Custom-Made Cement-Linked Distal Femoral Replacement for Interprosthetic Femur Fractures: Five-Year Follow-Up

2018 ◽  
Vol 28 (2) ◽  
pp. 119-123
Author(s):  
Hosam E. Matar ◽  
Paula Stritch ◽  
Nicholas Emms
Keyword(s):  
Femur Fractures ◽  
Custom Made ◽  
Distal Femoral Replacement

Distal Femoral Replacement for Fractures Allows for Early Mobilization with Low Complication Rates: A Multicenter Review

2021 ◽  
Author(s):  
Ryan Stancil ◽  
Jacob Romm ◽  
William Lack ◽  
Frank Bohnenkamp ◽  
Stephen Sems ◽  
...  
Keyword(s):  
Femoral Component ◽  
Patient Population ◽  
Weight Bearing ◽  
Early Mobilization ◽  
High Energy ◽  
Complication Rates ◽  
Femur Fractures ◽  
Fracture Nonunions ◽  
Distal Femoral Replacement

AbstractPeriprosthetic fractures around a total knee arthroplasty (TKA), comminuted and intra-articular femur fractures, or fracture nonunions in osteoporotic bone represent technically challenging problems. This is particularly true when the fracture involves a loose femoral component or the pattern results in suboptimal fixation potential. These clinical indications often arise in an older and comorbid patient population in whom a principal goal of treatment includes allowing for early mobilization. Limited data indicate that arthroplasty via distal femoral replacement (DFR) is a reasonable alternative to open reduction and internal fixation, allowing for early ambulation with low complication rates. We performed a retrospective review of trauma and arthroplasty surgeries at three tertiary referral institutions. Adult patients treated for the above with a DFR were included. Patients with active infection, open and/or high-energy injuries and revisions unrelated to fracture were excluded. Patient demographics, treatment details, and outcomes were assessed. Between 2002 and 2017, 90 DFR's were performed for the above indications with a mean follow-up of 24 months. Postoperatively, 80 patients (88%) were allowed to weight bear as tolerated, and at final follow-up, 9 patients (10%) remained dependent on a wheelchair. The average arc of motion at final follow-up was 95 degrees. There were seven (8%) implant-related complications requiring secondary surgeries: two infections, one with associated component loosening; one fracture of the hinge mechanism and one femoral component failure in conjunction with a patellofemoral dislocation (both requiring revision); one case of patellofemoral arthrosis in a patient with an unresurfaced patella; one periprosthetic fracture with associated wound dehiscence; and one case of arthrofibrosis. In each of these cases, only modular components of the DFR were exchanged. All nonmodular components cemented into the femur or tibia were retained. DFR provides a viable reconstruction option in the treatment of acute distal femur fractures, periprosthetic femur fractures, and fracture nonunions. We noted that in an elderly patient population with high comorbidities, the complication and secondary surgery rates remained relatively low, while allowing for immediate weight bearing.

Emergent Triple-Branched TEVAR and Redistribution of the Branches to the Supra-Aortic Target Vessels for Treatment of a Contained Ruptured Descending Aortic Aneurysm Associated With a Chronic Type A Aortic Dissection

2021 ◽  
pp. 152660282098527
Author(s):  
Jan Stana ◽  
Carlota Fernandes Prendes ◽  
Ramin Banafsche ◽  
Nikolaos Konstantinou ◽  
Barbara Rantner ◽  
...  
Keyword(s):  
False Lumen ◽  
Type A ◽  
Emergency Setting ◽  
Chronic Type ◽  
Type A Aortic Dissection ◽  
Custom Made ◽  
Descending Aortic Aneurysm ◽  
Type A Dissection ◽  
Open Surgical Approach

Purpose: To demonstrate the feasibility of urgent endovascular treatment of a chronic type A dissection and contained rupture of the false lumen using a noncustomized triple-branched arch endograft, which necessitated reassignment of the branches to the supra-aortic vessels. Case Report:: A 57-year-old patient with a contained rupture of the descending thoracic aorta, in the setting of a chronic type A dissection and a maximum aortic diameter of 85 mm, was converted to endovascular repair after failure of an open surgical approach. A custom-made triple-branched arch endograft designed for another patient was employed, with concomitant occlusion of the false lumen using a Candy Plug occluder. To adjust the graft’s configuration to the patient’s anatomy, the supra-aortic vessels were not assigned to the originally planned branches. The 12-month follow-up angiography demonstrated a satisfactory result. Conclusion: A noncustomized triple-branched arch endograft can be used in an emergency setting to treat chronic type A dissection, reassigning the branches to the supra-aortic vessels as needed.

scholarly journals Good results at 2-year follow-up of a custom-made triflange acetabular component for large acetabular defects and pelvic discontinuity: a prospective case series of 50 hips

2021 ◽  
pp. 1-7
Author(s):  
Marieke Scharff-Baauw ◽  
Miranda L Van Hooff ◽  
Gijs G Van Hellemondt ◽  
Paul C Jutte ◽  
Sjoerd K Bulstra ◽  
...  
Keyword(s):  
Acetabular Component ◽  
Case Series ◽  
Pelvic Discontinuity ◽  
Custom Made ◽  
Prospective Case Series ◽  
Acetabular Defects

Aortic Remodeling After Custom-Made Candy-Plug for Distal False Lumen Occlusion in Aortic Dissection

2021 ◽  
pp. 152660282199672
Author(s):  
Ahmed Eleshra ◽  
Fiona Rohlffs ◽  
Konstantinos Spanos ◽  
Giuseppe Panuccio ◽  
Franziska Heidemann ◽  
...  
Keyword(s):  
Aortic Dissection ◽  
Clinical Success ◽  
False Lumen ◽  
High Rate ◽  
Single Center ◽  
Original Design ◽  
Mortality And Morbidity ◽  
Custom Made ◽  
Aortic Remodeling

Purpose: To report a single-center experience with the use of a custom-made Candy-Plug (CP) for distal false-lumen (FL) occlusion in subacute and chronic aortic dissection (AD). Materials and Methods: A retrospective single-center analysis was conducted on consecutive patients with subacute and chronic AD who were treated with a custom-made CP for distal FL occlusion using 3 design generations (CP I to CP III) from October 2013 to September 2019. Results: A custom-made CP was used in 57 patients. Of these, 34 patients (29 males, mean age 62±10 years) were treated with a CP I vs 23 patients (16 males, mean age 59±17 years) with CP II/III. Technical success was achieved in 57 (100%) patients. Clinical success was achieved in 54 (95%) patients; 33 (97%) in CP I group vs 21 (91%) patients in CP II/III group, p=0.116. The mean hospital stay was 10±8 days (9±5 days in CP I group vs 13±9 days in CP II/III, p=0.102). The 30-day computed tomography angiography (CTA) confirmed successful CP placement at the intended level in all patients within both groups. Early complete FL occlusion was achieved in 50 (88%) patients; 30 (88%) patients in CP I group vs 20 (87%) in CP II/III group, p=0.894. Follow up CTA was available in 44 (77%) patients. Of these; 30/34 (88%) patients in CP I group with mean follow-up 29±17 months) vs. 14/23 (61%) patients with mean follow-up 14±5 months in CP II/III group. Thoracic aortic remodeling was achieved in 34/44 (77%) patients; 25/30 (83%) patients in CP I group vs 9/14 (64%) patients in CP II/III group, p=0.197. The aneurysm size remained stable in 9/44 (20%) patients; 5/30 (17%) patients in CP I group vs 4/14 (29%) patients in CP II/III group, p=0.741. The thoracic aneurysm increased size was seen in 1/44 (2%) patient. This patient was in CPII/III group. Conclusion: CP technique using custom-made devices is technically feasible with a low mortality and morbidity, and a high rate of aortic remodeling. Both, the original design (CP I) and newer designs with a self-closing central sleeve (CP II and CP III) showed similar excellent outcomes.

scholarly journals A Protocol for the Use of a Combined Microvascular Free Flap with Custom-Made 3D-Printed Total Temporomandibular Joint (TMJ) Prosthesis for Mandible Reconstruction in Children

2021 ◽  
Vol 11 (5) ◽  
pp. 2176
Author(s):  
Krzysztof Dowgierd ◽  
Rafal Pokrowiecki ◽  
Maciej Borowiec ◽  
Marcin Kozakiewicz ◽  
Dominika Smyczek ◽  
...  
Keyword(s):  
Temporomandibular Joint ◽  
Soft Tissues ◽  
Total Joint Replacement ◽  
Speech Development ◽  
Functional Requirements ◽  
Immediate Reconstruction ◽  
Congenital Deformities ◽  
Custom Made ◽  
Masticatory System

Extended postoperative mandibular reconstructions due to orofacial disease involving the temporomandibular joint (TMJ) in immature patients remain a challenge as a result of ongoing growth, which is usually affected by the disease and treatment. Current reconstructive techniques based fully on alloplastic total joint replacement fail to meet fully the anatomical and functional requirements for the masticatory system and speech development. Fourteen children aged 12.6 ± 2.6 with tumors or congenital deformities affecting the mandible and TMJ were included in the study. Radical surgical treatment according to our own protocol was performed through microvascular anastomotic flap reconstruction of the soft tissues and bones, together with total TMJ custom replacements. Follow-up lasted 2–6 years. During the follow-up, increases in the mandible body (13% growth) and ramus (12% growth) were observed, both of which were related (p < 0.001). This is the first report concerning the immediate reconstruction of the mandible with ramus and total TMJ in children and adolescents that combines a free vascularized graft and total individual prosthesis of the TMJ. The presented technique enabled optimal function of the TMJ, growth of the mandible, and further rehabilitation of the patients. The technique was demonstrated to be safe, reliable, and provide good functional and cosmetic outcomes.

scholarly journals Custom-Made 3D-Printed Implants as Novel Approach to Reconstructive Surgery after Oncologic Resection in Pediatric Patients

2021 ◽  
Vol 10 (5) ◽  
pp. 1056
Author(s):  
Giovanni Beltrami ◽  
Gabriele Ristori ◽  
Anna Maria Nucci ◽  
Alberto Galeotti ◽  
Angela Tamburini ◽  
...  
Keyword(s):  
Pediatric Patients ◽  
Soft Tissues ◽  
Lower Limbs ◽  
Host Bone ◽  
Limb Salvage Surgery ◽  
Musculoskeletal Tumor ◽  
Musculoskeletal Tumor Society ◽  
Custom Made ◽  
3D Printed

Recently, custom-made 3D-printed prostheses have been introduced for limb salvage surgery in adult patients, but their use has not been described in pediatric patients. A series of 11 pediatric patients (mean age 10.8 years; range 2–13) with skeletal tumors treated with custom-made implants for the reconstruction of bony defects is described. Patients were followed up every 3 months. Functional results were evaluated by the Musculoskeletal Tumor Society Score (MSTS) for upper and lower limbs. The mean follow-up was 25.7 months (range 14–44). Three patients died after a mean of 19.3 months postoperatively—two because of disease progression and the other from a previous malignancy. Three patients experienced complications related to soft tissues. One patient required device removal, debridement, and antibiotic pearls for postoperative infection. Partial osseointegration between grafts and host bone was observed within a mean of 4 months. At the final follow-up, mean MSTS score was 75%. 3D prostheses may yield biological advantages due to possible integration with the host bone and also through the use of vascularized flaps. Further research is warranted.

Treatment of a type Ia endoleak following EVAR using a custom-made inner branch device.

Vascular ◽  
2021 ◽  
pp. 170853812110627
Author(s):  
Gino Gemayel GG ◽  
Michel Montessuit MM ◽  
Anouche Gemayel GA
Keyword(s):  
Abdominal Aortic Aneurysm ◽  
Open Surgery ◽  
Type I ◽  
Novel Technology ◽  
Abdominal Aortic ◽  
Custom Made ◽  
Type Ia ◽  
Type I Endoleak ◽  
Aortic Cuff

Objectives We represent two cases of late proximal type I endoleak following EVAR with aneurysm expansion that were treated with a custom-made graft with inner branches. Methods Two patients of 87 and 82 years old were operated by EVAR 6 and 8 years ago for abdominal aortic aneurysm. Both had proximal type I endoleak with aneurysm sac expansion. Open surgery had a high risk, and a proximal aortic extension with a simple aortic cuff was not possible neither because previous EVAR grafts were already at the level of the renal arteries. A custom-made endograft with inner branches was planned as a fenestrated graft was not technically possible. Results We successfully treated both patients using a custom-made graft with four inner branches from Jotec (Cryolife, Kennesaw, GA). Three months’ follow-up CT scan did not show any endoleaks. All target vessels were patent with good conformability of the bridging stents. Conclusion The treatment of proximal type I endoleak using inner branches’ endografts is feasible. This novel technology might broaden the indications for complex aortic repair in a group of patients where fenestrated endografts are not possible.

scholarly journals Complications in Treatment of 31-A Fractures with Trochanteric Gamma Nail (TGN) Versus Gamma3 Nail (G3N) - A Review of 217 Cases

2016 ◽  
Vol 10 (1) ◽  
pp. 389-395 ◽  
Author(s):  
R. Schupfner ◽  
L.T. Käsmann ◽  
W. Wagner ◽  
A.P. Schulz
Keyword(s):  
Complication Rate ◽  
Statistical Significance ◽  
Gamma Nail ◽  
Consecutive Series ◽  
Related Complication ◽  
Surgical Time ◽  
Adequate Treatment ◽  
Femur Fractures ◽  
Two Generations

Introduction:The aim of this study was to clinically evaluate two generations of intramedullary gamma-nail used in the treatment of 31-A femur fractures.Materials and Methods:In two consecutive series, 117 trochanteric gamma nails (TGN) and 100 Gamma3 nails (G3N) were implanted for the treatment of inter- and subtrochanteric fractures between 2009 and 2011. Clinical and radiological follow-up examinations were assessed. An analysis of surgical time, hemoglobin drop and complications were performed.Results:Average surgical time, fluoroscopy time, haemoglobin drop and length-of-stay (LOS) were similar in both groups. No significant differences were found in surgery-related complications like wound hematomas (p=0,59), abscesses (p=0,38), wound infections (p=0,69) and Cut-outs (p=0,69) between the two groups. The cumulative surgery-related complication rate was higher in the TGN group compared to the G3N group (13,68%vs.8%) but this did not reach statistical significance (p=0,2).Conclusion:Our findings suggest that both TGN and G3N allow adequate treatment of trochanteric fractures with an acceptable complication rate.

scholarly journals Effectiveness of Daily Use of Bilateral Custom-Made Ankle-Foot Orthoses on Balance, Fear of Falling, and Physical Activity in Older Adults: A Randomized Controlled Trial

Gerontology ◽  
2018 ◽  
Vol 65 (3) ◽  
pp. 299-307 ◽  
Author(s):  
Changhong Wang ◽  
Rahul Goel ◽  
Hadi Rahemi ◽  
Qianzi Zhang ◽  
Brian Lepow ◽  
...  
Keyword(s):  
Physical Activity ◽  
Older Adults ◽  
Fear Of Falling ◽  
Controlled Trial ◽  
Foot Orthoses ◽  
Female Age ◽  
Randomized Controlled ◽  
Custom Made ◽  
Ankle Foot Orthoses

Background: Foot problems are prevalent in older adults, which may increase the risk and concern for falls. Ankle-foot orthoses (AFO) have been shown to be effective in the stabilization of lower extremities, but their long-term effectiveness in improving balance and their potential to encourage older adults to become more physically active are still debated. Objective: This randomized controlled trial investigated the effectiveness of daily use of a custom-made AFO on balance, fear of falling, and physical activity in older adults. Study Design: Forty-four older adults with concern about or at risk for falling were randomly allocated to either the control group (CG; 77.3% female, age 75.6 ± 6.5 years, BMI 29.3 ± 6.4) or the intervention group (IG; 63.6% female, age 73.7 ± 6.3 years, BMI = 27.8 ± 4.8). The IG received walking shoes and bilateral custom-made AFO. The CG received only walking shoes. At the baseline and 6-month follow-ups, balance and physical activity were assessed using validated wearable instrumentation and fear of falling was assessed using the Fall Efficacy Scale-International (FES-I). Adherence and acceptability toward wearing the AFO were assessed using self-reported questionnaires at the 6-month follow-up. Results: No significant between-group difference was observed at baseline (p = 0.144–0.882). Compared to baseline and the CG, hip, ankle, and center-of-mass (COM) sways were significantly reduced at the 6-month follow-up in the IG while standing with the feet together during the eyes-open condition (p = 0.005–0.040). Within the IG, the FES-I was reduced significantly (p = 0.036) and there was an increasing trend in the number of walking bouts with a medium effect size (d = 0.52, p = 0.440) compared to baseline. However, there were no significant changes in FES-I and physical activity measures in the CG (p = 0.122–0.894). The reduction in COM sway in the IG was moderately correlated with adherence (r = –0.484, p = 0.047) and strongly correlated with baseline COM sway (r = –0.903, p < 0.001). Conclusion: Results suggest that bilateral custom-made AFO plus walking shoes is effective in improving balance compared to walking shoes alone, and it significantly reduces the fear of falling, with a nonsignificant but noticeable positive trend in physical activity, compared to baseline. The results also suggest that older adults with poor balance at baseline and higher daily adherence to using the AFO will gain more benefit from the AFO intervention.

Sign in / Sign up

Export Citation Format

Share Document