scholarly journals AVALIAÇÃO DE KIT DE IRRIGAÇÃO POR GOTEJAMENTO UTILIZANDO ÁGUA RESIDUÁRIA

Irriga ◽  
2017 ◽  
Vol 1 (1) ◽  
pp. 110-117
Author(s):  
Roberta Daniela Da Silva Santos ◽  
Regiane De Carvalho Bispo ◽  
Kevim Muniz Ventura ◽  
Marcello Henryque Costa de Souza ◽  
Mariana Alexandre de Lima Sales

AVALIAÇÃO DE KIT DE IRRIGAÇÃO POR GOTEJAMENTO UTILIZANDO ÁGUA RESIDUÁRIA  ROBERTA DANIELA DA SILVA SANTOS1; REGIANE DE CARVALHO BISPO1; KEVIM MUNIZ VENTURA1; MARCELLO HENRYQUE COSTA DE SOUZA1 E MARIANA ALEXANDRE DE LIMA SALES1 1Programa de Pós-Graduação em Irrigação e Drenagem, Universidade Estadual Paulista “Júlio de Mesquita Filho”- UNESP/FCA, Rua Dr. José Barbosa de Barros, 1780, Botucatu, SP, [email protected], [email protected], [email protected], [email protected], [email protected]  1 RESUMO A produtividade agrícola em sistemas irrigados está diretamente relacionada com a uniformidade de distribuição de água para as plantas. Avaliar periodicamente essa distribuição de água é fundamental, pois a irregularidade desse parâmetro, pode causar desperdícios de água e energia, além de prejudicar a rentabilidade da propriedade. Desta forma, o objetivo deste trabalho foi comparar a eficiência de aplicação de água do kit de gotejamento – Dripkit, novo e após 15 meses instalado em campo, operando com água residuária tratada. A avaliação foi realizada no Laboratório de Hidráulica do Departamento de Engenharia Rural da Faculdade de Ciências Agronômicas – FCA/UNESP, campus Botucatu-SP e foi conduzido conforme as recomendações da Norma ISO 9261:2004, utilizando água de abastecimento público, fornecida pela Companhia de Saneamento Básico do Estado de São Paulo (Sabesp). A avaliação foi realizada na bancada de ensaios para tubos gotejadores e foram calculados os coeficientes de uniformidade de Christiansen, de distribuição, de uniformidade estatístico e eficiência de aplicação. Na mangueira usada, os parâmetros CUC, CUD, CUE e EA, foram classificados como ruim, razoável, inaceitável e inaceitável, respectivamente.Palavras-chave: Irrigação localizada, uniformidade, distribuição, eficiência de aplicação.  SANTOS, R. D. S.; BISPO, R. de C.; VENTURA, K. M.; SOUZA, M. H. C.; SALES, M. A. L.EVALUATION OF A DRIPPING IRRIGATION KIT THAT USES WASTEWATER  2 ABSTRACT Agricultural productivity in irrigated systems is directly related to the uniformity of distribution of water to the plants. The periodical evaluation of this water distribution is fundamental, since an irregularity in this parameter may waste water and energy, as well as undermine the profitability of the property. In this way, the purpose of this work is to compare the water application efficiency of the drip kit – Dripkit after 15 months of use in the field, operating with treated wastewater. The test was carried out in the Hydraulic Laboratory of the Department of Rural Engineering of the Faculty of Agronomic Sciences - FCA / UNESP, Campus Botucatu-SP and was conducted in accordance with the ISO 9261: 2004 standards, using potable water. The evaluation was performed on a test bench for dripping irrigation and the uniformity, Christiansen, distribution and statistical coefficients were calculated. The CUC, CUD, CUE and EA parameters were classified as bad, regular, unacceptable and unacceptable, respectively. Keywords: Drip irrigation, uniformity, distribution, application efficiency.

2009 ◽  
Vol 44 (7) ◽  
pp. 730-737 ◽  
Author(s):  
Alisson Jadavi Pereira da Silva ◽  
Eugênio Ferreira Coelho ◽  
Jarbas Honorio de Miranda ◽  
Stephen Ray Workman

The objective of this work was to evaluate root and water distribution in irrigated banana (Musa sp.), in order to determine the water application efficiency for different drip irrigation emitter patterns. Three drip emitter patterns were studied: two 4-L h-1 emitters per plant (T1), four 4-L h-1 emitters per plant (T2), and five 4-L h-1 emitters per plant (T3). The emitters were placed in a lateral line. In the treatment T3, the emitters formed a continuous strip. The cultivated area used was planted with banana cultivar BRS Tropical, with a 3-m spacing between rows and a 2.5-m spacing between plants. Soil moisture and root length data were collected during the first production cycle at five radial distances and depths, in a 0.20x0.20 m vertical grid. The experiment was carried out in a sandy clay loam Xanthic Hapludox. Soil moisture data were collected every 10 min for a period of five days using TDR probes. Water application efficiency was of 83, 88 and 92% for the systems with two, four and five emitters per plant, respectively. It was verified that an increase in the number of emitters in the lateral line promoted better root distribution, higher water extraction, and less deep percolation losses.


Irriga ◽  
2009 ◽  
Vol 14 (1) ◽  
pp. 41-53 ◽  
Author(s):  
Giuliani Do Prado ◽  
Alberto Colombo

COMPOSIÇÃO DE PERFIS RADIAIS DE DISTRIBUIÇÃO DE ÁGUA DE ASPERSORES  Giuliani do Prado; Alberto ColomboDepartamento de Engenharia, Universidade Federal de Lavras, Lavras, MG, [email protected]  1 RESUMO Este trabalho descreve um procedimento de composição do perfil radial de aspersores que operam com dois bocais. Foram determinados na bancada de ensaios de aspersores da Universidade Federal de Lavras, em Lavras/MG, os valores de vazão e perfil radial do aspersor PLONA-RL250 operando, individualmente, com os bocais principais 14 e28 mme com os bocais auxiliares 5, 6 e7 mm, e operando, nas diferentes seis combinações de bocal auxiliar e principal do aspersor, sob cinco pressões de serviço (292, 392, 490, 588 e 696 kPa). No processo de composição do perfil radial realizado, ajustando a vazão dos bocais auxiliar e principal, operando individualmente, a vazão do aspersor operando com o conjunto de bocais auxiliar e principal, verificou-se um coeficiente de determinação médio de 88,57% entre as intensidades de precipitação adimensionais dos perfis radiais compostos com os perfis radiais do conjunto. Na relação linear, ajustada, entre os valores de uniformidade de equipamentos autopropelidos de irrigação, obtidos com os perfis radiais compostos e do conjunto, a inclinação da reta foi igual a 44°12’com um erro relativo médio de 2,34%. Estes resultados mostram que o procedimento de composição do perfil radial de aspersores não influencia, de maneira significativa, na uniformidade de aplicação de água de aspersores. UNITERMOS: bocais do aspersor, vazão do aspersor, uniformidade de irrigação.  PRADO, G. DO; COLOMBO, A. SPRINKLER WATER DISTRIBUTION COMPOSITIONS  2 ABSTRACT This paper described a procedure to compose a sprinkler pattern for a sprinkler that operates with two nozzles. To compose the pattern, discharge values and patterns of the PLONA-RL250 sprinkler were determined at the sprinkler test bench of the Universidade Federal de Lavras, in Lavras/MG. The tests were conducted with all possible combinations using 14mm and28 mmmain nozzles and the 5, 6 and7 mmauxiliary nozzles as well as with each nozzle functioning individually. Five working pressures (294, 392, 490, 588 and 686 kPa) were used for each nozzle configuration. In the pattern composition process, by adjusting the main and auxiliary nozzle discharges operating individually, and by adjusting  the sprinkler discharge operating with the corresponding pair of main and auxiliary nozzles, it was verified that the average determination coefficient was 88.57% between the dimensionless water application rate of the composed and pair patterns. In the adjusted linear relation, between the uniformity values of a travel irrigation machine obtained from the composed and pair patterns, the inclination was 44° 12' with an average relative error of 2.34%. These results show that the procedure to compose a sprinkler pattern for sprinklers does not influence significantly the water application uniformity of sprinklers. KEY WORDS: sprinkler nozzles, sprinkler flow rate, irrigation uniformity


Author(s):  
Xin Hui ◽  
Haijun Yan ◽  
Lin Zhang ◽  
Junying Chen

Abstract To improve the water application uniformity for sprinkler irrigation on sloping land, indoor tests were conducted on an artificial slope (slopes of 0, 0.05, 0.10 and 0.15) to evaluate the effects of two riser orientations, vertical (VO) and perpendicular (PO) to the slope, on the uniformity of sprinkler rotation, radius of throw, water distribution of an individual sprinkler and the overlapped water application uniformity (WAU). Compared with the VO, the PO could effectively improve the water distribution on sloping land and minimize the risk of soil erosion. Additionally, the PO was superior in the WAU, and a rectangular arrangement could dramatically enhance the WAU at smaller sprinkler spacing, while larger acceptable sprinkler spacing was accepted in a triangular arrangement. The riser orientation and sprinkler spacing had the most significant effect on the WAU, followed by the slope and sprinkler arrangement, suggesting that the adjustment of riser orientation or sprinkler spacing was helpful in improving the WAU. However, from the aspects of investment cost and installation convenience for irrigation projects, the method of PO was recommended. Therefore, when designing the sprinkler irrigation systems on the slope, choosing PO is the simplest and most effective way to achieve good irrigation uniformity.


Irriga ◽  
2017 ◽  
Vol 1 (1) ◽  
pp. 57-63
Author(s):  
Kevim Muniz Ventura ◽  
Regiane De Carvalho Bispo ◽  
ROBERTA DANIELA DA SILVA SANTOS ◽  
MARCELLO HENRYQUE COSTA DE SOUZA ◽  
RODRIGO MÁXIMO SÁNCHEZ ROMÁN

ANÁLISE DA UNIFORMIDADE DE APLICAÇÃO EM DIFERENTES SISTEMAS DE CULTIVO COM IRRIGAÇÃO LOCALIZADA   KEVIM MUNIZ VENTURA1; REGIANE DE CARVALHO BISPO1; ROBERTA DANIELA DA SILVA SANTOS1; MARCELLO HENRYQUE COSTA DE SOUZA1 E RODRIGO MÁXIMO SÁNCHEZ ROMÁN2   1Programa de Pós-Graduação em Irrigação e Drenagem, Universidade Estadual Paulista “Julio de Mesquita Filho” - UNESP/FCA, Rua José Barbosa de Barros, 1780, Botucatu, SP, [email protected], [email protected], [email protected], [email protected]. 2Professor assistente, Departamento de Engenharia Rural, FCA/UNESP. Botucatu, SP, [email protected] *Extraído da dissertação de mestrado do primeiro autor.     1 RESUMO   A crescente necessidade de elevar a produção em menos espaço guia as pesquisas agropecuárias visando criar tecnologias que busquem atender essa demanda. A possibilidade de produzir hortaliças de forma alternativa é algo que desperta atenção nos agricultores familiares e moradores de áreas urbanas que desejam produzir o próprio alimento. A irrigação é uma das práticas de maior importância para o sucesso de uma horta, seja ela convencional ou vertical, por isso é de suma importância que sistemas de irrigação apresentem uma boa uniformidade de aplicação de água. Desta forma, avaliar o sistema é uma etapa primordial para garantir o adequado manejo da irrigação. O objetivo deste trabalho foi avaliar os coeficientes de uniformidade (Christiansen, de distribuição, estatístico e eficiência de aplicação) em uma fita gotejadora após 2 ciclos, em dois sistemas de cultivo (convencional e vertical). Com os resultados obtidos, foi possível observar que a fita utilizada no sistema vertical obteve coeficientes de uniformidade superiores com o passar dos ciclos, garantindo que a aplicação de água neste sistema fosse mais satisfatória que o sistema convencional.   Palavras-chave: Sistema vertical, gotejamento, coeficiente de uniformidade     VENTURA, K. M.; BISPO, R. DE C.; SANTOS, R. D. S.; SOUZA, M. H. C.; SÁNCHEZ-ROMÁN, R. M. ANALYSIS OF APPLICATION UNIFORMITY IN DIFFERENT LOCALIZED IRRIGATION SYSTEMS     2 ABSTRACT   The growing need to leverage production in less space drives the agricultural research, making it to create technologies that seek to meet this demand. The possibility of producing vegetables in an alternative way is something that draws the attention of family of farmers and urban dwellers who wish to produce their own food. Irrigation is one of the most important practices for the success of a conventional or vertical garden, so it is critical that irrigation systems have an excellent uniformity in the water application. Thus, to evaluate the system is a primordial stage to guarantee the adequate irrigation management. This work aims to evaluate the uniformity coefficients (Christiansen, distribution and statistical coefficients) in a drip tape after 2 cycles, in two cropping systems (traditional and vertical). With the results obtained, it was possible to observe that the drip tape used in the vertical system got higher uniformity coefficients than the conventional one, ensuring that the application of water in this system was more satisfactory.   Keywords: Vertical system, drip irrigation, uniformity coefficient


Irriga ◽  
2017 ◽  
Vol 22 (4) ◽  
pp. 821-831
Author(s):  
Cristian Epifânio Toledo ◽  
Cláudio Márcio Pereira de Souza ◽  
Paulo Emilio Pereira de Albuquerque

EFICIÊNCIA da APLICAÇÃO DA ÁGUA por PIVô CENTRAL EM DIFERENTES REGIÕES DE MINAS GERAIS.     CRISTIAN EPIFÂNIO TOLEDO1; PAULO EMILIO PEREIRA DE ALBUQUERQUE2 E CLÁUDIO MÁRCIO PEREIRA DE SOUZA3   1Departamento de Agronomia, UEG – Universidade Estadual de Goiás, Campus Palmeira de Goiás, Go. Rua 7, s/n, CEP  76.190-000. Email: [email protected] 2Departamento de Núcleos Temáticos, EMBRAPA – Empresa Brasileira de Pesquisa Agropecuária, Sete Lagoas, MG. Email: [email protected] 3Departamento de Agronomia, UFVJM – Universidade Federal dos Vales Jequitinhonha e Mucuri, Campus Diamantina, MG. Email: [email protected]     1 RESUMO   A prática da irrigação garante o suprimento da água onde há demanda, sendo imprescindível o uso eficiente desse recurso. Objetivou-se avaliar o desempenho de sistemas de pivôs centrais de propriedades rurais em diferentes regiões de Minas Gerais (MG). Foram realizados testes de campo para determinação dos coeficientes de uniformidade de distribuição de água, permitindo assim avaliar as eficiências dos pivôs centrais. Os parâmetros estudados foram: uniformidade de aplicação de água (CUC e CUD), eficiência de irrigação e percentagem de área adequadamente irrigada. Os pivôs centrais testados apresentaram em geral, níveis aceitáveis de uniformidade de aplicação de água. Os CUCs e CUDs em 82% dos sistemas avaliados apresentaram valores acima de 80% e 70%, respectivamente. A eficiência de aplicação de água também apresentou valores dentro do admissível e do normal, obtendo-se uma média de 91%, também caracterizando uma boa eficiência de aplicação de água. A percentagem de área adequadamente irrigada apresentou uma média de 49%, considerada regular. Assim, pode-se caracterizar os sistemas avaliados como de bom funcionamento.   Palavras-chave: Pivô central; uniformidade de irrigação; coeficiente de uniformidade     TOLEDO, C. E.; ALBUQUERQUE, P, E. P.; SOUZA, C. M. P. EFFICIENCY OF WATER APPLICATION BY A CENTRAL PIVOT IN DIFFERENT REGIONS OF MINAS GERAIS     2 ABSTRACT   The practice of irrigation guarantees water supply where there is demand, and the efficient use of this resource is essential. The objective of this study was to evaluate the performance of central pivot systems of rural properties in different regions of Minas Gerais (MG). Field tests were performed to determine the coefficients of water distribution, thus allowing the evaluation of the efficiency of the central pivots. The parameters studied were: uniformity of water application (CUC and CUD), irrigation efficiency, and percentage of adequately irrigated area. The central pivots tested showed, in general, acceptable levels of water application uniformity. The CUCs and CUDs are 82% of the environmental systems presented values above 80% and 70%, respectively. The efficiency of water application also presented values within the allowable and normal limits, obtaining an average of 91%, also characterizing a good efficiency of water application. A percentage of adequately irrigated area reached an average of 49%, being considered regular. Thus, control systems can be characterized as being functional systems.   Keywords: Central pivot; irrigation uniformity; uniformity coefficient  


2019 ◽  
Vol 221 ◽  
pp. 84-91 ◽  
Author(s):  
Abid Sarwar ◽  
R. Troy Peters ◽  
Hani Mehanna ◽  
Mohamma Zaman Amini ◽  
Abdelmoneim Zakaria Mohamed

Sign in / Sign up

Export Citation Format

Share Document