Intrarow Weed Removal in Broccoli and Transplanted Lettuce with an Intelligent Cultivator

2016 ◽  
Vol 30 (3) ◽  
pp. 655-663 ◽  
Author(s):  
Ran N. Lati ◽  
Mark C. Siemens ◽  
John S. Rachuy ◽  
Steven A. Fennimore

The performance of the Robovator (F. Poulsen Engineering ApS, Hvals⊘, Denmark), a commercial robotic intrarow cultivator, was evaluated in direct-seeded broccoli and transplanted lettuce during 2014 and 2015 in Salinas, CA, and Yuma, AZ. The main objective was to evaluate the crop stand after cultivation, crop yield, and weed control efficacy of the Robovator compared with a standard cultivator. A second objective was to compare hand weeding time after cultivation within a complete integrated weed management (IWM) system. Herbicides were included as a component of the IWM system. The Robovator did not reduce crop stand or marketable yield compared with the standard cultivator. The Robovator removed 18 to 41% more weeds at moderate to high weed densities and reduced hand-weeding times by 20 to 45% compared with the standard cultivator. At low weed densities there was little difference between the cultivators in terms of weed control and hand-weeding times. The lower-hand weeding time with the Robovator treatments suggest that robotic intrarow cultivators can reduce dependency on hand weeding compared with standard cultivators. Technological advancements and price reductions of these types of machines will likely improve their weed removal efficacy and the long-term viability of IWM programs that will use them.

Author(s):  
Suryakanta Kashyap ◽  
V.P. Singh ◽  
S.K. Guru ◽  
Tej Pratap ◽  
S.P. Singh ◽  
...  

Background: Weeds are the major threat to direct seeded rice and a single strategy of weed control may not be effective for season-long weed control. Intending to accomplish the long-term and sustainable weed management of direct seeded rice, the integration approach of weed management strategies seems a better alternative. The current field study was aimed to evaluate the impact of integration of different weed control methods on direct seeded rice under irrigated ecosystem on weed growth and rice yield. Methods: The experiment was laid out in randomized block design with three replications and twelve treatments during 2017 at G.B. Pant University of Agriculture and Technology, Pantnagar, Uttarakhand, India. The twelve treatments included the combination of cultural, mechanical, physical and chemical weed management methods. Result: Combination of stale seedbed technique integrated with pre-emergence application of pendimethalin with mechanical weeding at 25 DAS followed by 1 hand weeding at 45 DAS, Sesbania (line sowing) fb application of pendimethalin (PE) fb 1 mechanical weeding at 25 DAS fb 1 hand weeding at 45 DAS, stale seedbed with application of pendimethalin (PE) with Sesbania brown manuring supplemented with mechanical weeding (25 DAS) fb hand weeding at 45 DAS, mulching with wheat straw mulch along with post-emergence application of penoxsulam (20 DAS) fb 1 hand weeding at 45 DAS and application of pendimethalin (PE) fb penoxsulum (PoE) at 20 DAS fb 1 hand weeding at 45 DAS with a row spacing of 25 cm found to be similar in the suppression of weed population and weed density at 40 and 60 DAS and crop yields (4.3, 4.1, 4.2, 4.0 and 4.2 t/ha, respectively) were on par with weed free plot i.e. 4.4t/ha. Application of pendimethalin (PE) fb penoxsulum (PoE) at 20 DAS fb 1 hand weeding at 45 DAS with row spacing of 25cm recorded 93.7%, 90.6% and 4.5% weed control efficiency, weed control index and weed index respectively, which was similar with above integrated weed management treatments. A negative correlation of the weed density and dry matter with the yield of rice was recorded.


2014 ◽  
Vol 14 (2) ◽  
pp. 33-42 ◽  
Author(s):  
KP Bhurer ◽  
DN Yadav ◽  
JK Ladha ◽  
RB Thapa ◽  
KR Pandey

Field experiment under dry direct seeded rice(Oryza sativa L.) was conducted during rainy season of 2010 and 2011 at Regional Agriculture Research Station (RARS), Parwanipur, Bara to develop appropriate weed management practices for dry direct- seeded rice. The trial was laid-out in randomized complete block design (RCBD) and replicated thrice. Observations were taken on weed, plant growth and yield attributing, yield, and socio-economic parameters. The weed density, dry weed weight and weed control efficiency resulted significantly different as influenced by integrated weed management practices. Low weed population density, low weed index and highest weed control efficiency resulted by pendimethalin followed by 2, 4- D followed by one hand weeding were at par with weed free check. Highest yield resulted from weed free plot followed by pendimethalin followed by two hand weeding and pendimethalin followed by 2, 4- D followed by one hand weeding. However, the net return per unit investment resulted highest in pendimethalin followed by 2, 4- D followed by one hand weeding. This proved that amid increasing wage rate and labour scarcity integrated weed management through pendimethalin 30 EC (Stomp) @1 kg a. i. /ha as pre- emergence herbicide application followed by 2, 4- D sodium salt 80 WP @ 0.5 kg a. i. /ha followed by one hand weeding or stale seed bed followed by pendimethalin 30 EC (Stomp) @1 kg a. i. /ha followed by bispyribac (Nominee gold) @25 g a. i. /ha 10% @200 ml/ha at 20 days of seeding resulted best alternative for manual hand weeding practices giving higher net return per unit investment. DOI: http://dx.doi.org/10.3126/njst.v14i2.10413   Nepal Journal of Science and Technology Vol. 14, No. 2 (2013) 33-42


Author(s):  
Sheeja K Raj ◽  
Elizabeth K Syriac

Weeds are the major biological constraint in direct seeded rice (DSR) due to the concurrent emergence of competitive weeds, absence of water to suppress weeds at the time of seedling emergence and emergence of difficult to control weeds. Strategies on weed management in direct seeded rice depend on critical period of weed control, weed flora and method to be adopted. In order to achieve the long term and sustainable management of weeds in DSR an integration of different weed management strategies like integrated weed management (IWM) are essential. The literature regarding the critical period of weed control, weed flora and different methods for the sustainable management of weeds in direct seeded rice are reviewed in this paper.


2018 ◽  
Vol 10 (2) ◽  
pp. 779-790 ◽  
Author(s):  
Ajay Singh ◽  
D. P. Nandal ◽  
S. S. Punia ◽  
Priti Malik

In the Indo-Gangetic Plains (IGP) of India, rice (Oryza sativa L.) is taken by conventional tilled puddled transplanted (CT-PTR) method. CT-PTR requires a lot of water (2000-2500 mm) which comes mainly from groundwater. Due to declining water table and changing climate, the sustainability of CT-PTR rice is under immense pressure. The alternative to CT-PTR could be direct seeded rice (DSR) which requires less water, labor, initial cost and energy than CT-PTR. But direct seeded rice is heavily infested with weeds which cause severe loss to the grain yield. Thus, the success of aerobic rice depends on effective and timely weed control. As a single weed control method may not be successful on a long term basis, weed problem in direct seeded rice needs to be solved by integrated approach. Integrating cultural, mechanical and chemical methods along with highly competitive cultivars with effective allelopathic properties, effective weed management on long term sustainable basis can be achieved.


2004 ◽  
Vol 18 (4) ◽  
pp. 1006-1012 ◽  
Author(s):  
K. Neil Harker ◽  
George W. Clayton ◽  
John T. O'Donovan ◽  
Robert E. Blackshaw ◽  
F. Craig Stevenson

Herbicide-resistant canola dominates the canola market in Canada. A multiyear field experiment was conducted at three locations to investigate the effect of time of weed removal (two-, four-, or six-leaf canola) and herbicide rate (50 or 100% recommended) in three herbicide-resistant canola systems. Weeds were controlled in glufosinate-resistant canola (GLU) with glufosinate, in glyphosate-resistant canola (GLY) with glyphosate, and in imidazolinone-resistant canola (IMI) with a 50:50 mixture of imazamox and imazethapyr. Canola yields were similar among the three canola cultivar–herbicide systems. Yields were not influenced by 50 vs. 100% herbicide rates. Timing of weed removal had the greatest effect on canola yield, with weed removal at the four-leaf stage giving the highest yields in most cases. Percent dockage was often greater for GLU and IMI than for GLY. In comparison with the other treatments, dockage levels doubled for GLU after application at 50% herbicide rates. The consistency of monocot weed control was usually greater for GLY than for GLU or IMI systems. However, weed biomass data revealed no differences in dicot weed control consistency between IMI and GLY systems. Greater dockage and weed biomass variability after weed removal at the six-leaf stage or after low herbicide rates suggests higher weed seed production, which could constrain the adoption of integrated weed management practices in subsequent years.


Agriculture ◽  
2018 ◽  
Vol 8 (9) ◽  
pp. 138 ◽  
Author(s):  
Hilary Sandler

Integrated weed management (IWM) has been part of cranberry cultivation since its inception in the early 19th century. Proper site and cultivar selection, good drainage, rapid vine establishment, and hand weeding are as important now for successful weed management as when the industry first started. In 1940, Extension publications listed eight herbicides (e.g., petroleum-based products, inorganic salts and sulfates) for weed control. Currently, 18 herbicides representing 11 different modes of action are registered for use on cranberries. Nonchemical methods, such as hand weeding, sanding, flooding, and proper fertilization, remain integral for managing weed populations; new tactics such as flame cultivation have been added to the toolbox. Priority ratings have been developed to aid in weed management planning. Despite many efforts, biological control of weeds remains elusive on the commercial scale. Evaluation of new herbicides, unmanned aerial systems (UAS), image analysis, and precision agriculture technology; investigation of other management practices for weeds and their natural enemies; utilization of computational decision making and Big Data; and determination of the impact of climate change are research areas whose results will translate into new use recommendations for the weed control of cranberry.


2016 ◽  
Vol 34 (1) ◽  
pp. 57-64 ◽  
Author(s):  
S. MUHAMMAD ◽  
I. MUHAMMAD ◽  
A. SAJID ◽  
L. MUHAMMAD ◽  
A. MAQSHOOF ◽  
...  

Weed management is a primary concern in direct seeded rice (DSR) cropping because weed growth becomes a major constraint on crop yield. A two year field study was set up to evaluate the effect of various weed control measures on crop growth, grain yield and grain quality of DSR. The experiment involved five different weed control measures: hand weeding, hoeing, inter-row tine cultivation, inter-row spike hoeing and herbicide treatment (Nominee 100 SC). The extent of weed control (compared to a non-weeded control) ranged from 50-95%. The highest crop yield was obtained using hand weeding. Hand weeding, tine cultivation and herbicide treatment raised the number of fertile rice tillers formed per unit area and the thousand grain weight. Tine cultivation provided an effective and economical level of weed control in the DSR crop.


2015 ◽  
Vol 29 (4) ◽  
pp. 751-757 ◽  
Author(s):  
Jonne Rodenburg ◽  
Kazuki Saito ◽  
Runyambo Irakiza ◽  
Derek W. Makokha ◽  
Enos A. Onyuka ◽  
...  

Time requirements, weed control efficacy, and yield effects of three labor-saving weed technologies were tested against hand weeding during three seasons in 2012 and 2013. The technologies included two hand-operated mechanical weeders, the straight-spike and the twisted-spike floating weeder, and the PRE application of oxadiazon. The straight-spike floating weeder reduced weeding time by 32 to 49%, the twisted-spike floating weeder reduced weeding time by 32 to 56%, and the application of herbicide required 88 to 97% less time than hand weeding. Herbicide application provided the best weed control in two of the three seasons. No differences in weed control efficacy were observed between mechanical and hand weeding. Yield differences were only observed in season 3 with higher rice yields after PRE application of oxadiazon compared with other weed management treatments.


2015 ◽  
Author(s):  
Muhammad Saqib ◽  
Sajid Ali ◽  
Muhammad Ijaz ◽  
Muhammad Latif ◽  
Maqshoof Ahmad ◽  
...  

Weed management is a primary concern in direct seeded rice (DSR) cropping because weed growth becomes a major constraint on crop yield. A two year field study was set up to evaluate the effect of various weed control measures on crop growth, grain yield and grain quality of DSR. The dry seeded non flooded rice experiment involved five different weed control measures: hand weeding, hoeing, inter-row tine cultivation, inter-row spike hoeing and herbicide treatment (Nominee 100 SC). The extent of weed control (compared to a non-weeded control) ranged from 50-95%. The highest crop yield was obtained using hand weeding. Hand weeding, tine cultivation and herbicide treatment raised the number of fertile rice tillers formed per unit area and the thousand grain weight. Tine cultivation provided an effective and economical level of weed control in the DSR crop.


Sign in / Sign up

Export Citation Format

Share Document