scholarly journals Labor-Saving Weed Technologies for Lowland Rice Farmers in sub-Saharan Africa

2015 ◽  
Vol 29 (4) ◽  
pp. 751-757 ◽  
Author(s):  
Jonne Rodenburg ◽  
Kazuki Saito ◽  
Runyambo Irakiza ◽  
Derek W. Makokha ◽  
Enos A. Onyuka ◽  
...  
Keyword(s):  
Weed Control ◽  
Weed Management ◽  
Sub Saharan Africa ◽  
Herbicide Application ◽  
Control Efficacy ◽  
Rice Farmers ◽  
Time Requirements ◽  
Rice Yields ◽  
Sub Saharan ◽  
Hand Weeding

Time requirements, weed control efficacy, and yield effects of three labor-saving weed technologies were tested against hand weeding during three seasons in 2012 and 2013. The technologies included two hand-operated mechanical weeders, the straight-spike and the twisted-spike floating weeder, and the PRE application of oxadiazon. The straight-spike floating weeder reduced weeding time by 32 to 49%, the twisted-spike floating weeder reduced weeding time by 32 to 56%, and the application of herbicide required 88 to 97% less time than hand weeding. Herbicide application provided the best weed control in two of the three seasons. No differences in weed control efficacy were observed between mechanical and hand weeding. Yield differences were only observed in season 3 with higher rice yields after PRE application of oxadiazon compared with other weed management treatments.

Intrarow Weed Removal in Broccoli and Transplanted Lettuce with an Intelligent Cultivator

2016 ◽  
Vol 30 (3) ◽  
pp. 655-663 ◽  
Author(s):  
Ran N. Lati ◽  
Mark C. Siemens ◽  
John S. Rachuy ◽  
Steven A. Fennimore
Keyword(s):  
Weed Control ◽  
Weed Management ◽  
Integrated Weed Management ◽  
Marketable Yield ◽  
Control Efficacy ◽  
Direct Seeded ◽  
Hand Weeding ◽  
Crop Stand ◽  
Weed Removal

The performance of the Robovator (F. Poulsen Engineering ApS, Hvals⊘, Denmark), a commercial robotic intrarow cultivator, was evaluated in direct-seeded broccoli and transplanted lettuce during 2014 and 2015 in Salinas, CA, and Yuma, AZ. The main objective was to evaluate the crop stand after cultivation, crop yield, and weed control efficacy of the Robovator compared with a standard cultivator. A second objective was to compare hand weeding time after cultivation within a complete integrated weed management (IWM) system. Herbicides were included as a component of the IWM system. The Robovator did not reduce crop stand or marketable yield compared with the standard cultivator. The Robovator removed 18 to 41% more weeds at moderate to high weed densities and reduced hand-weeding times by 20 to 45% compared with the standard cultivator. At low weed densities there was little difference between the cultivators in terms of weed control and hand-weeding times. The lower-hand weeding time with the Robovator treatments suggest that robotic intrarow cultivators can reduce dependency on hand weeding compared with standard cultivators. Technological advancements and price reductions of these types of machines will likely improve their weed removal efficacy and the long-term viability of IWM programs that will use them.

scholarly journals Row spacing and weed management methods influences growth and yield of soybean (Glycine max (L.) Merr.)

2019 ◽  
Vol 52 (2) ◽  
pp. 59-71 ◽  
Author(s):  
Olumide Samuel Daramola ◽  
Olusegun Raphael Adeyemi ◽  
Joseph Aremu Adigun ◽  
Christopher Olu Adejuyigbe
Keyword(s):  
Grain Yield ◽  
Weed Control ◽  
Weed Management ◽  
Dry Matter ◽  
Field Trials ◽  
Sub Saharan Africa ◽  
Growth And Yield ◽  
Row Spacing ◽  
Subsequent Increase ◽  
Sub Saharan

Abstract Weed infestation is among the primary reasons for low yields of soybean in Nigeria and other parts of Sub Saharan Africa (SSA). Field trials were therefore carried out in 2016 and 2017 cropping seasons to evaluate the effect of row spacing and weed management methods on growth and yield of soybean. The use of 50 cm row spacing resulted in significant (P < 0.05) reduction in weed cover score, weed density and weed dry matter with subsequent increase in soybean growth and grain yield compared to 75 and 100 cm row spacings in both years. In addition, early weed control with probaben at 2.0 kg a.i (active ingredient) ha1 followed by (fb) supplementary hoe weeding (shw) at 6 weeks after sowing (WAS) suppressed weeds and increased soybean growth, which carried through to final dry matter and yield. Pre-emergence application of Probaben fb shw at 6 WAS gave the best weed control and resulted in significantly (P < 0.05) higher soybean grain yield compared to two and three hoe weedings or sole application of probaben under 50 and 75 cm inter-row spacing. However, three hoe weedings gave the best weed control and grain yield under 100 cm inter-row spacing. These results suggest that narrow row spacing of 50 cm and weed control by pre-emergence application of probaben fb shw will improve the productivity of soybean. Wide row spacing, however, required longer weed-free period and consequently multiple hoe weeding for optimum soybean yield.

scholarly journals FARMERS’ PERCEPTIONS ON MECHANICAL WEEDERS FOR RICE PRODUCTION IN SUB-SAHARAN AFRICA

2018 ◽  
Vol 55 (1) ◽  
pp. 117-131 ◽  
Author(s):  
JEAN-MARTIAL JOHNSON ◽  
JONNE RODENBURG ◽  
ATSUKO TANAKA ◽  
KALIMUTHU SENTHILKUMAR ◽  
KOKOU AHOUANTON ◽  
...  
Keyword(s):  
Weed Management ◽  
Management Practices ◽  
Water Status ◽  
Sub Saharan Africa ◽  
Field Size ◽  
Follow Up Study ◽  
Wide Range ◽  
Sub Saharan ◽  
Hand Weeding

SUMMARYCompetition from weeds is one of the major biophysical constraints to rice (Oryza spp.) production in sub-Saharan Africa. Smallholder rice farmers require efficient, affordable and labour-saving weed management technologies. Mechanical weeders have shown to fit this profile. Several mechanical weeder types exist but little is known about locally specific differences in performance and farmer preference between these types. Three to six different weeder types were evaluated at 10 different sites across seven countries – i.e., Benin, Burkina Faso, Côte d'Ivoire, Ghana, Nigeria, Rwanda and Togo. A total of 310 farmers (173 male, 137 female) tested the weeders, scored them for their preference, and compared them with their own weed management practices. In a follow-up study, 186 farmers from Benin and Nigeria received the ring hoe, which was the most preferred in these two countries, to use it during the entire crop growing season. Farmers were surveyed on their experiences. The probability of the ring hoe having the highest score among the tested weeders was 71%. The probability of farmers’ preference of the ring hoe over their usual practices – i.e., herbicide, traditional hoe and hand weeding – was 52, 95 and 91%, respectively. The preference of this weeder was not related to gender, years of experience with rice cultivation, rice field size, weed infestation level, water status or soil texture. In the follow-up study, 80% of farmers who used the ring hoe indicated that weeding time was reduced by at least 31%. Of the farmers testing the ring hoe in the follow-up study, 35% used it also for other crops such as vegetables, maize, sorghum, cassava and millet. These results suggest that the ring hoe offers a gender-neutral solution for reducing labour for weeding in rice as well as other crops and that it is compatible with a wide range of environments. The implications of our findings and challenges for out-scaling of mechanical weeders are discussed.

scholarly journals Weed control in soybean (Glycine max L.) through resource management strategies and its influence on yield and nutrient uptake

2017 ◽  
Vol 9 (1) ◽  
pp. 539-543
Author(s):  
Aradhana Bali ◽  
B. R. Bazaya ◽  
Sandeep Rawal
Keyword(s):  
Resource Management ◽  
Nutrient Uptake ◽  
Weed Control ◽  
Weed Management ◽  
Management Strategies ◽  
Climatic Conditions ◽  
Glycine Max L ◽  
Effect On Yield ◽  
Hand Weeding ◽  
Quizalofop Ethyl

A field experiment was conducted during kharif season of 2011 at Research Farm, Sher-e-Kashmir University of Agricultural Sciences and Technology, Chatha, Jammu to evaluate the effect of weed management prac-tices on yield and nutrient uptake of soybean utilizing different resource management strategies. The lowest weed density and dry matter of weeds was recorded with hand weeding at 15 and 35 days after sowing (DAS) which was equally effective as imazethapyr @ 75 g ha -1 (PoE) fb hoeing at 35 DAS and quizalofop-ethyl @ 40 g ha-1 (PoE) fb hoeing at 35 DAS. All weed control treatments had significant effect on yield and nutrient up-take of soybean. Among the different weed control treatments, lowest N, P and K uptake by weeds were recorded in hand-weeding (15 and 35 DAS) which was statistically at par with imazethapyr @ 75 g ha -1 fb hoeing at 35 DAS. The maximum uptake by seed and straw were recorded in weed free which was statistically at par with twice hand weeding at 15 and 35 DAS, imazethapyr @ 75 g ha-1 fb hoeing at 35 DAS and quizalofop-ethyl @ 40 g ha-1 fb hoeing at 35 DAS. The highest seed and straw yield of soybean was harvested with hand-weeding (15 and 35 DAS) followed by imazethapyr @ 75 g ha -1 fb hoeing at 35 DAS. For the first time, soybean crop has been introduced in Jammu region for research purpose. Weed management varies with agro-climatic conditions. The study would be helpful to understand weed menace in this particular climatic condition of Jammu and to manage them combinedly and efficiently.

Weed management practices in glyphosate-tolerant and conventional cotton fields in Australia

2006 ◽  
Vol 46 (9) ◽  
pp. 1177 ◽  
Author(s):  
J. A. Werth ◽  
C. Preston ◽  
G. N. Roberts ◽  
I. N. Taylor
Keyword(s):  
Weed Control ◽  
Weed Management ◽  
Management Practices ◽  
Herbicide Application ◽  
Resistance Development ◽  
Roundup Ready ◽  
Use Patterns ◽  
Management Techniques ◽  
Cotton Fields ◽  
Herbicide Use

Forty growers in 4 major cotton-growing regions in Australia were surveyed in 2003 to investigate how the adoption of glyphosate-tolerant cotton (Roundup Ready) had influenced herbicide use, weed management techniques, and whether changes to the weed spectrum could be identified. The 10 most common weeds reported on cotton fields were the same in glyphosate-tolerant and conventional fields in this survey. Herbicide use patterns were altered by the adoption of glyphosate-tolerant cotton with up to 6 times more glyphosate usage, but 21% fewer growers applying pre-emergence herbicides in glyphosate-tolerant fields. Other weed control practices such as the use of post-emergence herbicides, inter-row cultivation and hand hoeing were only reduced marginally. However, growers indicated that management practices are likely to change over time, especially with the introduction of enhanced glyphosate tolerance technology (Roundup Ready Flex), and anticipate a 32% decrease in the number of growers using alternative weed management practices. To date, management practices other than glyphosate use have not changed markedly in glyphosate-tolerant cotton indicating a conservative approach by growers adopting this technology and reflecting the narrow window of herbicide application. The range of weed control options still being employed in glyphosate-tolerant cotton would not increase the risk of glyphosate resistance development.

Optimizing the Application Time of Pre-emergence Herbicide Pendimethalin and Oxyfluorfen Application for Effective Weed Management in Irrigated Blackgram (Vigna mungo L.) and Its Residue Persistence

2021 ◽  
Author(s):  
S. Selvakumar ◽  
R. Ajaykumar ◽  
A. Ammaiyappan
Keyword(s):  
Field Experiment ◽  
Weed Control ◽  
Weed Management ◽  
Block Design ◽  
Vigna Mungo ◽  
Application Time ◽  
Herbicide Application ◽  
Control Efficiency ◽  
Randomized Block Design ◽  
Weed Control Efficiency

Background: Time of pre-emergence herbicide application is an important factor that decides the efficiency of herbicide. If the pre-emergence herbicide is not applied at appropriate time, it may cause ineffective weed control or toxicity to crops. With this background, a field experiment was conducted at TNAU, Madurai to optimize the time of pre-emergence herbicides namely pendimethalin and oxyfluorfen application for effective weed management in irrigated blackgram. Methods: The experiment was laid out in randomized block design with three replication. Treatments were application of pendimethalin at 0.75 kg ha-1 and oxyfluorfen at 0.2 kg ha-1 on 1, 2, 3, 4 days after sowing, weed free check and unweeded check. Result: Results of the study revealed that oxyfluorfen gave maximum weed control efficiency as compared to pendimethalin, but toxicity to the crop was observed when oxyfluorfen was sprayed after 2 days of sowing. Yield and economics were achieved higher with application of 0.75 kg ha-1 of pendimethalin at 2 DAS, which was on par with application of 0.2 kg ha-1 of oxyfluorfen at 1 DAS due to lesser toxicity. Application of 0.75 kg ha-1 of pendimethalin and 0.2 kg ha-1 of oxyfluorfen didn’t leave any herbicide residue after harvest. Hence, application of 0.75 kg ha-1 of pendimethalin at 2 DAS and 0.2 kg ha-1 of oxyfluorfen at 1 DAS can be recommended for effective weed management in irrigated balckgram.

Effect of Temperature on Clopyralid Safety in Strawberry

2018 ◽  
Vol 32 (3) ◽  
pp. 347-351 ◽  
Author(s):  
Shaun M. Sharpe ◽  
Nathan S. Boyd ◽  
Peter J. Dittmar ◽  
Greg E. MacDonald ◽  
Rebecca L. Darnell
Keyword(s):  
Weed Management ◽  
Growth Chamber ◽  
Effect Of Temperature ◽  
Herbicide Application ◽  
Horticultural Crop ◽  
Randomized Design ◽  
Completely Randomized Design ◽  
Pre Treatment ◽  
Hand Weeding ◽  
Growing Conditions

AbstractStrawberry is an important horticultural crop in Florida. The long growing season and escapes from fumigation and PRE herbicides necessitate POST weed management to maximize harvest potential and efficiency. Alternatives to hand-weeding are desirable, but clopyralid is the only broadleaf herbicide registered for use. Weed control may be improved by early-season clopyralid applications, but at risk of high temperature and increased strawberry injury. The effect of temperature on clopyralid safety on strawberry is unknown. We undertook a growth chamber experiment using a completely randomized design to determine crop safety under various temperature conditions across acclimation, herbicide application, and post-application periods. There was no effect of clopyralid on the number of strawberry leaves across all temperatures. Damage to the strawberry manifested as leaf malformations. Acclimation temperatures affected clopyralid-associated injury (p=0.0309), with increased leaf malformations at higher temperatures (27 C) compared to lower (18 C) temperatures. Pre-treatment temperatures did not affect clopyralid injury. Post-application temperature also affected clopyralid injury (p=0.0161), with increased leaf malformations at higher temperatures compared to lower ones. Clopyralid application did not reduce flowering or biomass production in the growth chamber. If leaf malformations are to be avoided, consideration to growing conditions prior to application is advisable, especially if applying clopyralid early in the season.

scholarly journals Weed Management in Cranberries: A Historical Perspective and a Look to the Future

Agriculture ◽  
2018 ◽  
Vol 8 (9) ◽  
pp. 138 ◽  
Author(s):  
Hilary Sandler
Keyword(s):  
Weed Control ◽  
Precision Agriculture ◽  
Weed Management ◽  
Management Practices ◽  
Integrated Weed Management ◽  
Unmanned Aerial Systems ◽  
Early 19Th Century ◽  
Research Areas ◽  
Hand Weeding ◽  
The Impact

Integrated weed management (IWM) has been part of cranberry cultivation since its inception in the early 19th century. Proper site and cultivar selection, good drainage, rapid vine establishment, and hand weeding are as important now for successful weed management as when the industry first started. In 1940, Extension publications listed eight herbicides (e.g., petroleum-based products, inorganic salts and sulfates) for weed control. Currently, 18 herbicides representing 11 different modes of action are registered for use on cranberries. Nonchemical methods, such as hand weeding, sanding, flooding, and proper fertilization, remain integral for managing weed populations; new tactics such as flame cultivation have been added to the toolbox. Priority ratings have been developed to aid in weed management planning. Despite many efforts, biological control of weeds remains elusive on the commercial scale. Evaluation of new herbicides, unmanned aerial systems (UAS), image analysis, and precision agriculture technology; investigation of other management practices for weeds and their natural enemies; utilization of computational decision making and Big Data; and determination of the impact of climate change are research areas whose results will translate into new use recommendations for the weed control of cranberry.

scholarly journals Status quo of chemical weed control in rice in sub-Saharan Africa

Food Security ◽  
2019 ◽  
Vol 11 (1) ◽  
pp. 69-92 ◽  
Author(s):  
Jonne Rodenburg ◽  
Jean-Martial Johnson ◽  
Ibnou Dieng ◽  
Kalimuthu Senthilkumar ◽  
Elke Vandamme ◽  
...  
Keyword(s):  
Weed Control ◽  
Status Quo ◽  
Sub Saharan Africa ◽  
Sub Saharan

Weed Control Efficacy and Pinto Bean (Phaseolus vulgaris) Tolerance to Early Season Mechanical Weeding

1995 ◽  
Vol 9 (3) ◽  
pp. 531-534 ◽  
Author(s):  
Mark J. Vangessel ◽  
Lori J. Wiles ◽  
Edward E. Schweizer ◽  
Phil Westra
Keyword(s):  
Phaseolus Vulgaris ◽  
Weed Control ◽  
Weed Management ◽  
Seed Weight ◽  
Growth Stage ◽  
Integrated Approach ◽  
Growth Stages ◽  
Weed Species ◽  
Control Efficacy ◽  
Pinto Bean

An integrated approach to weed management in pinto bean is needed since available herbicides seldom adequately control all weed species present in a field. A two-year study was conducted to assess weed control efficacy and pinto bean tolerance to mechanical weeding from a rotary hoe or flex-tine harrow at crook, unifoliolate, and trifoliolate stages of bean development. Weed control was similar for both implements and all timings in 1993. In 1994, mechanical weeding at trifoliolate and both crook and trifoliolate stages controlled more weeds than at other growth stages, regardless of type of implement. Using the flex-tine harrow reduced pinto bean stand, but results based on growth stage were not consistent each year. Damage to pinto bean hypocotyls and stems was observed with the flex-tine harrow used at both crook and trifoliolate stages in 1994. Rotary hoeing did not reduce pinto bean stand or cause injury. Yield and seed weight did not differ among treatments in either year.

Sign in / Sign up

Export Citation Format

Share Document