The Real World: Rethinking Immigration

1999 ◽  
Vol 21 (2) ◽  
pp. 53-54 ◽  
Author(s):  
Rob Winthrop

Many of us might aspire to become "public intellectuals," standing side-by-side with Noam Chomsky (for those on the left) or Bill Bennett (for those on the right), using the national media to scourge the politicians, guide the journalists, and correct the wayward public. Unfortunately, few are willing to do the requisite heavy lifting, mastering the details of particular policy debates and cultivating contacts with the relevant players, as first steps on the road to this intellectual Valhalla. As the American Anthropological Association's Task Force on Public Policy commented in its January 1998 report: "Cultural ambivalence within AAA is demonstrated in anthropologists' failure to engage in public policy issues on the one hand, and, on the other hand, anthropologists' indignation at not being consulted on policy issues perceived as being related to anthropology."

1949 ◽  
Vol 22 (1) ◽  
pp. 259-262
Author(s):  
J. F. Morley

Abstract These experiments indicate that softeners can influence abrasion resistance, as measured by laboratory machines, in some manner other than by altering the stress-strain properties of the rubber. One possible explanation is that the softener acts as a lubricant to the abrasive surface. Since this surface, in laboratory abrasion-testing machines, is relatively small, and comes repeatedly into contact with the rubber under test, it seems possible that it may become coated with a thin layer of softener that reduces its abrasive power. It would be interesting in this connection to try an abrasive machine in which a long continuous strip of abrasive material was used, no part of it being used more than once, so as to eliminate or minimize this lubricating effect. The fact that the effect of the softener is more pronounced on the du Pont than on the Akron-Croydon machine lends support to the lubrication hypothesis, because on the former machine the rate of wear per unit area of abrasive is much greater. Thus in the present tests the volume of rubber abraded per hr. per sq. cm. of abrasive surface ranges from 0.03 to 0.11 cc. on the du Pont machine and from 0.0035 to 0.0045 cc. on the Akron-Croydon machine. On the other hand, if the softener acts as a lubricant, it would be expected to reduce considerably the friction between the abrasive and the rubber and hence the energy used in dragging the rubber over the abrasive surface. The energy figures given in the right-hand columns of Tables 1 and 3, however, show that there is relatively little variation between the different rubbers. As a test of the lubrication hypothesis, it would be of interest to vary the conditions of test so that approximately the same amount of rubber per unit area of abrasive is abraded in a given time on both machines; this should show whether the phenomena observed under the present test conditions are due solely to the difference in rate of wear or to an inherent difference in the type of wear on the two machines. This could most conveniently be done by considerably reducing the load on the du Pont machine. In the original work on this machine the load was standardized at 8 pounds, but no figures are quoted to show how abrasion loss varies with the load. As an addition to the present investigation, it is proposed to examine the effect of this variation with special reference to rubbers containing various amounts and types of softener. Published data on the influence of softeners on the road wear of tire rubbers do not indicate anything like such large effects as are shown by the du Pont machine. This throws some doubt on the value of this machine for testing tire tread rubbers, a conclusion which is confirmed by information obtained from other workers.


2016 ◽  
Vol 19 (3) ◽  
pp. 432-439
Author(s):  
Melville Saayman ◽  
Waldo Krugell ◽  
Andrea Saayman

The Cape Argus Pick n Pay Cycle Tour is a major event on the road cycling calendar. The majority of cyclists travel significant distances and participation produces a substantial carbon footprint. This paper examines participants’ willingness to pay to offset their carbon footprint. The purpose of this paper is to make a contribution to the literature by linking willingness to pay to attitudes towards or beliefs (green views) about the initiatives in place, to ensure a greener cycle tour. Factor analysis is used to identify different types of cyclists, based on their green views: those with green money, those who prefer green products and the “re-cyclers”. The results of the regression analysis reveal that socio-demographic variables and the right attitude towards the environment are significant predictors of stated willingness to pay for climate change mitigation.


REGION ◽  
2016 ◽  
Vol 3 (2) ◽  
pp. 1 ◽  
Author(s):  
Camilla Lenzi ◽  
Giovanni Perucca

<p>The literature on life satisfaction in transition countries, and in particular on Romania, demonstrated that life satisfaction significantly differs across rural communities and cities of different size. The question addressed in this paper is whether these imbalances are stable over time or, instead, they become manifest in the presence of strong divergences in the economic growth rates of different kinds of communities. Results point out that in the period of sharp economic growth led by large urban areas, as the one experienced by Romania on the road to EU accession, rural/urban disparities in life satisfaction widened, favoring cities of intermediate size.</p>


Author(s):  
S. Mikrut

The UAV technology seems to be highly future-oriented due to its low costs as compared to traditional aerial images taken from classical photogrammetry aircrafts. The AGH University of Science and Technology in Cracow - Department of Geoinformation, Photogrammetry and Environmental Remote Sensing focuses mainly on geometry and radiometry of recorded images. Various scientific research centres all over the world have been conducting the relevant research for years. The paper presents selected aspects of processing digital images made with the UAV technology. It provides on a practical example a comparison between a digital image taken from an airborne (classical) height, and the one made from an UAV level. In his research the author of the paper is trying to find an answer to the question: to what extent does the UAV technology diverge today from classical photogrammetry, and what are the advantages and disadvantages of both methods? The flight plan was made over the Tokarnia Village Museum (more than 0.5 km<sup>2</sup>) for two separate flights: the first was made by an UAV - System FT-03A built by FlyTech Solution Ltd. The second was made with the use of a classical photogrammetric Cesna aircraft furnished with an airborne photogrammetric camera (Ultra Cam Eagle). Both sets of photographs were taken with pixel size of about 3 cm, in order to have reliable data allowing for both systems to be compared. The project has made aerotriangulation independently for the two flights. The DTM was generated automatically, and the last step was the generation of an orthophoto. The geometry of images was checked under the process of aerotriangulation. To compare the accuracy of these two flights, control and check points were used. RMSE were calculated. The radiometry was checked by a visual method and using the author's own algorithm for feature extraction (to define edges with subpixel accuracy). After initial pre-processing of data, the images were put together, and shown side by side. Buildings and strips on the road were selected from whole data for the comparison of edges and details. The details on UAV images were not worse than those on classical photogrammetric ones. One might suppose that geometrically they also were correct. The results of aerotriangulation prove these facts, too. Final results from aerotriangulation were on the level of RMS = 1 pixel (about 3 cm). In general it can be said that photographs from UAVs are not worse than classic ones. In the author's opinion, geometric and radiometric qualities are at a similar level for this kind of area (a small village). This is a very significant result as regards mapping. It means that UAV data can be used in mapping production.


Author(s):  
Peter Kolozi

Post World War II conservative thinking witnessed a marked shift in criticism away from capitalism itself and to the state. Cold War conservatives’ anti-communism led many on the right to perceive economic systems in stark terms as either purely capitalistic or on the road to communism.


2020 ◽  
pp. 180-200
Author(s):  
Steven M. Ortiz

This chapter takes a deeper look at the culture of infidelity that pervades the world of professional sports, why wives share a universal fear that their husbands will be unfaithful, and how they are affected by the possibility or actuality that their husbands will engage in sexual or emotional relationships with other women. Three patterns of infidelity are identified in the context of the sport marriage: the one-time encounter, the short-term affair, and the long-term affair. The concept of suspicion work is introduced to examine how wives try to manage the fear that their husbands may succumb to temptation and to specify how denial can be part of this process. The chapter discusses re-entry routines and communication methods some couples use when husbands return from travel, and the boundaries of fidelity and forgiveness wives establish as they attempt to cope with the realities of their husbands’ lives on the road.


Author(s):  
Patrick R Lawler ◽  
Deepak L Bhatt ◽  
Lucas C Godoy ◽  
Thomas F Lüscher ◽  
Robert O Bonow ◽  
...  

Abstract Systemic vascular inflammation plays multiple maladaptive roles which contribute to the progression and destabilization of atherosclerotic cardiovascular disease (ASCVD). These roles include: (i) driving atheroprogression in the clinically stable phase of disease; (ii) inciting atheroma destabilization and precipitating acute coronary syndromes (ACS); and (iii) responding to cardiomyocyte necrosis in myocardial infarction (MI). Despite an evolving understanding of these biologic processes, successful clinical translation into effective therapies has proven challenging. Realizing the promise of targeting inflammation in the prevention and treatment of ASCVD will likely require more individualized approaches, as the degree of inflammation differs among cardiovascular patients. A large body of evidence has accumulated supporting the use of high-sensitivity C-reactive protein (hsCRP) as a clinical measure of inflammation. Appreciating the mechanistic diversity of ACS triggers and the kinetics of hsCRP in MI may resolve purported inconsistencies from prior observational studies. Future clinical trial designs incorporating hsCRP may hold promise to enable individualized approaches. The aim of this Clinical Review is to summarize the current understanding of how inflammation contributes to ASCVD progression, destabilization, and adverse clinical outcomes. We offer forward-looking perspective on what next steps may enable successful clinical translation into effective therapeutic approaches—enabling targeting the right patients with the right therapy at the right time—on the road to more individualized ASCVD care.


Author(s):  
Adam Wieczorek

The demands for transport are presently at quite high level. There are few transport branches which are used now, but in fact the road transport is the one used most. Transport actions are ought to deliver goods from point A to point B, and thus they influence the goals of logistics referred as 5R. Providing the right resource, in right place, on the right time, in right cost and in right quality, depend mostly on transport services. Using of the autonomous technology in transport allow to achieve better results in the field of logistics services. The purpose of this article was to present the benefits of autonomous transport and its influence on the logistics. Theoretical considerations were summarized with conclusions, which may become during the deliberation about the usage of autonomous transport vehicles.


2012 ◽  
Vol 3 (1) ◽  
Author(s):  
Rewa Singh

“Why do we have to pay the price of poverty? We didn’t create poverty, adults did.” This might be the sentiment of every child who is forced to work at an age when he or she deserves to go to school unlike the fellow kids who are born in a family that can afford to give them a decent childhood. Child Labor is the single most damaging impediment on the road to achieving the goal of development and the purpose of this paper is to show the obstacles that this social evil poses in the path to development. The study used Exploratory, rather unstructured research design and instruments such as case studies and life histories. The study indicates that the government of India has taken some strict measures to eradicate this evil such as the passing of the Right to Education Bill, illegalization of employment of children under the age of 14 years, schemes like “Sarva Siksha Abhiyan” (Education for all campaign), free afternoon meal and so on. But on the ground level their implementation is shoddy due to (as bureaucrats would put it) practical problems. The problem is of course, in the system but it has more to do with the mindsets of the people too. There are people who speak against child labor in India and back at their own house or office, many of them will have at least one child working for them. People need to realize that what a waste of talent and a major obstacle to a country’s development, Child Labor is.   Keywords - Children. Child labor India. Social evil. Illegal employment.


Sign in / Sign up

Export Citation Format

Share Document