scholarly journals Morpho-physiological Traits and Mineral Composition on Local Maize Population Growing in Agro Ecological Conditions in Kosova

2013 ◽  
Vol 5 (2) ◽  
pp. 232-237
Author(s):  
Sali ALIU ◽  
Imer RUSINOVCI ◽  
Shukri FETAHU ◽  
Kemajl BISILIMI
Keyword(s):  
Block Design ◽  
Physiological Traits ◽  
Cellulose Content ◽  
Maize Breeding ◽  
Maize Population ◽  
Maize Populations ◽  
Randomized Complete Block Design ◽  
Morphological And Physiological Traits ◽  
The Mean ◽  
Field And Laboratory Conditions

Twelve local maize populations were evaluated at the experimental farm, University of Prishtina, Kosovo. The study was conducted to assess the magnitude of genetic variation in local maize populations for different morphological-physiological and chemical composition under field and laboratory conditions. Randomized complete block design (RCBD) with three replications was used for laying out the experiment. The results showed that there were significant differences for most morphological and physiological traits under study. The mean grain yield of all populations was 102.96 g plant-1. The protein and oil contents ranged between 11.53 to 9.43% and 4.23 to 4.87% respectively. The cellulose content varied from 6.03 to 6.37%. There were also big differences regarding phenotypic correlations. The present study revealed considerable amount of diversity among the local maize populations which could be manipulated for further improvement in maize breeding.

scholarly journals Effect of Seeding Rate On Growth And Yield Of Okra (Abelmoschus Esculantus) In Zuru Northern Guinea Savanna Of Nigeria

2018 ◽  
Vol 6 (02) ◽  
Author(s):  
Yohanna J, A. ◽  
Muhammad A, M.
Keyword(s):  
Block Design ◽  
Total Yield ◽  
Growth And Yield ◽  
Land Resource ◽  
Seeding Rate ◽  
Randomized Complete Block Design ◽  
Number Of Leaves ◽  
Resource Space ◽  
Plant Stand ◽  
The Mean

Field experiment was carried out during 2010 rainy season to find the effect of seeding rate on the growth and yield of okra (Abelmuschus esculentus) in Zuru Northern Guinea Savannah. Zuru is located in Zuru Local government area of Kebbi State (Latitude 11o 251 to 11o 551 North and Longitude 4o 51 to 5o 251 East of the equator). The experiment consisted of three treatments that is planting okra at one plant per stand (S1), two plants per stand (S2) and three plants per stand (S3). The experiment was laid out in randomized complete block design (RCBD) and the treatments replicated three time. The result of the experiment has shown that plant height and number of leaves/plant at 3, 6 and 9 weeks after planting (    WAP) were significantly influenced by seeding rate (P<0.05). At 3, 6 and 9 WAP tallest plants were obtained from okra plants planted at three plants/stand (27.83, 54.0 and 77.0cm) respectively followed by okra planted at two plant/stand (24.77, 50.67 and 74.33 leave/plant respectively ). However, more number of leaves/plant were obtained from okra plant at one plant/stand (9.67, 24.67 and 48.0 leaves/plant respectively) followed by okra planted at two plants/stand (8.33, 18.33 and 36.33 leaves/plant respectively). Seeding rate had significant influence on time of 50 percent flowering with one plant/stand first attaining 50 percent flowering stage just within 36.33 days followed by okra planted at two plants/stand (38 days). The mean fresh fruit yield of okra was also significantly influenced by seeding rate with the highest yield of fresh fruits obtained from three plants/stand (83.34/ha) followed by okra planted at two plants/stand (55.56/ha). However, the result of the findings recommends that, okra should be planted at two plants/stand for medium sized and marketable okra fresh fruits since at three plants/stand leads to the production of undersized fresh fruits which do not often attract customers. At one plant/stand, there seemed to be early fruiting and bigger sized fresh fruits but low total yield due to underutilization of land resource/space. Planting at one plant/stand should therefore be avoided

scholarly journals Growth Performance of Lettuce Using Fermented Products as Organic Fertilizers

2019 ◽  
Vol 1 (3) ◽  
pp. 65
Author(s):  
Kareen Lynn E. Negado
Keyword(s):  
Growth Performance ◽  
Block Design ◽  
Organic Fertilizers ◽  
Control Groups ◽  
Lettuce Seeds ◽  
Randomized Complete Block Design ◽  
Number Of Leaves ◽  
The Mean ◽  
And Control ◽  
Fermented Products

This study evaluates the growth performance of lettuce (Lactuca sativa L.) utilizing various fermented products as organic fertilizers. Growth performance is determined through the plant’s weight and leaves and significant differences in growth among various treatments: (a) fish trash, (b) scrap seaweeds, (c) kangkong, and control groups urea (positive) and water (negative) was also determined. Kangkong leaves are fermented for 10 days, fish trash for 14 days and 1 month for seaweeds. Lettuce seeds are sown before transplanting (15 days after germination) into pots and placed in raised beds. Randomized complete block design is utilized in the experiment. Growth performance is measured through the number of leaves 10, 20, and 30 days after transplant and mass of plant upon harvest. After 30 days, the lettuce was harvested. Based on the findings, the soil and fermented products are acidic and the needed organic matter for optimum growth of lettuce are not sufficient as well as some nutrients of the fermented products. Among the organic fertilizers, kangkong at 30 ml performs best in terms of the growth performance of lettuce. Urea performs best in terms of the mass upon harvest. Significant differences exist in the mean number of leaves of lettuce treated with various amounts of organic fertilizers with the plants that receive urea. Lettuce produce more number of leaves and with the highest mass upon harvest when treated with urea compared with organic fertilizers applied after 30 days from transplant. Keywords: fermented kangkong; fish trash; growth performance; lettuce; scrap seaweeds

scholarly journals Selección temprana de líneas S1 de maíz ricas en lisina: I probadores.

2016 ◽  
Vol 9 (2) ◽  
pp. 65
Author(s):  
María Cristina Vega ◽  
Enrique Navarro ◽  
José Espinoza ◽  
Gustavo A. Buciaga ◽  
José Luis Guerrero
Keyword(s):  
Grain Yield ◽  
Block Design ◽  
Agronomic Performance ◽  
Lysine Content ◽  
Fusarium Spp ◽  
Maize Breeding ◽  
High Lysine ◽  
Genetic Base ◽  
Randomized Complete Block Design ◽  
Normal Performance

This research involved ninety-six S1 maize lines with the opaque-2 gene that carne from populations 63 (26 lines), 65 (12 lines), and 68 (58 lines) from the CIMMYT maize breeding programo The S1 lines selected in the laboratory because of their high lysine content were crossed with five testers that had a different genetic base: a synthetic variety, two early lines derived from this variety, and two single intermediate crosses of normal performance. The test crosses were evaluated and compared with five control s (two commercial and three experimental hybrids) using a randomized complete block design in two sites in Mexico during 1992. The objecti ves of this research were to select SI lines in early generations according to their agronomic performance, grain lysine content, and GCA grain yield, and to compare testers' efficiency in discriminating S1 lines. On average, the SI lines of population 63 showed a greater grain yield as compared to that of populations 65 and 68 combined with all testers, except in the case of the synthetic tester YS- 201-M. A line from population 65 combined with tester B3 x B5 showed the highest grain yield (10,23 t ha-I), representing a superiority of 4% above the best commercial hybrid, AN- 447. A total ofthirty-one Sllines were selected based on their agronomic attributes and grain yield: 13, 14, and 4 from populations 63, 65 and 68 respectively]. Tester B3 x B5 tumed out to be the best line discriminator according to the following criteria: grain yield, percentage of ears damaged by Fusarium spp., and number of rotten ears.

ARRANJO POPULACIONAL PARA A VARIEDADE UENF-14 DE MILHO PIPOCA

2017 ◽  
Vol 16 (3) ◽  
pp. 401
Author(s):  
CÁSSIO VITORAZZI ◽  
ANTONIO TEIXEIRA AMARAL JÚNIOR ◽  
LILIAM SILVIA CANDIDO ◽  
ISMAEL LOURENÇO DE JESUS FREITAS ◽  
THIAGO RODRIGUES DA CONCEIÇÃO SILVA
Keyword(s):  
Zea Mays ◽  
Grain Yield ◽  
Rio De Janeiro ◽  
Zea Mays L ◽  
Block Design ◽  
Grain Production ◽  
Maize Population ◽  
The North ◽  
Randomized Complete Block Design ◽  
Janeiro State

 RESUMO - A adequação do arranjo populacional está entre as técnicas que podem maximizar a produtividade da cultura do milho. Daí a importância das pesquisas que buscam estudar o desempenho de cultivares de milho e milhos especiais, a fim de determinar o arranjo de plantas ideal. O objetivo deste trabalho foi avaliar o desempenho da variedade UENF-14, de milho pipoca, cultivada em diferentes arranjos populacionais, na safra e safrinha, para otimizar a recomendação fitotécnica para os produtores rurais do Norte Fluminense. Foram instalados dois experimentos em Campos dos Goytacazes-RJ. Um na safrinha 2011 utilizando a variedade UENF-14 e o híbrido experimental P2 x P9, e o outro na safra 2011-2012, com a variedade UENF-14 e o híbrido comercial IAC-112. O delineamento experimental, nos dois experimentos, foi o de blocos casualizados arranjados em parcelas subsubdivididas, em que as parcelas foram compostas pelos genótipos, as subparcelas constituídas pelos espaçamentos entre linhas de semeadura (0,45, 0,60 e 0,90 m) e as subsubparcelas compostas pelas densidades de plantas (60.000, 75.000 e 90.000 plantas ha-1). A UENF-14 apresentou desempenho superior aos híbridos, demonstrando seu potencial para cultivo na região Norte Fluminense. Houve aumento do rendimento de grãos com a diminuição do espaçamento entre linhas de plantio. Para a variedade UENF-14, a redução do espaçamento entre linhas de plantio foi vantajosa para a produção de grãos, independentemente da época de semeadura.Palavras-chave: Zea mays L., densidade de semeadura, espaçamento entre linhas, épocas de semeadura.  POPULATION ARRANGEMENT FOR THE VARIETY OF POPCORN UENF-14 ABSTRACT - The adequacy of the maize population arrangement is among the most important techniques for obtaining higher yields. Therefore, many researchers have been conducting an attempt to study the performance of corn and specialty corn. The objective was to evaluate the performance of the popcorn variety UENF-14 in different population arrangements, in the harvest season and off-season. Two experiments were carried out in Campos dos Goytacazes, North of Rio de Janeiro State, Brazil, in the off-season 2011, using the UENF-14 variety and the experimental hybrid P2 x P9, and in the season 2011-2012 using UENF-14 and the commercial hybrid IAC-112. The treatments were arranged in randomized complete block design with split plots, in which plots were composed by popcorn genotypes, the subplots consisting of three spacings between sowing lines (0.45, 0.60 and 0.90 m) and the subsubplots composed of three plants per hectare densities (60,000, 75,000 and 90,000 plants.ha-1). The variety UENF-14 presented higher performance than the hybrids, demonstrating its potential for recommendation to the North of Rio de Janeiro State. There was an increase of grain yield by reducing the spacing between the plants rows. The cultivation of the variety UENF-14 reducing the spacing between rows was advantageous for grain production, regardless of planting date.Keywords: Zea mays L., densities of plants, spacing between rows, sowing times.

scholarly journals Estimates of Heritability and Genetic Advance for Yield Components of Cowpea (Vigna unguiculata L. Walp) under Drought Stress Conditions

2021 ◽  
Vol 3 (3) ◽  
pp. 10-17
Author(s):  
A. Sheidu ◽  
T. M. Igyuve ◽  
A. E. Ochigbo
Keyword(s):  
Grain Yield ◽  
Block Design ◽  
Flowering Plant ◽  
Genetic Advance ◽  
Narrow Sense ◽  
Narrow Sense Heritability ◽  
Randomized Complete Block Design ◽  
The Mean ◽  
Parental Mating ◽  
Pod Number

The study was conducted at the Teaching and Research Farms, Federal University of Agriculture, Makurdi, Nigeria. Five Cowpea genotypes (FUAMPEA-1, IT99K-573-1-1, SAMPEA-16, SAMPEA-8, BIU LOCAL) were crossed and advanced to F1, F2, BC1 and BC2 populations using bi-parental mating design. The six generations were evaluated in a Randomized Complete Block Design with three replications. Significant test of the mean performances among the entries showed significant differences among the generations for the characters studied. Wide ranges of narrow sense heritability (18 to 79%), broad sense heritability (21 to 92%) and genetic advance (5.7 to 24.1%) were obtained for characters studied. Broad and narrow sense heritability as well as genetic advance was moderate to high for most of the characters studied such as days to 50% flowering, plant height, days to pod maturity, number of seeds per pod, number of pods per plant, hundred seed weight, root length and grain yield for the three sets of cowpea crosses. The results also revealed the possibility of exploitation for grain yield and drought tolerance in the crosses studied.

scholarly journals Evaluation of Chickpea (Cicer arietinum L.) Genotypes for Yield and Drought Tolerance under Rain Fed and Irrigated Conditions

2020 ◽  
pp. 33-42
Author(s):  
R. Divya Madhuri ◽  
V. Jayalakshmi ◽  
M. Shanthi Priya
Keyword(s):  
Andhra Pradesh ◽  
Yield Loss ◽  
Agricultural Research ◽  
Block Design ◽  
High Yield ◽  
Research Station ◽  
Drought Tolerant ◽  
Major Constraint ◽  
Randomized Complete Block Design ◽  
The Mean

In Southern India, drought stress is a major constraint to chickpea production and yield stability. Drought tolerant index (DTI) that provides a measure of drought based on yield loss under drought condition in comparison to normal condition was used for screening drought-tolerant genotypes. This study was conducted to determine drought tolerant genotypes with high yield in stress and non-stress conditions utilising physiological traits. Thirty chickpea genotypes were tested in a randomized complete block design with three replications under rain fed and irrigated conditions at Regional Agricultural Research Station, Nandyal, Andhra Pradesh, India during rabi, 2018-2019. The analysis of variance carried out for yield and drought tolerant traits revealed highly significant differences among the genotypes for all characters under rain fed as well as irrigated conditions. NBeG 776, NBeG 779, NBeG 868, ICCV 181606, MH 13 and MH 14 are drought tolerant. NBeG 776, NBeG 779 and NBeG 868 are suitable under both rain fed and irrigated conditions with significantly higher yields over their respective means. ICCV 181606, MH 13 and MH 14 are suitable exclusively for rain fed condition with significantly superior yields over the mean.

scholarly journals Investigation of rice quality milling in abrasive and blade whiteners in terms of breakage percentage and degree of milling

2018 ◽  
Vol 7 (10) ◽  
pp. 198-211
Author(s):  
Mohsen Heidarisoltanabadi ◽  
Hamidreza Salemi ◽  
Behshad Tahani ◽  
Sasan Fathi
Keyword(s):  
Power Consumption ◽  
Block Design ◽  
Rice Cultivars ◽  
Working Capacity ◽  
Moisture Contents ◽  
Randomized Complete Block Design ◽  
Breakage Rate ◽  
Degree Of Milling ◽  
Blade System ◽  
The Mean

Reduction of rice losses is very important. In this study, appropriate moisture contents for milling of three common rice cultivars were determined in abrasive and blade whiteners. To this end, a factorial test based on a randomized complete block design with three replications was carried out in two milling systems: abrasive and blade whiteners, on three paddy cultivars: Sorkheh, Sazandegi, and Tarom and at four moisture contents: 8, 10, 12 and 14% (on wet basis). The paddy cultivars were dried and converted into white rice in abrasive and blade systems. In each treatment, the rice-breakage percentage, the DOM, the working capacity and the power consumption of each system were measured. The results showed that cultivar Sorkheh had the lowest rice-breakage rate. In addition, the mean breakage rate and DOM were significantly lower in the abrasive whitener than in the blade whitener. Based on results, most appropriate milling moisture contents for the cultivars Sorkheh, Sazandegi, and Tarom were 10, 12, and 10%, respectively, in the abrasive system, and 10, 12, and 12%, respectively, in the blade system. The working capacity and power consumption in the abrasive system were 1.7 and 3.43 times as much as those in the blade system, respectively.

scholarly journals Study of Combining Ability and Nature of Gene Action for Yield and Yield Related Traits in Maize (Zea mays L.)

2019 ◽  
pp. 1-8
Author(s):  
Birender Singh ◽  
Abhinav Abhishek ◽  
R. B. P. Nirala ◽  
S. S. Mandal ◽  
Tushar Ranjan
Keyword(s):  
Grain Yield ◽  
Zea Mays L ◽  
Gene Action ◽  
Block Design ◽  
Diallel Mating Design ◽  
Randomized Complete Block Design ◽  
Additive Gene ◽  
Ear Height ◽  
The Mean ◽  
Half Diallel

The present investigation was carried out using thirty eight genotypes (eight parents, twenty eight F1's and two checks) using Griffing's half diallel mating design. The experiment was laid out in a randomized complete block design with three replications during kharif 2017 at the research farm of Bihar Agriculture College, Sabour. Observations were recorded for six pre-harvest characters viz days to 50% anthesis, days to 50% silking, anthesis silking interval, days to 75% brown husk, plant height, ear height and seven post-harvest characters viz cob length, cob diameter, number of kernel rows per cob, number of kernels per row, 1000 seed weight, shelling percentage and grain yield at 15% moisture. The mean sum of square of treatments was found to be significant for days to 75% brown husk and shelling per cent and highly significant for all other characters. The mean sum of square for GCA was found to be significant for cob length, no. of kernel row per cob, no. of kernels per row and highly significant for remaining all the characters except days to 75% brown husk and shelling%. The mean sum of square for SCA was significant for days to 75% brown husk and highly significant for all the remaining characters. On the basis of GCA effect for grain yield at 15% moisture, the parents BML-7, VQL-1 and SML-1 were found to be good general combiners. The ratio of GCA variance to SCA variance was found to be less than 1 for all the traits which indicated the preponderance of non-additive gene action. On the basis of SCA effects better performing crosses for grain yield at 15% moisture were DTPYC-9 × LM-13, CLQRCY-44 × VQL-1, CML-161 × SML-1 and CML-161× BML-7.

scholarly journals Evaluation of Potato Genotypes for Plant and YieldCharactersin Field at Dailekh

2021 ◽  
Vol 19 (2) ◽  
pp. 16-24
Author(s):  
Binod Prasad Luitel ◽  
Bishnu Bahadur Bhandari ◽  
Bihani Thapa
Keyword(s):  
Tuber Yield ◽  
Block Design ◽  
Research Station ◽  
Spring Season ◽  
Marketable Yield ◽  
Significant Difference ◽  
Randomized Complete Block Design ◽  
The Mean ◽  
On Farm ◽  
Eye Depth

A field experiment was conducted at Horticulture Research Station (HRS), Dailekh, in Mid-Western hills of Nepal during 2019 and 2020, to evaluate the performance of ten potato genotypes for plant, and tuber yield characters. The potato genotypes were evaluated during spring season in a randomized complete block design with three replications. The genotypes showed highly significant difference for all the traits except tuber emergence. The mean squares for the year were also significant for all the traits except tuber emergence, stem numberplant -1 and total tuber yield. The interaction between genotypes and years did not show significant differences in all the traits except stem numberplant -1. Genotype CIP392797.22 produced more marketable yield (27.5 tha -1) and total tuber yield (30.2tha -1) than all other genotypes. The genotype CIP392797.22 is characterized as medium maturing, oval-shaped and dark red-skinned one with shallow eye depth in the tuber, and it imparted 13.2% higher marketable yield than Kufri Jyoti (24.3 tha -1). Thus, the genotype CIP392797.22 is recommended to evaluate on-farm for the verification and up-scaling among farmers at Mid-Western Nepal.

scholarly journals Potential of twenty exotic germplasms to improve Brazilian maize architecture

1997 ◽  
Vol 20 (4) ◽  
pp. 691-969 ◽  
Author(s):  
Amadeu Regitano Neto ◽  
Luciano Lourenço Nass ◽  
José Branco de Miranda Filho
Keyword(s):  
Block Design ◽  
Correlation Coefficients ◽  
Phenotypic Correlation ◽  
Maize Breeding ◽  
Branch Number ◽  
Population Means ◽  
Local Populations ◽  
Randomized Complete Block Design ◽  
Tassel Branch Number ◽  
Ear Height

Temperate and temperate x tropical germplasms were introduced into the maize breeding of the Department of Genetics (ESALQ-USP). Twenty populations designated as P-1 to P-20 and a check population were evaluated in a randomized complete block design with two replications at Piracicaba, SP, Brazil. Plots were 2.0 m long, spaced 1.0 m apart, with 10 plants per plot after thinning. The following traits were evaluated: PH, plant height; EH, ear height; TB, tassel branch number; KW, 100 kernels weight; EL, ear length; ED, ear diameter; KR, kernels per row, and RN, number of rows of kernels. The means of the exotic populations showed a variation in performance for all traits. The population means were greater than check means for KW, EL, and KR. Populations P-9, P-10, P-12, and P-13 showed low relative ear placement values (EH/PH index), indicating that these materials could contribute to lower ear placement in local populations. P-1 and P-9 showed a high potential to reduce TB. The phenotypic correlation coefficients among populations were positive for most combinations, except for RN with PH, EH, TB, and KW. Predictions of 19 composite means were obtained for all traits.

Sign in / Sign up

Export Citation Format

Share Document