scholarly journals Incorporation of disinfectants for obtaining dental stone: microbiological and dimensional evaluation

2015 ◽  
Vol 44 (1) ◽  
pp. 24-30
Author(s):  
Patrícia Lins Azevedo do Nascimento ◽  
Rafael Bezerra Ribeiro ◽  
Cícero Romão Gadê-Neto ◽  
Alexandre Henrique de Moura Dias

AIM: To assess dimensional change and antimicrobial activity of disinfectants substances incorporated during the dental stone manipulation. MATERIAL AND METHOD: In vivo - microorganisms were collected in alginate molds of 30 volunteers inoculated on BHI agar and incubated at 37 °C for 24 hours. The molds were cast with type IV gypsum, manipulated with saline (G1), 1% sodium hypochlorite (G2) and 4% chlorhexidine (G3), replacing the water. After setting of plaster with 1 hour two collections on models were made. After 24 hours, the readings were performed. The Kruskal-Wallis and Wilcoxon tests with confidence interval of 99% and 95% respectively were used. In vitro - Müeller Hinton agar petri dishes were inoculated with S. mutans (ATCC25175), S. sanguis (ATCC10556) and E. faecalis (ATCC29212), over which were placed steel rings filled with the same substances of the in vivo study. After deposition of gypsum and incubation, halos were measured with a digital caliper and data were submitted to ANOVA and Tukey's test with confidence interval of 95%. Dimensional Change - With a metallic matrix and a perfectly adapted tray, the insertion axis and force used for moulding and obtain 30 specimens in type IV gypsum were standardized, following the same distribution of the study groups in vivo. The specimens were measured by Image Pro Plus software and data were submitted to ANOVA and Tukey's test with confidence interval of 95%. RESULT: Data from the in vivo study demonstrated a significant difference between the mold and each model (p<0.001). In the Wilcoxon test there was no significant difference between groups of models. At the in vitro test, G2 showed greater inhibition zones in all micro-organisms tested compared to G3, but with respect to dimensional changes, there was a significant difference between solutions and metallic standard, where G3 caused less change than G2. CONCLUSION: Chlorhexidine 4% showed to be the most suitable disinfectant.

2021 ◽  
Vol 16 (2) ◽  
pp. 19-26
Author(s):  
Leelavathi Muthupalaniappen ◽  
Adawiyah Jamil

This article provides information on allergy testing and serves as a simple guide for physicians who are considering using allergy testing as a step in patient management. Basic principles of allergy testing, indications for testing, and how and when to choose a suitable allergy test are discussed. Allergy testing in general refers to evaluation of either type I or type IV hypersensitivity reactions. The type I (immediate) reaction is evaluated using the skin prick test (in vivo) or serum IgE (in vitro) test methods, while the type IV (delayed) reaction is determined via the skin patch test method. The allergens responsible for a specific reaction can be identified from allergy testing, and this information is useful in administering avoidance measures. Appropriate treatment of allergic reactions along with allergen avoidance ensure a successful treatment outcome and prevent future reactions.


1993 ◽  
Vol 16 (9) ◽  
pp. 653-658 ◽  
Author(s):  
P. Calzavara ◽  
S. De Angeli ◽  
A. Nieri ◽  
C. Furlan ◽  
R. Bolzonella ◽  
...  

A scanning electron microscopy was used after in vitro and in vivo tests to investigate any alterations caused by the peristaltic roller pump in erythrocyte morphology. The electron micrographs of samples were examined as follows: 1) by image analyser; 2) by applying Bessis's classification for the qualitative study of crenated red blood cells (RBCs). The in vitro test was repeated four times using blood from healthy donors. Each basal blood sample was divided into 250 ml portions, each of which was recirculated for 12 minutes at different flow rates. In order to verify any persistent erythrocyte damage caused by the peristaltic pump, 15 minutes after recirculation at 450 ml/min, another sample was prepared using the blood remaining from the last test. A statistically significant direct correlation was found between blood flow (Qb) increase and the percentage of morphologically altered RBCs, when either using an image analyser (r = 0.97; p < 0.05) or Bessis's classification (r = 0.95; p < 0.05). However, neither method showed any statistically significant difference between the percentage of deformed RBCs, determined in the basal sample, or in the percentage found at the end of the 450 ml/min test after standing 15 minutes at room temperature. The in vivo test was carried out on 6 patients over 2 dialysis sessions, which differed only for the Qb: 250 versus 400 ml/min. The two dialysis sessions gave comparable results when using both study methods regarding the presence of deformed RBCs. While Bessis's classification showed a significant drop in the post-dialysis percentage of dysmorphic RBCs compared to the pre-dialysis value, both with a Qb of 250 ml/min and 400 ml/min, no significant change was found with the image analyser. The contradictory results of the two tests can be attributed to the presence of spherocytes and stomatocytes in the in vivo test which on the other hand were absent in the in vitro test and not easily distinguished by the image analyser with the parameter used. Reduction in the number of deformed RBCs after dialysis in the in vivo test can be attributed to improvement in the acidosis, correction of the hydroelectric imbalances and removal of toxic substances as a result of dialysis, thus allowing the echinocytes, spherocytes and stomatocytes to be transformed into discocytes.


2021 ◽  
Vol 43 (6) ◽  
Author(s):  
Luana Sabrine Silva ◽  
Edson Hiydu Mizobutsi ◽  
Regina Cássia Ferreira Ribeiro ◽  
Fernando da Silva Rocha ◽  
Gisele Polete Mizobutsi ◽  
...  

Abstract Mango (Mangifera indica L.) has great socioeconomic importance to Brazil, but its production is affected by anthracnose. Chitosan films have shown potential in controlling this disease. In this study, the effect of the association of chitosan with phenolic compounds and extracts on the Colletotrichum tropicaledevelopment was evaluated. Phenolic compounds and extracts from mango peel were incorporated into 2.0% chitosan solutions and tested in vitro. In the in vivo experiment, after pathogen inoculation and application of treatments, fruits were evaluated for anthracnose incidence and severity. Controls consisted of the application of water or pure culture medium and fungicide imazalil. The experimental design was completely randomized and data were submitted to analysis of variance. In the in vitro test and in the assessment of disease intensity, means were compared using the Scott-Knott and Tukey tests (p <0.05), respectively. Controls were compared to the other treatments using the Dunnett test (p <0.05). Total growth inhibition, conidia production and C. tropicale germination were verified with the incorporation of citric, pyrocatecoic and transcinamic acids to chitosan, with no significant difference between them and the fungicide. Low anthracnose incidence and severity was observed in mangoes treated with chitosan combined with phenolic compounds.


2020 ◽  
Vol 21 (15) ◽  
pp. 1688-1698
Author(s):  
Germeen N.S. Girgis

Purpose: The work was performed to investigate the feasibility of preparing ocular inserts loaded with Poly-ε-Caprolactone (PCL) nanoparticles as a sustained ocular delivery system. Methods: First, Atorvastatin Calcium-Poly-ε-Caprolactone (ATC-PCL) nanoparticles were prepared and characterized. Then, the optimized nanoparticles were loaded within inserts formulated with Methylcellulose (MC) and Polyvinyl Alcohol (PVA) by a solvent casting technique and evaluated physically, for in-vitro drug release profile. Finally, an in-vivo study was performed on the selected formulation to prove non-irritability and sustained ocular anti-inflammatory efficacy compared with free drug-loaded ocuserts. Results: The results revealed (ATC-PCL) nanoparticles prepared with 0.5% pluronic F127 were optimized with 181.72±3.6 nm particle size, 0.12±0.02 (PDI) analysis, -27.4± 0.69 mV zeta potential and 62.41%±4.7% entrapment efficiency. Nanoparticles loaded ocuserts manifested compatibility between drug and formulation polymers. Moreover, formulations complied with average weight 0.055±0.002 to 0.143±0.023 mg, and accepted pH. ATC-PCL nanoparticles loaded inserts prepared by 5% MC showed more sustained, prolonged in-vitro release over 24h. In-vivo study emphasized non-irritability, ocular anti-inflammatory effectiveness represented by smaller lid closure scores, and statistically significant lowering in PMN count after 3h. Conclusion: These findings proposed a possibly simple, new and affordable price technique to prepare promising (ATC-PCL) nanoparticles loaded inserts to achieve sustained release with prolonged antiinflammatory efficacy.


2017 ◽  
Vol 5 (2) ◽  
pp. 1
Author(s):  
Mulyati Mulyati ◽  
Suryati Suryati ◽  
Irfani Baga

The study aims to isolate, characterize, and examine probiotic bacteria's inhibitory ability against Vibrio harveyi bacteria, both in-vitro and in vivo. Methods used in the study consist of 1) An Isolation of Candidate Probiotic Bacteria, 2) An Antagonistic Test of Candidate Probiotic Bacteria in vitro, 3) An Identification of Bacteria, 4) A Pathogenicity Test of Candidate Probiotic Bacteria, 5) An Antagonistic Test of Candidate Probiotic Bacteria against V. harveyi in vivo. According to the isolation of candidate probiotic bacteria, there are 18 isolated candidate probiotic. After being tested for its inhibitory ability in vitro, there are 8 isolates with zone of inhibition as follows: isolate MM 7 from intestine (22 mm), isolate MM 6 from intestine (12 mm), isolate MM 10 from sea water (10 mm), isolate MM 5 from intestine (9 mm), isolate MM 4 from intestine (8 mm), isolate MM 3 from intestine (7 mm), isolate MM 2.2 from intestine (7 mm), isolate MM 2.1 from intestine (7 mm). Eight genera of the candidate probiotic bacteria is derived from Portunid crab, they are Staphylococcus, Streptococcus, bacillus, vibrio, Alcaligenes, Lactobacillus, micrococcus. Before proceeding the V. harveyi bacterial challenge test in vivo, three potential isolates consisting of MM6, MM7 and MM10 as the probiotic bacteria are pathogenicity-tested against V. harveyi. The survival rate of Portunid crab on pathogenicity test using MM6, MM7 and MM10 generates 91.11-100%, while the control generates 100% survival rate. Variance analysis result through post-hoc Tukey's Honest Significant Difference (HSD) test at 95% confidence interval indicates that isolate MM7 and MM10 are significantly able to increase hatchling Portunid crab's survival rate.


2019 ◽  
Vol 120 (6) ◽  
pp. 9747-9757 ◽  
Author(s):  
Jiayou Tang ◽  
Linhe Lu ◽  
Yang Liu ◽  
Jipeng Ma ◽  
Lifang Yang ◽  
...  

1996 ◽  
Vol 24 (3) ◽  
pp. 325-331
Author(s):  
Iain F. H. Purchase

The title of this paper is challenging, because the question of how in vitro methods and results contribute to human health risk assessment is rarely considered. The process of risk assessment usually begins with hazard assessment, which provides a description of the inherent toxicological properties of the chemical. The next step is to assess the relevance of this to humans, i.e. the human hazard assessment. Finally, information on exposure is examined, and risk can then be assessed. In vitro methods have a limited, but important, role to play in risk assessment. The results can be used for classification and labelling; these are methods of controlling exposure, analogous to risk assessment, but without considering exposure. The Ames Salmonella test is the only in vitro method which is incorporated into regulations and used widely. Data from this test can, at best, lead to classification of a chemical with regard to genotoxicity, but cannot be used for classification and labelling on their own. Several in vitro test systems which assess the topical irritancy and corrosivity of chemicals have been reasonably well validated, and the results from these tests can be used for classification. The future development of in vitro methods is likely to be slow, as it depends on the development of new concepts and ideas. The in vivo methods which currently have reasonably developed in vitro alternatives will be the easiest to replace. The remaining in vivo methods, which provide toxicological information from repeated chronic dosing, with varied endpoints and by mechanisms which are not understood, will be more difficult to replace.


Sign in / Sign up

Export Citation Format

Share Document