scholarly journals FLEXURAL STRENGTH OF HIGH PERFORMANCE CONCRETE USING GRANITE POWDER AS FINE AGGREGATE

2015 ◽  
Vol 04 (16) ◽  
pp. 43-46
Author(s):  
Raghavendra R .
Keyword(s):  
Flexural Strength ◽  
High Performance ◽  
High Performance Concrete ◽  
Fine Aggregate ◽  
Granite Powder

scholarly journals Influence of Percentage Replacement of Metakaolin on Different Concrete Types Exposed to Internal Sulphate Attack

2018 ◽  
Vol 7 (4.20) ◽  
pp. 514
Author(s):  
Hadeel K. Awad ◽  
Rawaa K. Aboud ◽  
Shatha D. Mohammed
Keyword(s):  
Tensile Strength ◽  
Flexural Strength ◽  
High Performance ◽  
High Performance Concrete ◽  
Splitting Tensile Strength ◽  
Fine Aggregate ◽  
Sulphate Attack ◽  
Concrete Properties ◽  
Reactive Powder ◽  
Positive Effect

This research presents an experimental investigation on the influence of metakaolin replacement percentage upon some properties of       different concrete types. Three types of concrete were adopted (self- compacted concrete, high performance concrete and reactive powder concrete) all of high sulphate (SO3) percentage from the fine aggregate weight, 0.75%.Three percentages of metakaolin replacement were selected to be studied (5, 7 and 10) %. Three types of concrete properties (compressive, flexural and splitting tensile strength) were adopted to achieve better understanding for the influence of adding metakaolin.. The output results indicated that the percentage of metakaolin had a different level of positive effect on the compressive strength for both including and excluding of internal sulphate attack. This effect reached at 28 days of curing to (11.86, 10.22 and 4.75) % in case of excluding sulphate attack and to (13.82, 11.47and 6.53) % in the other case for SCC, HPC and RPC respectively. It can be concluded that the effect of metakaolin in both SCC and HPC are more influence than in RPC. Splitting and flexural strength have showed a similar behavior, flexural strength increased by (15.38, 9.42 and 5,84) % at age of 28 days when the sulphate attack is excluded, while it was (14.02, 10.66 and 4.28)% in case of sulphate attack included for SCC,HPC and RPC respectively. The response of splitting tensile strength for both including and excluding of sulphate attack reached to (13.03, 12.95 and 9.17) % and (16.88, 10.33 and 6.74) % respectively for SCC, HPC and RPC.   

Study on early Mechanical Performance of High Performance Concrete with Low Clinker Influenced by Rubber Powder

2014 ◽  
Vol 584-586 ◽  
pp. 1738-1741
Author(s):  
Qing Hai Meng ◽  
Li Hua Lv ◽  
Xu Yan
Keyword(s):  
Compressive Strength ◽  
Flexural Strength ◽  
High Performance ◽  
Bending Strength ◽  
Mechanical Performance ◽  
High Performance Concrete ◽  
Fine Aggregate ◽  
Rubber Powder ◽  
Concrete Mechanical Properties ◽  
Strength And Ductility

Selecting rubber powders, which is divided into 80 mesh and 150 mesh, as the research object, to understand the influence of high performance of lower clinker concrete mechanical properties of rubber powder with different varieties and volume. Taking the compressive strength, flexural strength and ratio of flexural strength to compressive strength as an indicator, the thesis explores the influence of the high performance concrete with low clinker, which rubber powder are mixed into as fine aggregate, on the compressive strength bending strength and ductility.

Effect of Copper Slag as a Fine Aggregate on the Durability Characteristics of High-Performance Concrete (HPC) Containing Silica Fume

2020 ◽  
Vol 07 (02) ◽  
pp. 1-10
Author(s):  
Rizwan Ahmad Khan ◽  
Keyword(s):  
Silica Fume ◽  
High Performance ◽  
High Performance Concrete ◽  
Copper Slag ◽  
Chloride Penetration ◽  
Interfacial Transition Zone ◽  
Fine Aggregate ◽  
Fresh Properties ◽  
Fine Aggregates ◽  
Effect Of Copper

This paper investigates the fresh and durability properties of the high-performance concrete by replacing cement with 15% Silica fume and simultaneously replacing fine aggregates with 25%, 50%, 75% and 100% copper slag at w/b ratio of 0.23. Five mixes were analysed and compared with the standard concrete mix. Fresh properties show an increase in the slump with the increase in the quantity of copper slag to the mix. Sorptivity, chloride penetration, UPV and carbonation results were very encouraging at 50% copper slag replacement levels. Microstructure analysis of these mixes shows the emergence of C-S-H gel for nearly all mixes indicating densification of the interfacial transition zone of the concrete.

scholarly journals Abrasion Resistance of Ultra-High-Performance Concrete for Railway Sleepers

2021 ◽  
Author(s):  
Ariful Hasnat ◽  
Nader Ghafoori
Keyword(s):  
Prestressed Concrete ◽  
Abrasion Resistance ◽  
High Performance ◽  
High Performance Concrete ◽  
High Strength ◽  
Positive Influence ◽  
Cementitious Material ◽  
Partial Replacement ◽  
Fine Aggregate ◽  
Ultra High Performance Concrete

AbstractThis study aimed to determine the abrasion resistance of ultra-high-performance concretes (UHPCs) for railway sleepers. Test samples were made with different cementitious material combinations and varying steel fiber contents and shapes, using conventional fine aggregate. A total of 25 UHPCs and two high-strength concretes (HSCs) were selected to evaluate their depth of wear and bulk properties. The results of the coefficient of variation (CV), relative gain in abrasion, and abrasion index of the studied UHPCs were also obtained and discussed. Furthermore, a comparison was made on the resistance to wear of the selected UHPCs with those of the HSCs typically used for prestressed concrete sleepers. The outcomes of this study revealed that UHPCs displayed excellent resistance against abrasion, well above that of HSCs. Amongst the utilized cementitious material combinations, UHPCs made with silica fume as a partial replacement of cement performed best against abrasion, whereas mixtures containing fly ash showed the highest depth of wear. The addition of steel fibers had a more positive influence on the abrasion resistance than it did on compressive strength of the studied UHPCs.

scholarly journals Effect of Mineral Aggregates and Chemical Admixtures as Internal Curing Agents on the Mechanical Properties and Durability of High-Performance Concrete

Materials ◽  
2020 ◽  
Vol 13 (9) ◽  
pp. 2090 ◽  
Author(s):  
Francisco Javier Vázquez-Rodríguez ◽  
Nora Elizondo-Villareal ◽  
Luz Hypatia Verástegui ◽  
Ana Maria Arato Tovar ◽  
Jesus Fernando López-Perales ◽  
...  
Keyword(s):  
Compressive Strength ◽  
Fly Ash ◽  
High Performance ◽  
High Performance Concrete ◽  
Chloride Ions ◽  
Internal Curing ◽  
Fine Aggregate ◽  
Pumice Stone ◽  
Chemical Admixtures ◽  
Mineral Aggregates

In the present work, the effect of mineral aggregates (pumice stone and expanded clay aggregates) and chemical admixtures (superplasticizers and shrinkage reducing additives) as an alternative internal curing technique was investigated, to improve the properties of high-performance concrete. In the fresh and hardened state, concretes with partial replacements of Portland cement (CPC30R and OPC40C) by pulverized fly ash in combination with the addition of mineral aggregates and chemical admixtures were studied. The physical, mechanical, and durability properties in terms of slump, density, porosity, compressive strength, and permeability to chloride ions were respectively determined. The microstructural analysis was carried out by scanning electronic microscopy. The results highlight the effect of the addition of expanded clay aggregate on the internal curing of the concrete, which allowed developing the maximum compressive strength at 28 days (61 MPa). Meanwhile, the replacement of fine aggregate by 20% of pumice stone allowed developing the maximum compressive strength (52 MPa) in an OPC-based concrete at 180 days. The effectiveness of internal curing to develop higher strength is attributed to control in the porosity and a high water release at a later age. Finally, the lowest permeability value at 90 days (945 C) was found by the substitutions of fine aggregate by 20% of pumice stone saturated with shrinkage reducing admixture into pores and OPC40C by 15% of pulverized fly ash. It might be due to impeded diffusion of chloride ions into cement paste in the vicinity of pulverized fly ash, where the pozzolanic reaction has occurred. The proposed internal curing technology can be considered a real alternative to achieve the expected performance of a high-performance concrete since a concrete with a compressive strength range from 45 to 67 MPa, density range from 2130 to 2310 kg/m3, and exceptional durability (< 2000 C) was effectively developed.

Sign in / Sign up

Export Citation Format

Share Document