will show how nitrogen effects microstructures, transformation temperatures, and mechanical properties of equiatomic Ti50–Ni50 and Ti-rich Ti51–Ni49 binary shape memory alloys. 0.5 at.% of nitrogen was added to prepare Ti50–Ni49.5–N0.5, and Ti51–Ni48.5–N0.5 (at.%) alloys by arc-melting. Microstructures were investigated by scanning electron microscope (SEM), phase constitutions were investigated by X-ray diffraction (XRD), transformation temperatures were investigated by differential scanning calorimeter (DSC) and mechanical properties were tested by tensile tests. Solutions treated Ti–Ni–N shape memory alloys contain TiNi matrix without nitrogen, Ti2Ni type phase containing a small amount of nitrogen and a new Ti2N type phase containing a small amount of nickel. Compared with Ti50–Ni50 and Ti51–Ni49 binary alloys, the martensitic transformation starts temperatures (Ms) of Ti50–Ni49.5–N0.5 and Ti51–Ni48.5–N0.5 ternary alloys decreased from 63.4 °C to 41.6 °C and from 85.3 °C to 79.4 °C, respectively. By adding N, fracture strain decreased and incomplete superelasticity was observed.

Characristics of Shape Memory Composites Combined with Shape Memory Alloy and Shape Memory Polymer

2013 ◽  
Vol 705 ◽  
pp. 169-172
Author(s):  
Xue Feng ◽  
Li Min Zhao ◽  
Xu Jun Mi
Keyword(s):  
Shape Memory ◽  
Room Temperature ◽  
Shape Recovery ◽  
Volume Fraction ◽  
Shape Memory Polymer ◽  
Young Modulus ◽  
Thermomechanical Properties ◽  
The Matrix ◽  
Shape Memory Composites ◽  
Shape Fixity

In order to develop high functionality of shape memory materials, the shape memory composites combined with TiNi wire and shape memory epoxy were prepared, and the mechanical and thermomechanical properties were studied. The results showed the addition of TiNi wire increased the Young modulus and breaking strength both at room temperature and at elevated temperature. The composites maintained the rates of shape fixity and shape recovery close to 100%. The maximum recovery stress increased with increasing TiNi wire volume fraction, and obtained almost 3 times of the matrix by adding 1vol% TiNi wire.

scholarly journals A review of recent developments in Fe3Al-based alloys

1991 ◽  
Vol 6 (8) ◽  
pp. 1779-1805 ◽  
Author(s):  
C.G. McKamey ◽  
J.H. DeVan ◽  
P.F. Tortorelli ◽  
V.K. Sikka
Keyword(s):  
Mechanical Properties ◽  
Room Temperature ◽  
Iron Aluminides ◽  
Alloy Development ◽  
Sharp Drop ◽  
Environmental Embrittlement ◽  
Room Temperature Ductility ◽  
Structural Applications ◽  
Recent Developments ◽  
Mechanical Properties And Corrosion

Fe3Al-based iron aluminides have been of interest for many years because of their excellent oxidation and sulfidation resistance. However, limited room temperature ductility (<5%) and a sharp drop in strength above 600 °C have limited their consideration for use as structural materials. Recent improvements in tensile properties, especially improvements in ductility produced through control of composition and microstructure, and advances in the understanding of environmental embrittlement in intermetallics, including iron aluminides, have resulted in renewed interest in this system for structural applications. The purpose of this paper is to summarize recent developments concerning Fe3Al-based aluminides, including alloy development efforts and environmental embrittlement studies. This report will concentrate on literature published since about 1980, and will review studies of fabrication, mechanical properties, and corrosion resistance that have been conducted since that time.

Investigation of Ageing Phenomena in CuAlNi Based Shape Memory Alloys

2007 ◽  
Vol 537-538 ◽  
pp. 129-136 ◽  
Author(s):  
Marton Benke ◽  
Valéria Mertinger ◽  
E. Nagy ◽  
Jan Van Humbeeck
Keyword(s):  
Martensitic Transformation ◽  
Shape Memory Alloys ◽  
Shape Memory ◽  
Ternary Alloy ◽  
Room Temperature ◽  
Beta Phase ◽  
Heat Treatments ◽  
Thermoelastic Martensitic Transformation ◽  
Transformation Temperatures ◽  
Exothermic Process

The ageing phenomena and its effect on the thermoelastic martensitic transformation was investigated in three Cu-base SMAs. The transformation temperatures shifted to higher temperatures due to aging in the beta-phase. To increase the alloy’s ductility, a definite amount of Mn (4 wt%) and Fe (2 wt%) were added to the ternary alloy. The thermoelastic martensitic transformation was found in the not-aged samples of the CuAlNiMn and CuAlNiMnFe alloys. This transformation was destroyed due to ageing heat treatments by a fairly unknown exothermic process. The thermoelastic martensitic transformation appeared again in the aged CuAlNiMn and CuAlNiMnFe samples after keeping them on room temperature for a few months. This phenomena was investigated by DSC, SEM, TEM, and XRD.

Effect of Aging Process on Microstructure and Room Temperature Ductility of TB6 Titanium Alloy

2014 ◽  
Vol 1061-1062 ◽  
pp. 567-570
Author(s):  
Cui Ye ◽  
Fei Zhao ◽  
Fang Zhou ◽  
Ni Li ◽  
Jun Shuai Li
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Titanium Alloy ◽  
Aging Time ◽  
Aging Temperature ◽  
Aging Process ◽  
Room Temperature ◽  
Room Temperature Ductility ◽  
Tb6 Titanium Alloy

Microstructure and room temperature ductility of the TB6 titanium alloy was investigated by varying the aging temperature and the aging time.The results show that, the alloy’s contraction of area increases while the tensile strength firstly increases and then decreases by raising their aging temperature. In general, the ductility of the samples increases and the strength decreases with the increasing aging time. The optimum mechanical properties are obtained by aging at 650 °C for 2 h.

Sign in / Sign up

Export Citation Format

Share Document