scholarly journals Influence of apical enlargement in cleaning and extrusion in canals with mild and moderate curvatures

2011 ◽  
Vol 22 (3) ◽  
pp. 212-217 ◽  
Author(s):  
Mauricia Ferreira de Almeida e Borges ◽  
Carlos Eduardo Saraiva Miranda ◽  
Silvio Rocha Corrêa da Silva ◽  
Melissa Marchesan
Keyword(s):  
Optical Microscopy ◽  
Cross Sections ◽  
Histological Analysis ◽  
The Other ◽  
Apical Region ◽  
Surgical Instrument ◽  
Root Canals ◽  
Root Curvature ◽  
Liquid Evaporation

Optical microscopy and morphometric analysis were used in this study to evaluate, in vitro, the cleaning of the apical region in root canals with mild or moderate curvatures subjected to biomechanical preparation with a rotary system, as well as to assess the amount of extruded material to the periapical area. Lateral incisors (n = 32), 16 with curvature angles smaller or equal to 10º (GI) and 16 between 11º and 25º angles (GII) were submitted to Hero 642 rotary instrumentation with different surgical diameters: (A) 30.02 and (B) 45.02. Irrigation was performed at each change of instrument with 5 mL of ultrapure Milli-Q water and the extruded material through the apical foramen was collected. Root cross-sections were subjected to histological analysis by optical microscopy (×40) and the images were evaluated morphometrically using the Image Tool software. Quantification of the extruded material was performed by weighing after liquid evaporation. ANOVA showed no statistically significant differences (p>0.05) among the groups with respect to the procedures used to clean the apical region. Considering the amount of extruded material, the Tukey's HSD showed that canals with mild curvature prepared with the 45.02 surgical diameter showed significantly higher values (p<0.05) that those of the other groups, which were similar between themselves (p>0.05). In conclusion, the effect of cleaning the apical region did not differ in the groups, considering root curvature and the surgical diameter of instruments used for apical preparation. The amount of extruded material was greater in canals with mild curvature that were prepared with the 45.02 surgical instrument diameter.

scholarly journals "In vitro" evaluation of the apical sealing of root canals obturated with different techniques

2003 ◽  
Vol 11 (3) ◽  
pp. 181-185 ◽  
Author(s):  
Viviane Haiub Brosco ◽  
Norberti Bernardineli ◽  
Ivaldo Gomes de Moraes
Keyword(s):  
Continuous Wave ◽  
The Other ◽  
Blue Dye ◽  
Methylene Blue Dye ◽  
Root Canals ◽  
Gutta Percha ◽  
Sealing Ability ◽  
Better Than ◽  
Positive Controls

The purpose of this study was to compare the apical sealing of root canals obturated with different techniques. One hundred-six human mandibular incisors were submitted to instrumentation by means of the step-back technique. After instrumentation, one hundred teeth received an impermeable coating on the external surfaces of the crown and root (except for the area nearby the apical foramen). Afterwards, they were divided in five groups containing twenty elements each, according to the obturation technique employed: 1. lateral condensation with Kerr file; 2. continuous wave of condensation technique with System B; 3. thermoplasticized injectable gutta-percha technique with the Ultrafil system; 4. mechanically thermoplasticized gutta-percha with the JS Quick-Fill system and 5. thermoplasticized gutta-percha associated to a master cone with the Microseal system. The six remaining teeth were employed as negative and positive controls. After obturation, the access cavities were sealed and the teeth were immersed in aqueous 2% methylene blue dye for 72 hours at 37ºC. After that, the teeth were longitudinally sectioned and the apical microleakage was evaluated in a stereomicroscope. The Microseal system presented the best apical sealing ability, followed by System B, JS Quick-Fill, Ultrafil and the lateral condensation technique. The statistical analysis of the results demonstrated that: 1. the Microseal system presented an apical sealing similar to System B and better than the other groups; 2. System B presented better apical sealing than the lateral condensation technique, being similar to the other groups; and 3. the lateral condensation, Ultrafil and JS Quick-Fill groups demonstrated similar sealing ability.

scholarly journals Micropropagation of Mini Orchid Hybrid Phalaenopsis “Sogo Vivien”

2016 ◽  
Vol 1 (1) ◽  
pp. 45 ◽  
Author(s):  
Exsyupransia Mursyanti ◽  
Aziz Purwantoro ◽  
Sukarti Moeljopawiro ◽  
Endang Semiarti
Keyword(s):  
Cell Shape ◽  
Histological Analysis ◽  
The Other ◽  
Mass Propagation ◽  
Flower Stalk ◽  
Shoot Segment ◽  
Plant Body ◽  
Pot Plant ◽  
Variegated Plant

Phalaenopsis “Sogo Vivien” is an orchid hybrid with mini size plant body, and exhibits numerous beautiful pink flowers, that is ideal as ornamental pot plant. Some plants of this orchid exhibit variegated leaves that improve the beauty of the plant, not only because of the flower but also as attracted leaves. This orchid has high economical value, but mass propagation of this orchid has not established yet. An effective method to propagate both the normal and variegated plants is worth to be generated. The objective of this research was to produce a large number of P. “Sogo Vivien” plants, including the variegated plants. The method used seeds from self pollinating variegated plant, and flower stalk nodes. The seeds were sown on three various medium: VW, NP and MS, and flower stalk nodes were planted on VW + BA 10 mg l-1 + active carbon. The results showed that the best medium for in vitro culture of P. “Sogo Vivien” was NP medium, in which all seeds could grew into plantlets. Most plantlets emerged from the seeds were non variegated, only one plantlet out of 1344 seeds was variegated (0.007%). Although all emerged plantlets from flower stalk exhibited variegated leaves. Particularly, the plantlets arised from the second and third basal nodes of flower stalk showed the highest growth rate than that from the other nodes. Histological analysis showed that at 11-13 days after shoot segment plantation on NP medium, the shape of apical cells in the nodes was changed, then followed by the change of cell shape in the basal part of the nodes, produced bipolar pattern, then gradually developed into shoot. These results suggest that mass propagation could be achieved using seed culture, but to get the variegated phenotypes, the second and third nodes of flower stalk from variegated plant were the best explants to be used.

scholarly journals Volumetric Assessment of Root Canal Obturation Using 3% Nano-Chitosan Versus Zinc Oxide Eugenol (ZOE) and Iodoform-Calcium Hydroxide (Metapex), in Primary Root Canals Shaped with Rotary Versus Manual Methods: A Preliminary In-Vitro Spiral CT Study

2019 ◽  
Author(s):  
Elahe Babashahi ◽  
Maryam Mohmadi Kartalaie ◽  
Leila Basir ◽  
Vahid Rakhshan4
Keyword(s):  
Zinc Oxide ◽  
Calcium Hydroxide ◽  
Primary Root ◽  
In Vitro Study ◽  
The Other ◽  
Root Canals ◽  
Zinc Oxide Eugenol ◽  
Volumetric Assessment ◽  
The Difference

Objectives: In this study, chitosan was introduced and used as a substitute for pulpectomy obturation against conventional materials: zinc oxide eugenol (ZOE) and iodoform-calcium hydroxide (Ca(OH)2) compounds. Also, efficacies of rotary versus manual instrumentations were compared. Materials and Methods: This preliminary in-vitro study was performed on 152 intact non-resorbed root canals of primary molars divided into rotary (n=78) versus hand-instrumentation (n=74) and also into ZOE (n=53), iodoform-Ca(OH)2 (n=50), and 3% nano-chitosan (n=49). Canals were cleaned/shaped using hand or rotary files. Canal spaces were measured using spiral computed tomography (CT). Canals were then obturated using the three materials. The percentages of obturation volume (POV) were estimated. Rotary and manual instrumentations were compared in terms of canal spaces before and after obturation. Three obturation materials were compared in terms of canal spaces after obturation (α=0.05). Results: Average POVs of materials were 96.54% (ZOE), 97.87% (Metapex), and 74.74% (nano-chitosan; P=0.000). POV of chitosan differed from the other two (P=0.000) but the other two were similar (P=0.896). Average POVs were 91.46% (manual) and 88.51% (rotary); the difference was not significant (P=0.322). Pre-obturation spaces of canals for different methods were 3.89 mm3 (manual) and 3.26 mm3 (rotary); the difference was significant (P=0.013). Two-way ANCOVA showed a significant effect of materials (P=0.000) but not root length (P=0.585) or shaping methods (P=0.362) on POVs. Conclusions: Nano-chitosan showed a considerable success rate but it still needs reformulation as it was weaker than the extremely successful commercial competitors. Rotary instrumentation can provide results similar to hand-filing in terms of POV although it might yield smaller canals.

scholarly journals Effectiveness of different final irrigation protocols in removing debris in flattened root canals

2009 ◽  
Vol 20 (3) ◽  
pp. 211-214 ◽  
Author(s):  
Michele Regina Nadalin ◽  
Danyel Elias da Cruz Perez ◽  
Luiz Pascoal Vansan ◽  
Cristina Paschoala ◽  
Manoel Damião Souza-Neto ◽  
...  
Keyword(s):  
Cross Sections ◽  
Control Group ◽  
Water Control ◽  
Group V ◽  
Group Iii ◽  
Root Canals ◽  
Group I ◽  
Significant Difference ◽  
Histological Processing

This study evaluated in vitro the capacity of debris removal from the apical third of flattened root canals, using different final irrigation protocols. Thirty human mandibular central incisors with a mesiodistal flattened root were prepared using rotary instrumentation by Endo-Flare 25.12 and Hero 642 30.06, 35.02, 40.02 files, irrigated with 2 mL of 1% NaOCl after each file. The specimens were randomly distributed into 5 groups according to the final irrigation of root canals: Group I: 10 mL of distilled water (control), Group II: 10 mL of 1% NaOCl for 8 min, Group III: 2 mL of 1% NaOCl for 2 min (repeated 4 times), Group IV: 10 mL of 2.5% NaOCl for 8 min, and Group V: 10 mL of 2.5% NaOCl for 2 min (repeated 4 times). The apical thirds of the specimens were subjected to histological processing and 6-μm cross-sections were obtained and stained with hematoxylin-eosin. The specimens were examined under optical microscopy at ×40 magnification and the images were subjected to morphometric analysis using the Scion image-analysis software. The total area of root canal and the area with debris were measured in square millimeters. Analysis of variance showed no statistically significant difference (p>0.05) among the groups GI (2.39 ± 3.59), GII (2.91 ± 2.21), GIII (0.73 ± 1.36), GIV (0.95 ± 0.84) and GV (0.51 ± 0.22). In conclusion, the final irrigation protocols evaluated in this study using the Luer syringe presented similar performance in the removal of debris from the apical third of flattened root canals.

scholarly journals In vitro evaluation of root canal preparation with two rotary instrument systems – Pro Taper and Hero Shaper

2015 ◽  
Vol 88 (3) ◽  
pp. 395-402
Author(s):  
Carola Pentelescu ◽  
Loredana Colceriu ◽  
Ovidiu Pastrav ◽  
Carina Culic ◽  
Radu Chisnoiu
Keyword(s):  
Cross Sections ◽  
Root Canal ◽  
Working Time ◽  
Smear Layer ◽  
Root Canal Preparation ◽  
Root Canals ◽  
Maxillary Premolars ◽  
Oval Cross Section ◽  
The Difference

Background and aims. The purpose of this study was to compare several parameters of root canal preparation using two different rotary Nickel-Titanium instruments: Pro-Taper (Dentsply Maillefer, Ballagigues, Switzerland) and Hero-Shaper (Micro Mega, Besancon, France).Methods. Twelve extracted maxillary premolars were randomly divided into two groups and embedded into a muffle system. All root canals were prepared to size 25 using Pro-Taper or Hero-Shaper rotary instruments.  The following parameters were evaluated: root canal form, centering capacity of the instrument, the presence of residual dentinal debris and smear layer on the root canal walls, working time and the occurrence of intraoperative accidents. Statistical analysis was performed using the chi2 test (p=0.05).Results. The majority of the root canals prepared with Hero Shaper (88.89%) and ProTaper (77.78%) showed a round or oval cross-section postoperatively. Superposition of pre- and postoperative photographs of the cross-sections showed that for the coronal third of the root canals the Hero Shaper performed in a superior manner, while for the apical third better results were obtained with the Pro Taper system. Cleanliness of the root canal walls was investigated under the SEM, in the middle third of the canal, using a five-score system for debris and smear layer. For debris Hero Shaper and Pro Taper rotary systems achieved 66.67% and 50% scores of 1 or 2, respectively. The results for the smear layer were similar: cleaner root canal walls were found after preparation with Hero Shaper (66.67% scores 1, 2), followed by Pro Taper (50%). Mean working time was shorter for Hero Shaper (124s) than for Pro Taper (184s); the difference was not significant.Conclusions. Within the limits of this study, both systems had almost the same cleaning ability and excellent centering capacity.

scholarly journals Comparative study of coronal sealing ability using root cross sections method

2007 ◽  
Vol 54 (4) ◽  
pp. 224-230
Author(s):  
Dejan Markovic ◽  
Vesna Zivojinovic ◽  
Slavoljub Zivkovic
Keyword(s):  
Cross Sections ◽  
Root Canal ◽  
Smear Layer ◽  
Blue Dye ◽  
Human Teeth ◽  
Root Canals ◽  
Dye Penetration ◽  
Gutta Percha ◽  
Significant Difference

Objective: An in vitro comparison of coronal microleakage of three root canal sealers was performed using the dye leakage method. Methodology: Ninety-eight single-rooted human teeth were instrumented and randomly allocated to two groups. In the first group, root canals were treated with EDTA to remove the smear layer. The roots in both groups were obturated using laterally condensed gutta-percha and Sealapex, AH-26 or Ketac-Endo as the sealer. The teeth were suspended in 1% methylene blue dye for 6 days. The teeth were then rinsed, sectioned perpendicular to the long axis and evaluated for coronal dye penetration. Results: In general, Ketac-Endo root canal sealer showed greater dye penetration than Sealapex and AH-26. A statistically significant difference in the coronal penetration of the dye was found in the group with intact smear layer. Conclusion: Highly significant differences between AH-26 and Ketac-Endo (p < 0.001) and Sealapex and Ketac Endo (p < 0.001) were found.

scholarly journals Histological analysis of the periapical tissues of dog deciduous teeth after root canal filling with diferent materials

2005 ◽  
Vol 13 (3) ◽  
pp. 318-324 ◽  
Author(s):  
Sueli Satomi Murata ◽  
Roberto Holland ◽  
Valdir de Souza ◽  
Eloi Dezan Junior ◽  
Juliana Aguiar de Grossi ◽  
...  
Keyword(s):  
Root Canal ◽  
Histological Analysis ◽  
Tissue Reaction ◽  
The Other ◽  
Deciduous Teeth ◽  
Control Group ◽  
Root Canal Filling ◽  
Root Canals ◽  
Anterior Teeth ◽  
Significant Difference

The problem of finding an ideal material for filling root canals of deciduous teeth has not been solved yet. This fact led to the development of an experiment to histologically analyze the periapical tissue reaction to 3 root canal filling materials. Eighty root canals of dog deciduous anterior teeth from 6 animals, 60 days old, were used in this study. After biomechanical preparation, the root canals were filled with the following materials: slowly resorbable Maisto paste, Sealer 26 with iodoform, L&C paste (calcium hydroxide with olive oil) and as a control group, canals that were prepared but not filled. At thirty days after the treatment the animals were killed and the teeth prepared for histological analysis. The materials were ranked statistically from the best to the worst as follows: a - Maisto paste, b - Sealer 26 with iodoform, c - control group, d - L&C paste. There was significant difference (p = 0.01) only when the results of the other groups were compared with the L&C paste group. It was also observed that L&C paste was not biologically compatible and that the other materials were biocompatible but their resorption was not at the same rate as that of the deciduous teeth roots.

scholarly journals In vitro study of effect of solvent on root canal retreatment

2002 ◽  
Vol 13 (3) ◽  
pp. 208-211 ◽  
Author(s):  
Kazumi Onaga Nagayama Oyama ◽  
Evandro Luiz Siqueira ◽  
Marcelo dos Santos
Keyword(s):  
In Vitro Study ◽  
The Other ◽  
Orange Oil ◽  
Root Canals ◽  
Effect Of Solvent ◽  
Gutta Percha ◽  
Root Canal Retreatment ◽  
Significant Difference ◽  
Made In

The aim of this study was to assess the effectiveness of five different solvents: xylol, eucalyptol, halothane, chloroform and orange oil on softening gutta-percha in simulated root canals. One drop of solvent was placed into a reservoir made in a simulated canal whose channel was previously instrumented and filled with gutta-percha and N-Rickert sealer. After 5 min, softening was evaluated for each solvent by the penetration of a spreader while applying force with a 442 Instron apparatus to reach a depth of 5 mm. The results were analyzed statistically by the Kruskal-Wallis test. Xylol and orange oil were better in softening gutta-percha than the other solvents. There was no significant difference between xylol and orange oil, but these were statistically different from eucalyptol, halothane and chloroform (p<0.01).

scholarly journals Dentin permeability of the apical third in different groups of teeth

2010 ◽  
Vol 21 (3) ◽  
pp. 216-219 ◽  
Author(s):  
Rodrigo Gonçalves Ribeiro ◽  
Melissa Andreia Marchesan ◽  
Ricardo Gariba Silva ◽  
Manoel D. Sousa-Neto ◽  
Jesus Djalma Pécora
Keyword(s):  
Cross Sections ◽  
Copper Ions ◽  
Ex Vivo ◽  
Copper Ion ◽  
Apical Region ◽  
Root Canals ◽  
Dentin Permeability ◽  
Glass Slides ◽  
Rubeanic Acid ◽  
Ex Vivo Study

This ex vivo study evaluated dentin permeability of the root canal in the apical third of different human groups of teeth. Eighty teeth were used, 8 from each dental group: maxillary and mandibular central incisors, lateral incisors and canines, maxillary first premolars (buccal and palatal roots), mandibular first premolars, and maxillary and mandibular second premolars, totalizing 88 roots that were distributed in 11 groups. The root canals were instrumented, irrigated with 1% NaOCl and 15% EDTA. Roots were immersed in 10% copper sulfate for 30 min and then in 1% rubeanic acid alcohol solution for the same period; this chemical reaction reveals dentin permeability by the formation of copper rubeanate, which is a dark-colored compound. Semi-serial 100-µm-thick cross-sections were obtained from the apical third of the roots. Five sections of each apical third were washed, dehydrated, cleared and mounted on glass slides for examination under optical microscopy. The percentage of copper ion infiltration and the amount of tubular dentin were quantified by morphometric analysis. The penetration of copper ions in the apical third ranged from 4.60 to 16.66%. The mandibular central and lateral incisors presented the highest dentin permeability (16.66%), while the maxillary canines and mandibular second and first premolars presented the lowest dentin permeability (4.60%, 4.80% and 5.71%, respectively; p<0.001). The other teeth presented intermediate permeability. In conclusion, dye penetration into dentin tubules at the apical region is strongly dependent on the group of teeth evaluated.

scholarly journals In vitro evaluation of the effects of the interaction between irrigating solutions, intracanal medication and Er:YAG laser in dentin permeability of the endodontic system

2003 ◽  
Vol 17 (3) ◽  
pp. 278-285 ◽  
Author(s):  
Denise Pontes Raldi ◽  
José Luiz Lage-Marques
Keyword(s):  
Citric Acid ◽  
Er:Yag Laser ◽  
Experimental Period ◽  
The Other ◽  
Control Group ◽  
Root Canals ◽  
Software Analysis ◽  
Dentin Permeability ◽  
Laser Group

The purpose of this study was to evaluate in vitro the effects of different associations between irrigating solutions (EDTA-T and citric acid), intracanal medicament (NDP), and Er:YAG laser irradiation on dentin permeability. Fifty-one extracted single-rooted teeth were instrumented and divided into seven groups. Groups GI and GII had final irrigation with a demineralizing solution only (EDTA-T and citric acid, respectively). Groups GIII and GIV had final irrigation with EDTA-T and citric acid, respectively, plus an association of irrigating solution and Er:YAG laser. Groups GV and GVI had final irrigation with EDTA-T and citric acid, respectively, plus an association of intracanal medication and Er:YAG laser. Group GVII (control group) had final irrigation with distilled water. All root canals were filled with NDP associated with rhodamine B dye. After the experimental period, the samples were transversely cut into six 2.0 mm thick slices for subsequent reading using the ImageLab software. Analysis of the results allowed us to conclude that there were statistically significant differences (p < 0.05) between the groups as to the penetration of the dye-intracanal medication solution. Groups III and IV presented smaller values of dentinal permeability when compared to the other groups. The best results were obtained with the interaction between a demineralizing irrigating solution and the association of intracanal medicament and laser Er:YAG (groups V and VI). In these groups the observed penetration of the intracanal medicament plus dye solution in the apical third was, on average, 29% greater than in the other groups.

Sign in / Sign up

Export Citation Format

Share Document