Strain Relaxation in Heteroepitaxial Si1-xGex Films via Surface Roughening Processes

1995 ◽  
Vol 399 ◽  
Author(s):  
Cengiz S. Ozkan ◽  
William D. Nix ◽  
Huajian Gao

ABSTRACTSurface roughening associated with strain relaxation of Si1-xGex films grown epitaxially on (100) Si substrates has been investigated using transmission electron microscopy, atomic force microscopy and x-ray diffraction. Epitaxial films 100 Å in thickness and containing 18% Ge, which are subcritical with respect to the formation of misfit dislocations, show strain relaxation through surface roughening on annealing at 700 °C. Enhanced surface grooves aligned along <100> directions are observed in films annealed at 850 °C. Strain relaxation as measured by x-ray diffraction is significantly greater at the higher temperature. Prolonged anneals at 850 °C also result in islanding. The surface roughening processes have also been studied in subcritical films with 15% Ge at 900 °C. These films also show enhanced grooving aligned along <100> directions. These observations are consistent with an anisotropic elastic analysis which indicates that grooving should occur preferentially along <100> directions. Intermixing effects in these samples have also been investigated through depth profiling using Auger Electron Spectroscopy. In addition to the above subcritical films, other films with 18% and 22% Ge and supercritical thicknesses have also been studied. For these films, surface grooving is observed along <110> directions, which suggests that these grooves are related to the formation of misfit dislocation networks. The role of these surface roughening processes in the nucleation of dislocations has also been explored.

1999 ◽  
Vol 588 ◽  
Author(s):  
A. Cremades ◽  
M. Albrecht ◽  
J. M. Ulloa ◽  
J. Piqueras ◽  
H. P. Strunk ◽  
...  

AbstractA series of 100 nm thick InGaN films with In content up to 14% has been grown by MOVPE on SiC substrates. Optical characterization was carried out by means of reflectance spectrometry, photoluminescence and cathodoluminescence. Optical properties of the samples have been correlated with the microstructural properties measured by atomic force microscopy, transmission electron microscopy and X-ray diffraction data. Results indicate a dependence of the optical properties on the In content in the sample, as well as on the residual stress in the films induced by Indium incorporation. Part of the strain is reduced elastically by formation of pinholes which reach the InGaN/GaN interface, where first misfit dislocations are observed to form. Our results show that luminescence is directly correlated with the strain distribution in the layers. Pinholes are observed to act as nonradiative recombination sites for carriers, while strain relaxation around pinholes may enhance luminescence emission. We discuss the influence of strain with respect to In incorporation, the appearance of piezoelectric fields and effects due to strain induced band bending.


2008 ◽  
Vol 600-603 ◽  
pp. 211-214 ◽  
Author(s):  
Andrea Severino ◽  
Christopher L. Frewin ◽  
Ruggero Anzalone ◽  
Corrado Bongiorno ◽  
Patrick Fiorenza ◽  
...  

In this work a comparison between atmospheric pressure (AP) and low pressure (LP) carbonization as the first step in the growth process of 3C-SiC on Si substrates is presented. Three different Si substrate orientations have been studied and compared. Characterization analysis has been performed by Atomic Force Microscopy (AFM), X-ray Diffraction Spectroscopy (XRD) and Transmission Electron Microscopy (TEM). XRD and AFM analysis show a lower roughness and a better quality for LPCVD carbonized samples. Substrate orientation plays an important role both in the generation as well as in the effect of such defects in the subsequent growth process, leading to a rougher SiC surface for growth on (110) Si while micro-twin effects are limited for growth on (111) Si, resulting in an extremely flat film.


2003 ◽  
Vol 780 ◽  
Author(s):  
C. Essary ◽  
V. Craciun ◽  
J. M. Howard ◽  
R. K. Singh

AbstractHf metal thin films were deposited on Si substrates using a pulsed laser deposition technique in vacuum and in ammonia ambients. The films were then oxidized at 400 °C in 300 Torr of O2. Half the samples were oxidized in the presence of ultraviolet (UV) radiation from a Hg lamp array. X-ray photoelectron spectroscopy, atomic force microscopy, and grazing angle X-ray diffraction were used to compare the crystallinity, roughness, and composition of the films. It has been found that UV radiation causes roughening of the films and also promotes crystallization at lower temperatures.Furthermore, increased silicon oxidation at the interface was noted with the UVirradiated samples and was shown to be in the form of a mixed layer using angle-resolved X-ray photoelectron spectroscopy. Incorporation of nitrogen into the film reduces the oxidation of the silicon interface.


1999 ◽  
Vol 594 ◽  
Author(s):  
M. E. Ware ◽  
R. J. Nemanich

AbstractThis study explores stress relaxation of epitaxial SiGe layers grown on Si substrates with unique orientations. The crystallographic orientations of the Si substrates used were off-axis from the (001) plane towards the (111) plane by angles, θ = 0, 10, and 22 degrees. We have grown 100nm thick Si(1−x) Ge(x) epitaxial layers with x=0.3 on the Si substrates to examine the relaxation process. The as-deposited films are metastable to the formation of strain relaxing misfit dislocations, and thermal annealing is used to obtain highly relaxed films for comparison. Raman spectroscopy has been used to measure the strain relaxation, and atomic force microscopy has been used to explore the development of surface morphology. The Raman scattering indicated that the strain in the as-deposited films is dependent on the substrate orientation with strained layers grown on Si with 0 and 22 degree orientations while highly relaxed films were grown on the 10 degree substrate. The surface morphology also differed for the substrate orientations. The 10 degree surface is relatively smooth with hut shaped structures oriented at predicted angles relative to the step edges.


1994 ◽  
Vol 358 ◽  
Author(s):  
K. Dovidenko ◽  
S. Oktyabrsky ◽  
J. Narayan ◽  
M. Razeghi

ABSTRACTThe microstructural characteristics of wide band gap semiconductor, hexagonal A1N thin films on Si(100), (111), and sapphire (0001) and (10ī2) were studied by transmission electron microscopy (TEM) and x-ray diffraction. The films were grown by MOCVD from TMA1 + NH3 + N2 gas mixtures. Different degrees of film crystallinity were observed for films grown on α-A12O3 and Si substrates in different orientations. The epitaxial growth of high quality single crystalline A1N film on (0001) α-Al2O3 was demonstrated with a dislocation density of about 2*10 10cm−2 . The films on Si(111) and Si(100) substrates were textured with the c-axis of A1N being perpendicular to the substrate surface.


1999 ◽  
Vol 597 ◽  
Author(s):  
M. Siegert ◽  
Judit G. Lisoni ◽  
C. H. Lei ◽  
A. Eckau ◽  
W. Zander ◽  
...  

AbstractIn the process of developing thin film electro-optical waveguides we investigated the influence of different substrates on the optical and structural properties of epitaxial BaTiO3 thin films. These films are grown by on-axis pulsed laser deposition (PLD) on MgO(100), MgAl2O4(100), SrTiO3(100) and MgO buffered A12O3(1102) substrates. The waveguide losses and the refractive indices were measured with a prism coupling setup. The optical data are correlated to the results of Rutherford backscattering spectrometry/ion channeling (RBS/C). X-ray diffraction (XRD), atomic force microscopy (AFM) and transmission electron microscopy (TEM). BaTiO3 films on MgO(100) substrates show planar waveguide losses of 3 dB/cm and ridge waveguide losses of 5 dB/cm at a wavelength of 633 nm.


2020 ◽  
Vol MA2020-02 (24) ◽  
pp. 1750-1750
Author(s):  
Andrea Quintero Colmenares ◽  
Patrice Gergaud ◽  
Jean-Michel Hartmann ◽  
Vincent Delaye ◽  
Nicolas Bernier ◽  
...  

1999 ◽  
Vol 583 ◽  
Author(s):  
Martin Schmidbauer ◽  
Thomas Wiebach ◽  
Helmut Raidt ◽  
Peter Schäfer ◽  
Michael hanke ◽  
...  

AbstractThe strain distribution inside and in the vicinity of coherently strained self-organized islands has been investigated by high-resolution x-ray diffraction (HRXRD). Finite element method (FEM) calculations were carried out in order to calculate the strain field, which was then used to simulate x-ray reciprocal space maps on the basis of kinematical scattering theory. For Si0 75Ge0.25 islands an abrupt increase in the Ge-concentration at about one third of the island height has been found. This behavior can be attributed to different nucleation stages during growth. Highly strained buried CdSe quantum dots (QDs) strongly influence the surrounding ZnSe matrix. From reciprocal space maps and FEM simulations we were able to estimate the shape and size of the islands. The results are in agreement with transmission electron microscopy (TEM) and UHV atomic force microscopy (AFM) data.


Nano LIFE ◽  
2014 ◽  
Vol 04 (04) ◽  
pp. 1441014 ◽  
Author(s):  
Qi Liu ◽  
Weiping Hao ◽  
Yongguang Yang ◽  
Aurore Richel ◽  
Canbin Ouyang ◽  
...  

Nanocrystalline celluloses (NCCs) were separated from four commercial microcrystalline celluloses (MCCs) by an acid hydrolysis–sonication treatment. Transmission electron microscopy (TEM), atomic force microscopy (AFM), Fourier transform infrared (FTIR) spectrum, X-ray diffraction (XRD) and thermogravimetric analysis (TGA) were conducted to investigate the NCCs. MCCs with different morphologies and particle sizes showed different aggregation degrees. The aggregation of MCCs followed the order MCC1 > MCC3 > MCC2 > MCC4, which is the same order of the heights of the resulting NCCs. The best uniformity and thermal stability were characterized for NCC3, which was produced by MCC3 with smallest original particle size and good dispersity among the four MCCs. This result suggests that both the original particle size and dispersity of MCCs had significant effects on separated NCCs.


Sign in / Sign up

Export Citation Format

Share Document