Interactions of Dislocations and Deformation Twins with Interfacial Boundaries in Titanium Aluminides

1993 ◽  
Vol 319 ◽  
Author(s):  
Fritz Appel ◽  
Richard Wagner
Keyword(s):  
Shear Deformation ◽  
Titanium Aluminide ◽  
Titanium Aluminides ◽  
Deformation Behaviour ◽  
Lamellar Microstructure ◽  
High Resolution Electron Microscopy ◽  
Misfit Dislocations ◽  
Two Phase ◽  
Deformation Twins ◽  
Resolution Electron

AbstractThe deformation behaviour of two-phase titanium aluminide alloys with a lamellar microstructure of the intermetallic phases α2(Ti3Al) and y(TiAl) was studied. The interaction processes of dislocations and deformation twins, respectively, with the lamellar interfaces are investigated by conventional and high-resolution electron microscopy. The mechanisms of translation of shear deformation across, the lamellar boundaries depend on their structure. Semicoherent interfaces are very effective barriers limiting the propagation of shear deformation. The misfit dislocations present at these interfaces support, on the other hand, the generation of dislocations and deformation twins. The observed processes are discussed regarding plastic deformation and crack propagation in the material.

The Structure and Stress State of Lamellar Interfaces in Two-Phase Titanium Aluminides

1993 ◽  
Vol 318 ◽  
Author(s):  
Fritz Appel ◽  
Ulrich Christoph ◽  
Richard Wagner
Keyword(s):  
Titanium Aluminide ◽  
Titanium Aluminides ◽  
Lattice Mismatch ◽  
Deformation Behaviour ◽  
Lamellar Microstructure ◽  
Misfit Strain ◽  
Shear Stresses ◽  
Dislocation Loops ◽  
Two Phase ◽  
Interfacial Dislocations

ABSTRACTTitanium aluminide alloys with compositions slightly on the Ti-rich side of stoichiometry consist of the intermetallic phases α2 (Ti3Al) and γ(TiAl). The two phases form a lamellar microstructure with various types of coherent and semicoherent interfaces. The lattice mismatch occurring at the semicoherent interfaces is largely accommodated by networks of interfacial dislocations. Nevertheless, a significant homogeneous straining seems to remain at these interfaces, resulting in long-range residual stresses. The present paper reports an electron microscope study of the correlation between the misfit strain of adjacent lamellae and the atomic structure of the interfaces. The residual coherency stresses were determined by analyzing the curvature of dislocation loops which were emitted from the network of the interfacial dislocations. The estimated stresses are close to the shear stresses applied during macroscopic deformation experiments. The effects of these stresses on the deformation behaviour of the material are discussed.

Stress Induced Structural Changes of Interphase Boundaries and Mechanical Twins in two-Phase γ-Titanium Aluminides

1996 ◽  
Vol 466 ◽  
Author(s):  
F. Appel ◽  
R. Wagner
Keyword(s):  
Titanium Aluminide ◽  
Structural Changes ◽  
Titanium Aluminides ◽  
Elevated Temperatures ◽  
High Resolution Electron Microscopy ◽  
Two Phase ◽  
Resolution Electron ◽  
Interphase Boundaries ◽  
Deformation Stress ◽  
Mechanical Twins

ABSTRACTConventional and high-resolution electron microscopy has been used to examine the interfacial structures in (α2 + γ) titanium aluminide alloys. Accommodation of misfit which arises because of differences in lattice parameters and crystal structure leads to dense structures of interfacial dislocations and coherency stresses. During deformation stress induced structural changes of misfitting interfaces occur. These are closely related to the generation of perfect and twinning partial dislocations. At elevated temperatures diffusion controlled structural changes take place at an atomic level and seem to limit the structural stability of the material.

Atomistic Processes of Phase Transformation and Dynamic Recrystallization during Hot-Working of Intermetallic Titanium Aluminides

2007 ◽  
Vol 558-559 ◽  
pp. 465-470
Author(s):  
Fritz Appel ◽  
Michael Oehring ◽  
Jonathan H.D. Paul
Keyword(s):  
Phase Transformation ◽  
Dynamic Recrystallization ◽  
Titanium Aluminide ◽  
Titanium Aluminides ◽  
Equilibrium Phase ◽  
High Resolution Electron Microscopy ◽  
Hot Working ◽  
Atomic Scale ◽  
Resolution Electron ◽  
Deformation State

Intermetallic titanium aluminide alloys are multiphase assemblies with complex microstructure and constitution, involving the phases γ(TiAl), α2(Ti3Al), β, and B2. The earlier stages of phase transformation and dynamic recrystallization occurring upon hot-working of such an alloy were investigated at the atomic scale by high-resolution electron microscopy. Accordingly, the conversion of the microstructure is triggered by heterogeneities in the deformation state and non-equilibrium phase composition. The β/B2 phase is apparently unstable under tetragonal distortion, which gives rise to the formation of the B19 phase via distinct shuffle displacements. These processes lead to a modulated microstructure, which is comprised of several stable and metastable phases. The phase transformations are accomplished by the propagation and coalescence of ledges. Large and broad ledges can apparently easily be rearranged into intermediate metastable structures, which serve as precursor for the nucleation of new grains.

Microstructure and interfaces in TiB2/Ti-46Al-3Cr Alloy Composites

1995 ◽  
Vol 410 ◽  
Author(s):  
Weimin Si ◽  
Michael Dudley ◽  
Pengxing Li ◽  
Renjie Wu
Keyword(s):  
Electron Microscopy ◽  
Titanium Aluminide ◽  
Analytical Electron Microscopy ◽  
Lattice Misfit ◽  
High Resolution Electron Microscopy ◽  
Amorphous Layer ◽  
Two Phase ◽  
Titanium Aluminide Alloy ◽  
Resolution Electron ◽  
Crystallographic Orientation Relationship

ABSTRACTA ternary titanium aluminide alloy, Ti-46Al-3Cr (at%), was discontinuously reinforced with 5 vol% titanium diboride (TiB2), by an in-situ synthesis technique, resulting in a two phase γ(TiAl) (mainly) and α2(Ti3Al) matrix with randomly dispersed TiB2 particle. Interfaces of TiB2-TiAl were investigated by Analytical Electron Microscopy (AEM) and High Resolution Electron Microscopy (HREM). No consistent crystallographic orientation relationship was observed between TiB2 particle and TiAl matrix, and there was no evidence of alloying elements (such as Cr) segregation or interphase formation at the TiB2-TiAl interface. HREM results indicated that no semi-coherent interface between TiB2 and TiAl has been observed. There existed a thin amorphous layer (0.5 to 1.3 nm) at the TiB2-TiAl interface, which may accommodate the large lattice misfit across the interface and enhance the interfacial bonding.

Twinning in Crack Tip Plasticity of Two-Phase Titanium Aluminides

2000 ◽  
Vol 646 ◽  
Author(s):  
Fritz Appel
Keyword(s):  
Titanium Aluminide ◽  
Titanium Aluminides ◽  
Crack Tip ◽  
High Resolution Electron Microscopy ◽  
Strength Properties ◽  
Mechanical Twinning ◽  
Atomic Scale ◽  
Two Phase ◽  
Design Concepts ◽  
Crack Tip Plasticity

ABSTRACTIntermetallic titanium aluminides based on γ(TiAl) are prone to cleavage fracture on low index lattice planes. Unfavourably oriented grains may therefore provide easy crack paths so that the cracks can rapidly grow to a length which is critical for failure. The effect of crack tip plasticity on crack propagation in γ(TiAl) was investigated by conventional and high-resolution electron microscopy. Crack tip shielding due to mechanical twinning was recognized as toughening mechanism, which occur at the atomic scale and apparently is capable to stabilize fastly growing cracks. The potential of the mechanism will be discussed in the context of novel design concepts for improving the strength properties of γ-base titanium aluminide alloys.

Static and Dynamic Strain Ageing in Two-Phase Gamma Titanium Aluminides

2000 ◽  
Vol 646 ◽  
Author(s):  
U. Christoph ◽  
F. Appel
Keyword(s):  
Titanium Aluminide ◽  
Titanium Aluminides ◽  
Deformation Behaviour ◽  
Dynamic Strain ◽  
Dynamic Strain Ageing ◽  
Two Phase ◽  
Fast Kinetics ◽  
Strain Ageing ◽  
Wide Range ◽  
Dislocation Pinning

ABSTRACTThe deformation behaviour of two-phase titanium aluminides was investigated in the intermediate temperature interval 450–750 K where the Portevin-LeChatelier effect occurs. The effect has been studied by static strain ageing experiments. A wide range of alloy compositions was investigated to identify the relevant defect species. Accordingly, dislocation pinning occurs with fast kinetics and is characterized by a relatively small activation energy of 0.7 eV, which is not consistent with a conventional diffusion process. Furthermore, the strain ageing phenomena are most pronounced in Ti-rich alloys. This gives rise to the speculation that antisite defects are involved in the pinning process. The implications of the ageing processes on the deformation behaviour of two-phase titanium aluminide alloys will be discussed.

High-resolution Electron Microscopy characterization of chemically derived titanium aluminide nanomaterials

1994 ◽  
Vol 52 ◽  
pp. 756-757
Author(s):  
Y.-M. Pan ◽  
P. P. Paul ◽  
S. T. Schwab
Keyword(s):  
Electron Microscopy ◽  
High Resolution ◽  
Titanium Aluminide ◽  
Titanium Aluminides ◽  
High Resolution Electron Microscopy ◽  
Full Potential ◽  
Resolution Electron ◽  
Microscopy Characterization ◽  
Hexane Solution

Titanium aluminides are a class of intermetallics whose application to a variety of advanced structures may yield substantial improvements in system performance. Before titanium aluminides can realize their full potential, a number of deficiencies such as lack of ductility must be overcome through improved processing. Difficulties inherent in traditional methods have prompted the development of the ultrastructure approach to materials processing. Chemical processing has best potential for ultrastructure control because articles are constructed from atomic level up. The availability of nanostructured materials may be essential to the development of intermetallics with acceptable levels of ductility. The focus of this work is to use high resolution electron microscopy (HREM) techniques to characterize the structure and chemistry of the chemically-derived, nanocrystalline intermetallic powders that have potential to enable ultrastructure processing of advanced intermetallics and alloys.In an attempt to produce salt-free TiAl3, a dilute hexane solution of Ti[N(SiMe3)2]3 was combined with an excess of (AIH3) at room temperature to yield a very fine, steel-gray powder.

Point Defect Mechanisms in Deformation and Phase Transformation of Titanium Aluminide Alloys

2002 ◽  
Vol 753 ◽  
Author(s):  
Fritz Appel ◽  
Jonathan D.H. Paul ◽  
Ulrich Fröbel
Keyword(s):  
Phase Transformation ◽  
Point Defects ◽  
Titanium Aluminide ◽  
High Resolution Electron Microscopy ◽  
Transport Processes ◽  
Two Phase ◽  
Structural Characterisation ◽  
Resolution Electron ◽  
Term Creep ◽  
Titanium Aluminide Alloys

ABSTRACTPoint defects in intermetallic compounds are subjected to significant constraints due to the directional bonding, long-range order and off-stoichiometric deviation of the materials. This leads to a variety of defects with distinct differences in morphology, concentration and mobility. In the present study the implications of these defect characteristics on the mechanical properties of two-phase titanium aluminide alloys will be investigated. The major areas of the study are: (i) deformation induced point defects that contribute to work hardening; (ii) dislocation locking due to the formation of defect atmospheres; (iii) transport processes involved in phase transformation and recrystallization occurring during long-term creep. The applied methods include mechanical testing, static strain aging and structural characterisation by high resolution electron microscopy.

HIGH RESOLUTION ELECTRON MICROSCOPE STUDY OF CdTe-Cd0.6Mn0.4 Te SUPERLATTICES

1985 ◽  
Vol 56 ◽  
Author(s):  
C. CHOI ◽  
N. OTSUKA ◽  
L. A. KOLODZIEJSKI ◽  
R. L. GUNSHOR-a
Keyword(s):  
Electron Microscopy ◽  
High Resolution ◽  
Phase Contrast ◽  
Electron Microscope Study ◽  
Lattice Mismatch ◽  
Thick Layer ◽  
High Resolution Electron Microscopy ◽  
Misfit Dislocations ◽  
Resolution Electron ◽  
High Resolution Electron Microscope

AbstractStructures of CdTe-Cd0.6Mn0.4Te superlattices which are caused by the lattice mismatch between suterlattice layers have been studied by high resolution electron microscopy (HREM). In thin-layer superlattices, the crystal lattice in each layeris elastically distorted, resulting in the change of the crystal symmetry from cubic to rhombohedral. The presence of the small rhombohedral distrotion has been confirmed through a phase contrast effect in HREM images. In a thick-layer superlattice, the lattice mismatch is accommodated by dissociated misfit dislocations. Burgers vectors of partial misfit dislocations have been identified from the shift of lattice fringes in HREM images.

scholarly journals Protected Gold Nanoparticles with Thioethers and Amines As Surrogate Ligands

2013 ◽  
Vol 2013 ◽  
pp. 1-4 ◽  
Author(s):  
M. Rafiq H. Siddiqui
Keyword(s):  
Gold Nanoparticles ◽  
Variable Temperature ◽  
Size Control ◽  
Analytical Techniques ◽  
High Resolution Electron Microscopy ◽  
Phase Method ◽  
Two Phase ◽  
H Nmr ◽  
Resolution Electron ◽  
Vis Spectroscopy

Dodecyl sulfide, dodecyl amine, and hexylamine were shown to act as surrogate ligands (L) via metastable gold nanoparticles. By collating analytical and spectroscopic data obtained simultaneously, empirical formula Au24L was assigned. These impurity-free nanoparticles obtained in near quantitative yields showing exceptional gold assays (up to 98%Au) were prepared by a modification of the two-phase method. Replacement reactions on the Au24L showed that Au:L ratios may be increased (up to Au55:L (L= (H25C12)2S)) or decreased (Au12:L (L= H2NC12H25and H2NC6H13)) as desired. This work encompassing the role of analytical techniques used, that is, elemental analysis, variable temperature1H NMR, FAB mass spectrometry, UV-Vis spectroscopy, thin film X-ray diffraction, and high-resolution electron microscopy (HREM) has implications in the study of size control, purity, stability, and metal assays of gold nanoparticles.

Sign in / Sign up

Export Citation Format

Share Document