scholarly journals Performance Analysis of a Low Power High Speed Hybrid Full Adder Circuit and Full Subtractor Circuit

2021 ◽  
Vol 12 (5) ◽  
pp. 92-100
Author(s):  
M. Naga Gowtham, P.S Hari Krishna Reddy, K Jeevitha, K Hari Kishore, E Raghuveera, Shaik Razia
Keyword(s):  
High Speed ◽  
Supply Voltage ◽  
Average Power ◽  
Full Adder ◽  
Digital Circuit ◽  
Oxide Semiconductor ◽  
Transmission Gate ◽  
Average Power Consumption ◽  
Pass Transistor ◽  
Pass Transistor Logic

In this paper, a hybrid 1-bit adder and 1-bit Subtractor designs are implemented. The hybrid adder circuit is constructed using CMOS (complementary metal oxide semiconductor) logic along with pass transistor logic. The design can be extended 16 and 32 bits lately. The proposed full adder circuit is compared with the existing conventional adders in terms of power, delay and area in order to obtain a better circuit that serves the present day needs of people. The existing 1-bit hybrid adder uses EXNOR logic combined with the transmission gate logic. For a supply voltage of 1.8V the average power consumption (4.1563 µW) which is extremely low with moderately low delay (224 ps) resulting because of the deliberate incorporation of very weak CMOS inverters coupled with strong transmission gates. At 1.2V supply the power and delay were recorded to be 1.17664 µW and 91.3 ps. The design was implemented using 1-bit which can also be extended into a 32-bit design later. The designed implementation offers a better performance in terms of power and speed compared to the existing full adder design styles. The circuits were implemented in DSCH2 and Microwind tools respectively. The parameters such as power, delay, layout area and speed of the proposed circuit design is compared with pass transistor logic, adiabatic logic, transmission gate adder and so on. The circuit is also designed with a decrease in transistors in order to get the better results. Full Subtractor, a combinational digital circuit which performs 1-bit subtraction with borrow in is designed as a part of this project. The main aim behind this part of the project is to design a 1-bit full Subtractor using CMOS technology with reduced number of transistors and hence the efficiency in terms of area, power and speed have been calculated is designed using 8,10,15and 16 transistors. The parameters were calculated in each case and the results have been tabulated.

scholarly journals Performance Analysis of a Low Power High Speed Hybrid Full Adder Circuit and Full Subtractor Circuit

2021 ◽  
Vol 12 (3) ◽  
pp. 3037-3045
Author(s):  
M. Naga Gowtham Et.al
Keyword(s):  
High Speed ◽  
Supply Voltage ◽  
Average Power ◽  
Full Adder ◽  
Digital Circuit ◽  
Oxide Semiconductor ◽  
Transmission Gate ◽  
Average Power Consumption ◽  
Pass Transistor ◽  
Pass Transistor Logic

In this paper, a hybrid 1-bit adder and 1-bit Subtractor designs are implemented. The hybrid adder circuit is constructed using CMOS (complementary metal oxide semiconductor) logic along with pass transistor logic. The design can be extended 16 and 32 bits lately. The proposed full adder circuit is compared with the existing conventional adders in terms of power, delay and area in order to obtain a better circuit that serves the present day needs of people. The existing 1-bit hybrid adder uses EXNOR logic combined with the transmission gate logic. For a supply voltage of 1.8V the average power consumption (4.1563 µW) which is extremely low with moderately low delay (224 ps) resulting because of the deliberate incorporation of very weak CMOS inverters coupled with strong transmission gates. At 1.2V supply the power and delay were recorded to be 1.17664 µW and 91.3 ps. The design was implemented using 1-bit which can also be extended into a 32-bit design later. The designed implementation offers a better performance in terms of power and speed compared to the existing full adder design styles. The circuits were implemented in DSCH2 and Microwind tools respectively. The parameters such as power, delay, layout area and speed of the proposed circuit design is compared with pass transistor logic, adiabatic logic, transmission gate adder and so on. The circuit is also designed with a decrease in transistors in order to get the better results. Full Subtractor, a combinational digital circuit which performs 1-bit subtraction with borrow in is designed as a part of this project. The main aim behind this part of the project is to design a 1-bit full Subtractor using CMOS technology with reduced number of transistors and hence the efficiency in terms of area, power and speed have been calculated is designed using 8,10,15and 16 transistors. The parameters were calculated in each case and the results have been tabulated.

A 4:1 multiplexer using low-power high-speed domino technique for large fan-in gates using FinFET

Circuit World ◽  
2020 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Sandeep Garg ◽  
Tarun Kumar Gupta
Keyword(s):  
Low Power ◽  
High Speed ◽  
Supply Voltage ◽  
Average Power ◽  
Complementary Metal Oxide Semiconductor ◽  
Propagation Delay ◽  
Oxide Semiconductor ◽  
Content Type ◽  
Maximum Delay ◽  
Average Power Consumption

Purpose This paper aims to propose a new fin field-effect transistor (FinFET)-based domino technique low-power series connected foot-driven transistors logic in 32 nm technology and examine its performance parameters by performing transient analysis. Design/methodology/approach In the proposed technique, the leakage current is reduced at footer node by a division of current to improve the performance of the circuit in terms of average power consumption, propagation delay and noise margin. Simulation of existing and proposed techniques are carried out in FinFET and complementary metal-oxide semiconductor technology at FinFET 32 nm technology for 2-, 4-, 8- and 16-input domino OR gates on a supply voltage of 0.9 V using HSPICE. Findings The proposed technique shows maximum power reduction of 77.74% in FinFET short gate (SG) mode in comparison with current-mirror-based process variation tolerant (CPVT) technique and maximum delay reduction of 51.34% in low power (LP) mode in comparison with CPVT technique at a frequency of 100 MHz. The unity noise gain of the proposed circuit is 1.10× to 1.54× higher in comparison with different existing techniques in FinFET SG mode and 1.11× to 1.71× higher in FinFET LP mode. The figure of merit of the proposed circuit is up to 15.77× higher in comparison with existing domino techniques. Originality/value The research proposes a new FinFET-based domino technique and shows improvement in power, delay, area and noise performance. The proposed design can be used for implementing high-speed digital circuits such as microprocessors and memories.

scholarly journals Low-Power High-Speed Double Gate 1-bit Full Adder Cell

2016 ◽  
Vol 62 (4) ◽  
pp. 329-334 ◽  
Author(s):  
Raushan Kumar ◽  
Sahadev Roy ◽  
C.T. Bhunia
Keyword(s):  
Power Consumption ◽  
High Speed ◽  
Low Voltage ◽  
Supply Voltage ◽  
Average Power ◽  
Full Adder ◽  
Cmos Technology ◽  
Spice Simulation ◽  
Pass Transistor ◽  
Voltage Swing

Abstract In this paper, we proposed an efficient full adder circuit using 16 transistors. The proposed high-speed adder circuit is able to operate at very low voltage and maintain the proper output voltage swing and also balance the power consumption and speed. Proposed design is based on CMOS mixed threshold voltage logic (MTVL) and implemented in 180nm CMOS technology. In the proposed technique the most time-consuming and power consuming XOR gates and multiplexer are designed using MTVL scheme. The maximum average power consumed by the proposed circuit is 6.94μW at 1.8V supply voltage and frequency of 500 MHz, which is less than other conventional methods. Power, delay, and area are optimized by using pass transistor logic and verified using the SPICE simulation tool at desired broad frequency range. It is also observed that the proposed design may be successfully utilized in many cases, especially whenever the lowest power consumption and delay are aimed.

scholarly journals A novel design of high performance1-bit adder circuit at deep sub-micron technology

2017 ◽  
Vol 7 (1.1) ◽  
pp. 660
Author(s):  
Venkata Rao Tirumalasetty ◽  
C V. Mohan Krishna ◽  
K Sai Sree Tanmaie ◽  
T Lakshmi Naveena ◽  
Ch Jonathan
Keyword(s):  
Power Consumption ◽  
Average Power ◽  
Full Adder ◽  
Low Delay ◽  
Average Power Consumption ◽  
Good Improvement ◽  
Pass Transistor ◽  
Pass Transistor Logic ◽  
Power Delay Product ◽  
Novel Design

In this paper, the design of hybrid 1-bit full adder circuit using both pass transistor and CMOS logic was implemented. Performance pa-rameters such as power, delay, and PDP were compared with the existing designs such as complementary pass-transistor logic, transmis-sion gate adder. At 0.4V supply at 22nm technology, the average power consumption is 1. 525 uW was found to be extremely low with moderately low delay 90. 25 ps and PDP found to be 0.137 fJ. The present implementation has very good improvement in terms of delay, power and power delay product when compared to the existing hybrid 1-bit full adders. Also the number of transistors has been reduced to 13 where as the existiing hybrid full adder circuit has 16 transistors. The proposed circuit was implemented using mentor graphics tool in 45nm, 32nm and 22nm technologies with different supply voltages.  

scholarly journals Implementation of Low Power High Speed Adder’s using GDI Logic

2019 ◽  
Vol 8 (11) ◽  
pp. 1291-1298
Keyword(s):  
High Speed ◽  
Digital Circuits ◽  
Arithmetic Operation ◽  
Complementary Metal Oxide Semiconductor ◽  
Full Adder ◽  
Digital Circuit ◽  
Oxide Semiconductor ◽  
Basic Block ◽  
Look Ahead ◽  
Pass Transistor

Addition is a vital arithmetic operation and is the base of other arithmetic operations such as multiplication, subtraction and division. Adder is a digital circuit that does addition of binary numbers. The 1-bit full adder is the basic block of an arithmetic unit. In VLSI, there are many efficient techniques to design digital circuits. Some of the techniques are Pass Transistor logic (PTL), Complementary metal oxide semiconductor (CMOS) and Transmitter gate (TG). There are several adder designs implemented to reduce the power. However, each design undergoes from precise disadvantage. The adder design with good driving capability requires more power and the design with more delay which consumes less power. In this paper 8-bit Carry Increment Adder (CIA), Carry Bypass Adder (CBA), Carry Skip Adder (CSKA), Carry Look Ahead Adder (CLA), Kogge Stone Adder (KSA), Han Carlson Adder (HCA), and Brent Kung Adder (BKA) are implemented using Gate Diffusion Input (GDI) logic. These designs are simulated and implemented using Tanner tool. The result shows that CBA, CLA, and KSA designs using GDI logic are more efficient compared to CMOS logic in view of power consumption, delay, and area (transistors count) respectively

scholarly journals The Mixed Logic Style based Low Power and High Speed One-bit Binary adder for SOI Designs AT 32NM Technology

2019 ◽  
Vol 8 (4) ◽  
pp. 361-366
Keyword(s):  
Power Consumption ◽  
Low Power ◽  
High Speed ◽  
Average Power ◽  
Complementary Metal Oxide Semiconductor ◽  
Building Blocks ◽  
Full Adder ◽  
Oxide Semiconductor ◽  
Logic Design ◽  
Average Power Consumption

Binary adders are the fundamental building blocks to construct Data Processing arithmetic units. A novel one-bit full adder is presented in this paper which is designed by Mixed logic design style. In addition to small size transistors and reduced transistor activity compared to conventional CMOS (Complementary Metal Oxide Semiconductor) gates, it provides the priority between the High logic and Low logic for the computation of the output. Various logic topologies are used to design the one-bit full adder like High-Skew(Hi-Skew), Low-Skew(Li-Skew), TGL (Transmission Gate Logic) and DVL (Dual Voltage Logic). This new approach gives the better operating speed, low power consumption compared to conventional logic design by reducing the transistors activity and by improving the driving capability. This Mixed logic style provides 83.53% average power consumption and Propagation Delay of 14.02% at 0.8v. The H-SPICE simulation tool is used for construction and evaluation of the Full adder logic at different voltages. The 32nm model file is used for MOS transistors

scholarly journals A Low Power, High Speed 18-Transitor True Single-Phase Clocking D Flip- Flop Design In 90nm Cmos Technology

2019 ◽  
Vol 8 (11) ◽  
pp. 3258-3262
Keyword(s):  
Low Power ◽  
High Speed ◽  
Single Phase ◽  
Average Power ◽  
Circuit Complexity ◽  
Cmos Technology ◽  
Flip Flop ◽  
Average Power Consumption ◽  
Pass Transistor ◽  
Pass Transistor Logic

In this paper the authors came up with a contemporary low power, high-speed 18- transistor true singlephase clocking D flip-flop (FF) design using complementary pass-transistor logic. This design is a master-slave-type logic structure and hybrid logic design consisting of complementary pass-transistor logic style and static CMOS logic style. In order to reduce the number of transistors and to simplify the circuit complexity complementary pass-transistor logic style is used. In this design state transition is faster in the slave latch which enhances time performance using a virtual VDD technique. The circuit is designed using GPDK 90nm CMOS technology and the simulation results show better performance indices such as average power consumption, clock- to-Q delay, data-to-Q delay, PDP and area of utilization.

scholarly journals Design and Performance Analysis of 1-Bit FinFET Full Adder Cells for Subthreshold Region at 16 nm Process Technology

2015 ◽  
Vol 2015 ◽  
pp. 1-13 ◽  
Author(s):  
‘Aqilah binti Abdul Tahrim ◽  
Huei Chaeng Chin ◽  
Cheng Siong Lim ◽  
Michael Loong Peng Tan
Keyword(s):  
High Speed ◽  
Average Power ◽  
Full Adder ◽  
Propagation Delay ◽  
Oxide Semiconductor ◽  
Process Technology ◽  
Subthreshold Region ◽  
And Performance ◽  
Power Delay Product ◽  
20 Nm

The scaling process of the conventional 2D-planar metal-oxide semiconductor field-effect transistor (MOSFET) is now approaching its limit as technology has reached below 20 nm process technology. A new nonplanar device architecture called FinFET was invented to overcome the problem by allowing transistors to be scaled down into sub-20 nm region. In this work, the FinFET structure is implemented in 1-bit full adder transistors to investigate its performance and energy efficiency in the subthreshold region for cell designs of Complementary MOS (CMOS), Complementary Pass-Transistor Logic (CPL), Transmission Gate (TG), and Hybrid CMOS (HCMOS). The performance of 1-bit FinFET-based full adder in 16-nm technology is benchmarked against conventional MOSFET-based full adder. The Predictive Technology Model (PTM) and Berkeley Shortchannel IGFET Model-Common Multi-Gate (BSIM-CMG) 16 nm low power libraries are used. Propagation delay, average power dissipation, power-delay-product (PDP), and energy-delay-product (EDP) are analysed based on all four types of full adder cell designs of both FETs. The 1-bit FinFET-based full adder shows a great reduction in all four metric performances. A reduction in propagation delay, PDP, and EDP is evident in the 1-bit FinFET-based full adder of CPL, giving the best overall performance due to its high-speed performance and good current driving capabilities.

scholarly journals The Mixed Logic Style based Low Power and High Speed 3-2 Compressor for ASIC designs at 32nm Technology

2019 ◽  
Vol 9 (1) ◽  
pp. 43-49
Keyword(s):  
Power Consumption ◽  
Low Power ◽  
High Speed ◽  
Average Power ◽  
Complementary Metal Oxide Semiconductor ◽  
Building Blocks ◽  
Propagation Delay ◽  
Oxide Semiconductor ◽  
Logic Design ◽  
Average Power Consumption

Compressors are the fundamental building blocks to construct Data Processing arithmetic units. A novel 3-2 Compressor is presented in this paper which is designed by Mixed logic design style. In addition to small size transistors and reduced transistor activity compared to conventional CMOS (Complementary Metal Oxide Semiconductor) gates, it provides the priority between the High logic and Low logic for the computation of the output. Various logic topologies are used to design the 3-2 compressor like High-Skew(Hi-Skew), Low-Skew(Li-Skew), TGL (Transmission Gate Logic) and DVL (Dual value Logic). This new approach gives the better operating speed, low power consumption compared to conventional logic design by reducing the transistors activity, improving the driving capability and reduced input capacitance with skew gates. Especially the Mixed logic style-3 provides 92.39% average power consumption and Propagation Delay of 99.59% at 0.8v. The H-SPICE simulation tool is used for construction and evaluation of compressor logic at different voltages. 32nm model file is used for MOS transistors

Low-Power Hybrid 1-Bit Full-Adder Circuit for Energy Efficient Arithmetic Applications

2016 ◽  
Vol 26 (01) ◽  
pp. 1750014 ◽  
Author(s):  
M. C. Parameshwara ◽  
H. C. Srinivasaiah
Keyword(s):  
Supply Voltage ◽  
Average Power ◽  
Full Adder ◽  
Signal Frequency ◽  
Design Metrics ◽  
Input Signal Frequency ◽  
Implementation Approach ◽  
Pass Transistor ◽  
Power Delay Product ◽  
Generic Process

A novel “16 transistor” (16T) 1-bit Full adder (FA) circuit based on CMOS transmission-gate (TG) and pass transistor logics (PTL) is presented. This 1-bit FA circuit with TG and PTL structure is derived based on carry dependent sum implementation approach. The design metrics (DMs) such as power, delay, power-delay-product (PDP), and transistor-count (TC) for this 1-bit FA are compared against eight other standard and state-of-the-art 1-bit FA circuits reported till date. All the comparisons are done at post layout level with respect to the DMs under consideration. The proposed 1-bit FA dissipates an average power of 2.118[Formula: see text][Formula: see text]W, with a delay of 606 ps, with an area of 33.1[Formula: see text][Formula: see text]m2, resulting in a PDP of 1.28 fJ. This power and hence the PDP is the lowest of all, ever reported till date. In this comparative study a common test bench with a supply voltage [Formula: see text][Formula: see text]V, input signal frequency [Formula: see text][Formula: see text]MHz is used. This 1-bit FA is designed and implemented using Cadences' 90[Formula: see text]nm “generic-process-design-kit” (GPDK).

Sign in / Sign up

Export Citation Format

Share Document