scholarly journals Development of Long-Acting Injectable Ketamine Loaded PLGA Microparticles as a Non-opioid Analgesic

2021 ◽  
Vol 4 (1) ◽  
Author(s):  
Juma N. Daniels ◽  
Andrew Otte
Keyword(s):  
Drug Release ◽  
Release Kinetics ◽  
Drug Loading ◽  
Opioid Analgesic ◽  
Aqueous Extraction ◽  
Pharmacokinetic Studies ◽  
Burst Release ◽  
Processing Conditions ◽  
Significant Difference ◽  
Long Acting

Background/Objective: Ketamine, a psychedelic, is a noncompetitive N-methyl-D-aspartate receptor antagonist that may also bind to mu opioid receptors.  Historically, it has been used as an anesthetic (KetalarÒ), although now has found uses as a novel, quick acting, antidepressant for treatment-resistant depression (SpravatorÒ) and could be used as an adjuvant to opioid analgesia providing opioid-sparing effects.  One major advantage over opioids is Ketamine does not suffer from respiratory depression and maintains patent airways during anesthesia.  Ketamine is only available as a short-acting injectable solution or a nasal spray. Our goal is to develop a long-acting injectable form in a biodegradable matrix poly(lactic-co-glycolic) acid (PLGA) that does not have a burst release and provides 5-7 days of steady-state plasma levels.  Methods: A mechanistic approach towards development of a long-acting injectable began with a solubility screen of Ketamine. Based on these results, experiments began with an oil in water emulsification with two theoretical drug loadings (25% and 40%) and two processing conditions – (1) aqueous extraction and (2) aqueous extraction, intermediate drying, and a 25% Ethanol wash.  The formulations were characterized for drug loading, drug release, and crystallinity and imaged using scanning electron microscopy (SEM).  Results: Minimal differences were noted in the release profiles between formulations. Although, a significant difference was noted between the two processing conditions, where the extra intermediate drying step and 25% ethanol wash resulted in a significant slowing of the drug release rate.  Conclusion and Implications: The difference in release kinetics is hypothesized to be due to densification of the PLGA matrix, based on the increase in surface roughness/wrinkling in the SEM images, crystallinity increase, and on their respective powder x-ray diffraction patterns.  Our preliminary results demonstrate the feasibility of a longer acting Ketamine using PLGA. Further refinement of these formulations and rodent pharmacokinetic studies will be done in future.

Combine Drug Delivery of Thymoquinone-Doxorubicin by Cockle Shellderived pH-sensitive Aragonite CaCO3 Nanoparticles

2020 ◽  
Vol 10 (4) ◽  
pp. 518-533 ◽  
Author(s):  
Kehinde M. Ibiyeye ◽  
Abu B.Z. Zuki ◽  
Norshariza Nurdin ◽  
Mokrish Ajat
Keyword(s):  
Electron Microscopy ◽  
Drug Delivery ◽  
Calcium Carbonate ◽  
Drug Release ◽  
Release Kinetics ◽  
Drug Loading ◽  
Ph Sensitive ◽  
Multiple Drug ◽  
Burst Release ◽  
Cockle Shell

Background: Cockleshell-derived aragonite calcium carbonate nanoparticles were prepared by the top-down approach for combine delivery of two types of drugs. Objective: The aim of this study was to synthesize and characterize thymoquinone-doxorubicin loaded cockle shell-derived aragonite calcium carbonate nanoparticle. Aragonite calcium carbonate nanoparticles encapsulating thymoquinone and doxorubicin alone were also prepared. Methods: The blank and drug-loaded nanoparticles were characterized by field emission scanning electron microscopy, transmission electron microscopy, Zeta potential, Fourier transformed infrared and X-ray diffraction. Drug delivery properties, in vitro drug release study at pH 7.4, 6 and 4.8, and effect of blank nanoparticles on MCF10A, 3T3, MDA MB231 cells were also analyzed. Results: The blank and drug-loaded nanoparticles were pleomorphic and their sizes varying from 53.65 ± 10.29 nm to 60.49 ± 11.36 nm with an overall negative charge. The entrapment efficiency of thymoquinone and doxorubicin were 41.6 and 95.8, respectively. The FTIR showed little alteration after loading thymoquinone and doxorubicin while XRD patterns revealed no changes in the crystallizations of nanoparticles after drug loading. The drug release kinetics of doxorubicin and thymoquinone from the nanoparticles showed a continuous and gradual release after an initial burst release was observed. At pH 4.8, about 100% of drug release was noticed, 70% at pH 6 while only 50% at pH 7.4. The cell viability was 80% at a concentration of 1000 ug/ml of blank nanoparticle. Conclusion: The cockle shell-derived pH sensitive aragonite calcium carbonate nanoparticle provides an effective and simple means of multiple drug delivery and function as a platform for pH controlled release of loaded therapeutic agents.

scholarly journals Chitosan inserts for periodontitis: Influence of drug loading, plasticizer and crosslinking on in vitro metronidazole release

2007 ◽  
Vol 57 (4) ◽  
pp. 469-477 ◽  
Author(s):  
Romi Barat ◽  
Anegundha Srinatha ◽  
Jayanta Pandit ◽  
Shampa Anupurba ◽  
Neelam Mittal
Keyword(s):  
Drug Release ◽  
Release Kinetics ◽  
Drug Loading ◽  
Dissolution Time ◽  
Cross Linking ◽  
Burst Release ◽  
Casting Method ◽  
The Mean ◽  
Polymer Ratio

Chitosan inserts for periodontitis: Influence of drug loading, plasticizer and crosslinking onin vitrometronidazole releaseChitosan based metronidazole (MZ) inserts were fabricated by the casting method and characterized with respect to mass and thickness uniformity, metronidazole loading andin vitrometronidazole release kinetics. The fabricated inserts exhibited satisfactory physical characteristics. The mass of inserts was in the range of 5.63 ± 0.42 to 6.04 ± 0.89 mg. The thickness ranged from 0.46 ± 0.06 to 0.49 ± 0.08 mm. Metronidazole loading was in the range of 0.98 ± 0.09 to 1.07 ± 0.07 mg except for batch CM3 with MZ loading of 2.01 ± 0.08 mg. The inserts exhibited an initial burst release at the end of 24 h, irrespective of the drug to polymer ratio, plasticizer content or cross-linking. However, further drug release was sustained over the next 6 days. Cross-linking with 10% (m/m) of glutaraldehyde inhibited the burst release by ~30% and increased the mean dissolution time (MDT) from 0.67 to 8.59 days. The decrease in drug release was a result of reduced permeability of chitosan due to cross-linking.

scholarly journals CENTRAL COMPOSITE DESIGN FOR FORMULATION AND OPTIMIZATION OF LONG-ACTING INJECTABLE (LAI) MICROSPHERES OF PALIPERIDONE PALMITATE

2021 ◽  
pp. 87-98
Author(s):  
SANDIP MALI ◽  
NISHANT OZA
Keyword(s):  
Particle Size ◽  
Drug Release ◽  
Central Composite Design ◽  
Drug Loading ◽  
Entrapment Efficiency ◽  
Paliperidone Palmitate ◽  
Burst Release ◽  
Mean Particle Size ◽  
Long Acting ◽  
Central Composite

Objective: The aim of the present study was to optimize long-acting injectable (LAI) microspheres of Paliperidone palmitate (PP) for treatment of schizophrenia using face-centered central composite design (FC-CCD). Methods: In this study, poly lactic-co-glycolic acid (PLGA) based LAI microspheres of paliperidone palmitate (PP) were formulated by using FC-CCD. LAI microspheres were developed by using oil in water (O/W) emulsion solvent evaporation technique. On the basis of preliminary trials, FC-CCD was employed to check effect of independent variables such as drug polymer ratio (X1), homogenization speed (X2) and rate of addition (X3). While mean particle size (Y1), drug loading (Y2), entrapment efficiency (Y3), burst release (Y4), and drug release on day 60 (Y5) were considered as dependent variables and statistically evaluation performed by using design expert 12 software. Morphology of prepared microspheres was studied by using the scanning electron microscopy (SEM) technique, while particle size was analyzed by laser diffraction technique. In vitro drug release studies were performed using a controlled temperature shaking water bath apparatus. Fourier transforms infrared spectroscopy (FTIR) and differential scanning calorimetric (DSC) study were performed to analyze any changes in crystal behavior or to detect any chemical bonding between ingredients. 13C NMR and 1H NMR techniques were used to analyze end-capping and monomer ratio in developed microspheres. Results: The factorial batches mean particle size was found to be 38 µm to 104 µm and drug loading were found between 27.2 % to 47.2%. Mathematical modelling of drug release kinetics revealed that near zero-order drug release of checkpoint formulations. Endcap analysis and molar ratio of formulated microspheres were found to be ester end cap and ~75:25, respectively. Morphologically all the prepared samples were found to be spherical in shape and smooth surface. FTIR data showed no significant interactions occurred between drug and excipients. The actual responses of checkpoint formulations were observed within 5% variation of predicted values. Conclusion: The prepared microspheres showed promising results of morphology, particle size, drug loading, entrapment efficiency, burst release and drug release on day 60. The successful predictive designs models were achieved from employed FC-CCD.

Mesoporous Silica Molecular Sieve based Nanocarriers: Transpiring Drug Dissolution Research

2017 ◽  
Vol 23 (3) ◽  
pp. 467-480 ◽  
Author(s):  
Satyanarayan Pattnaik ◽  
Kamla Pathak
Keyword(s):  
Drug Release ◽  
Mesoporous Silica ◽  
Molecular Sieves ◽  
Release Kinetics ◽  
Drug Loading ◽  
Scale Up ◽  
Water Soluble ◽  
Drug Dissolution ◽  
Water Soluble Drugs ◽  
Loading Methods

Background: Improvement of oral bioavailability through enhancement of dissolution for poorly soluble drugs has been a very promising approach. Recently, mesoporous silica based molecular sieves have demonstrated excellent properties to enhance the dissolution velocity of poorly water-soluble drugs. Description: Current research in this area is focused on investigating the factors influencing the drug release from these carriers, the kinetics of drug release and manufacturing approaches to scale-up production for commercial manufacture. Conclusion: This comprehensive review provides an overview of different methods adopted for synthesis of mesoporous materials, influence of processing factors on properties of these materials and drug loading methods. The drug release kinetics from mesoporous silica systems, the manufacturability and stability of these formulations are reviewed. Finally, the safety and biocompatibility issues related to these silica based materials are discussed.

scholarly journals Formulation and investigation of crushed puffed rice-chitosan-HPMC based polymeric blends as carrier for sustained stomach specific drug delivery of piroxicam using 3(2) Taguchi mathematical design studies

2018 ◽  
Vol 6 (11) ◽  
pp. 61-80 ◽  
Author(s):  
Shashank Soni ◽  
Veerma Ram ◽  
Anurag Verma
Keyword(s):  
Drug Release ◽  
Release Kinetics ◽  
Drug Loading ◽  
Hydroxypropyl Methylcellulose ◽  
Research Work ◽  
Pharmaceutical Journal ◽  
Weight Variation ◽  
Zero Order Release ◽  
Puffed Rice

In the present experimental investigation an attempt has been made to assess the utility of Crushed Puffed Rice (CPR)-High Molecular Weight Chitosan (HMWCH)-Hydroxypropyl Methylcellulose K15M (HPMC K15M) as a polymeric carrier for the sustained stomach delivery of Piroxicam (PRX). A total of nine formulations were prepared by using 3 (2) Taguchi factorial design, physically blending drug and polymer(s) followed by encapsulation into hard gelatin capsules size 1. The prepared capsules were evaluated for various performance such as weight variation, drug contents, in vitro buoyancy and drug release in 0.1 M HCl. The effect of drug loading on in vitro performance of the formulations was also determined. Crushed puffed rice (CPR) remained buoyant for up to average time span of 06 hr as an unwetted irregular mass in 0.1 M HCl. However, when combined with HMWCH or HPMC K15M or HPMC K15M + HMWCH a low -density cylindrical raft type hydrogel was formed which remained buoyant for up to 12 hr and released up to 99% drug in a sustained manner from 8 to 12 hr following zero order release kinetics. It was also observed that drug release from drug + CPR matrices followed Fickian mechanism. Combination of CPR + HMWCH or HMWCH + HPMC K15M also follows Fickian mechanism. Obtained data from the research work suggests that CPR in combination with HMWCH or HPMC K15M or HPMC has sufficient potential to be used as a carrier for stomach specific delivery of gastric irritant drug like PRX.Soni et al., International Current Pharmaceutical Journal, April 2018, 6(11): 61-80http://www.icpjonline.com/documents/Vol6Issue11/01.pdf

Effect of Hydroxyapatite Nanoparticles on Ibuprofen Release from Carboxymethyl-Hexanoyl Chitosan/O-Hexanoyl Chitosan Hydrogel

2006 ◽  
Vol 6 (9) ◽  
pp. 2929-2935 ◽  
Author(s):  
Tse-Ying Liu ◽  
Ting-Yu Liu ◽  
San-Yuan Chen ◽  
Shian-Chuan Chen ◽  
Dean-Mo Liu
Keyword(s):  
Drug Release ◽  
Release Kinetics ◽  
Burst Release ◽  
Release Behavior ◽  
Chitosan Hydrogel ◽  
Sequential Release ◽  
Water Accessibility ◽  
Hydrophilic Nature ◽  
Hexanoyl Chitosan ◽  
Kinetics Of

In order to explore the effect of nanofiller on the regulation of the drug release behavior from microsphere-embedded hydrogel prepared by carboxymethyl-hexanoyl chitosan (HNOCC) and O-hexanoyl chitosan (OHC), the release kinetics was investigated in terms of various amounts of calcium-deficient hydroxyapatite (CDHA) nanoparticles incorporated. HNOCC is a novel chitosan-based hydrophilic matrix with a burst release profile in a highly swollen state. The drug release kinetics of the HNOCC hydrogel can be regulated by incorporation of well-dispersed CDHA nanoparticles. It was found that the release duration of ibuprofen (IBU) from HNOCC was prolonged with increasing amounts of CDHA which acts as a crosslink agent and diffusion barrier. On the contrary, the release duration of the IBU from OHC (hydrophobic phase) was shortened through increasing the CDHA amount over 5%, which is due to the hydrophilic nature of the CDHA nanoparticles destroying the intermolecular hydrophobic interaction and accelerating OHC degradation. Thus, water accessibility and molecular relaxation were enhanced, resulting in a higher release rate. In addition, sustained and sequential release behavior was achieved by embedding the OHC microspheres (hydrophobic phase) into the HNOCC (hydrophilic phase) matrix, which could significantly prolong the release duration of the HNOCC drug-loaded implant.

scholarly journals FORMULATION AND EVALUATION OF MUCOADHESIVE MICROSPHERES OF AN ANTI-MIGRAINE DRUG

2018 ◽  
Vol 8 (5) ◽  
pp. 465-474
Author(s):  
S PADMA PRIYA ◽  
AN Rajalakshmi ◽  
P Ilaveni
Keyword(s):  
Drug Release ◽  
Sustained Release ◽  
Sodium Alginate ◽  
Release Kinetics ◽  
Drug Loading ◽  
Research Work ◽  
Entrapment Efficiency ◽  
Polyvinyl Pyrrolidone ◽  
Anti Migraine Drug

Objective: The objective of this research work is to develop and evaluate mucoadhesive microspheres of an anti-migraine drug for sustained release. Materials and Methods:  Mucoadhesive microspheres were prepared by emulsification method using Sodium alginate (SA), polyvinyl pyrrolidone (PVP) and Chitosan in the various drug-polymer ratios of 1:1, 1:2 and 1:3. Nine  formulations were formulated and  evaluated for  possible drug polymer interactions, percentage yield, micromeritic properties, particle size, drug content, drug entrapment efficiency, drug loading, swelling index, In-vitro wash off test, in vitro  drug release, surface morphology and release kinetics. Results: The results showed that no significant drug polymer interaction in FTIR studies. Among all the formulations SF3 containing sodium alginate showed 77.18% drug release in 6hrs. Conclusion: Amongst the developed mucoadhesive microspheres, SF3 formulation containing sodium alginate exhibited slow and sustained release in a controlled manner and it is a promising formulation for sustained release of Sumatriptan succinate. Keywords: Mucoadhesive microspheres, Sodium alginate, polyvinyl pyrrolidone, Chitosan, sustained release.

scholarly journals Design and Characterization of Combinational Domperidone-Famotidine Floating Drug Delivery System - In vitro and In vivo studies

2021 ◽  
Vol 62 (2) ◽  
pp. 144-162
Author(s):  
Mounika Chidurala ◽  
Raveendra Reddy J
Keyword(s):  
Drug Release ◽  
Oral Administration ◽  
Quality By Design ◽  
Release Kinetics ◽  
Cost Effective ◽  
Fickian Diffusion ◽  
In Vivo Studies ◽  
Pharmacokinetic Studies

Introduction: The drawbacks assosiated with oral administration of drugscan be controlled or minimized by gastro retentive formulations that remain buoyant within the stomach for an extended time by providing prolonged gastric retention and releasethe drug in an exceedingly extended manner thereby improving bioavailability. The current research was to develop and optimize Domperidone and Famotidine floating tablets with extended release by Quality by Design approach. Method: Based on QTPP (Quality Target Product Profile), CQAs (Critical Quality Attributes)wereidentified. Risk analysis by the evaluation of formulation and process parameters showed that optimizing the levels of polymers could reduce high risk to achieve the target profile. A 23factor experimental design with midpoints was selected for statistical analysis and optimization. Results: HPMC K100 and Carbopol 934P had a positive effect while ethyl cellulose demonstrated a negative effect on the selected responses. Drug release kinetics followed the first-order release with Higuchi diffusion and Fickian diffusion. Optimized formula satisfying all the required parameters was selected and evaluated. The predicted response values were in close agreement with experimental response values. Abdominal X-ray imaging after oral administration of the tablets on a healthy rabbit’s stomach confirmed the extended floating behavior with shorter lag time. In vivo, pharmacokinetic studies in rabbits revealed that the optimized formulation exhibited prolonged drug release with enhanced Cmax, tmax, AUCo-t, and t1/2 of an optimized product when compared to the marketed product. Conclusions: It has been concluded that the application of Quality by Design in the formulation and optimization reduced the number of trials to produce a cost-effective formula.

Quality by Design enabled anti-hypertensive Floating drug delivery system by Risk assessment and Design of Experiment (DoE) – In vitro – In vivo correlation studies

2021 ◽  
Vol 16 ◽  
Author(s):  
Mounika Chidurala ◽  
Raveendra Reddy J
Keyword(s):  
Drug Release ◽  
Risk Analysis ◽  
Quality By Design ◽  
Release Kinetics ◽  
Cost Effective ◽  
Fickian Diffusion ◽  
In Vivo Studies ◽  
Pharmacokinetic Studies

Background: The present research aimed to develop and optimize extended-release floating tablets of Sacubitril and Valsartan through Quality by Design (QbD) approach. Risk analysis by formulation assessment and process parameters showed that optimizing the levels of the polymer will minimize high risk to meet the target profile. A two (2) level three (3) full factorial experimental design along with midpoints was carefully chosen for optimization and statistical analysis. Based on the literature, the independent and dependent variables were selected. Results: HPMC K100, Carbopol 934P had a positive effect, whereas Ethylcellulose had a negative effect on Floating time, drug release at 2 h, drug release at 12 h and, 50% responses. Drug release kinetics followed the first-order release with Higuchi and Fickian diffusion. Contour and overlay plots were utilized for an assortment of design space and optimized formula. ANOVA results of all the factors exhibited significance at p<0.05. Abdominal X-ray imaging of the optimized tablets on healthy rabbit’s stomach confirmed the floating behavior for more than 12 h. In vivo pharmacokinetic studies in rabbits showed that the optimized formulation exhibited prolonged and extended drug release with improved Cmax, tmax, AUCo-t, and t1/2 of test product when compared to marketed product. IVIVC model was developed by using dissolution data of in vitro and pharmacokinetics data of in-vivo by de-convolution method (Wagner-Nelson method). Conclusion: The Quality by Design implementation in the formulation and optimization abridged the number of trials to produce a cost-effective formula. In vivo studies confirmed that the formula was successfully developed with extended floating time (12 h) and drug release by risk analysis and experimental designs. Level A correlation was observed which confirmed a good correlation between in vitro and in vivo data.

scholarly journals FORMULATION AND EVALUATION OF METFORMIN HYDROCHLORIDE LOADED FLOATING MICROSPHERES

2019 ◽  
pp. 74-82
Author(s):  
SHIKHA KESHARVANI ◽  
PANKAJ KUMAR JAISWAL ◽  
ALOK MUKERJEE ◽  
AMIT KUMAR SINGH
Keyword(s):  
Particle Size ◽  
Drug Release ◽  
Surface Morphology ◽  
Release Kinetics ◽  
Drug Loading ◽  
Entrapment Efficiency ◽  
Metformin Hydrochloride ◽  
Compatibility Study ◽  
Specific Drug ◽  
Site Specific

Objective: The main objective of this study was to develop and evaluate the eudragit and HPMC coated metformin hydrochloride floating microspheres, in which HPMC helps in floating and eudragit as a coating material for a site-specific drug release in a controlled manner and the active moiety metformin used as anti-hyperglycemic agent. Methods: The floating microsphere was prepared by the solvent evaporation method incorporating metformin as a model drug. The prepared floating microsphere were characterized for particle size, %yield, drug loading and entrapment efficiency, compatibility study, %buoyancy, surface morphology and In vitro drug release and release kinetics. Results: The result metformin loaded floating microsphere was successfully prepared and the particle size range from 397±23.22 to 595±15.82 µm, the entrapment efficiency range from 83.49±1.33 to 60.02±1.65% and drug loading capacity range from 14.3±0.54 to 13.31±0.47% and %buoyancy range from 85.67±0.58 to 80.67±1.15%. The FT-IR and X-RD analysis confirmed that no any interaction between drug and excipient, and surface morphology confirmed those particles are sphere. The floating microsphere show maximum 96% drug release in pH 0.1N HCL and follow the Korsmeyer peppas model of the super case-2 transport mechanism. Conclusion: These results suggest that metformin loaded floating microspheres could be retain in stomach for long time and give site specific drug release in controlled manner.

Sign in / Sign up

Export Citation Format

Share Document