Effects of Surface Modification of Mg(OH)2 with Polysiloxane Oil and Silica Additive on the Flame Retardancy and Mechanical Properties of LDPE-Mg(OH)2 Composites

2004 ◽  
Vol 847 ◽  
Author(s):  
K. Kodama ◽  
T. Hyodo ◽  
Y. Shimizu ◽  
M. Egashira
Keyword(s):  
Mechanical Properties ◽  
Surface Modification ◽  
Flame Retardancy ◽  
Fumed Silica ◽  
Flame Retardants ◽  
Oxygen Index ◽  
Low Density Polyethylene ◽  
Low Density ◽  
Co Addition ◽  
Silica Additive

ABSTRACTComposites of low density polyethylene (LDPE) and 40 wt% Mg(OH)2 modified with several kinds of polysiloxane oils were prepared in order to evaluate the effect of the surface modification of Mg(OH)2 on the mechanical properties and oxygen index of the composites. A composite containing Mg(OH)2 modified with methylhydrogen polysiloxane oil showed an oxygen index of 23.8% O2 and an elongation of 425%. These values were superior to other composites containing Mg(OH)2 modified with other kinds of polysiloxane oils. The oxygen index could be enhanced up to 24.8% by co-addition of 5 wt% fumed silica as another flame retardant to the composite of LDPE and 35 wt% Mg(OH)2 (modified with methylhydrogen polysiloxane oil), while fixing the total amount of the flame retardants at 40 wt%.

scholarly journals Flame Retardancy Properties and Physicochemical Characteristics of Polyurea-Based Coatings Containing Flame Retardants Based on Aluminum Hydroxide, Resorcinol Bis(Diphenyl Phosphate), and Tris Chloropropyl Phosphate

Materials ◽  
2021 ◽  
Vol 14 (18) ◽  
pp. 5168
Author(s):  
Wojciech Dukarski ◽  
Piotr Krzyżanowski ◽  
Marcin Gonsior ◽  
Iwona Rykowska
Keyword(s):  
Mechanical Properties ◽  
Aluminum Hydroxide ◽  
Flame Retardancy ◽  
Flame Retardants ◽  
Oxygen Index ◽  
Good Alternative ◽  
Physicochemical Characteristics ◽  
Limiting Oxygen Index ◽  
Diphenyl Phosphate ◽  
Further Development

Polyurea is a synthetic material made by the reaction of isocyanate and polymer blend-containing amines. Due to its outstanding mechanical properties and fast curing, polyurea-based coatings have found dozens of applications, including waterproofing and anti-corrosion coatings. Further development of this material can create a flame-retardant product, a good alternative for common products available on the market, such as intumescent coatings. To improve the flame retardancy of polyurea, several flame retardants were investigated. The influence of aluminum hydroxide, resorcinol bis(diphenyl phosphate) (RDP), and tris chloropropyl phosphate (TCPP) on flame retardancy and morphology was studied. The following methods were used: infrared spectroscopy, scanning electron microscopy, thermogravimetric analysis, limiting oxygen index, and tensile strength. The examinations mentioned above showed the improvement of flame-retardancy of polyurea for two products: chlorinated organophosphate and organophosphate. Nevertheless, using the chlorinated organophosphate additive caused a rapid deterioration of mechanical properties.

scholarly journals Low-Temperature Mechanical Properties of High-Density and Low-Density Polyethylene and Their Blends

Polymers ◽  
2021 ◽  
Vol 13 (11) ◽  
pp. 1821
Author(s):  
Ildar I. Salakhov ◽  
Nadim M. Shaidullin ◽  
Anatoly E. Chalykh ◽  
Mikhail A. Matsko ◽  
Alexey V. Shapagin ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Low Temperature ◽  
Impact Strength ◽  
Relative Elongation ◽  
High Density ◽  
Low Density Polyethylene ◽  
Low Density ◽  
Elongation At Break ◽  
Subzero Temperatures ◽  
Izod Impact

Low-temperature properties of high-density polyethylene (HDPE), low-density polyethylene (LDPE), linear low-density polyethylene (LLDPE), and their blends were studied. The analyzed low-temperature mechanical properties involve the deformation resistance and impact strength characteristics. HDPE is a bimodal ethylene/1-hexene copolymer; LDPE is a branched ethylene homopolymer containing short-chain branches of different length; LLDPE is a binary ethylene/1-butene copolymer and an ethylene/1-butene/1-hexene terpolymer. The samples of copolymers and their blends were studied by gel permeation chromatography (GPC), differential scanning calorimetry (DSC), 13С NMR spectroscopy, and dynamic mechanical analysis (DMA) using testing machines equipped with a cryochamber. It is proposed that such parameters as “relative elongation at break at −45 °C” and “Izod impact strength at −40 °C” are used instead of the ductile-to-brittle transition temperature to assess frost resistance properties because these parameters are more sensitive to deformation and impact at subzero temperatures for HDPE. LLDPE is shown to exhibit higher relative elongation at break at −45 °C and Izod impact strength at −20 ÷ 60 °C compared to those of LDPE. LLDPE terpolymer added to HDPE (at a content ≥ 25 wt.%) simultaneously increases flow properties and improves tensile properties of the blend at −45 °C. Changes in low-temperature properties as a function of molecular weight, MWD, crystallinity, and branch content were determined for HDPE, LLDPE, and their blends. The DMA data prove the resulting dependences. The reported findings allow one to understand and predict mechanical properties in the HDPE–LLDPE systems at subzero temperatures.

Physical and mechanical properties of linear low-density polyethylene/cycloolefin copolymer/layered silicate nanocomposite

2015 ◽  
Vol 37 (11) ◽  
pp. 3167-3174 ◽  
Author(s):  
S. Sánchez-Valdes ◽  
E. Ramírez-Vargas ◽  
L.F. Ramos de Valle ◽  
J.G. Martinez-Colunga ◽  
J. Romero-Garcia ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Layered Silicate ◽  
Physical And Mechanical Properties ◽  
Low Density Polyethylene ◽  
Low Density ◽  
Linear Low Density Polyethylene

Effect of fillers on mechanical properties of recycled low density polyethylene composites under weathered condition

2020 ◽  
Vol 15 (3) ◽  
pp. 44-49
Author(s):  
Ibiyemi A. Idowu ◽  
Olutosin O. Ilori
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Pure Water ◽  
Mechanical Tests ◽  
Filler Loading ◽  
Low Density Polyethylene ◽  
Low Density ◽  
Hardness Property ◽  
Recycled Low Density Polyethylene ◽  
Polyethylene Composites

The study examined the effect of fillers on the mechanical properties of the recycled low density polyethylene composites under weathered condition with a view of managing the generation and disposal of plastic wastes. Discarded pure water sachets and fillers (glass and talc) were sourced and recycled. Recycled low density polyethylene (RLDPE) and preparation of RLDPE/glass, RLDPE/talc and RLDPE/glass/talc composites were carried out using a furnace at compositions of 0 – 40% in steps of 10% by weight. The mixtures were poured into hand-laid mould. The samples produced were exposed to sunlight for eight (8) weeks and their mechanical properties were studied. The results of mechanical tests revealed that tensile strength decreased with increasing filler loading while impact strength and hardness property increased marginally and considerably with increasing filler loading for all the composites respectively. The study concluded that glass and talc were able to reinforce recycled low density polyethylene under weathered condition. Keywords: Recycled Low Density Polyethylene (RLDPE); Fillers; Glass, Talc; Weathering condition; Sunlight; and Mechanical properties; Tensile strength, Impact and hardness

Sign in / Sign up

Export Citation Format

Share Document