scholarly journals Agronomic yield and quality of industrial tomatoes under NPK doses

2020 ◽  
Vol 24 (1) ◽  
pp. 59-64 ◽  
Author(s):  
Maria N. Almeida Neta ◽  
Wagner F. da Mota ◽  
Rodinei F. Pegoraro ◽  
Maricelia C. Pacheco ◽  
Caik M. Batista ◽  
...  
Keyword(s):  
Block Design ◽  
Efficiency Index ◽  
Climatic Conditions ◽  
Soluble Solids ◽  
Fertilizer Efficiency ◽  
Post Harvest ◽  
Industrial Yield ◽  
Weight Number ◽  
Agronomic Yield

ABSTRACT High doses of nitrogen, phosphorus and potassium in irrigated systems may lead to an increase in the productivity of industrial tomatoes, but may also alter the final quality of the fruits. The objective of this was to evaluate the agronomic yield and post-harvest quality of industrial tomatoes, under NPK doses for climatic conditions of Northern Minas Gerais state, Brazil. The study was conducted in the city of Jaíba, MG, Brazil, in randomized block design with four repetitions in a 3 x 3 factorial scheme, consisting of three doses of N (90, 135 and 180 kg ha-1), of P (270, 405 and 540 kg ha-1) and of K (225, 337 and 450 kg ha-1), corresponding to 50, 75 and 100% of the fertilization recommendation; and three tomato hybrids: BRS Sena, Heinz 9553 and BHN 0574. The following variables were evaluated: number of bunches, number and weight of fruits, productivity and fertilizer efficiency index; besides the physico-chemical characteristics: firmness, soluble solids concentration, pH and pulp industrial yield. The hybrid Heinz 9553 showed higher weight, number of fruits, productivity and industrial yield at doses of 75 and 100% of NPK recommendation. The fertilizer doses did not interfere on the soluble solids, pH and fruit firmness of the three hybrids. The hybrid BRS Sena was not influenced by the increase of NPK and there was lower weight, number of fruits, productivity and fertilization efficiency. The hybrid BHN and Heinz hybrids can be indicated for cultivation at doses of 100 and 75% of NPK recommendation, because they promote higher agronomic yield and do not alter the post-harvest quality of the tomatoes.

scholarly journals Qualitative attributes and postharvest conservation of green ears of maize grown on different cover crops in organic no-till system

Revista CERES ◽  
2016 ◽  
Vol 63 (4) ◽  
pp. 532-537 ◽  
Author(s):  
Luiz Fernando Favarato ◽  
Jacimar Luiz de Souza ◽  
João Carlos Cardoso Galvão ◽  
Caetano Marciano de Souza ◽  
José Mauro de Souza Balbino ◽  
...  
Keyword(s):  
Shelf Life ◽  
Cover Crops ◽  
Block Design ◽  
Climatic Conditions ◽  
Soluble Solids ◽  
Postharvest Quality ◽  
White Lupin ◽  
No Till ◽  
Grain Moisture

ABSTRACT Postharvest quality of sweet maize varies depending on the type of seed, soil, quality of fertilizer, climatic conditions, and stage of maturation. This study aimed to evaluate the post-harvest quality and shelf life of green ears of maize grown on three soil covers in organic no-till sytem. The study was conducted in the municipality of Domingos Martins, ES (20° 22'16.91" S and 41° 03' 41.83" W). The experiment was arranged in a randomized block design with six replications and five treatments, consisting of three cover crops in organic no-till system: black-oat straw, white lupin, oat/lupin intercrop and two systems, organic and conventional, without straw. Maize double hybrid AG-1051 was sown in a spacing of 1.00 x 0.20 m. The variables evaluated included relative percentage of grain, straw and cob, pH, titratable acidity, soluble solids, grain moisture and shelf life. The use of different straws in the organic no-till system does not influence the postharvest quality of green ears. Ears packed in polystyrene trays with plastic film are suitable for marketing until the fifth day of storage at room temperature.

scholarly journals Post-harvest quality of ‘Vitória’ pineapple as a function of the types of shoots and age of the plant for floral induction

2018 ◽  
Vol 40 (4) ◽  
Author(s):  
Dayane Littig Barker ◽  
Sara Dousseau Arantes ◽  
Edilson Romais Schmildt ◽  
Lúcio de Oliveira Arantes ◽  
Patrícia Soares Furno Fontes ◽  
...  
Keyword(s):  
Significant Interaction ◽  
Floral Induction ◽  
Block Design ◽  
Soluble Solids ◽  
Post Harvest ◽  
Randomized Block Design ◽  
Different Types ◽  
Crown Biomass ◽  
Induction Times

Abstract For the production and quality of pineapple fruits, the appropriate choice of the type of propagule to be used combined with the management of the ages for floral induction are important factors to reach the maximum of desirable characteristics that will define the success in the production of the pineapple and its good acceptance in the market. The objective of this research was to evaluate the post-harvest quality of fruits developed from different types of shoots and ages of floral induction of ‘Vitória’ pineapple. The experiment was carried out in a complete randomized block design with four replications. The plots were made up of the shoots (slip and sucker) and the subplots were composed of the different ages of floral induction (8, 10 and 12 months after planting and natural flowering). Evaluations of biomass characteristics of fruits with and without crown, circumference, length, diameter, firmness, translucency, pulp color and physicochemical quality were performed. No significant interaction was observed for the biometric and biomass variables, and the type of shoots influenced only the crown biomass and the central cylinder diameter, which were higher in the slips. In addition, for the attributes color, translucent area and firmness, no interaction was found, and they were influenced only by the induction times, except for the variable color referring to the intensity of green and red colors. Regardless of the types of the shootss evaluated in the environmental conditions of planting carried out in April 2015, the fruits originated from natural inductions and inductions at 12 months presented greater firmness, a desirable characteristic for export and industrialization, mainly for the processing of slices of pineapple, pieces in syrup and crystallized. The slips natural induced and induced at 12 months provided fruits with a greater ratio between soluble solids and acidity.

scholarly journals Quality of Italian tomatoes grown with different forms of calcium application

2020 ◽  
Vol 9 (12) ◽  
pp. e10191210837
Author(s):  
Isa Gabriela Vieira de Andrade ◽  
Gilmário Noberto de Souza ◽  
Eduardo Santana Aires ◽  
Ítala Laiane Silva Gomes ◽  
Ruy de Carvalho Rocha ◽  
...  
Keyword(s):  
Block Design ◽  
Titratable Acidity ◽  
Soluble Solids ◽  
Fruit Firmness ◽  
Post Harvest ◽  
Randomized Block Design ◽  
Randomized Design ◽  
Tree Fruits ◽  
Fruit Mass

Tomato is one of the most consumed vegetables in the world. This work aimed to evaluate post-harvest quality of Italian Saladete tomatoes grown in a protected environment, with different ways of calcium application, in the Middle São Francisco Valley. Consisting of five Italian tomato hybrids (Anjico, Gabrielle, Liberty, Ty 2006 and Shanty), and three different ways of calcium application (T0 without application of calcium; T1 application of calcium in the opening flower, and T2 weekly application of calcium in the fruit).  Poductivity, average fruit mass, incidence of apical rot, fruit firmness, soluble solids (SS), titratable acidity (AT), and pH, were analized. The experimental design used was a completely randomized block design in a factorial scheme (five cultivars x three ways of calcium application), with three repetition and using two central plants as useful plot for analysis, except for fruit firmness that was carried out in a completely randomized design, using tree fruits per analysis. According to the results obtained, hybrids of Italian saladete tomatoes behaved in a satisfactory manner, therefore it is recommended to cultivate hybrids of Italian saladete tomatoes in the Middle São Francisco Valley, mainly hybrid Anjico. Calcium application way did not interfere with post-harvest attributes.

PRODUÇÃO DE AÇÚCARES NO CALDO DE SORGO SACARINO AVALIADO EM DUAS ÉPOCAS DE CORTE

2018 ◽  
Vol 17 (2) ◽  
pp. 263
Author(s):  
VANESSA APARECIDA PEREIRA BATISTA ◽  
VANUCCI ZILDA PEREIRA BATISTA ◽  
LEONARDO DUARTE PIMENTEL ◽  
ANGÉLICA FÁTIMA DE BARROS ◽  
TIAGO DA SILVA MOREIRA ◽  
...  
Keyword(s):  
Sorghum Bicolor ◽  
High Performance ◽  
Block Design ◽  
Climatic Conditions ◽  
Extraction Rate ◽  
Soluble Solids ◽  
Total Sugars ◽  
Industrial Performance ◽  
Solids Content

RESUMO - Objetivou-se avaliar a produção quantitativa e qualitativa dos açúcares produzidos no caldo de sorgo sacarino, em duas épocas de corte. Utilizou-se o delineamento em blocos casualizados com 6 repetições, em parcelas subdivididas no tempo, avaliando três cultivares de sorgo sacarino (BD 5404, BRS 511 e BD1615). Ao final de cada ciclo, foram avaliados produtividade de colmos, taxa de extração, teor de sólidos solúveis (ºBrix) e os açúcares totais (sacarose, glicose e frutose) presentes no caldo, sendo estes quantificados em cromatografia líquida de alta precisão (HPLC). Verificou-se que as cultivares apresentaram a maior produtividade de colmos na safra em comparação com a rebrota, sendo 64,50 e 9,23 t ha-1, respectivamente. A taxa de extração do caldo foi menor na rebrota. O teor de açúcares totais presente no caldo não diferiu entre as duas safras, apresentando média de 94 g L-1. O ºBrix diferiu tanto entre as cultivares como entre as safras. Apenas a cultivar BRS 511 apresentou a mesma proporção de açúcares presentes no caldo, nas duas safras, com maior teor de sacarose produzido. Conclui-se que as condições climáticas afetam os caracteres agronômicos e industriais do sorgo sacarino. A cultivar BRS 511 apresentou o melhor desempenho agronômico e industrial visando à produção de etanol. A quantidade de açúcares produzidos não variou em função do ciclo, mas a qualidade dos açúcares (sacarose, glicose e frutose) variou de acordo com a cultivar.Palavras-chave: Sorghum bicolor, produtividade, açúcares fermentescíveis, HPLC. SUGARS PRODUCTION IN SWEET SORGHUM BROTH IN TWO CUTTING TIMES  ABSTRACT - The objective of this study was to evaluate the quantitative and qualitative production of sugars in sorghum broth at two cutting times. A randomized complete block design with six replications was used in plot subdivided in time evaluating three cultivars of sorghum saccharine (BD 5404, BRS 511 and BD1615). At the end of each cycle, shoot yield, extraction rate, soluble solids content (ºBrix) and total sugars (sucrose, glucose and fructose) present in the broth were evaluated, and these were quantified by high performance liquid chromatography (HPLC). Cultivars showed higher productivity of shoots in the crop compared to regrowth, with 64.50 and 9.23 t ha-1, respectively. The broth extraction rate was lower at regrowth. The total sugars content in the broth did not differ between the two harvests, with an average of 94 g L-1. Brix differed between cultivars and between crop seasons. Only the cultivar BRS 511 presented the same proportion of sugars in the broth, in the two harvests, with higher content of sucrose. As conclusion, the climatic conditions affected the agronomic and industrial characteristics of sorghum saccharine; the cultivar BRS 511 presented the best agronomic and industrial performance regarding ethanol production; the amount of sugars produced did not change with the different cycles and the quality of sugars (sucrose, glucose and fructose) varied among cultivars.Keywords: Sorghum bicolor, productivity, fermentable sugars, HPLC.

The Harvest Season Changes the Organoleptic Properties of Onion during Storage

2019 ◽  
pp. 1-9
Author(s):  
Ariana Pereira Mota ◽  
Renata Ranielly Pedroza Cruz ◽  
Ana Paula Sato Ferreira ◽  
Mateus De Paula Gomes ◽  
Maria Eduarda da Silva Guimarães ◽  
...  
Keyword(s):  
Phenolic Compounds ◽  
Reducing Sugars ◽  
Block Design ◽  
Soluble Sugars ◽  
Titratable Acidity ◽  
Soluble Solids ◽  
Organoleptic Properties ◽  
Post Harvest ◽  
Randomized Block Design

Aims: The objective was to determine the influence of the onion harvest time "Baia Periforme" on post-harvest quality of the bulbs during storage. Study Design: The experiment was conducted in a randomized block design with three treatments, six replicates with two bulbs each. Place and Duration of Study: Departamento de Fitotecnia, Universidade Federal de Viçosa, between June 2017 and July 2018. Methodology: Seedlings, 20 days old, were transplanted into 20 cm spacing between rows and 10 cm between plants. The bulbs were harvested 120 days after transplanting with manual tipping of the pseudo-stem (T1), with 50 (T2) or 75% (T3) of the bulbs popped. The soluble sugars (SS), non-reducing sugars (NRS), reducing sugars (RS), total soluble solids (TSS), titratable acidity of phenolic compounds and alinase activity was determined every 30 days for 90 days. Results: The content of SS, TSS, phenolic compounds and alinase activity increased in the onions of T2, resulting in more sweet and pungent bulbs due to the higher content of acidity and phenolic compounds. Conclusion: The post-harvest quality of onion bulbs "Baia Periforme" was maintained when they were harvested with 50% of bulbs popped.

scholarly journals Effect of different levels and sources of calcium on post harvest physiology of hybrid tomatoes (Solanum lycopersicum)

2021 ◽  
Vol 13 (4) ◽  
pp. 1357-1364
Author(s):  
S. Salma Santhosh ◽  
T. Chitdeshwari ◽  
D. Jegadeeswari ◽  
C. Kavitha
Keyword(s):  
Moisture Content ◽  
Solanum Lycopersicum ◽  
Block Design ◽  
Calcium Nitrate ◽  
Poultry Manure ◽  
Storage Period ◽  
Titratable Acidity ◽  
Soluble Solids ◽  
Post Harvest

Due to high respiration and ethylene production, tomato (Solanum lycopersicum) is highly perishable horticulture produce that deteriorates faster during the post-harvest storage period. Calcium nutrition is important to overcome these losses as it helps in retarding ripening process during storage and improve the post-harvest quality tomatoes. Hence a field experiment was conducted with different calcium sources and levels viz., Calcium sulphate, Calcium Nitrate, Calcium silicate, Poultry manure and Pressmud applied at 0, 20, 40, 60 and 80 kg Ca ha-1. A storage study was conducted in a factorial completely randomized block design (FCRD) to ensure the effective role of calcium in post-harvest quality of hybrid tomato. Tomatoes were analyzed for pH of fruit juice, firmness, titratable acidity, total soluble solids, moisture content and physiological loss at five days intervals upto 15 days. The results revealed thatCalcium sources and levels had highly significant impacts on the quality of tomato fruits. The tomatoes harvested from the plot applied with poultry manure at 80 kg Ca ha-1 retained the highest fruit firmness(3.76 N m-1), moisture content (88.2%) and the lowest weight loss (8.82%) in fruit, highertitratable acidity (0.41%), lesser pH (3.61)andtotal soluble solids (4.23 ˚Brix). Hence the application of poultry manure at 80 kg Ca ha-1was beneficial in improving the quality and extending the storage life of hybrid tomatoes.

scholarly journals Yield and quality of strawberry cultivars

2010 ◽  
Vol 28 (2) ◽  
pp. 222-226 ◽  
Author(s):  
Luis Eduardo C Antunes ◽  
Nara Cristina Ristow ◽  
Ana Cristina R Krolow ◽  
Sílvia Carpenedo ◽  
Carlos Reisser Júnior
Keyword(s):  
Statistical Design ◽  
Rio Grande ◽  
Titratable Acidity ◽  
Fruit Weight ◽  
Climatic Conditions ◽  
Soluble Solids ◽  
Experimental Unit ◽  
Rio Grande Do Sul ◽  
Yield And Quality

The strawberry cultivation is an important economic activity in the Rio Grande do Sul State, Brazil, however the number of offered cultivars to the growers is reduced. The yield and quality of strawberry (Fragaria x ananassa Duch.) cultivars Camarosa, Galexia, Earlibrite, Festival, Plarionfre and Sabrosa was evaluated under the climatic conditions of Pelotas, Rio Grande do Sul State. We determined the number, mass, total soluble solids (TSS ºBrix), total titratable acidity (TTA), antocianin level and fresh fruits produced in an experimental unit. We also determined the production of fruits per hectare and per plant. The statistical design used in the experiment was of completely randomized blocks with 6 treatments (cultivars) and 4 replicates where the experimental unit was composed of 8 plants. The harvest began in the first half of August, extending to the second half of December, totalling 20 weeks. Plarionfre, Earlibrite and Festival cultivars showed higher production from the first half of October until the end of the first half of November. Camarosa reached higher productivity, mass of plants and fruit weight. There were no differences between the evaluated cultivars in the levels of TSS, antocianin, ATT and pH during the period of evaluation.

scholarly journals Production and quality of melon hybrid Mandacaru irrigated with different levels of salinity

2011 ◽  
Vol 29 (4) ◽  
pp. 600-604 ◽  
Author(s):  
Damiana Cleuma de Medeiros ◽  
José Francismar de Medeiros ◽  
Francisco Aécio de L Pereira ◽  
Sonally Cristina de M Silva ◽  
Maria das Graças Amâncio
Keyword(s):  
Block Design ◽  
Fruit Production ◽  
Solid Content ◽  
Salinity Level ◽  
Soluble Solids ◽  
Northeastern Brazil ◽  
Soluble Solid Content ◽  
Salinity Levels ◽  
Solids Content

Among the problems faced by the melon crop in the state of Rio Grande do Norte, northeastern Brazil, the effect of water and soil salinity is considered one of the key factors to limit fruit production and quality. The aim of this work was to study the effects of using irrigation waters with different salinity levels on yield and quality of fruits of the yellow melon hybrid Mandacaru. A randomized complete block design was used with five treatments (irrigation water salt concentrations: 0.54, 1.48, 2.02, 3.03, 3.9 dS m-1) and four replications. The effects of these concentrations were evaluated through, number of marketable fruits per plant, marketable and total fruit yield, average marketable fruit mass, soluble solids content and pulp firmness. Increment in water salinity level negatively influenced crop yield. The 3.9 dS m-1 salinity level caused yield losses of 20.31%, due to the reduction of fruit number per plant. The highest soluble solid content and the highest pulp firmness values were estimated to occur at salinity levels 2.09 and 3.5 dS m-1, respectively.

scholarly journals Quality of Tomato (Solanum lycopersicum L.) Due to Grafting in Solanaceae of Different Species

2019 ◽  
Vol 11 (3) ◽  
pp. 188
Author(s):  
João Lucas Moraes Vieira ◽  
Rogério Eiji Hanada
Keyword(s):  
Block Design ◽  
Tomato Fruit ◽  
Titratable Acidity ◽  
Soluble Solids ◽  
Control Treatment ◽  
Tomato Cultivar ◽  
Tomato Crop ◽  
Significant Difference ◽  
Four Blocks

The present work had as objective to evaluate the physical-chemical characteristics of commercial tomato fruits grafted on different solanaceous species. The experiment was conducted in a greenhouse, in a randomized complete block design, with four blocks and six treatments, being the rootstocks: cocona (Solanum sessiliflorum); two cultivars of eggplant (Solanum aethiopicum), Long Light Green and Big Hill; jurubebão (Solanum lycocarpum) and jurubeba juna (Solanum stramonifolium), grafted with the tomato cultivar Santa Cruz Kada, and the control treatment was represented by the self-grafted tomato. Three consecutive harvests were spaced seven days after the production stabilization, and the characteristics fruits analyzed were Total Soluble Solids (ºBrix), pH, Titratable Acidity (percentage of citric acid) and TSS/TA. A statistically significant difference was found in the Tukey’s test at 5% probability in the titratable acidity, pH and fruit pulp flavor, among the evaluated treatments, while the soluble solids content did not differ between treatments in any of the harvests, but the values remained within the considered adequate for the tomato in natura in the current literature. There was a decrease in fruit flavor in all treatments, and fruit pH drop in all treatments with the exception of jurubebão, with the advancement of plant age, while the titratable acidity had an inverse behavior. The evaluated rootstocks can be used in the tomato crop, without prejudice to the quality of the tomato fruit produced.

scholarly journals Melon fruit yield and quality as a function of doses and times of biostimulant application

2020 ◽  
Vol 9 (7) ◽  
pp. e130973911
Author(s):  
Roberto Cleiton Fernandes de Queiroga ◽  
Zaqueu Lopes da Silva ◽  
Odair Honorato Oliveira de ◽  
Elidayane da Nóbrega Santos ◽  
Higínio Luan Oliveira Silva ◽  
...  
Keyword(s):  
Block Design ◽  
Fruit Production ◽  
Soluble Solids ◽  
Application Time ◽  
Time Of Application ◽  
Yield And Quality ◽  
Randomized Block Design ◽  
Semi Arid Region ◽  
Fruit Mass

The objective of this study was to evaluate the productivity and quality of melon fruits as a function of the dose and time of application of biostimulant in the conditions of the semi-arid region of Paraíba. The experiment was carried out at the Federal University of Campina Grande, campus of Pombal - PB, Brazil, in a randomized block design in a 4 x 5 split plot scheme, with doses of biostimulant (0; 0.5; 1.0; 1, 5 and 2.0 L ha-1) and in the subset of the biostimulant application times (15; 20; 25 and 30 days before harvest - DAC), in four replications. Characteristics related to fruit production and quality were evaluated. There was no interaction between the factors of dose and application time of the biostimulant in any of the evaluated characteristics. Thus, the highest estimated values of number of fruits per plant, fruit mass and total melon production were obtained with the application of doses ranging from 0.9 to 1.5 L ha-1 and at the time of application it varied from 22,5 to 23.6 DAC. The content of soluble solids increased 5.5% when the biostimulant dose of 2.0 L ha-1 was used and 4.4% when the product was applied 15 days before harvest.

Sign in / Sign up

Export Citation Format

Share Document