scholarly journals Isolation and preliminary evaluation of Mulva Neglecta mucilage: a novel tablet binder

2016 ◽  
Vol 52 (1) ◽  
pp. 201-210 ◽  
Author(s):  
Haroon Rahim ◽  
Abdul Sadiq ◽  
Shahzeb Khan ◽  
Kamran Ahmad Chishti ◽  
Fazli Amin ◽  
...  
Keyword(s):  
Binding Capacity ◽  
Diclofenac Sodium ◽  
Angle Of Repose ◽  
Binding Potential ◽  
Wet Granulation ◽  
Preliminary Evaluation ◽  
Disintegration Time ◽  
Tablet Dosage ◽  
Tapped Density ◽  
Pvp K30

ABSTRACT The aim of this study was to evaluate binding potential of Mulva neglecta mucilage (MNM) with subsequent comparison to PVP K30. Eight batches of Diclofenac sodium tablets were prepared by wet granulation technique keeping different concentrations (4, 6, 8 & 10% w/w) of Mulva neglecta mucilage (extracted from leaves of Mulva neglecta) and PVP K30 as standard binder. The granules of formulated batches showed bulk density (g/mL) 0.49 ± 0.00 to 0.57 ± 0.00, tapped density (g/mL) 0.59 ± 0.01 to 0.70 ± 0.01, Carr's index 09.27 ± 0.95 to 19.65 ± 0.59, Hausner's ratio 1.12 ± 0.00 to 1.24 ± 0.01 and angle of repose 30.37 ± 2.90 °C to 36.86 ± 0.94 °C. Tablets were compressed to hardness 7.50 to 7.95 kg/cm2. The tablets showed 0.39 ± 0.02 to 0.39 ± 0.01% friability and 7:20 to 14:00 min disintegration time. Granules and post-compression evaluation revealed that parameters assessed were all found to be within the pharmacopoeial limits. The results (hardness, disintegration and dissolution) proved that Mulva neglecta mucilage has better binding capacity for preparation of uncoated tablet dosage form as compared to PVP K30. Among all the formulations, MN-1 to MN-4 showed slow release as compared to PV-1 to PV-4 and thereby Mulva neglecta mucilage exhibited satisfactory drug release phenomenon tablets of diclofenac sodium.

Exploration of Neem Gum, Acrylamide Grafted Neem Gum and Carboxymethylated Neem Gum as Retardant in Tablet Formulation

2020 ◽  
Vol 16 (9) ◽  
pp. 1404-1410
Author(s):  
Rishabha Malviya
Keyword(s):  
Diclofenac Sodium ◽  
Tablet Formulation ◽  
Angle Of Repose ◽  
Wet Granulation ◽  
Binding Agent ◽  
Grafted Polymer ◽  
Model Drug ◽  
Tablet Dosage ◽  
Tapped Density ◽  
Derivatives Of

Background: In the previous study, investigators have synthesized acrylamide grafted and carboxymethylated derivatives of neem gum and evaluated their potential in the formulation of nanoparticles. In continuation of previous work, authors have evaluated neem gum polysaccharide (NGP), acrylamide grafted neem gum polysaccharide (NGP-g-Am) and carboxymethylated neem gum polysaccharide (CMNGP) as binding agent in the tablet dosage form. Methods: Diclofenac sodium was used as a model drug while microcrystalline cellulose and talc were used as excipient in the preparation of granules employing wet granulation technique. NGP, NGP-g-Am and CMNGP were utilized as binding agent in the preparation of granules. Prepared granules were characterized for various pre-compression and post-compression parameters. Results and Discussion: Binding agents were used in the concentration of 4-24%w/w. NGP incorporated granules showed more bulk density and lower values of tapped density, Carr’s index, bulkiness, Hausner’s ratio and angle of repose as compared to NGP-g-Am consisting granules. NGP-g-Am consisting tablets showed more hardness and zero friability as compared to NGP based tablets. Drug content was found lower for the tablets having grafted polymer in place of NGP. CMNGP were also utilized to prepare granules but granules were not be able to compress keeping all the compacting parameters same as used in the case of NGP and NGP-g-Am consisting granules. NGP and NGP-g-Am were able to sustain drug release up to 6 and 8 h, respectively. Conclusion: It can be concluded that NGP-g-Am induces better properties when used as a binder in the tablet formulation than native polymer, while CMNGP cannot be utilized as a binding agent in the preparation of a tablet.

scholarly journals Evaluation of Prunus domestica gum as a novel tablet binder

2014 ◽  
Vol 50 (1) ◽  
pp. 195-202 ◽  
Author(s):  
Haroon Rahim ◽  
Mir Azam Khan ◽  
Amin Badshah ◽  
Kamran Ahmad Chishti ◽  
Salimullah Khan ◽  
...  
Keyword(s):  
Magnesium Stearate ◽  
Angle Of Repose ◽  
Binding Potential ◽  
Wet Granulation ◽  
Physical Parameters ◽  
Dissolution Profile ◽  
Prunus Domestica ◽  
Disintegration Time ◽  
Model Drug ◽  
Pvp K30

To evaluate binding potential of Prunus domestica gum in tablets formulations. Six tablet batches (F-1B to F-6B) were prepared by wet granulation method, containing Avicel pH 101 as diluent, sodium diclofenac as model drug using 10, 15 and 20 mg of Prunus domestica gum as binder and PVP K30 was used as standard binder. Magnesium stearate was used as lubricant. Flow properties of granules like bulk density, tapped density, Carr index, Hausner’s ratio, angle of repose as well as physical parameters of the compressed tablets including hardness, friability, thickness and disintegration time were determined and found to be satisfactory. The FTIR spectroscopic analysis showed that the formulation containing plant gum is compatible with the drug and other excipients used in tablets formulation. Hence the plant gum has role as a potential binder in tablets formulations. The dissolution profile showed that tablets formulations containing Prunus domestica gum 15 mg/200 mg of total weight of tablet as binder showed better results as compared to PVP K30.

scholarly journals FORMULATION AND CHARACTERIZATION OF HERBAL TABLETS FOR THE MANAGEMENT OF DENGUE

2021 ◽  
pp. 104-113
Author(s):  
Shikha Thakur ◽  
Brisha Bhardwaj ◽  
Shouvik Kumar Nandy
Keyword(s):  
Carica Papaya ◽  
Hardness Test ◽  
Herbal Extract ◽  
Angle Of Repose ◽  
Wet Granulation ◽  
Disintegration Time ◽  
Weight Variation ◽  
Phosphorus Iron ◽  
Fresh Pulp ◽  
Tapped Density

Tablets are used as formulation and are prepared by using plant extracts i.e., Carica papaya and Embelica officinalis. These tablets were prepared by using wet granulation method. In this article the extract of leaves of Carica papaya and fruits of Embelica officinalis were used for making herbal tablets. Extracts of leaves of Carica papaya was obtained by cold extraction and through maceration method and the extract of fruits of Embelica officinalis was obtained by maceration process. Both extracts were dried and mixed. These extracts were then impregnated with the excipients like diluents, binding agents, super disintegrating agent, lubricants, etc. to make granules. These granules were then evaluated by using various parameters like Angle of repose, tapped density, bulk density, Carr’s Index, Hausner’s Ratio and void volume. These granules were then used for the making of tablets of desired size and shape by punching in the machine. After preparation of the tablets their evaluation parameters were studied like physical appearance, weight variation, friability, disintegration time, hardness test and thickness. Also the parameters for the acceptance of the tablets is also done like flavor and sweetness. Recent studies have shown that herbal extract of leaves of papaya has beneficial effect as an anti-inflammatory agent, for its wound healing properties, anti-tumor as well as Immunomodulatory effects and as an antioxidant. Amla fruit is a rich natural source of vitamin C (Ascorbic acid) and contains 600-750 mg/100 g of the fresh pulp. Also it is rich in minerals matters like phosphorus, iron and calcium. Amla is used as an Immunomodulatory agent and hence enhance the immunity of the patient. Aim of the study is to design develop and optimize the dosage form to cure dengue and is based on the use of natural plant ingredients to intermingle with chemical as well as synthetic ingredients to develop an effective unit dosage forms for better patient compliance. KEYWORDS: Papaya, Amla, Extracts, Herbal tablet, Dengue, Immunomodulatory, Platelets.

scholarly journals FORMULATION AND EVALUATION OF FLURBIPROFEN FAST DISINTEGRATING TABLETS USING NATURAL SUPERDISINTEGRANTS

2016 ◽  
Vol 9 (6) ◽  
pp. 247 ◽  
Author(s):  
Mohammed Sarfaraz ◽  
Surendra Kumar Sharma
Keyword(s):  
Drug Release ◽  
Angle Of Repose ◽  
Lepidium Sativum ◽  
Disintegration Time ◽  
Natural Sources ◽  
Weight Variation ◽  
Wetting Time ◽  
Tapped Density ◽  
Fast Disintegrating Tablets

ABSTRACTObjective: The main objective of this research was to formulate Fast disintegrating tablets of Flurbiprofen incorporating superdisintegrants, isolated from natural sources like Plantago ovata (PO) seeds, Lepidium sativum (LS) seeds and agar-agar.Methods: Superdisintegrants were isolated from their natural sources using reported methods. Swelling index and hydration capacity was determined for the natural superdisintegrants to know their disintegration capacity. The tablet formulations were designed using isolated natural superdisintegrants. The powder blends were evaluated for pre-compressional parameters like angle of repose, bulk density, tapped density, carr’s index, and hausner’s ratio. Fast disintegrating tablets were prepared by direct compression method. The compressed tablets were characterized for post compression parameters.Results: All formulations had hardness, friability, weight variation and drug content within the pharmacopoeial limits. The wetting time was 84 to 254 sec, in vitro disintegration time was between 59.2 to 221 sec, and in-vitro drug release was as low as 11.80% (LS1) to a maximum of 98.99% (PO4) after 4 min of study. Among all, optimized formulation was PO4, as it showed good wetting time (84 sec), fastest disintegration time (59.2 sec), dispersion time (135 sec) and drug release of 98.99.% within 4 min.Conclusion: Flurbiprofen FDT’s were successfully developed using isolated natural disintegrants. The natural disintegrants isolated showed promising results and can prove as effective alternative for synthetic disintegrants.

scholarly journals Formulation and Optimization of Immediate Release Cajanus Cajan Starch-Based Tablets Containing Metronidazole

2020 ◽  
Vol 5 (1-2) ◽  
pp. 16-19
Author(s):  
Ahmed Abdalla Bakheit Abdelgader ◽  
Daud Baraka Abdallah ◽  
Elnazeer I. Hamedelniel ◽  
Hiba Atif Mutwakil Gafar ◽  
Mohammed Abdelrahman Mohammed
Keyword(s):  
Cajanus Cajan ◽  
Immediate Release ◽  
Wet Granulation ◽  
Maize Starch ◽  
Disintegration Time ◽  
Sodium Starch Glycolate ◽  
Upper Level ◽  
High Level ◽  
Starch Paste ◽  
Tablet Dosage

Starch is found almost in all organs of plants as a carbohydrate reserve. It is considered one of the most commonly used pharmaceutical additives, mainly in tablet dosage forms; it used as a tablet binder when incorporated through the wet granulation process or as a disintegrant. Cajanus cajan has a high level of carbohydrate, which makes it another potential choice as a source for starch. This study aims to investigate and optimize the effect of Cajanus cajan starch concentrations as well as wet massing granulation time on physicochemical properties of metronidazole tablets. The hardness, friability percentage, and disintegration time of prepared tablets were determined, and the central composite design was employed in the optimization process. Then the tablets of optimized batch were compared against those tablets in which maize starch and sodium starch glycolate were used instead of Cajanus cajan starch. The results indicated that metronidazole tablets containing the upper level of starch paste (Cajanus cajan and/or maize starch paste) exhibited better percentage friability, hardness, and disintegration time than those formulated with lower levels and those without starch paste. The study showed that experimental design is a useful technique for optimizing Cajanus cajan starch-based tablets, which enabled a better understanding of how different variables could affect the responses. In addition, the study demonstrated that incorporation of Cajanus cajan starch in tablets formulation led to improvement of its physical properties compared to the formulations of maize starch and sodium starch glycolate respectively.

scholarly journals Preformulation Study of Pugun Tano (Curanga fel-terrae [Lour.] Merr) Ethanolic Extract Granule Mass in Capsule as Hepatoprotective Drug

2019 ◽  
Vol 7 (22) ◽  
pp. 3729-3732
Author(s):  
Urip Harahap ◽  
Marianne Marianne ◽  
Yuandani Yuandani ◽  
Lia Laila
Keyword(s):  
Bulk Density ◽  
Dosage Form ◽  
Corn Starch ◽  
Ethanolic Extract ◽  
Magnesium Stearate ◽  
Angle Of Repose ◽  
Wet Granulation ◽  
Hausner Ratio ◽  
Tapped Density ◽  
Preformulation Study

BACKGROUND: Pugun tano extract had been studied for its effect as hepatoprotector. However, the usage of the plant in the form of extract has a limitation, especially if the extract is consumed by the people due to the unpleasant taste and odour. Then, the extract needs to be transformed into a particular dosage form, such as a capsule. But before the capsule can be produced, a preformulation study of pugun tano extract into a granule mass in capsule need to be evaluated. AIM: The study aimed to formulate the ethanolic extract of pugun tano (Curanga fel-terrae (Lour.) Merr) as granule mass in the capsule dosage form. METHODS: The pugun tano ethanolic extract was formulated in several steps included preparation of dry extract using coating method with polyvinylpyrrolidone (PVP) and granule mass production. The excipients used for the granule mass were lactose granules (made with tapioca starch using wet granulation), corn starch (made with 3 concentrations of 5% (F1), 7.5% (F2) and 10% (F3)), talcum, magnesium stearate, methylparaben, and propylparaben. The granule mass was evaluated for the bulk density, tapped density, inter-particle porosity, Carr’s index, Hausner ratio, angle of repose, and flowability. RESULTS: The results showed that all of the formulae passed the requirement of the preformulation test. The bulk density of the granule mass was 0.79 – 0.86 g/ml; the tapped density was 0.88 – 0.90 g/ml; the inter-particle porosity was 0.03 – 0.14; the Carr’s index was 2.71 – 11.94%; the Hausner ratio was 1.09-1.12; the angle of repose was 26.10 – 28.90°; and the flowing time was 5.97 – 6.63 seconds. All of the formulae showed good flowability and free-flowing properties. CONCLUSION: It is concluded that the obtained formula

scholarly journals Formulation and Evaluation of Effects of Superdisintegrants on Immediate Release Tablet of Linagliptin, a DDP-4 Inhibitor

2021 ◽  
Vol 24 (2) ◽  
pp. 168-179
Author(s):  
Tanoy Saha ◽  
Md Mahbubul Alam ◽  
Dilshad Noor Lira ◽  
Abu Shara Shamsur Rouf
Keyword(s):  
Drug Release ◽  
Immediate Release ◽  
Pharmaceutical Journal ◽  
Dosage Forms ◽  
Angle Of Repose ◽  
Drug Dissolution ◽  
Disintegration Time ◽  
Weight Variation ◽  
Tablet Dosage ◽  
Release Tablet

The study aimed to develop and evaluate an immediate-release tablet dosage form of Linagliptin. Different concentrations (ranges 5-10%) of super-disintegrants, Croscarmellose sodium (CCS), and Sodium starch glycolate (SSG) were used to prepare nine tablet dosage forms (F1 to F9) through the direct compression method. The compatibility of the formulations was evaluated by FTIR to reveal any possible drug-excipient interactions and it was proved to be compatible with all formulations. Precompression (bulk density, tapped density, Carr’s index, Hausner’s ratio, and angle of repose) and post-compression parameters (weight variation, hardness, thickness, and friability) were analyzed for all tablets and the results were found satisfactory as well as within limits as per USP guidelines. All the formulated batches (F1 to F9) exhibited disintegration of tablets within 2 minutes, where formulation F9 represented the lowest disintegration time (51±3 sec) which was also found significantly better than the marketed product (310±5 sec). In terms of drug dissolution, 90% of drug release was observed for all nine formulations within 45 minutes and formulation F9 (5% CCS and 5% SSG) illustrated the rapid and highest dissolution rate compared to the marketed one’s, 100% drug release at 20 minutes and 91.77 % drug release at 30 minutes successively. The respective data sets of drug release were mathematically fitted to several kinetic models and for all formulations, drug release pattern obeyed first-order kinetics amongst those, formulation F2 (r2= 0.98), F4 (r2= 0.99), F5 (r2= 0.98), and F9 (r2= 0.97) were found to be best fitted in this kinetic norm. Based on disintegration time and dissolution data comparison to a brand leader market product, F9 was experienced as the best formulation. Furthermore, it was observed that if SSG and CCS were combined, then these two parameters were more improved compared to their separate uses. Thus, incorporation of the optimum amount of super-disintegrants in a formulation showed rapid swelling, faster disintegration as well as ease of dissolution of tablet dosage forms. Bangladesh Pharmaceutical Journal 24(2): 168-179, 2021

scholarly journals Techniques to Determine Powder Flow Properties

2021 ◽  
Vol 3 (2) ◽  
pp. 199-204
Author(s):  
Shaveta Sharma ◽  
Teenu Sharma ◽  
Mahak Deep ◽  
Ashima Sharma
Keyword(s):  
Food Additives ◽  
Force Transducer ◽  
Angle Of Repose ◽  
Wet Granulation ◽  
Shear Cell ◽  
Wide Scale ◽  
Air Circulation ◽  
Tapped Density ◽  
Scale Creation ◽  
Powder Rheometer

The goal of the current work was to do an orderly assessment of flow of powders and granules using compendial and non-compendial procedure. Angle of repose, Tapped density, Carr's compressibility file, Bulk density, Hausner’s ratios were assessed. Moreover, flow was described utilizing powder rheometer wherein delicate force transducer screens the forces created as consequence of the sample displacement, another technique FT4 powder rheometer. The Freeman Technology (FT4 powder rheometer) is intended to describe powders undergoing different circumstances in manners that look like wide scale creation climate. Techniques incorporate security and irregular flow rate, compressibility, shear cell, air circulation, porousness, divider contact and union. The FT4 has demonstrated application on the whole powders preparing ventures, including drugs, fine synthetic substances, cosmetics, food, additives and powder covering. The FT4 application connect to filling, hopper flow, Tablet pressure, wet granulation, end point, flow added substance determination and enhancement, moisture impacts, static change, feeding, stirring, separation, caking, processing, Wall grating, grip, hopper configuration etc.

scholarly journals Design, development and in vivo pharmacokinetic of telmisartan loaded oral disintegration tablets

2020 ◽  
Vol 11 (4) ◽  
pp. 8108-8118
Author(s):  
Arindam Chatterjee ◽  
Shaik Mohammad Abdulla ◽  
Nagarajan G ◽  
Birendra Shrivastava
Keyword(s):  
Angle Of Repose ◽  
Wet Granulation ◽  
Average Weight ◽  
Content Uniformity ◽  
Design Development ◽  
Disintegration Time ◽  
Dsc Studies ◽  
Elimination Half ◽  
Powder Characteristics

Orodispersible Tablets (ODT) is a novel tableting technology which is formulated, and it overcomes the difficulties of other multi compressed tablets. Telmisartan has a bioavailability of 42-100 percent and a 24-hour elimination half-life. It excretes the majority of drugs through the faeces, which accounts for 97 percent of total drug excretion. The objective of this research is to formulate and evaluate Telmisartan loaded ODT and to prove the enhancement of dissolution and bioavailability of Telmisartan. From the DSC studies, it was confirmed that Telmisartan and excipients used in the formulation are compatible to each other and suitable for the manufacturing process. Telmisartan loaded ODT was formulated by wet granulation technique and evaluated for powder characteristics and release characteristics. About 9 formulations were formulated in each ODT, and all the formulation obeys a good powder flow characteristic from the angle of repose, Carr’s index and Hausner’s ratio. All the experimental formulation batches have been subjected to various evaluations viz, average weight, friability, disintegration, thickness, hardness, dissolution, content uniformity. Among this nine Telmisartan ODT formulations (F1-F9), F7 possess an expected release pattern and disintegration time in a short time period (i.e., 101.8 ± 2.72 in 5th min and disintegration time at 5 seconds), which may fastens the absorption and bioavailability of Telmisartan. It was concluded that ODT was a suitable dosage form to enhance the solubility at the same time the bioavailability of BCS class II drugs like Telmisartan.

scholarly journals FORMULATION AND EVALUATION OF METRONIDAZOLE TABLETS USING NATURAL GUM

2019 ◽  
pp. 304-306
Author(s):  
SUDIPTA DAS ◽  
SOUMITRA DAS
Keyword(s):  
Aloe Vera ◽  
Angle Of Repose ◽  
In Vitro Dissolution ◽  
Binding Agent ◽  
Binding Properties ◽  
Disintegration Time ◽  
Hausner Ratio ◽  
Percentage Release ◽  
Tapped Density

Objectives: The objective of the present study was to formulate the metronidazole tablets using natural Aloe vera gum as binding agent. Materials and Methods: To determine the binding properties of the extracted A. vera gum were used for the preparation of metronidazole tablets and compared with other binding agents such as acacia and sodium carboxymethyl cellulose (CMC). Physical properties such as hardness, friability, disintegration time, and in vitro dissolution rate are the important parameter which determines for each formulation. Three batches of metronidazole tablets are prepared using acacia (F1), sodium CMC (F2), and A. vera gum (F3) as binding agent. Results: The granules were evaluated by determining the angle of repose (26.01 ± 0.110–27.18 ± 0.166°), bulk density, tapped density, Hausner ratio, and Carr’s index. It shows satisfactory results. At time 90 min, the percentage release of drug for F1, F2, and F3 was 44.947%, 31.467%, and 53.424%, respectively. The tablets prepared with A. vera gum showed faster release profile than other binders. Conclusion: From the results, it was shown that tablets prepared with A. vera gum have good binding properties and also helped tablets for faster release.

Sign in / Sign up

Export Citation Format

Share Document