scholarly journals CENTRAL COMPOSITE DESIGN FOR FORMULATION AND OPTIMIZATION OF LONG-ACTING INJECTABLE (LAI) MICROSPHERES OF PALIPERIDONE PALMITATE

2021 ◽  
pp. 87-98
Author(s):  
SANDIP MALI ◽  
NISHANT OZA
Keyword(s):  
Particle Size ◽  
Drug Release ◽  
Central Composite Design ◽  
Drug Loading ◽  
Entrapment Efficiency ◽  
Paliperidone Palmitate ◽  
Burst Release ◽  
Mean Particle Size ◽  
Long Acting ◽  
Central Composite

Objective: The aim of the present study was to optimize long-acting injectable (LAI) microspheres of Paliperidone palmitate (PP) for treatment of schizophrenia using face-centered central composite design (FC-CCD). Methods: In this study, poly lactic-co-glycolic acid (PLGA) based LAI microspheres of paliperidone palmitate (PP) were formulated by using FC-CCD. LAI microspheres were developed by using oil in water (O/W) emulsion solvent evaporation technique. On the basis of preliminary trials, FC-CCD was employed to check effect of independent variables such as drug polymer ratio (X1), homogenization speed (X2) and rate of addition (X3). While mean particle size (Y1), drug loading (Y2), entrapment efficiency (Y3), burst release (Y4), and drug release on day 60 (Y5) were considered as dependent variables and statistically evaluation performed by using design expert 12 software. Morphology of prepared microspheres was studied by using the scanning electron microscopy (SEM) technique, while particle size was analyzed by laser diffraction technique. In vitro drug release studies were performed using a controlled temperature shaking water bath apparatus. Fourier transforms infrared spectroscopy (FTIR) and differential scanning calorimetric (DSC) study were performed to analyze any changes in crystal behavior or to detect any chemical bonding between ingredients. 13C NMR and 1H NMR techniques were used to analyze end-capping and monomer ratio in developed microspheres. Results: The factorial batches mean particle size was found to be 38 µm to 104 µm and drug loading were found between 27.2 % to 47.2%. Mathematical modelling of drug release kinetics revealed that near zero-order drug release of checkpoint formulations. Endcap analysis and molar ratio of formulated microspheres were found to be ester end cap and ~75:25, respectively. Morphologically all the prepared samples were found to be spherical in shape and smooth surface. FTIR data showed no significant interactions occurred between drug and excipients. The actual responses of checkpoint formulations were observed within 5% variation of predicted values. Conclusion: The prepared microspheres showed promising results of morphology, particle size, drug loading, entrapment efficiency, burst release and drug release on day 60. The successful predictive designs models were achieved from employed FC-CCD.

scholarly journals Development and evaluation of acyclovir loaded chitosan microspheres and cross linked with glutaraldehyde

2021 ◽  
Vol 11 (5) ◽  
pp. 110-114
Author(s):  
Harshita Jain ◽  
Vivek Jain ◽  
Sunil Kumar Jain ◽  
Pushpendra Kumar Khangar
Keyword(s):  
Particle Size ◽  
Drug Release ◽  
Drug Loading ◽  
Antiviral Drug ◽  
Entrapment Efficiency ◽  
Particle Size Analysis ◽  
Water Soluble ◽  
Size Analysis ◽  
Burst Release ◽  
Chitosan Microspheres

The guanine derivative antiviral drug acyclovir (ACV) is one of the oldest molecules put downing triumphant market until date, being commercially accessible in a variety of dosage forms for oral, topical and parenteral administrations. Clinical purpose of this drug is better to new antiviral agents due to its potential values such as suppression of recurrence, security profile, negligible drug interactions and being inexpensive. ACV is slightly water soluble, less permeable and poorly bioavailable, yet further potential antiviral molecule, the physicochemical alterations and new dosage form approaches resulted with more than 100 research efforts within a decade. The current study endeavored at the formulation of chitosan microspheres loaded with ACV to conquer the poor bioavailability and recurrent dose administration. Chitosan microspheres were prepared by emulsification technique by glutaraldehyde cross-linking. A variety of formulation and process variables such as polymer, glutaraldehyde, drug, span 80 concentrations, effect of stirring speed and stirring time were optimized. Formulated microspheres were characterized for its drug loading, invitro drug release, entrapment efficiency, surface morphology (SEM), particle size analysis and FTIR spectroscopy. The characterization of the fabricated microspheres demonstrated smooth surface with thin particle size allocation and entrapment efficiency of 80.8% for stirring speed batch. The prepared microspheres showed a controlled drug release of 93.2% over a period of 8 hrs with initial burst release of 56.7 % in the first 2hrs. The FTIR showed that there was no possible drug interaction among the drug and polymer. From the data’s obtained it can be concluded that the chitosan microspheres could be believed as a possible carrier for controlled drug delivery of ACV. Keywords: Acyclovir, Antiviral drug, Microspheres, Chitosan, Glutaraldehyde.

Solid Lipid Nanoparticles for Topical Delivery of Acitretin for the Treatment of Psoriasis by Design of Experiment

2020 ◽  
Vol 12 (2) ◽  
pp. 4474-4491
Author(s):  
Rajkumar Aland ◽  
Ganesan M ◽  
P. Rajeswara Rao ◽  
Bhikshapathi D. V. R. N.
Keyword(s):  
Particle Size ◽  
Drug Release ◽  
Solid Lipid Nanoparticles ◽  
Drug Loading ◽  
Entrapment Efficiency ◽  
Lipid Nanoparticles ◽  
Tem Analysis ◽  
In Vitro Drug Release ◽  
Solid Lipid

The main objective for this investigation is to develop and optimize the solid lipid nanoparticles formulation of acitretin for the effective drug delivery. Acitretin loaded SLNs were prepared by hot homogenization followed by the ultrasonication using Taguchi’s orthogonal array with eight parameters that could affect the particle size and entrapment efficiency. Based on the results from the analyses of the responses obtained from Taguchi design, three different independent variables including surfactant concentration (%), lipid to drug ratio (w/w) and sonication time (s) were selected for further investigation using central composite design. The  lipid Dynasan-116, surfactant poloxomer-188 and co surfactant egg lecithin resulted in better percent drug loading and evaluated for particle size, zeta potential, drug entrapment efficiency, in vitro drug release and stability. All parameters were found to be in an acceptable range. TEM analysis has demonstrated the presence of individual nanoparticles in spherical shape and the results were compatible with particle size measurements.  In vitro drug release of optimized SLN formulation (F2) was found to be 95.63 ± 1.52%, whereas pure drug release was 30.12 after 60 min and the major mechanism of drug release follows first order kinetics release data for optimized formulation (F2) with non-Fickian (anomalous) with a strong correlation coefficient (R2 = 0.94572) of Korsemeyer-Peppas model. The total drug content of acitretin gel formulation was found to 99.86 ± 0.012% and the diameter of gel formulation was 6.9 ± 0.021 cm and that of marketed gel was found to be 5.7 ± 0.06 cm, indicating better spreadability of SLN based gel formulation. The viscosity of gel formulation at 5 rpm was found to be 6.1 x 103 ± 0.4 x 103 cp. The release rate (flux) of acitretin across the membrane and excised skin differs significantly, which indicates about the barrier properties of skin. The flux value for SLN based gel formulation (182.754 ± 3.126 μg cm−2 h−1) was found to be higher than that for marketed gel (122.345 ± 4.786 μg cm−2 h−1). The higher flux and Kp values of SLN based gel suggest that it might be able to enter the skin easily as compared with marketed gel with an advantage of low interfacial tension of the emulsifier film that ensures an excellent contact to the skin. This topically oriented SLN based gel formulation could be useful in providing site-specific dermal treatment of psoriasis

Design and Evaluation of Long Acting Biodegradable PLGA Microspheres for Ocular Drug Delivery

2019 ◽  
Vol 10 ◽  
Author(s):  
Anjali Pandya ◽  
Rajani Athawale ◽  
Durga Puro ◽  
Geeta Bhagwat
Keyword(s):  
Particle Size ◽  
Drug Release ◽  
Degradation Products ◽  
Ex Vivo ◽  
Research Work ◽  
Entrapment Efficiency ◽  
Rational Approach ◽  
Plga Microspheres ◽  
Long Acting

Background: The research work involves development of PLGA biodegradable microspheres loaded with dexamethasome for intraocular delivery. Objective: To design and evaluate long acting PLGA microspheres for ocular delivery of dexamethasone. Method: Present formulation involves the development of long acting dexamethasone loaded microspheres composed of a biodegradable controlled release polymer, Poly(D, L- lactide-co-glycolide) (PLGA), for the treatment of posterior segment eye disorders intravitreally. PLGA with monomer ratio of 50:50 of lactic acid to glycolic acid was used to achieve a drug release up to 45 days. Quality by Design approach was utilized for designing the experiments. Single emulsion solvent evaporation technique along with high pressure homogenization was used to facilitate formation of microspheres. Results: Particle size evaluation, drug content and drug entrapment efficiency were determined for the microspheres. Particle size and morphology was observed using Field Emission Gun-Scanning Electron Microscopy (FEG-SEM) and microspheres were in the size range of 1-5 μm. Assessment of drug release was done using in vitro studies and transretinal permeation was observed by ex vivo studies using goat retinal tissues. Conclusion: Considering the dire need for prolonged therapeutic effect in diseases of the posterior eye, an intravitreal long acting formulation was designed. Use of biodegradable polymer with biocompatible degradation products was a rational approach to achieve this aim. Outcome from present research shows that developed microspheres would provide a long acting drug profile and reduce the frequency of administration thereby improving patient compliance.

scholarly journals FORMULATION, OPTIMIZATION AND IN VITRO EVALUATION OF 5-FLUOROURACIL LOADED LIQUORICE CRUDE PROTEIN NANOPARTICLES FOR SUSTAINED DRUG DELIVERY USING BOX-BEHNKEN DESIGN

2021 ◽  
pp. 216-226
Author(s):  
GEETHA V. S. ◽  
MALARKODI VELRAJ
Keyword(s):  
Drug Delivery ◽  
Particle Size ◽  
Drug Release ◽  
Crude Protein ◽  
Drug Loading ◽  
Entrapment Efficiency ◽  
Box Behnken Design ◽  
Sustained Drug Delivery ◽  
Drug Loading Efficiency

Objective: To formulate, optimize and evaluate 5-fluorouracil loaded liquorice crude protein nanoparticles for sustained drug delivery using Box-Behnken design. Methods: 5-fluorouracil (5-FU) loaded liquorice crude protein (LCP) nanoparticles were prepared by desolvation method using ethanol-water (1:2 ratio), Tween-80 (2%v/v) as stabilizing agent and gluteraldehyde (8% v/v) as cross linking agent. The optimization of prepared nanoparticles was carried out using Box-Behnken design with 3 factors 2 levels and 3 responses. The independent variables were A)5-FU concentration B)LCP concentration and C) sonication time while the responses were R1) Drug entrapment efficiency R2) Drug loading efficiency and R3) Particle size. The correlation between factors and responses were studied through response surface plots and mathematical equations. The nanoparticles were evaluated for FTIR, physicochemical properties like particle size and zeta potential by Photon correlation spectroscopy (PCS) and surface morphology by TEM. The entrapment efficiency, drug loading efficiency and in vitro drug release studies in PBS pH 7.4 (24 h) were carried out. The observed values were found to be in close agreement with the predicted value obtained from the optimization process. Results: 5-fluorouracil loaded LCP nanoparticles were prepared by desolvation method, the optimization was carried out by Box-Behnken design and the final formulation was evaluated for particle size (301.1 nm), zeta-potential (-25.8mV), PDI(0.226), with entrapment efficiency (64.07%), drug loading efficiency (28.54%), in vitro drug release (65.2% in 24 h) respectively. The formulated nanoparticles show Higuchi model drug release kinetics with sustained drug delivery for 24 h in pH7.4 buffer. Conclusion: The results were proved to be the most valuable for the sustained delivery of 5-Fluorouracil using liquorice crude protein as carrier. 5-FU–LCP nanoparticles were prepared using Tween-80 as stabilizing agent and gluteraldehyde as cross-linking agent to possess ideal sustained drug release characteristics.

scholarly journals FORMULATION AND EVALUATION OF METFORMIN HYDROCHLORIDE LOADED FLOATING MICROSPHERES

2019 ◽  
pp. 74-82
Author(s):  
SHIKHA KESHARVANI ◽  
PANKAJ KUMAR JAISWAL ◽  
ALOK MUKERJEE ◽  
AMIT KUMAR SINGH
Keyword(s):  
Particle Size ◽  
Drug Release ◽  
Surface Morphology ◽  
Release Kinetics ◽  
Drug Loading ◽  
Entrapment Efficiency ◽  
Metformin Hydrochloride ◽  
Compatibility Study ◽  
Specific Drug ◽  
Site Specific

Objective: The main objective of this study was to develop and evaluate the eudragit and HPMC coated metformin hydrochloride floating microspheres, in which HPMC helps in floating and eudragit as a coating material for a site-specific drug release in a controlled manner and the active moiety metformin used as anti-hyperglycemic agent. Methods: The floating microsphere was prepared by the solvent evaporation method incorporating metformin as a model drug. The prepared floating microsphere were characterized for particle size, %yield, drug loading and entrapment efficiency, compatibility study, %buoyancy, surface morphology and In vitro drug release and release kinetics. Results: The result metformin loaded floating microsphere was successfully prepared and the particle size range from 397±23.22 to 595±15.82 µm, the entrapment efficiency range from 83.49±1.33 to 60.02±1.65% and drug loading capacity range from 14.3±0.54 to 13.31±0.47% and %buoyancy range from 85.67±0.58 to 80.67±1.15%. The FT-IR and X-RD analysis confirmed that no any interaction between drug and excipient, and surface morphology confirmed those particles are sphere. The floating microsphere show maximum 96% drug release in pH 0.1N HCL and follow the Korsmeyer peppas model of the super case-2 transport mechanism. Conclusion: These results suggest that metformin loaded floating microspheres could be retain in stomach for long time and give site specific drug release in controlled manner.

scholarly journals FORMULATION OF POLYMERIC NANOSUSPENSION CONTAINING PRAMIPEXOLE DIHYDROCHLORIDE AND HESPERIDIN FOR IMPROVED TREATMENT OF PARKINSON’S DISEASES

2018 ◽  
Vol 11 ◽  
Author(s):  
Somasundaram I
Keyword(s):  
Particle Size ◽  
Drug Release ◽  
Zeta Potential ◽  
In Vitro Release ◽  
Entrapment Efficiency ◽  
Burst Release ◽  
Drug Content ◽  
Pramipexole Dihydrochloride ◽  
Vitro Release

Aims and Objectives: The present study is to formulate the nanosuspension containing a hydrophilic drug pramipexole dihydrochloride and hesperidin and to increase the drug entrapment efficiency.Methods: Hesperidin and pramipexole dihydrochloride loaded in chitosan nanosuspension is prepared by ionic gelation method using chitosan and tripolyphosphate. There was no incompatibility observed between the drug and polymer through Fourier transform infrared and differential scanning calorimetric. Various other parameters such as particle size, zeta potential, scanning electron microscope, drug content, drug entrapment efficiency, and in vitro release have been utilized for the characterization of nanoparticles.Results and Discussion: The average size of particle is 188 nm; zeta potential is 46.7 mV; drug content of 0.364±0.25 mg/ml; entrapment efficiency of 72.8% is obtained with HPN3 formulation. The PHC1 shows the highest drug release followed by PHC2 due to low concentration of polymer and PHC4 and PHC5 show less drug release due to high concentration of polymer. The in vitro release of PHC3 is 85.2%, initial the burst release is shown which is approximately 60% in 8 h; then, slow release later on drastic reduction in release rate is shown in 24 h. The in vivo study histopathological report confers the effective protective against rotenone induces Parkinson’s.Conclusion: PHC3 was chosen as the best formulation due to its reduced particle size and controlled release at optimum polymer concentration which may be used to treat Parkinson’s disease effectively..

scholarly journals FORMULATION AND EVALUATION OF ETHAMBUTOL POLYMERIC NANOPARTICLES

2020 ◽  
pp. 207-217
Author(s):  
MONOWAR HUSSAIN ◽  
ANUPAM SARMA ◽  
SHEIKH SOFIUR RAHMAN ◽  
ABDUL MATIN SIDDIQUE ◽  
TANUKU PAVANI EESWARI
Keyword(s):  
Particle Size ◽  
Drug Release ◽  
Zeta Potential ◽  
Polymeric Nanoparticles ◽  
Release Kinetics ◽  
Drug Loading ◽  
Entrapment Efficiency ◽  
Compatibility Study ◽  
Bacterial Disease ◽  
Dose Frequency

Objective: Tuberculosis (TB) is an infectious bacterial disease caused by Mycobacterium tuberculosis which most commonly affects the lungs. TB has the highest mortality rate than any other infectious disease occurs worldwide. The main objective of the present investigation was to develop polymeric nanoparticles based drug delivery system to sustain the ethambutol (ETB) release by reducing the dose frequency. Methods: The Preformulation studies of drug ETB were done by physical characterization, melting point determination, and UV spectrophotometric analysis. The ETB loaded nanoparticles were prepared by double-emulsion (W/O/W) solvent evaporation/diffusion technique. The prepared polymeric nanoparticles were evaluated for particle size, polydispersity index, zeta potential, drug entrapment efficiency, drug loading, drug-polymer compatibility study, surface morphology, in vitro drug release, and release kinetics. Results: Based on the result obtained from the prepared formulations, F11 showed the best result and was selected as the optimized formulation. Optimized batch (F11) showed better entrapment efficiency (73.3%), good drug loading capacity (13.21%), optimum particle size (136.1 nm), and zeta potential (25.2 mV) with % cumulative drug release of 79.08% at the end of 24 h. Conclusion: These results attributed that developed polymeric nanoparticles could be effective in sustaining the ETB release over 24 h. Moreover, the developed nanoparticles could be an alternate method for ETB delivery with a prolonged drug release profile and a better therapeutic effect can be achieved for the treatment of tuberculosis.

scholarly journals Formulation and Optimization of Carbamazepine Microspheres by 2 Factor 2 Level Central Composite Design

2016 ◽  
Vol 19 (2) ◽  
pp. 152-160 ◽  
Author(s):  
Nusrat Ahmed ◽  
Ikramul Hasan ◽  
Mohammad Saifuddin ◽  
Jakir Ahmed Chowdhury ◽  
Md Selim Reza
Keyword(s):  
Drug Release ◽  
Central Composite Design ◽  
Drug Loading ◽  
Statistical Significance ◽  
Linear Regression Analysis ◽  
Dissolution Time ◽  
Permeability Characteristics ◽  
Optimum Formulation ◽  
Eudragit Rl ◽  
Central Composite

The present investigation was designed to prepare controlled release microspheres of carbamazepine using two polymers of different solubility and permeability characteristics, Ethocel standard 45 premium and Eudragit RL 100. The drug release profile was optimized with the aid of design of experiments (DoE). Microspheres of combined polymers were designed according to 22 factorial central composite design (CCD), taking drug loading and polymeric ratio as the independent variables. Total thirteen batches were prepared. The dependent variables were percentage of drug released in 3 hours and 6 hours and mean dissolution time (MDT). The regression parameters of the developed model and graphical interpretation for each response with statistical significance were calculated by using Minitab 17. The relationship between the experimental variables and responses were evaluated by generating response surface plots. Increased amount of Eudragit RL 100 had impact on surface morphology of prepared microspheres. It produced larger holes on the surface due to its higher permeability characteristics. Polynomial mathematical models generated for various response variables using multiple linear regression analysis, were found to be statistically significant (p < 0.05). One optimum formulation (O1) was selected based on USP specification and the second optimum formulation (O2) was selected for the maximization of MDT (hours). Batch O1 showed 22.85 % and 48.78 % drug release after 3 and 6 hours, respectively which were found to be in close agreement with those predicted by the mathematical model. Another optimum formulation, batch O2 showed MDT as 160.61 hours.Bangladesh Pharmaceutical Journal 19(2): 152-160, 2016

scholarly journals Preparation and Evaluation of Intraperitoneal Long-Acting Oxaliplatin-Loaded Multi-Vesicular Liposomal Depot for Colorectal Cancer Treatment

Pharmaceutics ◽  
2020 ◽  
Vol 12 (8) ◽  
pp. 736
Author(s):  
Sharif Md Abuzar ◽  
Eun Jung Park ◽  
Yeji Seo ◽  
Juseung Lee ◽  
Seung Hyuk Baik ◽  
...  
Keyword(s):  
Colorectal Cancer ◽  
Drug Release ◽  
Entrapment Efficiency ◽  
Lag Phase ◽  
Burst Release ◽  
Sustained Drug Release ◽  
Long Acting ◽  
High Entrapment Efficiency

Colorectal cancer with peritoneal metastasis has a poor prognosis because of inadequate responses to systemic chemotherapy. Cytoreductive surgery followed by intraperitoneal (IP) chemotherapy using oxaliplatin has attracted attention; however, the short half-life of oxaliplatin and its rapid clearance from the peritoneal cavity limit its clinical application. Here, a multivesicular liposomal (MVL) depot of oxaliplatin was prepared for IP administration, with an expected prolonged effect. After optimization, a combination of phospholipids, cholesterol, and triolein was used based on its ability to produce MVL depots of monomodal size distribution (1–20 µm; span 1.99) with high entrapment efficiency (EE) (92.16% ± 2.17%). An initial burst release followed by a long lag phase of drug release was observed for the MVL depots system in vitro. An in vivo pharmacokinetic study mimicking the early postoperative IP chemotherapy regimen in rats showed significantly improved bioavailability, and the mean residence time of oxaliplatin after IP administration revealed that slow and continuous erosion of the MVL particles yielded a sustained drug release. Thus, oxaliplatin-loaded MVL depots presented in this study have potential for use in the treatment of colorectal cancer.

scholarly journals A NOVEL NANOGEL FORMULATION OF FINASTERIDE FOR TOPICAL TREATMENT OF ANDROGENETIC ALOPECIA: DESIGN, CHARACTERIZATION AND IN VITRO EVALUATION

2021 ◽  
pp. 228-240
Author(s):  
DIVYA SANGANABHATLA ◽  
R. SHYAM SUNDER
Keyword(s):  
Particle Size ◽  
Drug Release ◽  
Drug Loading ◽  
In Vitro Release ◽  
Entrapment Efficiency ◽  
Androgenetic Alopecia ◽  
Stability Studies ◽  
Drug Content ◽  
Release Study

Objective: The present paper describes the development and evaluation of a Novel Finasteride (FSD) nanogel topical delivery for the treatment of Androgenetic Alopecia. Nano-based topical formulation was chosen to enhance the solubility, permeability, biocompatibility of drug and to overcome the problems associated with the oral delivery of finasteride. Methods: Various trails batches were prepared by using probe sonication method. Based on stability studies and particle size, NP4 trail was optimized which exhibited a spherical shape with a mean diameter of 113.80±0.72, the polydispersity of 0.28±0.01, zeta potential of-25.2 mV, drug entrapment efficiency of 92.67±0.47 %, and drug loading of 6.15±0.02 %. Storage stability studies demonstrated that the particle size and entrapment efficiency were not changed during 3 mo both at 4 °C and room temperature. Finasteride (FSD) NLCs were characterized for particle size by scanning electron microscope (SEM), chemical state by X-Ray diffraction (XRD), physical stability by centrifugation and thermodynamic stability by Freeze-thaw method. These prepared nanoparticles were transformed into topical nanogel and further evaluated. Results: Among the different trails, C2 trail of NLC gel has shown excellent gelling capacity, clear appearance, good viscosity characteristics and was selected for further evaluation studies. Batches of topical nanogel were characterized through pH, homogeneity, spreadability, viscosity, drug content and in vitro drug release study. Based on pH (6.5-6.8), drug content (91.25±0.9%), spreadability (6.7 cm/sec), C2 batch was subjected to In vitro skin occlusivity study, in-vitro release study and In vitro heamolysis study. Conclusion: The percent cumulative drug release for Finasteride (FSD) gel was found to be 758.52±1.49 µg at 24 h which is quite higher than plain gel and Finasteride (FSD) gel showed maximum occlusiveness and excellent spreadability and found to be stable. In conclusion, prepared Finasteride (FSD) Nanogel could be used with promising potential for the treatment of Androgenetic Alopecia.

Sign in / Sign up

Export Citation Format

Share Document