A Possible Basis for Nondestructive Characterization of Ropes of Nylon 6

1997 ◽  
Vol 503 ◽  
Author(s):  
H. Jiang ◽  
M. K. Davis ◽  
R. K. Eby ◽  
P. Arsenovic
Keyword(s):  
Tensile Strength ◽  
Service Life ◽  
Fiber Diameter ◽  
Structural Parameters ◽  
Crystal Form ◽  
Nylon 6 ◽  
Remaining Service Life ◽  
Nondestructive Characterization ◽  
Fractional Content

ABSTRACTPhysical properties and structural parameters have been measured for ropes of nylon 6 as a function of the number of use operations. The fractional content of the α crystal form, sound velocity, birefringence, tensile strength and length all increase systematically and significantly with increasing the number of use operations. The fractional content of the γ crystal form and fiber diameter decrease with use. These trends indicate that the measurement of such properties and structural parameters, especially the length, provide a possible basis for establishing a reliable, rapid, and convenient nondestructive characterization method to predict the remaining service life of nylon 6 ropes.

scholarly journals Assessment of Durability Indicators of Flexible Pavements on the Basis of the Mechanical-Statistical Method

2018 ◽  
Vol 196 ◽  
pp. 01020 ◽  
Author(s):  
Artem Tiraturyan ◽  
Evgeniya Uglova
Keyword(s):  
Service Life ◽  
Statistical Method ◽  
Mathematical Expectation ◽  
Structural Parameters ◽  
Flexible Pavements ◽  
Operating Life ◽  
Remaining Service Life ◽  
Method Of Assessment

The article gives a brief overview of the developed mechanical-statistical method of assessment of durability indicators of flexible pavements. It contains the main prerequisites of the study and the results of the study of the change in the indicators of mathematical expectation and variance of the main structural parameters of flexible pavements while in operation. Implementation of this method is illustrated with the example of calculation of the gamma-percentile remaining service life and operating life of the pavement.

Processing and Characterization of Polyphenylene Ether/Polystyrene/Nylon-6 Ternary Blends

2020 ◽  
Vol 35 (2) ◽  
pp. 169-183 ◽  
Author(s):  
P. Hadimani ◽  
H. N. Narasimha Murthy ◽  
R. Mudbidre
Keyword(s):  
Nylon 6 ◽  
Ternary Blends

Preparation and Characterization of β-glucosidase Films for Stabilization and Handling in Dry Configurations

2020 ◽  
Vol 21 (8) ◽  
pp. 741-747
Author(s):  
Liguang Zhang ◽  
Yanan Shen ◽  
Wenjing Lu ◽  
Lengqiu Guo ◽  
Min Xiang ◽  
...  
Keyword(s):  
Tensile Strength ◽  
Protein Function ◽  
Protein Stabilization ◽  
Functional Protein ◽  
Elongation At Break ◽  
Gelatin Films ◽  
The Stability ◽  
And Function ◽  
General Method

Background: Although the stability of proteins is of significance to maintain protein function for therapeutical applications, this remains a challenge. Herein, a general method of preserving protein stability and function was developed using gelatin films. Method: Enzymes immobilized onto films composed of gelatin and Ethylene Glycol (EG) were developed to study their ability to stabilize proteins. As a model functional protein, β-glucosidase was selected. The tensile properties, microstructure, and crystallization behavior of the gelatin films were assessed. Result: Our results indicated that film configurations can preserve the activity of β-glucosidase under rigorous conditions (75% relative humidity and 37°C for 47 days). In both control films and films containing 1.8 % β-glucosidase, tensile strength increased with increased EG content, whilst the elongation at break increased initially, then decreased over time. The presence of β-glucosidase had a negligible influence on tensile strength and elongation at break. Scanning electron-microscopy (SEM) revealed that with increasing EG content or decreasing enzyme concentrations, a denser microstructure was observed. Conclusion: In conclusion, the dry film is a promising candidate to maintain protein stabilization and handling. The configuration is convenient and cheap, and thus applicable to protein storage and transportation processes in the future.

Small angle X-ray scattering study of porosity variation in a styrene-divinylbenzene copolymer

1981 ◽  
Vol 46 (7) ◽  
pp. 1675-1681 ◽  
Author(s):  
Josef Baldrian ◽  
Božena N. Kolarz ◽  
Henrik Galina
Keyword(s):  
Small Angle ◽  
Structural Parameters ◽  
Two Phase ◽  
X Ray ◽  
Porosity Variation ◽  
Swelling Agent ◽  
X Ray Scattering ◽  
Styrene Divinylbenzene ◽  
Ray Scattering

Porosity variations induced by swelling agent exchange were studied in a styrene-divinylbenzene copolymer. Standard methods were used in the characterization of copolymer porosity in the dry state and the results were compared with related structural parameters derived from small angle X-ray scattering (SAXS) measurements as developed for the characterization of two-phase systems. The SAXS method was also used for porosity determination in swollen samples. The differences in the porosity of dry samples were found to be an effect of the drying process, while in the swollen state the sample swells and deswells isotropically.

Fabrication and Characterization of Biocomposite Using Grewia Optiva Fibre (i.e. Bhimal) Reinforced Polyvinyl Alcohol (PVA)

2015 ◽  
Vol 1105 ◽  
pp. 51-55 ◽  
Author(s):  
K.M. Gupta ◽  
Kishor Kalauni
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Natural Fibre ◽  
Fabrication Method ◽  
View Point ◽  
Engineering Material ◽  
Fibre Composites ◽  
Grewia Optiva ◽  
Fabrication And Characterization

Bhimal fibres are quite a newer kind of bio-degradable fibres. They have never been heard before in literatures from the view point of their utility as engineering material. These fibres have been utilized for investigation of their properties. Characterization of this fibre is essential to determine its properties for further use as reinforcing fibre in polymeric, bio-degradable and other kinds of matrix. With this objective, the fabrication method and other mechanical properties of Bhimal-reinforced-PVA biocomposite have been discussed. The stress-strain curves and load-deflection characteristics are obtained. The tensile, compressive, flexure and impact strengths have been calculated. The results are shown in tables and graphs. The results obtained are compared with other existing natural fibre biocomposites. From the observations, it has been concluded that the tensile strength of Bhimal-reinforced-PVA biocomposite is higher than other natural fibre composites. Hence these can be used as reinforcement to produce much lighter weight biocomposites.

Sign in / Sign up

Export Citation Format

Share Document