PROCESS OF FORMATION OF SPHEROIDAL GOLD PARTICLES AND OF NANOPHASES IN AlN-TiB2-TiSi2 COATINGS AFTER ANNEALING WITH SUBSEQUENT IMPLANTATION

2015 ◽  
Vol 19 (2) ◽  
pp. 189-200 ◽  
Author(s):  
Artem Demianenko ◽  
Katerina Smyrnova ◽  
Bahyt Zhollybekov ◽  
Anatoliy Kupchishin ◽  
Yoshihiko Takeda ◽  
...  
Keyword(s):  
Gold Particles

Ultrastructural analysis of the spatial distribution of MRNA

1992 ◽  
Vol 50 (1) ◽  
pp. 552-553
Author(s):  
Gary Bassell ◽  
Robert H. Singer
Keyword(s):  
Electron Microscopy ◽  
Spatial Distribution ◽  
In Situ Hybridization ◽  
High Resolution ◽  
Nucleic Acids ◽  
Colloidal Gold ◽  
Dna Probe ◽  
Nucleotide Analogs ◽  
Gold Particles

We have been investigating the spatial distribution of nucleic acids intracellularly using in situ hybridization. The use of non-isotopic nucleotide analogs incorporated into the DNA probe allows the detection of the probe at its site of hybridization within the cell. This approach therefore is compatible with the high resolution available by electron microscopy. Biotinated or digoxigenated probe can be detected by antibodies conjugated to colloidal gold. Because mRNA serves as a template for the probe fragments, the colloidal gold particles are detected as arrays which allow it to be unequivocally distinguished from background.

Quantification of cell-surface expressed antigenic sites with 5-nm gold markers: Getting close to biologically relevant data

1989 ◽  
Vol 47 ◽  
pp. 1050-1051
Author(s):  
Etienne de Harven ◽  
Hilary Christensen ◽  
Richard Leung ◽  
Cameron Ackerley
Keyword(s):  
Cell Surface ◽  
Human Peripheral Blood ◽  
Contour Length ◽  
Thin Sections ◽  
Gold Particles ◽  
Biologically Relevant ◽  
Transmission Electron ◽  
Entire Cell ◽  
Electron Imaging ◽  
Cell Contour

The T-derived subset of human peripheral blood normal lymphocytes has been selected as a model system to study the usefulness of 5 nm gold markers for quantification of single epitopes expressed on cell surfaces. The chosen epitopes are parts of the CD3 and CD5 molecules and can be specifically identified by hybridoma produced monoclonal antibodies (MoAbs; LEU-4 and LEU-1; Becton-Dick- inson, Mountain view, CA) . An indirect immunolabeling procedure, with goat anti-murine IgG adsorbed on the surface of 5 nm colloidal gold particles (GAM-G5, Janssen Pharmaceutica, Beerse, Belgium) has been used. Backscattered Electron Imaging (BEI) in a field emission scanning electronmicroscope (SEM) and transmission electron microscopy of thin sections of lymphocytes labeled before plastic embedding, were both used to identify and quantitate gold labeled cell surface sites, Estimating that the thickness of “silver” sections is approximately 60 nm and counting the number of gold particles on the entire cell perimeter, we calculated that, for LEU-4, the number of markers per um2 of cell surface is in the 140-160 range (Fig.l). Cell contour length measurements indicated that the surface of one lymphocyte is approximately 130-160 um2 that of a smooth sphere of identical diameter, reflecting the role of microvilli in expanding the surface area. The total number of gold labeled sites on the surface of one lymphocyte averages, therefore between 20,000 and 24,000 per cell.

Immunocytochemical localization of p65 with one-nanometer gold particles following silver development

1989 ◽  
Vol 47 ◽  
pp. 1042-1043
Author(s):  
Richard W. Burry ◽  
Diane M. Hayes
Keyword(s):  
Plasma Membrane ◽  
Bovine Serum Albumin ◽  
Calf Serum ◽  
Specific Protein ◽  
Immunocytochemical Localization ◽  
Electron Microscopic ◽  
Gold Particles ◽  
Pass Through ◽  
Label Distribution ◽  
Phosphate Buffered Saline

Electron microscopic (EM) immunocytochemistry localization of the neuron specific protein p65 could show which organelles contain this antigen. Antibodies (Ab) labeled with horseradish peroxidase (HRP) followed by chromogen development show a broad diffuse label distribution within cells and restricting identification of organelles. Particulate label (e.g. 10 nm colloidal gold) is highly desirable but not practical because penetration into cells requires destroying the plasma membrane. We report pre-embedding immunocytochemistry with a particulate marker, 1 nm gold, that will pass through membranes treated with saponin, a mild detergent.Cell cultures of the rat cerebellum were fixed in buffered 4% paraformaldehyde and 0.1% glutaraldehyde (Glut.). The buffer for all incubations and rinses was phosphate buffered saline with: 1% calf serum, 0.2% saponin, 0.1% gelatin, 50 mM glycine 1 mg/ml bovine serum albumin, and (not in the HRP labeled cultures) 0.02% sodium azide. The monoclonal #48 to p65 was used with three label systems: HRP, 1 nm avidin gold with IntenSE M development, and 1 nm avidin gold with Danscher development.

Crystal structure-size relationship in ultrafine metallic particles

1989 ◽  
Vol 47 ◽  
pp. 266-267
Author(s):  
Jun Liu ◽  
Mehmet Sarikaya ◽  
Ilhan A. Aksay
Keyword(s):  
Ultrafine Particles ◽  
Carbon Film ◽  
Lattice Defects ◽  
Careful Examination ◽  
Seeded Growth ◽  
Gold Particles ◽  
Metallic Particles ◽  
Interfacial Structures ◽  
Typical Particle ◽  
Many Particles

Ultrafine particles usually have unique physical properties. This study illustrates how the lattice defects and interfacial structures between particles are related to the size of ultrafine crystalline gold particles.Colloidal gold particles were produced by reducing gold chloride with sodium citrate at 100°C. In this process, particle size can be controlled by changing the concentration of the reactant. TEM samples are prepared by transferring a small amount of solution onto a thin (5 nm) carbon film which is suspended on a copper grid. In this work, all experiments were performed with Philips 430T at 300 kV.With controlled seeded growth, particles of different sizes are produced, as shown in Figure 1. By a careful examination, it can be resolved that very small particles have lattice defects with complex interfaces. Some typical particle structures include multiple twins, resulting in a five-fold symmetry bicrystals, and highly disordered regions. Many particles are too complex to be described by simple models.

Improved immunolabelling of ultrathin cryosections using antibody conjugated with 1nm gold particles

1990 ◽  
Vol 48 (3) ◽  
pp. 928-929
Author(s):  
Morten H. Nielsen ◽  
Lone Bastholm
Keyword(s):  
Pituitary Gland ◽  
Liquid Nitrogen ◽  
Electron Density ◽  
Small Diameter ◽  
Cytochemical Staining ◽  
Gold Particles ◽  
Labelling Density ◽  
Ultrathin Cryosections ◽  
Mouse Pituitary ◽  
Electron Microscopical

During the last 5 years the diameter of the gold probes used for immuno-cytochemical staining at the electron microscopical (EM) level has been decreased. The advantage of small diameter gold probes is an overall increased labelling density. The disadvantage is a lower detectability due to the low electron density of smaller gold particles consequently an inconvenient high primary magnification needed for EM examination. Since 1 nm gold particles are barely visible by conventional EM examination the need for enlargement by silverenhancement of the gold particles has increased.In the present study of ultrathin cryosectioned material the results of immunostaining using 5 nm gold conjugated antibody and 1 nm gold conjugated antibodies are compared after silverenhancement of the 1 nm gold particles.Slices of freshly isolated mouse pituitary gland were immersion fixed for 20 min in 2 % glutaraldehyde /2 % paraformaldehyde. Blocks cryoprotected with 2.3 M sucrose were frozen in liquid nitrogen and ultra-cryosectioned on a RMC cryoultra-microtome.

Specificity of Lectins Labeled with Colloidal Gold to the Exopolymeric Matrix Carbohydrates of the Sulfate-Reducing Bacteria Biofilm Formed on Steel

2020 ◽  
Vol 82 (5) ◽  
pp. 11-20
Author(s):  
D.R. Abdulina ◽  
◽  
L.M. Purish ◽  
G.O. Iutynska ◽  
◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Colloidal Gold ◽  
Steel Surface ◽  
Lectin Binding ◽  
Sulfate Reducing Bacteria ◽  
Gold Particles ◽  
Sulfate Reducing ◽  
Transmission Electron ◽  
Reducing Bacteria

The studies of the carbohydrate composition of the sulfate-reducing bacteria (SRB) biofilms formed on the steel surface, which are a factor of microbial corrosion, are significant. Since exopolymers synthesized by bacteria could activate corrosive processes. The aim of the study was to investigate the specificity of commercial lectins, labeled with colloidal gold to carbohydrates in the biofilm exopolymeric matrix produced by the corrosive-relevant SRB strains from man-caused ecotopes. Methods. Microbiological methods (obtaining of the SRB biofilms during cultivation in liquid Postgate B media under microaerophilic conditions), biochemical methods (lectin-binding analysis of 10 commercial lectins, labeled with colloidal gold), transmission electron microscopy using JEM-1400 JEOL. Results. It was shown using transmission electron microscopy that the binding of lectins with carbohydrates in the biofilm of the studied SRB strains occurred directly in the exopolymerіс matrix, as well as on the surfaces of bacterial cells, as seen by the presence of colloidal gold particles. For detection of the neutral carbohydrates (D-glucose and D-mannose) in the biofilm of almost all studied bacterial strains PSA lectin was the most specific. This lectin binding in biofilms of Desulfotomaculum sp. К1/3 and Desulfovibrio sp. 10 strains was higher in 90.8% and 94.4%, respectively, then for ConA lectin. The presence of fucose in the SRB biofilms was detected using LABA lectin, that showed specificity to the biofilm EPS of all the studied strains. LBA lectin was the most specific to N-аcetyl-D-galactosamine for determination of amino sugars in the biofilm. The amount of this lectin binding in D. vulgaris DSM644 biofilm was 30.3, 10.1 and 9.3 times higher than SBA, SNA and PNA lectins, respectively. STA, LVA and WGA lectins were used to detect the N-acetyl-Dglucosamine and sialic acid in the biofilm. WGA lectin showed specificity to N-acetyl-D-glucosamine in the biofilm of all the studied SRB; maximum number of bounded colloidal gold particles (175 particles/μm2) was found in the Desulfotomaculum sp. TC3 biofilm. STA lectin was interacted most actively with N-acetyl-D-glucosamine in Desulfotomaculum sp. TC3 and Desulfomicrobium sp. TC4 biofilms. The number of bounded colloidal gold particles was in 9.2 and 7.4 times higher, respectively, than using LVA lectin. The lowest binding of colloidal gold particles was observed for LVA lectin. Conclusions. It was identified the individual specificity of the 10 commercial lectins to the carbohydrates of biofilm matrix on the steel surface, produced by SRB. It was estimated that lectins with identical carbohydrates specificity had variation in binding to the biofilm carbohydrates of different SRB strains. Establishing of the lectin range selected for each culture lead to the reduction of the scope of studies and labor time in the researching of the peculiarities of exopolymeric matrix composition of biofilms formed by corrosiverelevant SRB.

Electron Holographic Nano-Characterization of Gold Catalyst at Interface

2002 ◽  
Vol 727 ◽  
Author(s):  
S. Ichikawa ◽  
T. Akita ◽  
M. Okumura ◽  
M. Haruta ◽  
K. Tanaka
Keyword(s):  
Contact Angle ◽  
Titanium Oxide ◽  
Gold Catalyst ◽  
Three Dimensional ◽  
High Resolution Electron Microscopy ◽  
Electron Holography ◽  
Gold Particles ◽  
Oxide Support ◽  
The Mean ◽  
A Charge

AbstractThe catalytic properties of nanostructured gold catalyst are known to depend on the size of the gold particles and to be activated when the size decreases to a few nanometers. We investigated the size dependence of the three-dimensional nanostructure on the mean inner potential of gold catalysts supported on titanium oxide using electron holography and high-resolution electron microscopy (HREM). The contact angle of the gold particles on the titanium oxide tended to be over 90° for gold particles with a size of over 5 nm, and below 90° for a size of below 2 nm. This decreasing change in the contact angle (morphology) acts to increase the perimeter and hence the area of the interface between the gold and titanium oxide support, which is considered to be an active site for CO oxidation. The mean inner potential of the gold particles also changed as their size decreased. The value of the inner potential of gold, which is approximately 25 V in bulk state, rose to over 40 V when the size of the gold particles was less than 2 nm. This phenomenon indicates the existence of a charge transfer at the interface between gold and titanium oxide. The 3-D structure change and the inner potential change should be attributed to the specific electronic structure at the interface, owing to both the “nano size effect” and the “hetero-interface effect.”

Development of composite nanoparticles composed of silica-coated nanorods and single nanometer-sized gold particles toward a novel X-ray contrast agent

2020 ◽  
Vol 262 ◽  
pp. 114716
Author(s):  
Tomoya Inose ◽  
Takahiro Oikawa ◽  
Masayuki Tokunaga ◽  
Noriko Yamauchi ◽  
Kouichi Nakashima ◽  
...  
Keyword(s):  
Contrast Agent ◽  
Composite Nanoparticles ◽  
Gold Particles ◽  
X Ray

scholarly journals Gold and ZnO-Based Metal-Semiconductor Network for Highly Sensitive Room-Temperature Gas Sensing

Sensors ◽  
2019 ◽  
Vol 19 (18) ◽  
pp. 3815
Author(s):  
Renyun Zhang ◽  
Magnus Hummelgård ◽  
Joel Ljunggren ◽  
Håkan Olin
Keyword(s):  
Solar Cells ◽  
Gas Sensor ◽  
Network Structure ◽  
Room Temperature ◽  
Gas Sensing ◽  
Zno Nanowires ◽  
Gold Particles ◽  
Highly Sensitive ◽  
Semiconductor Electronics ◽  
New Type

Metal-semiconductor junctions and interfaces have been studied for many years due to their importance in applications such as semiconductor electronics and solar cells. However, semiconductor-metal networks are less studied because there is a lack of effective methods to fabricate such structures. Here, we report a novel Au–ZnO-based metal-semiconductor (M-S)n network in which ZnO nanowires were grown horizontally on gold particles and extended to reach the neighboring particles, forming an (M-S)n network. The (M-S)n network was further used as a gas sensor for sensing ethanol and acetone gases. The results show that the (M-S)n network is sensitive to ethanol (28.1 ppm) and acetone (22.3 ppm) gases and has the capacity to recognize the two gases based on differences in the saturation time. This study provides a method for producing a new type of metal-semiconductor network structure and demonstrates its application in gas sensing.

Sign in / Sign up

Export Citation Format

Share Document