THRUSTER IN THE FLOW: EFFECT OF FLOW ENERGY CONCENTRATION

2019 ◽  
Vol 18 (2) ◽  
pp. 373-378
Author(s):  
Sergei Vassel ◽  
Natalia Vassel ◽  
Natalia Vertiy ◽  
Vladimir Kovalevskii
Keyword(s):  
Energy Concentration ◽  
Flow Effect ◽  
Flow Energy

Energy Concentration by Bluff Bodies—A Particle Image Velocimetry Investigation

2018 ◽  
Vol 141 (6) ◽  
Author(s):  
Eshodarar Manickam Sureshkumar ◽  
Maziar Arjomandi ◽  
Bassam B. Dally ◽  
Benjamin S. Cazzolato ◽  
Mergen H. Ghayesh
Keyword(s):  
Particle Image Velocimetry ◽  
Circular Cylinder ◽  
Bluff Body ◽  
Particle Image ◽  
Transverse Velocity ◽  
Water Channel ◽  
Energy Concentration ◽  
Backward Facing Step ◽  
Flow Energy ◽  
Image Velocimetry

Particle image velocimetry (PIV) of four cylinders with different cross sections were performed in a recirculating water channel at Reynolds numbers of 5000 and 10,000. The cylinders were split into two distinct categories; semicircular and convex-edged triangular (c-triangular) prisms which have a smooth diverging fore-face and a flat, backward facing step aft-face, and a trapezoid which has a flat fore face and a backward-facing step aft-face. The resulting streamwise and transverse velocity vectors (u and v, respectively) were analyzed to provide a qualitative comparison of the bluff body wakes to the circular cylinder, which is the standard upstream stationary body in wake-induced vibration (WIV) energy technology. The Reynolds stresses, turbulent kinetic energy (TKE), mean spanwise vorticity, and the energy in the fluctuating component of the wake were compared. The main findings are: (i) a convex fore-face and a backward-facing step aft face are more effective at converting the flow energy to temporal wake energy (+20%) compared to a circular cylinder, (ii) a trapezoid type shape is less effective at converting flow energy to temporal wake energy (−40%) compared to a circular cylinder, (iii) increasing Reynolds number reduces the efficiency of conversion of upstream flow energy to downstream transverse temporal energy. Utilizing stationary upstream bodies such as the semicircle and the c-triangle can result in concentrating more energy in the fluctuating components for the downstream transversely vibrating bluff body in a WIV system, and hence can realize in more efficient WIV technology.

Investigation on the effect of leading edge tubercles of sweptback wing at low reynolds number

2020 ◽  
Vol 21 (6) ◽  
pp. 621
Author(s):  
Veerapathiran Thangaraj Gopinathan ◽  
John Bruce Ralphin Rose ◽  
Mohanram Surya
Keyword(s):  
Leading Edge ◽  
Reynolds Numbers ◽  
Sweep Angle ◽  
Laminar Separation ◽  
Low Reynolds Numbers ◽  
Flow Energy ◽  
Airplane Wing ◽  
Low Reynolds ◽  
Naca 0015 ◽  
Wing Performance

Aerodynamic efficiency of an airplane wing can be improved either by increasing its lift generation tendency or by reducing the drag. Recently, Bio-inspired designs have been received greater attention for the geometric modifications of airplane wings. One of the bio-inspired designs contains sinusoidal Humpback Whale (HW) tubercles, i.e., protuberances exist at the wing leading edge (LE). The tubercles have excellent flow control characteristics at low Reynolds numbers. The present work describes about the effect of tubercles on swept back wing performance at various Angle of Attack (AoA). NACA 0015 and NACA 4415 airfoils are used for swept back wing design with sweep angle about 30°. The modified wings (HUMP 0015 A, HUMP 0015 B, HUMP 4415 A, HUMP 4415 B) are designed with two amplitude to wavelength ratios (η) of 0.1 & 0.24 for the performance analysis. It is a novel effort to analyze the tubercle vortices along the span that induce additional flow energy especially, behind the tubercles peak and trough region. Subsequently, Co-efficient of Lift (CL), Co-efficient of Drag (CD) and boundary layer pressure gradients also predicted for modified and baseline (smooth LE) models in the pre & post-stall regimes. It was observed that the tubercles increase the performance of swept back wings by the enhanced CL/CD ratio in the pre-stall AoA region. Interestingly, the flow separation region behind the centerline of tubercles and formation of Laminar Separation Bubbles (LSB) were asymmetric because of the sweep.

Monte Carlo calculation of the energy parameters and spatial distribution of the cathodic arc ions while passing through the macro-particles filters

2018 ◽  
Vol 1 (1) ◽  
pp. 30-34 ◽  
Author(s):  
Alexey Chernogor ◽  
Igor Blinkov ◽  
Alexey Volkhonskiy
Keyword(s):  
Magnetic Field ◽  
Mass Transfer ◽  
Monte Carlo ◽  
Monte Carlo Calculation ◽  
Inhomogeneous Magnetic Field ◽  
Flow Energy ◽  
Wide Range ◽  
Field Concentrator ◽  
Cathodic Arc ◽  
The Magnetic Field

The flow, energy distribution and concentrations profiles of Ti ions in cathodic arc are studied by test particle Monte Carlo simulations with considering the mass transfer through the macro-particles filters with inhomogeneous magnetic field. The loss of ions due to their deposition on filter walls was calculated as a function of electric current and number of turns in the coil. The magnetic field concentrator that arises in the bending region of the filters leads to increase the loss of the ions component of cathodic arc. The ions loss up to 80 % of their energy resulted by the paired elastic collisions which correspond to the experimental results. The ion fluxes arriving at the surface of the substrates during planetary rotating of them opposite the evaporators mounted to each other at an angle of 120° characterized by the wide range of mutual overlapping.

scholarly journals Strain Sensitivity Enhancement of Broadband Ultrasonic Signals in Plates Using Spectral Phase Filtering

2021 ◽  
Vol 11 (6) ◽  
pp. 2582
Author(s):  
Lucas M. Martinho ◽  
Alan C. Kubrusly ◽  
Nicolás Pérez ◽  
Jean Pierre von der Weid
Keyword(s):  
Fourier Transform ◽  
Guided Waves ◽  
Strain Level ◽  
Energy Concentration ◽  
Short Time Fourier Transform ◽  
Time Frequency ◽  
Frequency Representation ◽  
The Fourier Transform ◽  
Short Time ◽  
Sensitivity Gain

The focused signal obtained by the time-reversal or the cross-correlation techniques of ultrasonic guided waves in plates changes when the medium is subject to strain, which can be used to monitor the medium strain level. In this paper, the sensitivity to strain of cross-correlated signals is enhanced by a post-processing filtering procedure aiming to preserve only strain-sensitive spectrum components. Two different strategies were adopted, based on the phase of either the Fourier transform or the short-time Fourier transform. Both use prior knowledge of the system impulse response at some strain level. The technique was evaluated in an aluminum plate, effectively providing up to twice higher sensitivity to strain. The sensitivity increase depends on a phase threshold parameter used in the filtering process. Its performance was assessed based on the sensitivity gain, the loss of energy concentration capability, and the value of the foreknown strain. Signals synthesized with the time–frequency representation, through the short-time Fourier transform, provided a better tradeoff between sensitivity gain and loss of energy concentration.

Sign in / Sign up

Export Citation Format

Share Document