scholarly journals Biodegradability assessment of starch/glycerol foam and poly(butylene adipate-co-terephthalate)/starch film by respirometric tests

2020 ◽  
Vol 23 ◽  
Author(s):  
Ivan Taiatele Junior ◽  
Tatiane Cristina Dal Bosco ◽  
Janksyn Bertozzi ◽  
Roger Nabeyama Michels ◽  
Suzana Mali

Abstract The objectives of this work were to determine the biodegradability of starch/glycerol foam and of poly(butylene-adipate-co-terephthalate) (PBAT)/starch film using respirometric methods and also to compare these results with conventional polymers – expanded polystyrene and low-density polyethylene. A matured organic compost was utilized as inoculum and sucrose was used as positive reference material. Biodegradation efficiencies (BE) after 47 days were: 35% for sucrose; 34% for starch/glycerol; and 38% for PBAT/starch. Starch/glycerol and PBAT/starch presented BE statistically equal to sucrose, whilst both the conventional packaging used were not degraded (p> 0.05). Infrared spectroscopy and thermogravimetric analyses showed that the microbiota rather degraded the starch over the PBAT in the PBAT/starch blend, and also that some starch remained intact in the internal polymeric matrix. This study verified that starch/glycerol foam and PBAT/starch film are highly biodegradable materials and may then be used to enhance the biodegradability of some products such as disposable trays and supermarket bags.

2016 ◽  
Vol 869 ◽  
pp. 326-330
Author(s):  
Julia R. Guedes ◽  
Wagner Martins Florentino ◽  
Luciano Monteiro Rodrigues ◽  
Claudinei dos Santos ◽  
Daniella Regina Mulinari

In the work, mechanical properties of palm fibers/low density polyethylene (LDPE) composites were studied. These fibers were mixed with the polymeric matrix (LDPE) in a thermokinetic mixer, in which fibers were responsible for 5 to 20 wt% in the composition. After the mixture, composites were dried, ground in mill and placed in an injector camera according to ASTM D-638 and ASTM D-790 specifications. Specimens were tested in tensile, impact, flexural and Shore A hardness mode. Results showed the addition fibers in polymeric matrix presented increase mechanical properties when compared to pure polymer


Sign in / Sign up

Export Citation Format

Share Document