scholarly journals Feldspathic and Lithium Disilicate Onlays with a 2-Year Follow-Up: Split-Mouth Randomized Clinical Trial

2021 ◽  
Vol 32 (2) ◽  
pp. 53-63
Author(s):  
Guilherme de Siqueira Ferreira Anzaloni Saavedra ◽  
João Paulo Mendes Tribst ◽  
Nathália de Carvalho Ramos ◽  
Renata Marques de Melo ◽  
Vinícius Anéas Rodrigues ◽  
...  
Keyword(s):  
Clinical Performance ◽  
Glass Ceramics ◽  
Lithium Disilicate ◽  
Ceramic Materials ◽  
Significant Difference ◽  
Term Trial ◽  
Cad Cam ◽  
Age Range ◽  
Postoperative Sensitivity

Abstract The present study was a prospective, controlled, randomized, clinical short-term trial aiming to evaluate the clinical performance of adhesively luted, lithium disilicate and feldspathic glass-ceramics onlays over a period up to 2 years. A total of 11 patients (7 female, 4 male; age range: 18-60 years, mean age: 39 years) were selected for this study. Each patient received a maximum of two restorations per group in a split-mouth-design. LD: Eleven onlays, performed with lithium disilicate-based ceramic (IPS e.max CAD, Ivoclar Vivadent, Schaan, Liechtenstein), and FP: Eleven onlays, performed with feldspathic ceramic (Vita Mark II, Vita Zanhfabrik, Bad Säckingen). Recalls were performed at 2 weeks (baseline = R1), 1 year (R2) and 2 years (R3) after the cementation by three calibrated blinded independent investigators using mirrors, magnifying eyeglasses, probes and bitewing radiographs. The postoperative sensitivity, secondary caries, marginal integrity, marginal discoloration, color match, surface roughness, tooth integrity, and restoration integrity were evaluated. The Friedman test was used to determine if there was a statistically significant difference in time-to-time comparison of the parameters in the ceramics restorations. A total of 95.4% of the restorations were clinically acceptable at the 2-year recall, without a difference for any evaluation parameter for both ceramic materials. Based on the 2-year data, the CAD-CAM onlays manufactured with feldspathic and lithium-disilicate based ceramics showed similar clinical performance.

scholarly journals Effect of Thermocycling, Surface Treatments and Microstructure on the Optical Properties and Roughness of CAD-CAM and Heat-Pressed Glass Ceramics

Materials ◽  
2020 ◽  
Vol 13 (2) ◽  
pp. 381 ◽  
Author(s):  
Roxana-Diana Vasiliu ◽  
Sorin Daniel Porojan ◽  
Mihaela Ionela Bîrdeanu ◽  
Liliana Porojan
Keyword(s):  
Surface Roughness ◽  
Optical Properties ◽  
Glass Ceramic ◽  
Glass Ceramics ◽  
Lithium Disilicate ◽  
Ceramic Materials ◽  
Surface Treatments ◽  
Lithium Silicate ◽  
Before And After ◽  
Cad Cam

Dental ceramic restorations are widely spread nowadays due to their aesthetics and biocompatibility. In time, the colour and structure of these ceramic materials can be altered by aging processes. How does artificial aging affect the optical and surface roughness of ceramics? This study aims to assess the effect of thermocycling, surface treatments and microstructure upon translucency, opalescence and surface roughness on CAD-CAM and heat-pressed glass-ceramic. Forty-eight samples (1.5 mm thickness) were fabricated from six types of A2 MT ceramic: heat-pressed and milled glass-ceramic (feldspathic, lithium disilicate and zirconia reinforced lithium silicate). The samples were obtained respecting the manufacturer’s instructions. The resulted surfaces (n = 96) were half glazed and half polished. The samples were subjected to thermocycling (10,000 cycles) and roughness values (Ra and Rz), colour coordinates (L*, a*, b*) and microstructural analyses were assessed before and after thermocycling. Translucency (TP) and opalescence (OP) were calculated. Values were statistically analysed using ANOVA test (one way). TP and OP values were significantly different between heat-pressed and milled ceramics before and also after thermocycling (p < 0.001). Surface treatments (glazing and polishing) had a significant effect on TP and OP and surface roughness (p < 0.05). The heat-pressed and milled zirconia reinforced lithium silicate glass-ceramic experienced a loss in TP and OP. Ra and Rz increased for the glazed samples, TP and OP decreased for all the samples after thermocycling. Microstructural analyse revealed that glazed surfaces were more affected by the thermocycling and especially for the zirconia reinforced lithium silicate ceramic. Optical properties and surface roughness of the chosen ceramic materials were affected by thermocycling, surface treatments and microstructural differences. The least affected of the ceramics was the lithium disilicate ceramic heat-pressed polished and glazed.

Three-year Clinical Performance of Two Giomer Restorative Materials in Restorations

2021 ◽  
Vol 46 (1) ◽  
pp. E60-E67
Author(s):  
F Ozer ◽  
O Irmak ◽  
O Yakymiv ◽  
A Mohammed ◽  
R Pande ◽  
...  
Keyword(s):  
Clinical Performance ◽  
Class I ◽  
Restorative Material ◽  
Secondary Caries ◽  
Total N ◽  
Marginal Integrity ◽  
Significant Difference ◽  
Restorative Materials ◽  
Postoperative Sensitivity

Clinical Relevance The clinical performance of both conventional and flowable giomer restorative materials was particularly good in Class I restorations after three years of service. SUMMARY This study evaluated and compared the clinical performance of a flowable and a conventional giomer restorative material after three years. Forty-four pairs of restorations (total n=88) were placed in Class I cavities with either a flowable giomer (Beautifil Flow Plus F00; Shofu Inc, Kyoto, Japan) or a conventional giomer restorative material (Beautifil II; Shofu Inc) after the application of a dentin adhesive (FL-Bond II; Shofu Inc) and a flowable liner (Beautifil Flow Plus F03; Shofu Inc). After 3 years, 39 pairs of restorations were evaluated with the modified United States Public Health Service criteria, and digital color photographs of restorations were taken at each patient visit. The evaluation parameters were as follows: color match, marginal integrity, marginal discoloration, retention, secondary caries formation, anatomic form, surface texture, and postoperative sensitivity. Evaluations were recorded as a clinically ideal situation (Alpha), a clinically acceptable situation (Bravo), or a clinically unacceptable situation (Charlie). Data were analyzed with Fisher’s exact and McNemar tests (α=0.05). None of the restorations showed retention loss, postoperative sensitivity, secondary caries, or color change. The performance of Beautifil II in terms of marginal integrity, marginal discoloration, and surface anatomic form was significantly lower at the 36-month follow-up than at baseline (p=0.007). There were no significant differences between the baseline and 36-month follow-up scores for the other criteria for Beautifil II (p&gt;0.05). No differences were found between the baseline and the 36-month follow-up scores for any of the criteria for Beautifil Flow Plus F00 (p&gt;0.05). No statistically significant difference in overall clinical performance was found between the 2 materials after 36 months (p&gt;0.05). The three-year clinical performance of both restorative materials (Beautifil Flow Plus F00 and Beautifil II) was very good and not significantly different for any of the parameters evaluated.

Clinical Evaluation of Lithium Disilicate Veneers Manufactured by CAD/CAM Compared with Heat-pressed Methods: Randomized Controlled Clinical Trial

2021 ◽  
Vol 46 (1) ◽  
pp. 4-14
Author(s):  
IBL Soares-Rusu ◽  
CA Villavicencio-Espinoza ◽  
NA de Oliveira ◽  
L Wang ◽  
HM Honório ◽  
...  
Keyword(s):  
Clinical Performance ◽  
Statistical Significance ◽  
United States Public Health ◽  
Lithium Disilicate ◽  
The United States ◽  
Marginal Adaptation ◽  
Fabrication Technique ◽  
Level Of Satisfaction ◽  
Cad Cam

Clinical Relevance Lithium disilicate veneers for esthetic restorations show great accuracy and similarity, regardless of the type of fabrication technique. SUMMARY Objectives: This study aimed to evaluate and compare the clinical performance of two different ceramic veneer methods: CAD/CAM (IPS e.max CAD) and heat-press (IPS e.max Press) at 6 and 12 months of follow-up, and the level of patient satisfaction after treatment. Methods and Materials: Patients were selected according to eligibility criteria, with a minimum of two and a maximum of six veneers per patient, for a total of 178 veneers randomized in two groups. A split-mouth, longitudinal, interventional, double-blind and single-center study was carried out according to the fabrication technique. Scores were attributed to the veneers according to the criteria of the United States Public Health Service (USPHS) regarding marginal adaptation, color change, marginal discoloration, restoration fracture, tooth fracture, restoration wear, antagonist tooth wear, presence of caries, and postoperative sensitivity. All patients answered a satisfaction questionnaire using the Visual Analogue Scale (VAS). Statistical significance was determined using two-way ANOVA and Tukey test, with a significance level of 5%. Results: The marginal adaptation criterion showed statistical difference between periods (p=0.017), regardless of the processing method (baseline means: CAD=1.056, PRESS=1.067, 6- to 12-month follow-up: CAD=1.089, PRESS=1.078). The other evaluated criteria showed no statistical differences between baseline and after 6 to 12 months. The level of satisfaction assessed by the VAS before and after treatment was 7.06 and 9.5, respectively. Conclusions: The two methods presented similar clinical performance after 12 months, and the patient’s level of satisfaction was considered high.

scholarly journals Full Zirconia Implant-Born Prosthetic Rehabilitation with CAD/CAM Technology after Accurate Digital Planning. A Case Report

2021 ◽  
Vol 18 (15) ◽  
pp. 7998
Author(s):  
Riccardo Scaringi ◽  
Michele Nannelli ◽  
Alessio Franchina ◽  
Giuseppe Lizio ◽  
Luigi V. Stefanelli ◽  
...  
Keyword(s):  
Soft Tissues ◽  
Ceramic Materials ◽  
Surgical Removal ◽  
Holistic Treatment ◽  
Single Crown ◽  
Digital Planning ◽  
Cad Cam ◽  
Treatment Philosophy ◽  
Zirconia Implant

CAD/CAM technology can enhance the dentistry application of ceramic materials that meet the more relevant biocompatibility and aesthetics demands. In implant-borne prosthesis rehabilitation, yttria-stabilized zirconia appeared to be a valid alternative to metal-alloys and titanium, with comparable mechanical properties and even better interaction with bone and soft tissues. The improvement of monolithic CAD/CAM manufacturing allows for a reliable, predictable, and rapid workflow that can correspond to a holistic treatment philosophy associated with zirconia fixtures. This reported clinical case highlights the advantages of this approach in resolving particularly functionally and aesthetically complex situations. A 40-year-old patient with permanent canine impaction and the persistence of a deciduous tooth compromised by caries was successfully rehabilitated with the surgical removal of the enclosed tooth, the seating of a mono-phase zirconia implant after the deciduous extraction and its loading with a zirconia single crown, without any clinical or radiographical alteration up to seven years follow-up.

scholarly journals Comparative study between fat plug and inlay butterfly cartilage grafts for myringoplasty in adults

2021 ◽  
Vol 37 (1) ◽  
Author(s):  
Ahmed Gamal Khafagy ◽  
Mohamed El-Begermy ◽  
Marwa Mohamed El-Begermy ◽  
Pretty O. Afifi
Keyword(s):  
Tympanic Membrane ◽  
Chronic Otitis Media ◽  
Fat Graft ◽  
Cartilage Graft ◽  
Tympanic Membrane Perforations ◽  
Number Of Patients ◽  
Significant Difference ◽  
Hearing Outcomes ◽  
Age Range

Abstract Background This study aims to compare the graft uptake rate and hearing improvement of fat graft versus inlay butterfly tragal cartilage in the repair of perforations in chronic otitis media mucosal in adults. In this retrospective study, twenty-eight patients were included with small dry anteroinferior tympanic membrane perforations (less than 1/3 of the tympanic membrane). The age range was 18 to 44 years old. Myringoplasty was done under general anesthesia for 8 patients with a fat graft (FG) and 20 patients with inlay butterfly cartilage graft (IBCG). Six months postoperatively, a follow-up evaluation was done for successful graft uptake and hearing outcomes. Results The success rate of graft uptake in the first group (fat graft) was 6/8 cases (75%) while in the second group (IBCG) was 19/20 (95%) with no statistically significant difference (P = 0.0148). Also, there was no statistical difference between the two groups as regards postoperative ABG, improvement changes in ABG, and number of patients with improved hearing. Conclusions Inlay butterfly cartilage graft is a useful graft in repairing small tympanic membrane perforations as regard graft take and hearing outcomes.

A two different chemoprophylaxis approaches after phacoemulsification surgery in one thousand patients in Iraq

2020 ◽  
Vol 1 (3) ◽  
pp. 154-159
Author(s):  
Suzan Amana Rattan ◽  
◽  
Mahir Kadhim Mutashar ◽  
Keyword(s):  
Treated Group ◽  
The Other ◽  
Eye Drops ◽  
Topical Medication ◽  
Group Methods ◽  
Significant Difference ◽  
Infection And Inflammation ◽  
Group 2 ◽  
Age Range

AIM: To evaluate the effectivity of the combination of intracameral moxifloxacin 0.1% with subconjunctival triamcinolone acetonide 4 mg as prophylaxis of infection and inflammation after phacoemulsification in comparison with topical medication treated group. METHODS: A total one thousand patients with age range from 38 to 70 years old who scheduled for phacoemulsification were divided into 2 groups of no statistically significant differences in age, preoperative intraocular pressure (IOP) and central macular thickness (CMT), P=0.6, 0.9 and 0.8 respectively. The surgeries were done by 2 surgeons each one planned to use one method of prophylaxis at Eye Speciality Private hospital, Baghdad, Iraq. For the 1st group of patients (500) a topical moxifloxacin hydrochloride 0.5% and dexamethasone 0.1% eye drops were prescribed four times a day for 1mo postoperatively. For the 2nd group intracameral (IC) diluted moxifloxacin at 0.1% with subconjunctival (SC) triamcinolone 4mg in 0.4 cc were administered at the conclusion of the surgery. Follow up visits were on the first postoperative day, 1wk, 1mo, and 3mo postoperatively. Anterior chamber (AC) reaction was examined during the 4 visits while IOP was measured during the last 3 and CMT was measured only in the last one. RESULTS: The current clinical trial study compared 2 samples with 2 different prophylaxis methods. No endophthalmitis case reported in both group. By a 2-Sample t-test, the IC-treated group (group 2) had statistically significant lower AC cells at the 1st day postoperative visit than the other group while there were no statistically significant differences at 1wk, 1 mo and 3mo visits between the 2 groups. There was no statistically significant difference at 3mo visits in IOP and CMT between the two groups. A breakthrough inflammation rate with the topical medication was (9.6%) while in the other group (IC treated ) was 4.0%. A significant IOP elevation ≥10 mm Hg at 1mo in 2.4% within the topical medication group which was higher than the rate in the other group (0.8%). CONCLUSION: In addition to the safety and effectivity of the combination of intracameral moxifloxacin and subconjunctival triamcinolone in preventing infection and inflammation after cataract surgery. The majority (480) of our included patients didn’t require any topical postoperative medication that is cost saving for the patient, helped patients who were unable to administer topical medication, and decreased chance of complication related to patient poor adherence to postoperative medication.

scholarly journals A pilot trial on lithium disilicate partial crowns using a novel prosthodontic Functional Index for Teeth (FIT)

2019 ◽  
Author(s):  
Edoardo Ferrari Cagidiaco ◽  
Simone Grandini ◽  
Cecilia Goracci ◽  
Tim Joda
Keyword(s):  
Clinical Performance ◽  
Pilot Trial ◽  
Lithium Disilicate ◽  
Bone Biology ◽  
Functional Index ◽  
Posterior Teeth ◽  
Significant Difference ◽  
Group 2 ◽  
Technical Complication ◽  
Level Of Significance

Abstract Background Lithium disilicate is now a well accepted material for indirect restorations. The aim of this trial was to evaluate two lithium disilicate systems using a novel prosthodontic Functional Index for Teeth (FIT).Methods Partial adhesive crowns on natural abutment posterior teeth were made on sixty patients (clinicaltrial.gov # NCT 01835821). Patients were divided into two groups: Group 1 e.max press (Ivoclar), Group 2 LiSi press (GC Co.). The restorations were followed-up for 3 years. The FIT is composed of seven variables (Interproximal, Occlusion, Design, Mucosa, Bone, Biology and Margins), each of them to be evaluated using a 0-1-2 scoring scheme. The Mann-Whitney ‘U’ test was applied. The level of significance was set at p<0,05.Results Survival rate was 100%, without any biological or technical complication. No statistically significant difference emerged between the two groups in any of the assessed variables (p>0.05).Conclusions The results showed that it is possible to evaluate the clinical performance of partial crowns using FIT. The FIT proved to be an effective tool to foresee the possible risk of failures and to monitor the performance of the restorations at each recall. The two lithium dislocate materials showed same results after 3 years of clinical service.

scholarly journals LED and Halogen Light Transmission through a CAD/CAM Lithium Disilicate Glass-Ceramic

2015 ◽  
Vol 26 (6) ◽  
pp. 648-653 ◽  
Author(s):  
Carolina Nemesio de Barros Pereira ◽  
Cláudia Silami de Magalhães ◽  
Bruno Daleprane ◽  
Rogéli Tibúrcio Ribeiro da Cunha Peixoto ◽  
Raquel da Conceição Ferreira ◽  
...  
Keyword(s):  
Regression Model ◽  
Glass Ceramic ◽  
Light Transmission ◽  
Light Attenuation ◽  
Lithium Disilicate ◽  
Strong Negative Correlation ◽  
Halogen Light ◽  
Significant Difference ◽  
Cad Cam ◽  
Ceramic Thickness

The effect of thickness, shade and translucency of CAD/CAM lithium disilicate glass-ceramic on light transmission of light-emitting diode (LED) and quartz-tungsten-halogen units (QTH) were evaluated. Ceramic IPS e.max CAD shades A1, A2, A3, A3.5, high (HT) and low (LT) translucency were cut (1, 2, 3, 4 and 5 mm). Light sources emission spectra were determined. Light intensity incident and transmitted through each ceramic sample was measured to determine light transmission percentage (TP). Statistical analysis used a linear regression model. There was significant interaction between light source and ceramic translucency (p=0.008) and strong negative correlation (R=-0.845, p<0.001) between ceramic thickness and TP. Increasing one unit in thickness led to 3.17 reduction in TP. There was no significant difference in TP (p=0.124) between shades A1 (ß1=0) and A2 (ß1=-0.45) but significant reduction occurred for A3 (ß1=-0.83) and A3.5 (ß1=-2.18). The interaction QTH/HT provided higher TP (ß1=0) than LED/HT (ß1=-2.92), QTH/LT (ß1=-3.75) and LED/LT (ß1=-5.58). Light transmission was more effective using halogen source and high-translucency ceramics, decreased as the ceramic thickness increased and was higher for the lighter shades, A1 and A2. From the regression model (R2=0.85), an equation was obtained to estimate TP value using each variable ß1 found. A maximum TP of 25% for QTH and 20% for LED was found, suggesting that ceramic light attenuation could compromise light cured and dual cure resin cements polymerization.

Esthetic and Clinical Performance of Implant-Supported All-Ceramic Crowns Made with Prefabricated or CAD/CAM Zirconia Abutments: A Randomized, Multicenter Clinical Trial

2016 ◽  
Vol 96 (2) ◽  
pp. 163-170 ◽  
Author(s):  
J.G. Wittneben ◽  
J. Gavric ◽  
U.C. Belser ◽  
M.M. Bornstein ◽  
T. Joda ◽  
...  
Keyword(s):  
Clinical Trial ◽  
Clinical Performance ◽  
Multicenter Clinical Trial ◽  
Anterior Maxilla ◽  
Single Crown ◽  
Significant Difference ◽  
All Ceramic ◽  
Cad Cam ◽  
Group A ◽  
Group B

Patients’ esthetic expectations are increasing, and the options of the prosthetic pathways are currently evolving. The objective of this randomized multicenter clinical trial was to assess and compare the esthetic outcome and clinical performance of anterior maxillary all-ceramic implant crowns (ICs) based either on prefabricated zirconia abutments veneered with pressed ceramics or on CAD/CAM zirconia abutments veneered with hand buildup technique. The null hypothesis was that there is no statistically significant difference between the 2 groups. Forty implants were inserted in sites 14 to 24 (FDI) in 40 patients in 2 centers, the Universities of Bern and Geneva, Switzerland. After final impression, 20 patients were randomized into group A, restored with a 1-piece screw-retained single crown made of a prefabricated zirconia abutment with pressed ceramic as the veneering material using the cut-back technique, or group B using an individualized CAD/CAM zirconia abutment (CARES abutment; Institut Straumann AG) with a hand buildup technique. At baseline, 6 mo, and 1 y clinical, esthetic and radiographic parameters were assessed. Group A exhibited 1 dropout patient and 1 failure, resulting in a survival rate of 94.7% after 1 y, in comparison to 100% for group B. No other complications occurred. Clinical parameters presented stable and healthy peri-implant soft tissues. Overall, no or only minimal crestal bone changes were observed with a mean DIB (distance from the implant shoulder to the first bone-to-implant contact) of −0.15 mm (group A) and 0.12 mm (group B) at 1 y. There were no significant differences at baseline, 6 mo, and 1 y for DIB values between the 2 groups. Pink esthetic score (PES) and white esthetic score (WES) values at all 3 examinations indicated stability over time for both groups and pleasing esthetic outcomes. Both implant-supported prosthetic pathways represent a valuable treatment option for the restoration of single ICs in the anterior maxilla ( ClinicalTrials.gov NCT02905838).

Sign in / Sign up

Export Citation Format

Share Document