scholarly journals Tectonics and paleogeography of the Marajó Basin, northern Brazil

2002 ◽  
Vol 74 (3) ◽  
pp. 519-531 ◽  
Author(s):  
JOÃO B. S. COSTA ◽  
YOCITERU HASUI ◽  
RUTH L. BEMERGUY ◽  
ADILSON V. SOARES-JÚNIOR ◽  
JAVIER M. C. VILLEGAS
Keyword(s):  
Strike Slip ◽  
Normal Faults ◽  
Equatorial Atlantic ◽  
Slip Regime ◽  
Basin Geometry ◽  
Weakness Zones ◽  
Marajó Island ◽  
Marine Influence ◽  
Western Side ◽  
Orogenic Belts

The Marajó Basin area presents geologic and geomorphologic features chiefly due to the Mesozoic extension and post-Miocene neotectonics. The extension event with an Early and a Late Cretaceous phases originated four sub-basins that constitutes the Marajó Basin, with a thick continental clastic sequence showing marine influence. NW and NNW normal faults and NE and ENE strike-slip faults controlled the basin geometry. The extension, related to the Equatorial Atlantic opening, propagated into the continent along crustal weakness zones of the Precambrian Tumucumaque, Amapá and Araguaia orogenic belts. The neotectonic event is a strike-slip regime which developed transtensional basins filled in by Upper Tertiary shallow marine (Pirabas Formation) and transitional sequences (Barreiras Group), followed by Quaternary fluvial deposits and transitional sequences derived from the Amazon and Tocantins rivers and the Marajoara estuary. The current landscape has a typical estuarine morphology. The coast morphology presents sea-cliffs on transitional Upper Tertiary sequences, while inwards dominate hills sustained by Mid-Pleistocene lateritic crust, with a flat erosive surface at 70 m. In the eastern Marajó Island several generations of paleochannels associated with fluvial-estuarine sequences are recognized, while a fluvial-marine plain is widespread on its western side.

Rampart seismic zone of central Alaska

1983 ◽  
Vol 73 (3) ◽  
pp. 813-829
Author(s):  
P. Yi-Fa Huang ◽  
N. N. Biswas
Keyword(s):  
Main Shock ◽  
Fault Plane ◽  
B Value ◽  
Aftershock Sequence ◽  
Strike Slip ◽  
Lithospheric Plate ◽  
Normal Faults ◽  
Seismic Zone ◽  
The West ◽  
Fault Plane Solutions

abstract This paper describes the characteristics of the Rampart seismic zone by means of the aftershock sequence of the Rampart earthquake (ML = 6.8) which occurred in central Alaska on 29 October 1968. The magnitudes of the aftershocks ranged from about 1.6 to 4.4 which yielded a b value of 0.96 ± 0.09. The locations of the aftershocks outline a NNE-SSW trending aftershock zone about 50 km long which coincides with the offset of the Kaltag fault from the Victoria Creek fault. The rupture zone dips steeply (≈80°) to the west and extends from the surface to a depth of about 10 km. Fault plane solutions for a group of selected aftershocks, which occurred over a period of 22 days after the main shock, show simultaneous occurrences of strike-slip and normal faults. A comparison of the trends in seismicity between the neighboring areas shows that the Rampart seismic zone lies outside the area of underthrusting of the lithospheric plate in southcentral and central Alaska. The seismic zone outlined by the aftershock sequence appears to represent the formation of an intraplate fracture caused by regional northwest compression.

Late Pleistocene extension and strike-slip in the Dead Sea Basin

2004 ◽  
Vol 141 (5) ◽  
pp. 565-572 ◽  
Author(s):  
YUVAL BARTOV ◽  
AMIR SAGY
Keyword(s):  
Internal Structure ◽  
Slip Rate ◽  
Dead Sea ◽  
Strike Slip ◽  
Normal Faults ◽  
Small Scale ◽  
Dead Sea Basin ◽  
Pull Apart Basin ◽  
Western Border ◽  
The Dead

A newly discovered active small-scale pull-apart (Mor structure), located in the western part of the Dead Sea Basin, shows recent basin-parallel extension and strike-slip faulting, and offers a rare view of pull-apart internal structure. The Mor structure is bounded by N–S-trending strike-slip faults, and cross-cut by low-angle, E–W-trending normal faults. The geometry of this pull-apart suggests that displacement between the two stepped N–S strike-slip faults of the Mor structure is transferred by the extension associated with the normal faults. The continuing deformation in this structure is evident by the observation of at least three deformation episodes between 50 ka and present. The calculated sinistral slip-rate is 3.5 mm/yr over the last 30 000 years. This slip rate indicates that the Mor structure overlies the currently most active strike-slip fault within the western border of the Dead Sea pull-apart. The Mor structure is an example of a small pull-apart basin developed within a larger pull-apart. This type of hierarchy in pull-apart structures is an indication for their ongoing evolution.

Miocene to Messinian deformation and hydrothermal activity in a pre-Alpine basement massif of the French western Alps: new U-Th-Pb and argon ages from the Lauzière massif

2010 ◽  
Vol 181 (3) ◽  
pp. 227-241 ◽  
Author(s):  
Dominique Gasquet ◽  
Jean-Michel Bertrand ◽  
Jean-Louis Paquette ◽  
Jérémie Lehmann ◽  
Gueorgui Ratzov ◽  
...  
Keyword(s):  
Late Miocene ◽  
Shear Zones ◽  
Hydrothermal Activity ◽  
Western Alps ◽  
Strike Slip ◽  
Quartz Veins ◽  
The North ◽  
Slip Regime ◽  
Tectonically Active ◽  
Dextral Strike Slip

Abstract U-Pb and Th-Pb dating of monazite from hydrothermal quartz veins (“Alpine veins”) from the Lauzière massif (North Belledonne) together with Ar/Ar ages of adularias from the same veins constrain the age of the last tectono-metamorphic events that affected the External Crystalline Massifs (ECM). Ages obtained are surprisingly young. The study of the structural context of the veins combined with our chronological data, allow us to propose a tectonic scenario of the northern ECM for the 15-5 Ma period, which was poorly documented so far. The quartz veins are of two types: (i) the oldest are poorly mineralized (chlorite and epidote), flat-lying veins. The quartz fibres (= extension direction) are near vertical and seem to be associated with a subvertical dissolution schistosity superimposed upon an early Alpine deformation underlined by “mini-biotite”. They bear a sub-horizontal stretching lineation; (ii) the youngest veins are very rich in various minerals (anatase, rutile, phénacite, meneghinite, beryl, synchysite, ….). They are almost vertical. Their “en echelon” geometry as well as the horizontal attitude of their quartz fibres show a dextral strike-slip regime. Two groups of Th-Pb ages have been obtained: 11 to 10 Ma and 7 to 5 Ma. They were obtained from the most recent veins (vertical veins) sampled in different areas of the massif. The ca. 10 Ma ages are related to veins in the Lauzière granite and its metamorphic country-rocks at about 2 km from the eastern contact of the massif, while the ages of ca. 5 Ma correspond to veins occurring in mylonites along this contact. Adularias provided Ar/Ar ages at ca. 7 Ma. By contrast, a monazite from a vein of the Pelvoux massif (Plan du Lac) yielded a Th-Pb age of 17.6 Ma but in a different structural setting. Except fission track ages, there are very little ages of this range published in the recent literature on the Alps. The latter concern always gold mineralized veins (NE Mont Blanc and SW Lepontine dome). The last compressive tectonic regime dated between 15 and 12 Ma is coeval with (i) the late “Roselend thrust” event, which is recorded in the Mont Blanc by shear-zones with vertical lineation, (ii) the last movements in the basal mylonites of the Swiss Nappes, (iii) the horizontal Alpine veins from the Mont Blanc and Belledonne massifs (with vertical quartz fibres), which are similar to the early veins of the Lauzière. On the contrary, the vertical veins of the Lauzière, dated between 11 and 5 Ma, correspond to a dextral strike slip regime. This suggests that most of the strike-slip tectonics along the ECM took place during two stages (ca. 10 Ma and ca. 7-5 Ma) and not only at 18 Ma as had been proposed previously. Our ages are consistent with the late Miocene-Pliocene overlap of the Digne thrust to the South and to part of the normal movement along the Simplon fault to the North. Thus, all the external crystalline massifs were tectonically active during the late Miocene. This suggests that tectonic events in the external alpine belt may have contributed to some extent to the geodynamical causes of the Messinian crisis.

Structural framework and the timing of landscape-forming faults - a study from Western Norway

2021 ◽  
Author(s):  
Åse Hestnes ◽  
Deta Gasser ◽  
Thomas Scheiber ◽  
Joachim Jacobs ◽  
Anna K. Ksienzyk ◽  
...  
Keyword(s):  
Field Measurements ◽  
Strike Slip ◽  
Clear Correlation ◽  
Late Mesozoic ◽  
The North ◽  
Slip Regime ◽  
Structural Framework ◽  
Western Norway ◽  
Comprehensive Picture ◽  
Fault Gouge Dating

<p>Brittle fracture and fault networks control the location of topographic features such as valleys and ridges and active faulting can lead to topographic rejuvenation. In Western Norway, however, it is debated how much faulting has contributed to rejuvenating of the topography during the late Mesozoic and Cenozoic. Geometric and temporal constraints on the brittle evolution are therefore important to obtain a comprehensive picture of the post-Caledonian topographic evolution of this region. In this study, we combine remote sensing, structural field measurements, paleo-stress analysis and isotopic dating to study the brittle evolution of a larger region of Western Norway. The region spans from the Sognefjord in the south to the Møre margin in the north. Lineament studies reveal important lineament sets trending N-S, NE-SW, E-W and NW-SE. Field observations show that these lineament sets correspond to both dip-slip and strike-slip faults, some of them parallel to ductile precursor structures and some cutting the ductile fabric. Epidote, chlorite, quartz and zeolite are the dominant mineralizations on fracture and fault surfaces. There is no clear correlation between the type of mineralization and fracture orientation in the region. Paleostress analysis on fault-slip data (n = 173), including faults reactivating older structures, show a good fit with a general E-W extensional regime. However, a considerable amount of faults (n = 115) formed under a strike-slip regime, which has so far not been documented in the region. We combine these findings with K-Ar fault gouge dating from six faults where five fractions (6-10 µm, 2-6 µm, 0.4-2 µm, 0.1-0.4 µm, <0.1µm) from each sample were analysed. These faults represent two of the four fracture sets observed, trending N-S and NE-SW, respectively, and show either strike-slip or dip-slip kinematics. XRD-data from these gouges show that K-feldspar and smectite are the main sources of potassium. The ages show a spread from the Triassic to the Cretaceous, where older ages can be affected by K-feldspar inherited from the host rock. Our results point to an important phase of Mesozoic strike-slip faulting in the region, with steep faults controlling the location of several major valleys. Extensional dip-slip faults might have contributed to the rejuvenation of the footwall topography.</p>

scholarly journals Cenozoic tectonic model of the Bohai Bay Basin in China

2016 ◽  
Vol 153 (5-6) ◽  
pp. 866-886 ◽  
Author(s):  
FUSHENG YU ◽  
HEMIN KOYI
Keyword(s):  
Data Interpretation ◽  
Strike Slip ◽  
Normal Faults ◽  
Bohai Bay ◽  
Bohai Bay Basin ◽  
Basin Inversion ◽  
Tectonic Model ◽  
Early Oligocene ◽  
Anticlockwise Rotation ◽  
Partial Inversion

AbstractModelling results and seismic interpretation illustrate that the Cenozoic evolution of the Bohai Bay Basin (BBB) can be divided into different stages. A transtensional phase during Paleocene – early Oligocene time created NE-trending strike-slip faults and E–W-trending normal faults which were driven roughly by N–S–extension, making an angle of 25° with the strike-slip faults. Seismic data interpretation yields evidence that inversion phases occurred within the NE Xialiaohe Depression of the greater Bohai Bay Basin. This inversion phase is attributed to rotation and partial inversion that occurred during late Oligocene time, leading to formation of inversion structures along the NE part of Tanlu Fault. This episode is attributed to an anticlockwise rotation of the eastern part of the BBB driven by the convergence between the Pacific and Eurasian plates. The tectonic scenario described was simulated in scaled analogue models, which were extended by pulling two basement plates away from each other. Partial inversion was simulated by rotation of one of the plates relative to the other. Model results show many of the features observed in the BBB. Our model results are used to argue that, unlike the two-episode extension and whole-basin inversion models previously proposed for the BBB, a single N–S-aligned extension followed by anticlockwise rotation accounts for the Cenozoic evolution of the BBB and produces some of the structural complexities observed in the basin.

Quantifying fault reactivation risk in the western Gippsland Basin using geomechanical modelling

2013 ◽  
Vol 53 (1) ◽  
pp. 255 ◽  
Author(s):  
Ernest Swierczek ◽  
Cui Zhen-dong ◽  
Simon Holford ◽  
Guillaume Backe ◽  
Rosalind King ◽  
...  
Keyword(s):  
Structural Model ◽  
Strike Slip ◽  
Fault Reactivation ◽  
Fault System ◽  
Co2 Injection ◽  
Normal Faults ◽  
Surface Geometry ◽  
Northern Margin ◽  
Fault Surface ◽  
Gippsland Basin

The Rosedale Fault System (RFS) bounds the northern margin of the Gippsland Basin on the Southern Australian Margin. It comprises an anastomosing system of large, Cretaceous-age normal faults that have been variably reactivated during mid Eocene-Recent inversion. A number of large oil and gas fields are located in anticlinal traps associated with the RFS, and in the future these fields may be considered as potential storage sites for captured CO2. Given the evidence for geologically recent fault reactivation along the RFS, it is thus necessary to evaluate the potential impacts of CO2 injection on fault stability. The analysis and interpretation of 3D seismic data allowed the authors to create a detailed structural model of the western section of the RFS. Petroleum geomechanical data indicates that the in-situ stress in this region is characterised by hybrid strike-slip to reverse faulting conditions where SHmax (40.5 MPa/km) > SV (21 MPa/km) ~ Shmin (20 MPa/km). The authors performed geomechanical modelling to assess the likelihood of fault reactivation assuming that both strike-slip and reverse-stress faulting regimes exist in the study area. The authors’ results indicate that the northwest to southeast and east-northeast to west-southwest trending segments of the RFS are presently at moderate and high risks of reactivation. The authors’ results highlight the importance of fault surface geometry in influencing fault reactivation potential, and show that detailed structural models of potential storage sites must be developed to aid risk assessments before injection of CO2.

The Eastern Romanche ridge-transform intersection (Equatorial Atlantic): slow spreading under extreme low mantle temperatures. Preliminary results of the SMARTIES cruise.

2020 ◽  
Author(s):  
Marcia Maia ◽  
Daniele Brunelli ◽  
Keyword(s):  
Thick Layer ◽  
Tectonic Activity ◽  
Normal Faults ◽  
Transform Fault ◽  
Equatorial Atlantic ◽  
Ridge Axis ◽  
Nodal Basin ◽  
Spreading Axis ◽  
Geophysical Surveys ◽  
Damaged Zone

<p>A strong edge effect is predicted at the intersections between long-offset transforms and mid ocean ridge segments. The Equatorial Atlantic hosts several megatransforms, where the connections of potentially low mantle temperatures due to the large lithospheric age contrast with melt production are poorly understood. The SMARTIES cruise focused on the Romanche transform that offsets the Mid Atlantic Ridge (MAR) laterally by 900 km with an age offset of 55 Ma. The eastern Ridge-Transform Intersection (RTI) markedly shows the effects of the lateral cooling of the ridge segment. To better understand the thermal regime at these complex domains, we acquired surface geophysical data and bathymetry of the area, and geological observations and sampling during 25 HOV Nautile dives. The integrated study of rock characteristics and of geophysical surveys allows tackling the connections between magmatism and tectonics. A network of 19 OBS was also deployed to study the seismic activity during the cruise in collaboration with the ILAB project.</p><p>There is a striking change in deformation patterns along the ridge axis moving away from the transform southwards. The bathymetry is extremely complex, with several structural directions, partly resulting from transtension. A low melt supply is focused at the ridge axis resulting in a long oblique axial domain, that forms a relay zone between the roughly north-south ridge axis in the south and the area close to the transform fault, while the transform fault domain is highly complex. Trends oblique to both the main spreading axis direction and the transform fault direction are widespread. A clear Principal Transform Displacement Zone (PTDZ) can be followed as a long, near continuous alignment, on the seafloor of the wide Romanche valley. However, the valley morphology suggests a migration of the PTDZ and intense deformation within the transform domain. The RTI is complex and the position of the spreading axis clearly evolved with time, through at least two and possibly three eastward ridge jumps.</p><p>Six Nautile dives explored the northern wall of the Romanche, the damaged zone of the transform fault, and the exceptionally deep nodal basin. The north wall exposes a very thick basalt unit covered with a thick layer of sediments. Eight dives explored the southern flank of the Romanche identifying fragments of old Oceanic Core Complexes (OCCs) formed by highly deformed peridotites, and a large OCC located at the RTI that exposes mylonitized peridotites and is dissected by several normal faults. The magmatic zones of the axial domain (nine dives) are formed by volcanic ridges affected by important tectonic activity. The dives show pillow and tube volcanic flows with intersecting faults. An oblique elongated faulted and sedimented ridge (2 dives) parallel to the oblique relay zone was shown to be of peridotitic nature Recent faults have been observed, as well as traces of high-T hydrothermal activity consistent with black-smoker type venting, recently overprinted by low temperature diffuse venting related to active faulting.</p>

Seismic and geodetic response to crustal deformation in Krísuvík volcanic system, southwest Iceland

2020 ◽  
Author(s):  
Revathy M. Parameswaran ◽  
Ingi Th. Bjarnason ◽  
Freysteinn Sigmundsson
Keyword(s):  
Stress Field ◽  
Crustal Deformation ◽  
High Energy ◽  
Strike Slip ◽  
Normal Faults ◽  
Seismic Zone ◽  
The South ◽  
The West ◽  
Volcanic System ◽  
Geothermal Activity

<p>The Reykjanes Peninsula (RP) is a transtensional plate boundary in southwest Iceland that marks the transition of the Mid-Atlantic Ridge (MAR) from the offshore divergent Reykjanes Ridge (RR) in the west to the South Iceland Seismic Zone (SISZ) in the east. The seismicity here trends ~N80°E in central RP and bends to ~N45°E at its western tip as it joins RR. Seismic surveys, geodetic studies, and recent GPS-based kinematic models indicate that the seismic zone is a collection of strike-slip and normal faults (e.g., Keiding et al., 2008). Meanwhile, the tectonic processes in the region also manifest as NE-SW trending volcanic fissures and normal faults, and N-S oriented dextral faults (e.g., Clifton and Kattenhorn, 2006). The largest of these fissure and normal-fault systems in RP is the Krísuvík-Trölladyngja volcanic system, which is a high-energy geothermal zone. The seismicity here predominantly manifests RP’s transtentional tectonics; however, also hosts triggered events such as those following the 17 June 2000 Mw6.5 earthquake in the SISZ (Árnadottir et al., 2004) ~80 km east of Krísuvík. Stress inversions of microearthquakes from 1997-2006 in the RP indicate that the current stress state is mostly strike-slip with increased normal component to the west, indicating that the seismicity is driven by plate diverging motion (Keiding et al., 2009). However, the geothermal system in Krísuvík is a potential secondary source for triggered seismicity and deformation. This study uses seismic and geodetic data to evaluate the activity in the Krísuvík-Trölladyngja volcanic system. The seismic data is used to identify specific areas of focused activity and evaluate variations in the stress field associated with plate motion and/or geothermal activity over space and time. The data used, within the time period 2007-2016, was collected by the the South Icelandic Lowland (SIL) seismic network operated and managed by the Iceland Meterological Office (IMO). Furthermore, variations in seismicity are compared to crustal deformation observed with TerraSAR-X images from 2009-2019. Crustal changes in the Krísuvík area are quantified to develop a model for corresponding deformation sources. These changes are then correlated with the stress-field variations determined with seismic analysis.</p>

Inversion tectonics, intracontinental fold-and-thrust belts and complex stress fields in central Europe: the history of the Franconian Basin revealed by paleostress analysis, geological maps and field observations.

2020 ◽  
Author(s):  
Saskia Köhler ◽  
Florian Duschl ◽  
Hamed Fazlikhani ◽  
Daniel Köhn
Keyword(s):  
Stress Field ◽  
Late Cretaceous ◽  
Complex Stress ◽  
Strike Slip ◽  
Stress Fields ◽  
Thrust Belt ◽  
Slip Regime ◽  
Geological Maps ◽  
Fold And Thrust Belt ◽  
Paleostress Analysis

<p>The Franconian Basin in SE Germany has seen a complex stress history indicative of several extensional and compressional phases e.g. the Iberia-Europe collision acting on a pre-faulted Variscan basement. Early Cretaceous extension is followed by Late Cretaceous inversion with syntectonic sedimentation and deformation increasing progressively from SW to NE culminating in the Franconian Line where basement rocks are thrusted over the Mesozoic cover. The development of this intracontinental fold-and-thrust belt is followed by Paleogene extension associated with the formation of the Eger Graben, which is then succeeded by a new compressional event as a consequence of the Alpine orogeny.</p><p>We use existing data from literature and geological maps and new field data to construct balanced cross-sections in order to reveal the architecture of the Cretaceous fold-and-thrust belt. In addition, we undertake paleostress analysis using a combination of fault slip information, veins and tectonic and sedimentary stylolites to identify stress events in the study area, as well as their nature and timing. Furthermore, we try to understand how basement faults influence younger faults in the cover sequence.</p><p>Our paleostress data indicates that at least five different stress events existed in Mesozoic to Cenozoic times (from old to young): (1) an N-S directed extensional stress field with E-W striking normal faults, (2) a NNE-SSW directed compressional stress field causing thrusting and folding of the cover sequence, (3) a strike slip regime with NE-SW compression and NW-SE extension, (4) an extensional event with NW-SE extension and the formation of ENE-WSW striking faults according to the formation of the Eger Graben in the E, and finally (5) a strike slip regime with NW-SE compression and NE-SW extension related to Alpine stresses. The geometry of faulting and deformation varies significantly over the regions with respect to the influence of and distance to inherited Variscan structures.</p><p>We argue that the extensional event of stress field (1) provides spacing for Early Cretaceous sedimentation in the Franconian Basin. This is followed by the creation of an intracontinental fold-and-thrust belt during stress fields (2) and (3) with a slight rotation of the main compressive stress during these events in Late Cretaceous. We associate the following extension to the development of the Eger Graben in Miocene time. Finally, a NW-SE directed compression related to Alpine stresses in an intracontinental strike-slip regime is following. Reconstruction of the Cretaceous fold-and-thrust belt reveals mainly fault propagation folding with deep detachments sitting below the cover sequence indicating thick-skinned tectonics. We argue that the Franconian Line is a thrust with a steeply dipping root that belongs to the same fold-and-thrust belt.</p>

Sign in / Sign up

Export Citation Format

Share Document