scholarly journals Derivation of target stocking for forests of Norway spruce vegetation zone in Slovakia

2008 ◽  
Vol 53 (No. 8) ◽  
pp. 352-358 ◽  
Author(s):  
M. Moravčík
Keyword(s):  
Norway Spruce ◽  
Natural Regeneration ◽  
Tree Height ◽  
Static Stability ◽  
Vegetation Coverage ◽  
Social Functions ◽  
Ecological Functions ◽  
Vegetation Zone ◽  
Crown Length ◽  
Forest Limit

The present paper deals with derivation of target stocking in forests of Norway spruce vegetation zone. Target stocking in forests with prevailing ecological and social functions is the stocking when the forest fulfils demanded functions in the best way. For forests in the Norway spruce vegetation zone target stocking was derived by original procedures as an optimum stocking in harmonization of demands on the fulfilment of ecological functions (especially erosion control, hydrological and water protection ones), securing static stability and preconditions for the formation and growth of natural regeneration. We investigated the relations between stocking and indicators of static stability (slenderness coefficient and ratio of crown length to tree height), natural regeneration phases, ground and non-wood vegetation coverage and natural regeneration coverage. The most favourable status of these indicators was found out in stocking 0.7 and in the upper forest limit 0.6.

scholarly journals Derivation of target structure for forests of Norway spruce vegetation zone in Slovakia

2008 ◽  
Vol 53 (No. 6) ◽  
pp. 267-277 ◽  
Author(s):  
M. Moravčík
Keyword(s):  
Norway Spruce ◽  
Forest Ecosystems ◽  
Great Part ◽  
Target Structure ◽  
Social Functions ◽  
Vegetation Zone ◽  
Upper Limit ◽  
Basic Objective ◽  
Basic Functions ◽  
Empirical Material

Forests of the Norway spruce altitudinal vegetation zone occur on the upper limit of tree vegetation and they fulfil important ecological and social functions. A great part of these forests are man-made ones with changed age and spatial structure. The basic objective of the care of these forests is improvement or regeneration of their structure so that it will approach the structure of natural and primeval forests. Maximum fulfilment of their basic functions should be ensured in this way. Therefore following the analysis of our own empirical material the target structure of these forests was derived. Outlook target structure was derived so that it would correspond to the state of the most preserved forest ecosystems occurring in the spruce vegetation zone. Achievable target structure was defined for man-made forests with entirely changed structure.

scholarly journals Phenotype features in juvenile populations of Picea abies and their growth

2014 ◽  
Vol 60 (No. 3) ◽  
pp. 96-108
Author(s):  
K. Matějka ◽  
J. Leugner ◽  
V. Krpeš
Keyword(s):  
Picea Abies ◽  
Norway Spruce ◽  
Natural Regeneration ◽  
Tree Height ◽  
Height Growth ◽  
Width Ratio ◽  
Needle Anatomy ◽  
Quantitative Characteristics ◽  
Length Width ◽  
Tree Height Growth

The young populations of Norway spruce (Picea abies) can be evaluated in terms of both variability in the quantitative characteristics and share of different phenotypes according to the needle types. A set of two-years-old seedlings produced in the nursery and several populations of natural regeneration in the Krkono&scaron;e Mts. and the Kru&scaron;n&eacute; hory Mts. were evaluated using the needle anatomy, size and colour. The tree height growth was measured simultaneously. The growth was related to some needle features. Four basic anatomical types of needles were distinguished in the mountain Norway spruce seedlings: flat needles, intermediate needles, inversion type and sclerotized needles. The growth of natural regeneration populations is mainly correlated with the needle width and the <br /> length/width ratio. The population variability according to growth can be related to the variability of some phenotype characteristics. This relationship differs in natural regeneration and planting. &nbsp;

scholarly journals Crown structure of Picea omorika trees in the plantation

2012 ◽  
Vol 64 (2) ◽  
pp. 605-611 ◽  
Author(s):  
M. Krstic ◽  
N. Stavretovic ◽  
V. Isajev ◽  
I. Bjelanovic
Keyword(s):  
Tree Height ◽  
Tree Crown ◽  
Crown Length ◽  
Crown Structure ◽  
Parabolic Function ◽  
Picea Omorika ◽  
Serbian Spruce ◽  
The Relationship ◽  
Total Tree ◽  
Stand Conditions

The study was carried out in Serbian spruce (Picea omorika Panc/Purkyn?) plantations in the western Serbia. The paper presents results of the analysis of crown development. The following elements were analyzed: total tree height, height of the crown base, absolute and relative crown length, maximal crown diameter, coefficient of crown spreading and degree of crown girth. We discuss approaches to the modeling of tree crown growth and development, growing under favorable environmental and stand conditions, without anomalies in development. In order to establish the relationship between analyzed factors, regression analyses were applied. Data fitting was by the analytic method, by the implementation of Prodan?s functions of growth, linear and parabolic function. Received models can be used for the simulation of various growth and developing processes in forest.

scholarly journals Tree crown size as a measure of tree biosocial position in 135-year-old oak (Quercus L.) stand

2016 ◽  
Vol 58 (1) ◽  
pp. 31-42 ◽  
Author(s):  
Katarzyna Kaźmierczak ◽  
Bogna Zawieja
Keyword(s):  
Principal Component ◽  
Tree Height ◽  
Projection Area ◽  
Tree Crown ◽  
Diameter At Breast Height ◽  
Breast Height ◽  
Crown Length ◽  
Pca Method ◽  
Crown Projection Area

AbstractThe paper presents an attempt to apply measurable traits of a tree – crown projection area, crown length, diameter at breast height and tree height for classification of 135-year-old oak (QuercusL.) trees into Kraft classes. Statistical multivariate analysis was applied to reach the aim. Empirical material was collected on sample plot area of 0.75 ha, located in 135-year-old oak stand. Analysis of dimensional traits of oaks from 135-year-old stand allows quite certain classification of trees into three groups: pre-dominant, dominant and co-dominant and dominated ones. This seems to be quite promising, providing a tool for the approximation of the biosocial position of tree with no need for assessment in forest. Applied analyses do not allow distinguishing trees belonging to II and III Kraft classes. Unless the eye-estimation-based classification is completed, principal component analysis (PCA) method provided simple, provisional solution for grouping trees from 135-year-old stand into three over-mentioned groups. Discriminant analysis gives more precise results compared with PCA. In the analysed stand, the most important traits for the evaluation of biosocial position were diameter at breast height, crown projection area and height.

Modeling individual tree height to diameter ratio for Norway spruce and European beech in Czech Republic

Trees ◽  
2016 ◽  
Vol 30 (6) ◽  
pp. 1969-1982 ◽  
Author(s):  
Ram P. Sharma ◽  
Zdeněk Vacek ◽  
Stanislav Vacek
Keyword(s):  
Czech Republic ◽  
Norway Spruce ◽  
Tree Height ◽  
European Beech ◽  
Diameter Ratio ◽  
Individual Tree

scholarly journals Evaluation of the provenance plot “Hrubá Skála” (Northern Bohemia) with grand fir at the age of 36 years

2017 ◽  
Vol 63 (No. 2) ◽  
pp. 75-87 ◽  
Author(s):  
Fulín Martin ◽  
Novotný Petr ◽  
Podrázský Vilém ◽  
Beran František ◽  
Dostál Jaroslav ◽  
...  
Keyword(s):  
Czech Republic ◽  
Norway Spruce ◽  
Coastal Region ◽  
Tree Height ◽  
Douglas Fir ◽  
Stem Volume ◽  
Silver Fir ◽  
The Czech Republic ◽  
The North ◽  
Oregon Cascades

The article aims to evaluate the research provenance plot established in 1980 in locality No. 214 – Hrubá Skála (in the north of the Czech Republic), where nine provenances of grand fir (Abies grandis (Douglas ex D. Don) Lindley) provided in the framework of the International Union of Forest Research Organizations project, and one provenance of grand fir, Norway spruce, silver fir and Douglas-fir from a standard commercial source are tested. We present the results of tree height, stem DBH, stem volume production and health status after 36 years. The results correspond with similar experiments in the Czech Republic and abroad and suggest that grand fir provenances from Vancouver Island (British Columbia, Canada) and the Washington (USA) State coastal region show the best production features, while the Oregon Cascades, Idaho and Montana provenances grow more slowly. Comparison with other tree species indicates that the production of grand fir at the investigated age exceeds the production of both Norway spruce and silver fir, and equalizes or gently exceeds even Douglas-fir.

scholarly journals Breeding value of Norway spruce (Picea abies [L.] Karst.)

2012 ◽  
Vol 50 (No. 1) ◽  
pp. 17-23
Author(s):  
Rożkowski KR
Keyword(s):  
Survival Rate ◽  
Norway Spruce ◽  
Growth Traits ◽  
Block Design ◽  
Basal Area ◽  
Tree Height ◽  
Breeding Value ◽  
Cross Sectional ◽  
Qualitative Traits ◽  
Crown Density

This is the first report on measurements and observations of an experimental plot of 35-year-old Norway spruce, established in 1970 by the Institute of Dendrology at K&oacute;rnik, where progenies of 22 plustrees from the Kłodzko Forest District were planted. The experiment was established in an incomplete block design of 20 families with 3 replications. Survival rate and growth traits determining productivity (plant height or basal area &ndash; stem cross-sectional area at breast height per 1&nbsp;ha) were assessed in several years, and qualitative traits (trunk straightness; degree of natural pruning; thickness, length and angle of branches; crown density; presence of galls caused by the aphids Adelges laricis Vall. and Sacchiphantes viridis Ratz.) were evaluated once in 2001. Analysis of variance revealed significant differences between the half-sib families in survival rate and productivity but no significant differences in qualitative traits. Statistically significant positive correlations were found between trunk straightness at the age of<br />&nbsp;36 years and height of 2-year-old seedlings in the nursery, and between the degree of natural pruning at the age of 36 years and both tree height at the age of 9 years and basal area at the age of 13 years.

scholarly journals The Effect of Crown Social Class on Bark Thickness and Sapwood Moisture Content in Norway Spruce

Forests ◽  
2020 ◽  
Vol 11 (12) ◽  
pp. 1316
Author(s):  
Luka Krajnc ◽  
Jožica Gričar
Keyword(s):  
Social Class ◽  
Moisture Content ◽  
Norway Spruce ◽  
Research Study ◽  
Physiological State ◽  
Tree Height ◽  
Social Classes ◽  
Bark Thickness ◽  
Individual Tree ◽  
The Relationship

The research study examined the effect of tree properties (crown social class, diameter at breast height (DBH), and tree height) on bark thickness (BT) and sapwood moisture content (SMC) in Norway spruce (Picea abies (L.) H. Karst.). Both examined variables were shown to be positively affected by DBH and tree height. The relationship between DBH and SMC varied among crown social classes, while the relationship between DBH and BT was relatively constant across crown social classes. Crown social class had a relatively small effect on BT and SMC, having a more pronounced effect on SMC than on BT. The relationship between tree height and BT did not vary across crown social classes, while the relationship between SMC and tree height was found to change slightly across crown social classes. Measurements of BT and SMC in the field are affordable, fast, and easy to use. Both variables could potentially be used to improve predictions of bark beetle attacks, as they reflect the physiological state of an individual tree.

scholarly journals Static stability of forest stands in the seventh altitudinal vegetation zone in Slovakia

2012 ◽  
Vol 49 (No. 10) ◽  
pp. 474-481 ◽  
Author(s):  
B. Konôpka ◽  
J. Konôpka
Keyword(s):  
Slenderness Ratio ◽  
Static Stability ◽  
Mountain Forest ◽  
Practical Application ◽  
Tatra Mountains ◽  
Forest Stands ◽  
Vegetation Zone ◽  
Site Class ◽  
The Mean ◽  
Empirical Material

Models evaluating static stability (resistance to breaking or uprooting of trees caused by wind, snow or ice) of forest stands in the seventh altitudinal vegetation zone were determined. The empirical material came from 180 research plots (High Tatra and Low Tatra Mountains) established within the research project Research on methods for mountain forest management based on sustainable Development. Static stability was characterized by the slenderness ratio that was calculated from the mean height and diameter of target trees. Then the particular forest stands were categorized with regard to slenderness ratio, mean diameter and absolute site class using either tables or graphic models. Particularly, four static stability classes were made up: 1 &ndash; very good, 2 &ndash; good, 3 &ndash; sufficient, and 4 &ndash; insufficient. Practical application of the models is shown for forest stands grown in the area of Vajskov&aacute; and Lomnist&aacute; valleys.

Sign in / Sign up

Export Citation Format

Share Document