Deposition and Electrical Characterization of Epitaxial Pb(Mg1/3Nb2/3)O3-PbTiO3 (70/30) Thin Films

1997 ◽  
Vol 493 ◽  
Author(s):  
J-P. Maria ◽  
Wes Hackenberger ◽  
S. Trolier-McKinstry
Keyword(s):  
Dielectric Constant ◽  
Electrical Properties ◽  
Pulsed Laser ◽  
Electrical Characterization ◽  
Piezoelectric Actuators ◽  
Laser Deposition ◽  
Processing Conditions ◽  
X Ray Diffraction ◽  
X Ray

ABSTRACT(001)-oriented heterostructures consisting of LaAlCO3 substrates, SrRuO3 bottom electrodes, and Pb(Mg1/3Nb2/3) O3-PbTiO3 (PMN-PT) piezoelectric actuators were deposited by pulsed laser deposition (PLD). 4-circle x-ray diffraction analysis confirmed the epitaxial growth of each layer. In general, the electrical properties were found to be very sensitive to the processing conditions, in particular, the growth temperature. At growth temperatures below ∼620°C, the temperature dependence of the dielectric constant and the onset of a hysteritic polarization were found to be depressed by as much as 80 °C. When growth temperatures were increased above 660°C, electrical properties with temperature dependencies more consistent with those of single crystals were observed.

Microstructural and Electrical Characterization of Barium Strontium Titanatebased Solid Solution Thin Films Deposited on Ceramic Substrates by Pulsed Laser Deposition

2002 ◽  
Vol 720 ◽  
Author(s):  
Costas G. Fountzoulas ◽  
Daniel M. Potrepka ◽  
Steven C. Tidrow
Keyword(s):  
Thin Films ◽  
Dielectric Constant ◽  
Pulsed Laser Deposition ◽  
Pulsed Laser ◽  
Electrical Characterization ◽  
Field Variable ◽  
Laser Deposition ◽  
X Ray Diffraction ◽  
Ceramic Substrates ◽  
Nominal Thickness

AbstractFerroelectrics are multicomponent materials with a wealth of interesting and useful properties, such as piezoelectricity. The dielectric constant of the BSTO ferroelectrics can be changed by applying an electric field. Variable dielectric constant results in a change in phase velocity in the device allowing it to be tuned in real time for a particular application. The microstructure of the film influences the electronic properties which in turn influences the performance of the film. Ba0.6Sr0.4Ti1-y(A 3+, B5+)yO3 thin films, of nominal thickness of 0.65 μm, were synthesized initially at substrate temperatures of 400°C, and subsequently annealed to 750°C, on LaAlO3 (100) substrates, previously coated with LaSrCoO conductive buffer layer, using the pulsed laser deposition technique. The microstructural and physical characteristics of the postannealed thin films have been studied using x-ray diffraction, scanning electron microscopy, and nano indentation and are reported. Results of capacitance measurements are used to obtain dielectric constant and tunability in the paraelectric (T>Tc) regime.

Characterization of CdCrTe Layers Obtained by Pulsed Laser Deposition

2013 ◽  
Vol 203-204 ◽  
pp. 193-197
Author(s):  
Piotr Sagan ◽  
Volodymyr Popovych ◽  
Mariusz Bester ◽  
Marian Kuzma
Keyword(s):  
Solid Solution ◽  
Electron Diffraction ◽  
Lattice Constant ◽  
Pulse Length ◽  
Pulsed Laser ◽  
Thin Layers ◽  
Laser Deposition ◽  
X Ray Diffraction ◽  
X Ray

In this paper we have obtained CdCrTe thin layers by PLD method using the YAG:Nd3+ laser with pulse length 250μs. Synthesized CdCrTe solid solution with 50% at. of Cr has been taken as a target. The layers were deposited on KCl substrate. The target and films were analyzed using X-ray diffraction, TEM microscope and THEED electron diffraction. The morphology of the layers are homogenous. However, we have detected several crystallographic phases: cubic CdTe, hexagonal Cr and hexagonal Te. From the measurements of lattice constant of the layer, their composition was determined to be x=0,14

Texturing and Dielectric Properties of Laser Deposited BaTiO3 Thin Films Grown on Heated Substrates

1991 ◽  
Vol 243 ◽  
Author(s):  
M.D. Vaudin ◽  
L.P. Cook ◽  
W. Wong-Ng ◽  
P.K. Schenck ◽  
P.S. Brody ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Thin Films ◽  
Dielectric Properties ◽  
Electrical Properties ◽  
Pulsed Laser ◽  
Laser Deposition ◽  
Silicon Substrates ◽  
X Ray Diffraction ◽  
Electrical Measurements ◽  
X Ray

AbstractThin films of BaTiO3 were deposited on platinum-coated silicon substrates using pulsed laser deposition and characterized using electron microscopy, powder x-ray diffraction and electrical measurements. The microstructure consisted of columnar BaTiO3 grains oriented normal to the substrate. Two preferred orientations were observed, with either the (001) or (111) planes of BaTiO3 being parallel to the substrate. The electrical properties of two films were measured and it was found that the (111) film was ferroelectric and the (001) film was not. Possible reasons for this are discussed.

Single- and Multi-target Pulsed Laser Deposition of Thin BSTO films: Preparation, Microstructure and Electrical Properties

2003 ◽  
Vol 784 ◽  
Author(s):  
Kumaravinothan Sarma ◽  
Peter Kr. Petrov ◽  
Neil McN. Alford
Keyword(s):  
Thin Film ◽  
Electrical Properties ◽  
Pulsed Laser Deposition ◽  
Pulsed Laser ◽  
Film Surface ◽  
Laser Deposition ◽  
X Ray Diffraction ◽  
X Ray ◽  
Structural And Electrical Properties ◽  
Capacitor Structure

ABSTRACTA comparative study of microstructure and electrical properties of BaxSr1-xTiO3 films made by single- and multi-target pulsed laser deposition was carried out. The films were epitaxially grown on both LaAlO3 and MgO substrates. The structural properties of all samples were investigated using X-ray diffraction and Raman spectroscopy. The elemental composition of the samples was investigated using energy dispersive X-ray analysis. For electrical properties examination, a simple capacitor structure was patterned on the film surface. Thin films made using both methods exhibit similar structural and electrical properties; however the samples made by a multi-target method underwent phase transition in a broader temperature region. The results prove the possibility of using the multi-target pulse laser deposition as a more flexible method for engineering thin film stoichometry.

Effect of Cu Dopant on the Electrical Property of ZnO Thin Films Deposited by Pulsed Laser Deposition

2007 ◽  
Vol 124-126 ◽  
pp. 339-342
Author(s):  
Gun Hee Kim ◽  
Hong Seong Kang ◽  
Dong Lim Kim ◽  
Hyun Woo Chang ◽  
Byung Du Ahn ◽  
...  
Keyword(s):  
Thin Films ◽  
Electrical Properties ◽  
Pulsed Laser Deposition ◽  
Pulsed Laser ◽  
Laser Deposition ◽  
Zno Thin Films ◽  
X Ray Diffraction ◽  
X Ray ◽  
Doped Zno ◽  
Deposition Conditions

Cu-doped ZnO (denoted by ZnO:Cu) films have been prepared by pulsed laser deposition using 3 wt. CuO doped ZnO ceramic target. The carrier concentrations (1011~1018 cm-3) and, electrical resistivity (10-1~105 cm) of deposited Cu-doped ZnO thin films were varied depending on deposition conditions. Variations of electrical properties of Cu-doped ZnO indicate that copper dopants may play an important role in determining their electrical properties, compared with undoped films. To investigate effects of copper dopants on the properties of ZnO thin films, X-Ray diffraction (XRD), photoluminescence (PL), and Hall measurements have been performed and corresponded.

scholarly journals Synthesis and Characterization of 〖(CdO)〗_(1-x) 〖Mg〗_x films by pulsed laser deposition

2020 ◽  
Vol 18 (45) ◽  
pp. 59-67
Author(s):  
Jasim Mohamad Hussain ◽  
Awatif S Jasim ◽  
Kadhim Abdulwahid Aadim
Keyword(s):  
Absorption Coefficient ◽  
Energy Gap ◽  
Cadmium Oxide ◽  
Pulsed Laser ◽  
Laser Deposition ◽  
X Ray Diffraction ◽  
Structural And Optical Properties ◽  
Optical Energy Gap ◽  
X Ray

In this study, the effect of grafting with magnesium (Mg) ratios (0.1, 0.3, 0.5) on the structural and optical properties of cadmium oxide films (CdO) was studied, as these films were prepared on glass bases using the method of pulse laser deposition (PLD). The crystallization nature of the prepared membranes was examined by X-ray diffraction technique (XRD), which showed that the synthesis of the prepared membranes is polycrystalline, and (AFM) images also showed that the increased deformation with magnesium led to an increase in the grain size ratio and a decrease in surface roughness, as well as the absorption coefficient was calculated. And the optical energy gap for the prepared membranes, where it was found that the absorption coefficient increases with the increase in the proportion of vaccination and that the energy gap decreases with increasing rates of vaccination.

Growth and characterization of c-axis oriented LiNbO3 film on a transparent conducting Al:ZnO inter-layer on Si

2004 ◽  
Vol 19 (8) ◽  
pp. 2235-2239 ◽  
Author(s):  
Vinay Gupta ◽  
P. Bhattacharya ◽  
Yu. I. Yuzyuk ◽  
R.S. Katiyar ◽  
Monika Tomar ◽  
...  
Keyword(s):  
Dielectric Constant ◽  
Room Temperature ◽  
Alternate Current ◽  
Laser Deposition ◽  
Ac Conductivities ◽  
Crystal Data ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transparent Conducting

C-axis oriented lithium niobate (LiNbO3) films were deposited by pulsed-laser deposition on silicon using a transparent conducting interlayer of aluminum (Al)-doped zinc oxide (ZnO). Only two x-ray diffraction reflections corresponding to (006) and (0012) planes of LiNbO3 were observed in the films deposited at a 100-mTorr oxygen pressure and a 450–500 °C substrate temperature. Presence of sharp modes corresponding to E(TO) and A(LO), and absence of any superfluous peaks mainly around 900–905 cm−1 in the Raman spectra confirmed the formation of textured LiNbO3 film. Measured value of direct current and alternate current (AC) conductivities and dielectric constant are 8.6 × 10-12 Ω−1cm-1, 1.16 × 10-6 Ω−1cm-1, and 29.3, respectively, at room temperature. Behavior of dielectric constant and AC conductivity with frequency and temperature are close to the reported single-crystal data.

Polydomain Structure of Epitaxial PbTiO3 films on MgO

1997 ◽  
Vol 493 ◽  
Author(s):  
S. P. Alpay ◽  
A. S. Prakash ◽  
S. Aggarwal ◽  
R. Ramesh ◽  
A. L. Roytburd ◽  
...  
Keyword(s):  
Domain Structure ◽  
Pulsed Laser ◽  
Laser Deposition ◽  
X Ray Diffraction ◽  
X Ray ◽  
Theoretical Predictions ◽  
The Stability ◽  
Increasing Temperature ◽  
Stable Domains ◽  
Domain Stability

ABSTRACTA PbTiO3(001) film grown on MgO(001) by pulsed laser deposition is examined as an example to demonstrate the applications of the domain stability map for epitaxial perovskite films which shows regions of stable domains and fractions of domains in a polydomain structure. X-ray diffraction studies indicate that the film has a …c/a/c/a… domain structure in a temperature range of °C to 400°C with the fraction of c-domains decreasing with increasing temperature. These experimental results are in excellent agreement with theoretical predictions based on the stability map.

Frequency and Temperature Dependence of Dielectric Properties of Orthorhombic HoMnO3 Thin Films

2014 ◽  
Vol 1025-1026 ◽  
pp. 427-431
Author(s):  
Ping Gao ◽  
Wei Zhang ◽  
Wei Tian Wang
Keyword(s):  
Dielectric Properties ◽  
Pulsed Laser ◽  
Signal Amplitude ◽  
Debye Model ◽  
Laser Deposition ◽  
X Ray Diffraction ◽  
X Ray ◽  
Force Microscopy ◽  
Atomic Force ◽  
Cole Diagram

Orthorhombic HoMnO3 films were prepared epitaxially on Nb-doped SrTiO3 single crystal substrates by using pulsed laser deposition technique. The films showed perfectly a-axis crystallographic orientations. X-ray diffraction and atomic force microscopy were used to characterize the films. The complex dielectric properties were measured as functions of frequency (40 Hz~1 MHz) and temperature (80 K~300 K) with a signal amplitude of 50 mv. The respective dielectric relaxation peaks shifted to higher frequency as the measuring temperature increased, with the same development of real part of the complex permittivity. The cole-cole diagram was obtained according to the Debye model, and the effects of relaxation process were discussed.

Study of Raman Spectrum of Fe Doped CeO2 Thin Films Grown by Pulsed Laser Deposition

2010 ◽  
Vol 123-125 ◽  
pp. 375-378 ◽  
Author(s):  
Ram Prakash ◽  
Shalendra Kumar ◽  
Chan Gyu Lee ◽  
S.K. Sharma ◽  
Marcelo Knobel ◽  
...  
Keyword(s):  
Thin Films ◽  
Pulsed Laser Deposition ◽  
Single Phase ◽  
Pulsed Laser ◽  
Laser Deposition ◽  
Fe Doping ◽  
Full Width ◽  
Deposition Technique ◽  
X Ray Diffraction ◽  
X Ray

Ce1-xFexO2 (x=0, 0.01, 0.03 and 0.0 5) thin films were grown by pulsed laser deposition technique on Si and LaAlO3 (LAO) substrates. These films were deposited in vacuum and 200 mTorr oxygen partial pressure for both the substrates. These films were characterized by x-ray diffraction XRD and Raman spectroscopy measurements. XRD results reveal that these films are single phase. Raman results show F2g mode at ~466 cm-1 and defect peak at 489 cm-1 for film that deposited on LAO substrates, full width at half maximum (FWHM) is increasing with Fe doping for films deposited on both the substrates.

Sign in / Sign up

Export Citation Format

Share Document