scholarly journals A comparison of microhardness of indirect composite restorative materials

2003 ◽  
Vol 11 (2) ◽  
pp. 157-161 ◽  
Author(s):  
Carolina Baptista Miranda ◽  
Clóvis Pagani ◽  
Marco Cícero Bottino ◽  
Ana Raquel Benetti
Keyword(s):  
Mechanical Properties ◽  
Composite Resins ◽  
Experimental Conditions ◽  
Homogeneity Of Variances ◽  
Multiple Comparison Test ◽  
Indirect Composite ◽  
Natural Teeth ◽  
Exploratory Data ◽  
The Mean ◽  
The Difference

The purpose of this study was to compare the microhardness of four indirect composite resins. Forty cylindrical samples were prepared according to the manufacturer’s recommendations using a Teflon mold. Ten specimens were produced from each tested material, constituting four groups (n=10) as follows: G1 - Artglass; G2 - Sinfony; G3 - Solidex; G4 - Targis. Microhardness was determined by the Vickers indentation technique with a load of 300g for 10 seconds. Four indentations were made on each sample, determining the mean microhardness values for each specimen. Descriptive statistics data for the experimental conditions were: G1 - Artglass (mean ±standard deviation: 55.26 ± 1.15HVN; median: 52.6); G2 - Sinfony (31.22 ± 0.65HVN; 31.30); G3 - Solidex (52.25 ± 1.55HVN; 52.60); G4 - Targis (72.14 ± 2.82HVN; 73.30). An exploratory data analysis was performed to determine the most appropriate statistical test through: (I) Levene's for homogeneity of variances; (II) ANOVA on ranks (Kruskal-Wallis); (III) Dunn's multiple comparison test (0.05). Targis presented the highest microhardness values while Sinfony presented the lowest. Artglass and Solidex were found as intermediate materials. These results indicate that distinct mechanical properties may be observed at specific materials. The composition of each material as well as variations on polymerization methods are possibly responsibles for the difference found in microhardness. Therefore, indirect composite resin materials that guarantee both good esthetics and adequate mechanical properties may be considered as substitutes of natural teeth.

The Threshold for Sudden Changes in the Velocity of a Seen Object

1950 ◽  
Vol 2 (1) ◽  
pp. 33-41 ◽  
Author(s):  
W. E. Hick
Keyword(s):  
Initial Velocity ◽  
Moving Objects ◽  
Significant Proportion ◽  
Difference Threshold ◽  
Experimental Conditions ◽  
Velocity Change ◽  
The Mean ◽  
The Difference ◽  
Velocity Changes ◽  
Method Of Constant Stimuli

The difference threshold for the velocity of a seen object was measured by the method of constant stimuli, using two categories. An approximate correspondence with Weber's law was found, the divergence from it appearing, in general, as an increase of the threshold at both ends of the range of initial velocities. The Mean Threshold (0·5 probability of perception, corrected for guessing) was, in favourable conditions, about 12 per cent, of the initial velocity. Whether the stimulus was an increase or a decrease of velocity made no marked difference. With two moving objects, which converged, crossed, and then diverged, both suffering the same change of velocity, the threshold was higher. Velocity changes as low as 2 · 5 per cent, elicited a significant proportion of correct responses. Some theoretical points in connection with this are discussed. Responses to blank stimuli showed a strong tendency to guess “slower,” which tendency differed significantly in degree between most of the experimental conditions. Tests with reduced exposure times showed that exposures could be as short as 0 · 5 second (the velocity change occurring in the middle of the exposure) without appreciable detriment.

scholarly journals Comparison of silorane and methacrylate-based composite resins on the curing light transmission

2010 ◽  
Vol 21 (6) ◽  
pp. 538-542 ◽  
Author(s):  
Ricardo Danil Guiraldo ◽  
Simonides Consani ◽  
Rafael Leonardo Xediek Consani ◽  
Sandrine Bittencourt Berger ◽  
Wilson Batista Mendes ◽  
...  
Keyword(s):  
Composite Resin ◽  
Light Transmission ◽  
Knoop Hardness ◽  
Composite Resins ◽  
Power Meter ◽  
Light Curing ◽  
Curing Light ◽  
The Mean ◽  
Spectral Distributions ◽  
The Difference

The aim of this study was to investigate the influence of different composite resins - Filtek P90 (silorane-based composite) and Heliomolar (methacrylate-based composite) - on light transmission and decrease in Knoop hardness between the bottom and top of cured specimens. The irradiance of a light-curing unit (LCU) was measured with a power meter (Ophir Optronics; 900 mw/cm2) and spectral distributions were obtained using a spectrometer (USB 2000). Twenty standardized cylindrical specimens (2 mm thick x 7 mm diameter) of each composite resin were obtained by curing using the LCU for 40 s. Light energy transmission through the composite was calculated (n=10). The Knoop hardness number for each surface was recorded as the mean of 3 indentations. The difference in Knoop hardness between the top and bottom (DKH) of the same specimen was calculated (n=10). The irradiance of light that passed through Filtek P90 (272 mW/cm2) was not significantly greater than that the passed through Heliomolar (271 mW/cm2). The DKH of Filtek P90 (25%) was significantly higher than that of Heliomolar (12%). There was a greater degree of subsurface polymerization of the methacrylate-based composite compared to the silorane-based composite.

scholarly journals Reticulocyte rigidity and passage through endothelial-like pores

Blood ◽  
1991 ◽  
Vol 78 (11) ◽  
pp. 3037-3042 ◽  
Author(s):  
RE Waugh
Keyword(s):  
Mechanical Properties ◽  
Bone Marrow ◽  
In Vitro Model ◽  
Gradient Centrifugation ◽  
The Mean ◽  
The Difference ◽  
Vitro Model ◽  
Mean Time ◽  
Endothelial Pores

The importance of cell rigidity in regulating the release of reticulocytes from the bone marrow has been investigated in a model system. Reticulocytes were obtained from phlebotomized rabbits and separated from whole blood by discontinuous density gradient centrifugation. The mechanical properties of the cells were tested. Using single-cell micromechanical techniques, the membrane elastic rigidity and the viscoelastic response of reticulocyte and mature cell populations were measured. The reticulocyte membranes were more rigid than the mature membranes, but the reticulocyte properties were heterogeneous, and some cells exhibited behavior indistinguishable from the mature cells. The mean time constant for viscoelastic recovery was the same for reticulocytes as for mature cells, but the variability within the reticulocyte population was greater. The possible influence of this increased rigidity on cell egress from the bone marrow was tested using an in vitro model of the thin endothelial pores found within the marrow. A silicon wafer approximately 0.1 microns in thickness and containing a small (1.2-microns diameter) pore in its center was cemented over the tip of a large (15.0-microns ID) micropipette. The passage of cells through the pore was observed as a function of the pressure across the pore. Consistent with the difference in mechanical properties, the reticulocytes required greater pressures (as great as 4.0 mm Hg compared with less than 1.0 mm Hg) and took longer to traverse the pore. These measurements support the postulate that deformability is important in the regulation of the release of cells from bone marrow.

scholarly journals Reticulocyte rigidity and passage through endothelial-like pores

Blood ◽  
1991 ◽  
Vol 78 (11) ◽  
pp. 3037-3042 ◽  
Author(s):  
RE Waugh
Keyword(s):  
Mechanical Properties ◽  
Bone Marrow ◽  
In Vitro Model ◽  
Gradient Centrifugation ◽  
The Mean ◽  
The Difference ◽  
Vitro Model ◽  
Mean Time ◽  
Endothelial Pores

Abstract The importance of cell rigidity in regulating the release of reticulocytes from the bone marrow has been investigated in a model system. Reticulocytes were obtained from phlebotomized rabbits and separated from whole blood by discontinuous density gradient centrifugation. The mechanical properties of the cells were tested. Using single-cell micromechanical techniques, the membrane elastic rigidity and the viscoelastic response of reticulocyte and mature cell populations were measured. The reticulocyte membranes were more rigid than the mature membranes, but the reticulocyte properties were heterogeneous, and some cells exhibited behavior indistinguishable from the mature cells. The mean time constant for viscoelastic recovery was the same for reticulocytes as for mature cells, but the variability within the reticulocyte population was greater. The possible influence of this increased rigidity on cell egress from the bone marrow was tested using an in vitro model of the thin endothelial pores found within the marrow. A silicon wafer approximately 0.1 microns in thickness and containing a small (1.2-microns diameter) pore in its center was cemented over the tip of a large (15.0-microns ID) micropipette. The passage of cells through the pore was observed as a function of the pressure across the pore. Consistent with the difference in mechanical properties, the reticulocytes required greater pressures (as great as 4.0 mm Hg compared with less than 1.0 mm Hg) and took longer to traverse the pore. These measurements support the postulate that deformability is important in the regulation of the release of cells from bone marrow.

scholarly journals The Influence of Popular Beverages on Mechanical Properties of Composite Resins

Materials ◽  
2021 ◽  
Vol 14 (11) ◽  
pp. 3097
Author(s):  
Leszek Szalewski ◽  
Dorota Wójcik ◽  
Marcin Bogucki ◽  
Jacek Szkutnik ◽  
Ingrid Różyło-Kalinowska
Keyword(s):  
Mechanical Properties ◽  
Flexural Strength ◽  
Vickers Microhardness ◽  
Dental Treatment ◽  
Composite Resins ◽  
Dental Composite ◽  
Strength Testing ◽  
Distilled Water ◽  
Dental Composite Resins ◽  
The Mean

Currently, composite resins are used in many restorative procedures. Previous studies showed that drinking beverages may affect the mechanical properties such as microhardness or flexural strength of dental composite resins. The aim of the present study was to investigate the influence of common beverages on the mechanical properties of composite resins. Samples of the materials were prepared according to the ISO 4049:2010 standard and producer’s recommendations. The samples were next conditioned in tested fluids: distilled water, sparkling water, Coca-Cola, Red Bull and orange juice for 7 days. Vickers microhardness and flexural strength testing was performed after 7 days. Performed statistic tests confirmed the significance of microhardness changes of the tested materials in terms of both different conditioning of the samples and different composite materials. The mean flexural strength of composites was highest in distilled water and it was reduced after one week in different beverages. We conclude that all tested beverages influenced on Vickers microhardness of tested composite resins. Flexural strength only in one material was statistically significantly influenced by tested beverages. The results of this study should be taken into consideration by a dentist preparing recommendations for the patients after dental treatment with usage of composite material or after cementing composite based fixed dentures.

The Effect of Vocabulary Intervention on Text Comprehension: Who Benefits?

2019 ◽  
Vol 50 (4) ◽  
pp. 562-578 ◽  
Author(s):  
Dawna Duff
Keyword(s):  
Middle School ◽  
Reading Comprehension ◽  
Text Comprehension ◽  
Classroom Instruction ◽  
Vocabulary Instruction ◽  
Clinical Intervention ◽  
Vocabulary Knowledge ◽  
Vocabulary Intervention ◽  
The Mean ◽  
The Difference

Purpose Vocabulary intervention can improve comprehension of texts containing taught words, but it is unclear if all middle school readers get this benefit. This study tests 2 hypotheses about variables that predict response to vocabulary treatment on text comprehension: gains in vocabulary knowledge due to treatment and pretreatment reading comprehension scores. Method Students in Grade 6 ( N = 23) completed a 5-session intervention based on robust vocabulary instruction (RVI). Knowledge of the semantics of taught words was measured pre- and posttreatment. Participants then read 2 matched texts, 1 containing taught words (treated) and 1 not (untreated). Treated texts and taught word lists were counterbalanced across participants. The difference between text comprehension scores in treated and untreated conditions was taken as a measure of the effect of RVI on text comprehension. Results RVI resulted in significant gains in knowledge of taught words ( d RM = 2.26) and text comprehension ( d RM = 0.31). The extent of gains in vocabulary knowledge after vocabulary treatment did not predict the effect of RVI on comprehension of texts. However, untreated reading comprehension scores moderated the effect of the vocabulary treatment on text comprehension: Lower reading comprehension was associated with greater gains in text comprehension. Readers with comprehension scores below the mean experienced large gains in comprehension, but those with average/above average reading comprehension scores did not. Conclusion Vocabulary instruction had a larger effect on text comprehension for readers in Grade 6 who had lower untreated reading comprehension scores. In contrast, the amount that children learned about taught vocabulary did not predict the effect of vocabulary instruction on text comprehension. This has implications for the identification of 6th-grade students who would benefit from classroom instruction or clinical intervention targeting vocabulary knowledge.

Articulatory Behavior Pre and Post Full-Mouth Tooth Extraction and Alveoloplasty

1980 ◽  
Vol 23 (3) ◽  
pp. 630-645 ◽  
Author(s):  
Gerald Zimmermann ◽  
J.A. Scott Kelso ◽  
Larry Lander
Keyword(s):  
Control Subject ◽  
High Speed ◽  
Tooth Extraction ◽  
Kinematic Parameters ◽  
Experimental Conditions ◽  
Mean Values ◽  
Articulatory Movements ◽  
The Mean ◽  
Experimental Subjects ◽  
Normal Speech

High speed cinefluorography was used to track articulatory movements preceding and following full-mouth tooth extraction and alveoloplasty in two subjects. Films also were made of a control subject on two separate days. The purpose of the study was to determine the effects of dramatically altering the structural dimensions of the oral cavity on the kinematic parameters of speech. The results showed that the experimental subjects performed differently pre and postoperatively though the changes were in different directions for the two subjects. Differences in both means and variabilities of kinematic parameters were larger between days for the experimental (operated) subjects than for the control subject. The results for the Control subject also showed significant differences in the mean values of kinematic variables between days though these day-to-day differences could not account for the effects found pre- and postoperatively. The results of the kinematic analysis, particularly the finding that transition time was most stable over the experimental conditions for the operated subjects, are used to speculate about the coordination of normal speech.

Effect of silver nitrate on some mechanical properties of heat polymerizing acrylic resins

2019 ◽  
Vol 14 (1) ◽  
pp. 110
Author(s):  
Assiss. Prof. Dr. Sabiha Mahdi Mahdi ◽  
Dr. Firas Abd K. Abd K.
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Silver Nitrate ◽  
Surface Hardness ◽  
Mechanical Tests ◽  
Hardness Tester ◽  
Acrylic Resins ◽  
The Difference

Aim: The aimed study was to evaluate the influence of silver nitrate on surfacehardness and tensile strength of acrylic resins.Materials and methods: A total of 60 specimens were made from heat polymerizingresins. Two mechanical tests were utilized (surface hardness and tensile strength)and 4 experimental groups according to the concentration of silver nitrate used.The specimens without the use of silver nitrate were considered as control. Fortensile strength, all specimens were subjected to force till fracture. For surfacehardness, the specimens were tested via a durometer hardness tester. Allspecimens data were analyzed via ANOVA and Tukey tests.Results: The addition of silver nitrate to acrylic resins reduced significantly thetensile strength. Statistically, highly significant differences were found among allgroups (P≤0.001). Also, the difference between control and experimental groupswas highly significant (P≤0.001). For surface hardness, the silver nitrate improvedthe surface hardness of acrylics. Highly significant differences were statisticallyobserved between control and 900 ppm group (P≤0.001); and among all groups(P≤0.001)with exception that no significant differences between control and150ppm; and between 150ppm and 900ppm groups(P>0.05).Conclusion: The addition of silver nitrate to acrylics reduced significantly the tensilestrength and improved slightly the surface hardness.

Efficacy and Safety of Oral Ivermectin and Topical Permethrin in the Treatment of Scabies

2020 ◽  
Vol 33 (1) ◽  
pp. 41-47
Author(s):  
Mohsena Akhter ◽  
Ishrat Bhuiyan ◽  
Zulfiqer Hossain Khan ◽  
Mahfuza Akhter ◽  
Gulam Kazem Ali Ahmad ◽  
...  
Keyword(s):  
Skin Diseases ◽  
Close Contact ◽  
Randomized Study ◽  
Sarcoptes Scabiei ◽  
Efficacy And Safety ◽  
Common Skin ◽  
Group A ◽  
The Mean ◽  
The Difference ◽  
Group B

Background: Scabies is one of the most common skin diseases in our country. It is caused by the mite Sarcoptes scabiei var hominis, which is an ecto-parasite infesting the epidermis. Scabies is highly contagious. Prevalence is high in congested or densely populated areas. Individuals with close contact with an affected person should be treated with scabicidal which is available in both oral and topical formulations. The only oral but highly effective scabicidal known to date is Ivermectin. Amongst topical preparations, Permethrin 5 % cream is the treatment of choice. Objective: To evaluate the efficacy & safety of oral Ivermectin compared to topical Permethrin in the treatment of scabies. Methodology: This prospective, non-randomized study was conducted at the out-patient department of Dermatology and Venereology of Shaheed Suhrawardy Medical College & Hospital over a period of 6 months, from August 2016 to January 2017. The study population consisted of one hundred patients having scabies, enrolled according to inclusion criteria. They were divided into two groups. group A was subjected to oral Ivermectin and the group B to Permethrin 5% cream. Patients were followed up on day 7 and 14 for assessment of efficacy and safety. Result: The mean scoring with SD in group A (Ivermectin) and group B (Permethrin) were 8.26 ± 2.22 and 7.59 ± 2.01 respectively at the time of observation. The difference between the mean score of the two group is not significant (p=0.117) the mean scoring with SD in group A and group B were 4.54 ± 2.05 and 1.64 ± 1.84 respectively at 7thdays. The difference between the mean score of the two group is significant (p<0.001). The mean scoring with SD in group A and group B were 2.68± 2.35 and .36± 1.10 respectively at 14th day difference between the mean score of the group is significant (p<0.001). Conclusion: Topical application of permethrin 5% cream is more effective and safer than oral Ivermectin in the treatment of scabies. TAJ 2020; 33(1): 41-47

EFFECTS OF SYNTHETIC LH/FSH-RELEASING HORMONE (LRH) ON PLASMA LH AND FSH IN AMENORRHOEIC WOMEN

1974 ◽  
Vol 75 (4) ◽  
pp. 647-652 ◽  
Author(s):  
G. Rannevik ◽  
J. Thorell
Keyword(s):  
Urinary Excretion ◽  
Initial Response ◽  
Releasing Hormone ◽  
The Mean ◽  
The Difference ◽  
Serial Measurements

ABSTRACT Eight amenorrhoeic women were given 100 μg synthetic LRH (Hoechst) iv and im, respectively, at an interval of 2 weeks. Four of the women received the iv injection first and four the im injection. The urinary excretion of oestrogens and pregnanediol was low and unaltered throughout the test weeks. The effects of LRH were compared by serial measurements of the plasma LH and FSH during 8 h. The initial response of LH for up to 25 min and that of FSH for up to 60 min were equal whether LRH was given iv or im. The difference appeared later. Four hours after the injection the mean increase of LH to iv injection was 0.5 ng/ml (N. S.), while that to im injection was 1.9 ng/ml (P < 0.01). The corresponding values for FSH were 1.3 (P < 0.05) and 3.2 (P < 0.001). The effect of LRH administration im was thus found to be larger and more prolonged.

Sign in / Sign up

Export Citation Format

Share Document