scholarly journals Energy Envelope and Attenuation Characteristics of High-Frequency (HF) and Very-High-Frequency (VF) Martian Events

Author(s):  
Sabrina Menina ◽  
Ludovic Margerin ◽  
Taïchi Kawamura ◽  
Philippe Lognonné ◽  
Jules Marti ◽  
...  

ABSTRACT Since its deployment at the surface of Mars, the Seismic Experiment for Interior Structure (SEIS) instrument of the InSight mission has detected hundreds of small-magnitude seismic events. In this work, we highlight some features of two specific families: high-frequency (HF) and very-high-frequency (VF) events. We characterize the shape of the energy envelopes of HF and VF events with two parameters: (1) the delay time td between the onset and the peak of the dominant arrival; and (2) the quality factor Qc, which quantifies the energy decay rate in the coda. We observe that the envelope of HF and VF events is frequency independent. As a consequence, a single delay time suffices to characterize envelope broadening in the 2.5–7.5 Hz band. The typical coda decay time is also frequency independent, as attested by the close to linear increase of Qc with frequency. Finally, we use elastic radiative transfer theory to perform a series of inversion of seismogram envelopes for the attenuation properties of the Martian lithosphere. The good fit between synthetic and observed envelopes confirms that multiple scattering of elastic waves released by internal sources is a plausible explanation of the events characteristics. We quantify scattering and attenuation properties of Mars and highlight the differences and similarities with the Earth and the Moon. The albedo, that is, the contribution of scattering to the total attenuation, derived from VF events is very high, which we interpret as a signature of a mostly dry medium. Our results also suggest a stratification of the scattering and attenuation properties.

2021 ◽  
Author(s):  
Sabrina Menina ◽  
Ludovic Margerin ◽  
Taïchi Kawamura ◽  
Philippe Lognonné ◽  
Jules Marti ◽  
...  

<p>The InSight seismometer SEIS recorded tens of high-frequency (1.5-5Hz; HF) and Very-high frequency (1.5-15Hz, VF) Martian events. They are characterized by two temporally separated arrivals with a gradual beginning, a broad maximum and a very long decay. This observation is consistent with a long-range propagation of seismic P and S waves in a heterogeneous crust (Van Driel et al., accepted). To examine this hypothesis, first, we employ basic multiple-scattering concepts on the two groups of events. Then, we propose a full envelope modeling based on elastic radiative transport in a half-space. The model parametrization and the radiative transfer equations are presented in (Lognonné, P., et al. (2020) and Margerin, L., (2017)). We find that both HF and VF signals are depolarized and verify Gaussian statistics, at the exception of the ballistic primary and secondary arrivals. These properties agree with a multiple-scattering origin. For VF events, the energy partitioning ratio V<sup>2</sup>/H<sup>2</sup> between horizontal and vertical components is frequency dependent. We observe that V<sup>2</sup>/H<sup>2 </sup>is maximum at the so-called ‘2.4Hz resonance’ (~2) and decreases rapidly at frequencies higher than 5Hz (~0.1) then i remains relatively low up to frequencies of 15Hz at least. HF events do not exhibit a decrease of V<sup>2</sup>/H<sup>2 </sup>at high frequencies however further analysis reveals a strong correlation between energy partitioning and signal-to-noise (S/N) ratio for HF events. This observation suggests that a part of the difference between the HF and VF events can to some extent be explained by noise contamination. The generally low V<sup>2</sup>/H<sup>2 </sup>ratio of VF events is reminiscent of the response of unconsolidated layers, as observed at Pinyon Flats Observatory on Earth (Margerin, L., et al. (2009)). Unlike earthquakes and moonquakes observed in the same frequency band, the delay time measured from onset to peak of the secondary arrival of HF and VF events is frequency-independent. This suggests that the spectrum of heterogeneity of the Martian crust is smooth. We observe that, for HF and VF events, the delay time is weakly dependent on hypocentral distance. This observation cannot be reconciled with the predictions of multiple-scattering theories in a statistically homogeneous medium however it suggests a stratification of heterogeneity in the Martian lithosphere. The coda quality factor Q<sub>c</sub> of VF events is high and shows a linear increase with frequency. Q<sub>c</sub> of HF events is higher but it may be overestimated due to the noise contamination. The linear frequency dependence of Q<sub>c</sub> is strongly reminiscent of the leakage effect in a crustal scattering waveguide and suggests that part of the observed coda attenuation may be of structural origin. The full envelope modeling of the S0334a VF event results shows that the estimated value of the diffusivity (≃ 619 km<sup>2</sup>/s) is almost 6 times greater than for the S0128a VF event (≃ 90 km<sup>2</sup>/s). This observation again suggests a stratification of heterogeneity. In future works, we will perform the full envelope modeling of all the VF selected events at different frequencies to constrain a 1D attenuation and diffusion model of the Martian crust.</p>


1977 ◽  
Author(s):  
D. V. Campbell ◽  
William Kennebeck ◽  
A. Zanella ◽  
Paul Sexton

2021 ◽  
pp. 1-16
Author(s):  
Xu Hu ◽  
Bin Lin ◽  
Ping Wang ◽  
Hongguang Lyu ◽  
Tie-Shan Li

Abstract The very high frequency data exchange system (VDES) is promising in promoting electronic navigation (E-navigation) and improving navigation safety. The multiple access control (MAC) protocol is crucial to the transmission performance of VDES. The self-organising time division multiple access (SOTDMA) protocol, as the only access mode given by current recommendations, leads to a high rate of transmission collisions in the traditional automatic identification system (AIS), especially with heavy traffic loads. This paper proposes a novel feedback based time division multiple access (FBTDMA) protocol to address the problems caused by SOTDMA, such that collision of transmissions can be avoided in information transmission among vessels. Simulation results demonstrate that the proposed FBTDMA outperforms the traditional SOTDMA in terms of channel utilisation and throughput, and significantly reduces the transmission collision rate. The study is expected to provide insights into VDES standardisation and E-navigation modernisation.


Materials ◽  
2021 ◽  
Vol 14 (12) ◽  
pp. 3360
Author(s):  
Yakir Dahan ◽  
Eldad Holdengreber ◽  
Elichai Glassner ◽  
Oz Sorkin ◽  
Shmuel E. Schacham ◽  
...  

A new measurement technique of electrical parameters of superconducting thin films at the Very High Frequency (VHF) range is described, based on resonators with microstrip (MS) structures. The design of an optimal resonator was achieved, based on a thorough theoretical analysis, which is required for derivation of the exact configuration of the MS. A theoretical model is presented, from which an expression for the attenuation of a MS line can be derived. Accordingly, simulations were performed, and an optimal resonator for the VHF range was designed and implemented. Production constraints of YBa2Cu3O7 (YBCO) limited the diameter of the sapphire substrate to 3″. Therefore, a meander configuration was formed to fit the long λ/4 MS line on the wafer. By measuring the complex input reflection coefficients of a λ/4 resonator, we extracted the quality factor, which is mainly affected by the dielectric and conductor attenuations. The experimental results are well fitted by the theoretical model. The dielectric attenuation was calculated using the quasi-static analysis of the MS line. An identical copper resonator was produced and measured to compare the properties of the YBCO resonator in reference to the copper one. A quality factor of ~6·105 was calculated for the YBCO resonator, three orders of magnitude larger than that of the copper resonator. The attenuation per unit length of the YBCO layer was smaller by more than five orders of magnitude than that of the copper.


2020 ◽  
Vol 48 (1) ◽  
pp. 47-100
Author(s):  
Melitta Gillmann

AbstractBased on a corpus study conducted using the GerManC corpus (1650–1800), the paper sketches the functional and sociosymbolic development of subordinate clause constructions introduced by the subjunctor da ‘since’ in different text genres. In the second half of the 17th and the first half of the 18th century, the da clauses were characterized by semantic vagueness: Besides temporal, spatial and causal relations, the subjunctor established conditional, concessive, and adversative links between clauses. The corpus study reveals that different genres are crucial to the readings of da clauses. Spatial and temporal usages, for example, occur more often in sermons than in other genres. The conditional reading, in contrast, strongly tends to occur in legal texts, where it displays very high frequency. This could be the reason why da clauses carry indexical meaning in contemporary German and are associated with formal language. Over the course of the 18th century, the causal usages increase in all genres. Surprisingly, these causal da clauses tend to be placed in front of the matrix clause despite the overall tendency of causal clauses to follow the matrix clause.


Materials ◽  
2021 ◽  
Vol 14 (14) ◽  
pp. 4017
Author(s):  
Dorota Szwagierczak ◽  
Beata Synkiewicz-Musialska ◽  
Jan Kulawik ◽  
Norbert Pałka

New ceramic materials based on two copper borates, CuB2O4 and Cu3B2O6, were prepared via solid state synthesis and sintering, and characterized as promising candidates for low dielectric permittivity substrates for very high frequency circuits. The sintering behavior, composition, microstructure, and dielectric properties of the ceramics were investigated using a heating microscope, X-ray diffractometry, scanning electron microscopy, energy dispersive spectroscopy, and terahertz time domain spectroscopy. The studies revealed a low dielectric permittivity of 5.1–6.7 and low dielectric loss in the frequency range 0.14–0.7 THz. The copper borate-based materials, owing to a low sintering temperature of 900–960 °C, are suitable for LTCC (low temperature cofired ceramics) applications.


Sign in / Sign up

Export Citation Format

Share Document