Effect of V/III Ratio on the Properties of GaN Layers Grown by Molecular Beam Epitaxy Using NH3

1998 ◽  
Vol 512 ◽  
Author(s):  
N. Grandjean ◽  
M. Leroux ◽  
J. Massies ◽  
M. Mesrine ◽  
P. Lorenzini
Keyword(s):  
Molecular Beam Epitaxy ◽  
Molecular Beam ◽  
Flux Ratio ◽  
Buffer Layers ◽  
Force Microscopy ◽  
Sapphire Substrates ◽  
Atomic Force ◽  
Piezoelectric Field ◽  
Secondary Ion

ABSTRACTAmmonia as nitrogen precursor has been used to grow III-V nitrides by molecular beam epitaxy (MBE) on c-plane sapphire substrates. The efficiency of NH3 has been evaluated allowing the determination of the actual V/III flux ratio used during the GaN growth. The effects of the V/III ratio variation on the GaN layer properties have been investigated by photoluminescence (PL), Hall measurements, atomic force microscopy (AFM), and secondary ion mass spectroscopy (SIMS). It is found that a high V/III ratio leads to the best material quality. Optimized GaN thick buffer layers have been used to grow GaN/AlGaN quantum well (QW) heterostructures. Their PL spectra exhibit well resolved emission peaks for QW thicknesses varying from 3 to 15 monolayers. From the variation of the QW energies as a function of well width, a piezoelectric field of 450 kV/cm is deduced.

Dislocation reduction with quantum dots in GaN grown on sapphire substrates by molecular beam epitaxy

2002 ◽  
Vol 722 ◽  
Author(s):  
David J. Smith ◽  
Daming Huang ◽  
Michael A Reshchikov ◽  
Feng Yun ◽  
T. King ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Atomic Force Microscopy ◽  
Molecular Beam ◽  
Buffer Layers ◽  
Force Microscopy ◽  
Sapphire Substrates ◽  
Atomic Force ◽  
Transmission Electron ◽  
Aln Buffer

AbstractWe have investigated a novel approach for improving GaN crystal quality by utilizing a stack of quantum dots (QDs) in GaN grown on sapphire substrates by molecular beam epitaxy. The GaN films were grown on GaN/AlN buffer layers containing multiple QDs and characterized using x-ray diffraction, photoluminescence, atomic force microscopy, and transmission electron microscopy. The density of the dislocations in the films was determined by defect delineation wet chemical etching and atomic force microscopy. It was found that the insertion of a set of multiple GaN QD layers in the buffer layer effectively reduced the density of the dislocations in the epitaxial layers. As compared to a density of ∼1010cm-2in typical GaN films grown on AlN buffer layers, a density of ∼3×107cm-2was demonstrated in GaN films grown with the QD layers. Transmission electron microscopy observations confirmed termination of threading dislocations by the QD layers.

Structural and Optical Properties of InAsSbBi Grown by Molecular Beam Epitaxy on Offcut GaSb Substrates

Photonics ◽  
2021 ◽  
Vol 8 (6) ◽  
pp. 215
Author(s):  
Rajeev R. Kosireddy ◽  
Stephen T. Schaefer ◽  
Marko S. Milosavljevic ◽  
Shane R. Johnson
Keyword(s):  
Molecular Beam Epitaxy ◽  
Molecular Beam ◽  
Optical Quality ◽  
X Ray Diffraction ◽  
Interface Quality ◽  
Force Microscopy ◽  
Atomic Force ◽  
Transmission Electron ◽  
Lateral Variations

Three InAsSbBi samples are grown by molecular beam epitaxy at 400 °C on GaSb substrates with three different offcuts: (100) on-axis, (100) offcut 1° toward [011], and (100) offcut 4° toward [011]. The samples are investigated using X-ray diffraction, Nomarski optical microscopy, atomic force microscopy, transmission electron microscopy, and photoluminescence spectroscopy. The InAsSbBi layers are 210 nm thick, coherently strained, and show no observable defects. The substrate offcut is not observed to influence the structural and interface quality of the samples. Each sample exhibits small lateral variations in the Bi mole fraction, with the largest variation observed in the on-axis growth. Bismuth rich surface droplet features are observed on all samples. The surface droplets are isotropic on the on-axis sample and elongated along the [011¯] step edges on the 1° and 4° offcut samples. No significant change in optical quality with offcut angle is observed.

scholarly journals Dielectric Function of AlN Grown on Si (111) by MBE

1999 ◽  
Vol 572 ◽  
Author(s):  
Stefan Zollner ◽  
Atul Konkar ◽  
R. B. Gregory ◽  
S. R. Wilson ◽  
S. A. Nikishin ◽  
...  
Keyword(s):  
Molecular Beam ◽  
Buffer Layers ◽  
Two Dimensional ◽  
X Ray Diffraction ◽  
Growth Morphology ◽  
X Ray ◽  
Force Microscopy ◽  
Atomic Force ◽  
Dimensional Growth ◽  
Peak Widths

ABSTRACTWe measured the ellipsometric response from 0.7–5.4 eV of c-axis oriented AlN on Si (111) grown by molecular beam epitaxy. We determine the film thicknesses and find that for our AlN the refractive index is about 5–10% lower than in bulk AlN single crystals. Most likely, this discrepancy is due to a low film density (compared to bulk AlN), based on measurements using Rutherford backscattering. The films were also characterized using atomic force microscopy and x-ray diffraction to study the growth morphology. We find that AlN can be grown on Si (111) without buffer layers resulting in truely two-dimensional growth, low surface roughness, and relatively narrow x-ray peak widths.

scholarly journals Hexagonal Boron Nitride Tunnel Barriers Grown on Graphite by High Temperature Molecular Beam Epitaxy

2016 ◽  
Vol 6 (1) ◽  
Author(s):  
Yong-Jin Cho ◽  
Alex Summerfield ◽  
Andrew Davies ◽  
Tin S. Cheng ◽  
Emily F. Smith ◽  
...  
Keyword(s):  
Atomic Force Microscopy ◽  
High Temperature ◽  
Molecular Beam Epitaxy ◽  
Boron Nitride ◽  
Photoelectron Spectroscopy ◽  
Molecular Beam ◽  
Hexagonal Boron Nitride ◽  
Graphite Substrate ◽  
Force Microscopy ◽  
Atomic Force

Abstract We demonstrate direct epitaxial growth of high-quality hexagonal boron nitride (hBN) layers on graphite using high-temperature plasma-assisted molecular beam epitaxy. Atomic force microscopy reveals mono- and few-layer island growth, while conducting atomic force microscopy shows that the grown hBN has a resistance which increases exponentially with the number of layers, and has electrical properties comparable to exfoliated hBN. X-ray photoelectron spectroscopy, Raman microscopy and spectroscopic ellipsometry measurements on hBN confirm the formation of sp2-bonded hBN and a band gap of 5.9 ± 0.1 eV with no chemical intermixing with graphite. We also observe hexagonal moiré patterns with a period of 15 nm, consistent with the alignment of the hBN lattice and the graphite substrate.

Molecular Beam Epitaxy of AlN Layers on Si (111)

2008 ◽  
Vol 1068 ◽  
Author(s):  
Jean-Christophe Moreno ◽  
Eric Frayssinet ◽  
Fabrice Semond ◽  
Jean Massies
Keyword(s):  
Molecular Beam Epitaxy ◽  
Acoustic Wave ◽  
Wave Speed ◽  
Molecular Beam ◽  
Bulk Acoustic Wave ◽  
X Ray Diffraction ◽  
High Crystalline Quality ◽  
Force Microscopy ◽  
Atomic Force ◽  
Film Bulk

ABSTRACTIn this work, we present a study of epitaxial Aluminium Nitride (AlN) for thin film bulk acoustic wave (BAW) applications. Molecular beam epitaxy (MBE) was used to perform high crystalline quality AlN thin films growth on different silicon substrate preparations. A morphological study was performed by atomic force microscopy (AFM) and scanning electron microscopy (SEM), while structural properties and acoustic wave speed were respectively assessed by X-ray diffraction and acoustic picoseconds.

Growth of Germanium on Porous Silicon (001)

1996 ◽  
Vol 452 ◽  
Author(s):  
W. H. Thompson ◽  
Z. Yamani ◽  
H. M. Nayfeh ◽  
M.-A. Hasan ◽  
J. E. Greene ◽  
...  
Keyword(s):  
Surface Roughness ◽  
Atomic Force Microscopy ◽  
Porous Silicon ◽  
Molecular Beam Epitaxy ◽  
Surface Morphology ◽  
Molecular Beam ◽  
Porous Si ◽  
Force Microscopy ◽  
Atomic Force ◽  
Nm Range

AbstractThe surface morphology of Ge grown on Si (001) and porous Si(001) by molecular beam epitaxy at 380 °C is examined using atomic force microscopy (AFM). For layer thicknesses of 30 nm, the surface shows islanding while still maintaining some of the underlying roughness of the surface of porous Si. For thicknesses in the 100 nm range, the surface roughness is not visible, but the islanding persists. Unlike the case of silicon where islands tend to merge and nearly disappear as the thickness of the deposited layer rises, we observe on the porous layer the persistence of the islands with no merging even for macroscopic thicknesses as large as 0.73 microns.

Epitaxial Growth and Characterization of the Ordered Vacancy Compound CuIn3Se5 on GaAs (100) Fabricated by Molecular Beam Epitaxy

1994 ◽  
Vol 340 ◽  
Author(s):  
Art J. Nelson ◽  
M. Bode ◽  
G. Horner ◽  
K. Sinha ◽  
John Moreland
Keyword(s):  
Molecular Beam Epitaxy ◽  
Epitaxial Growth ◽  
Molecular Beam ◽  
Structural Defects ◽  
X Ray Diffraction ◽  
Symmetric Vibration ◽  
Force Microscopy ◽  
Atomic Force ◽  
Transmission Electron

ABSTRACTEpitaxial growth of the ordered vacancy compound (OVC) CuIn3Se5 has been achieved on GaAs (100) by molecular beam epitaxy (MBE) from Cu2Se and In2Se3 sources. Electron probe microanalysis and X-ray diffraction have confirmed the composition for the 1-3-5 OVC phase and that the film is single crystal Culn3Se5 (100). Transmission electron microscopy (TEM) characterization of the material also showed it to be single crystalline. Structural defects in the layer consisted mainly of stacking faults. Photoluminescence (PL) measurements performed at 7.5 K indicate that the bandgap is 1.28 eV. Raman spectra reveal a strong polarized peak at 152 cm−1, which is believed to arise from the totally symmetric vibration of the Se atoms in the lattice. Atomic force microscopy reveals faceting in a preferred (100) orientation.

Sign in / Sign up

Export Citation Format

Share Document