scholarly journals Characterization of the Japanese Management Technique 5S. Polytechnic Dining Room Case

2021 ◽  
Author(s):  
M. Izurieta ◽  
G. Miño ◽  
D. Vallejo
Keyword(s):  
Management Technique ◽  
Protective Equipment ◽  
Improve Quality ◽  
Japanese Management ◽  
Qualitative And Quantitative ◽  
Palabras Clave ◽  
Dining Room ◽  
Productivity And Competitiveness

This research aimed to characterize the Japanese 5S management technique, using a case study of the Polytechnic Dining Room, given that in this unit you can apply the 5S technique without any problem, and improve quality, productivity and competitiveness. Several elements were examined including the existence of work material, procedures for eliminating unnecessary materials, location of work materials, cleaning of work areas, standardization of processes, use of uniforms, and protective equipment, among others. Qualitative and quantitative approaches were used. A documentary research instrument was applied, using a Likert scale with ordinal variables. According to the results, those that obtained the highest rating of 7 were as follows: Seiris (classification) 25%, Seiton (Order) 36%, Seiso (Cleaning) 32%, Seiketsu (Standardization) 36%, and Shitsuke (Maintenance) 57%. Therefore, we conclude that in Shitsuke there was greater employee commitment, and Seiri obtained the lowest qualification. Keywords: 5S, quality improvement, productivity, competitiveness. Resumen Con la finalidad de conocer los elementos innecesarios, existencia de material de trabajo, procedimientos de eliminación de materiales innecesarios, ubicación de materiales de trabajo, limpieza de áreas de trabajo, estandarización de procesos, utilización de uniformes, equipo de protección entre otros, la presente investigación tienen el objetivo de caracterizar la técnica de gestión japonesa 5S, caso Comedor Politécnico, considerando que en esta dependencia puede aplicar sin ninguna problema la técnica 5S, mejorar la calidad, su productividad y competitividad; la investigación tiene un enfoque cualicuantitativo, con un método analítico sintético con un nivel de investigación exploratorio, descriptivo, se aplica un instrumento de investigación documental, de escala con variables ordinales, utilizando la escala Likert, método inductivo empírico de información primaria, en la cual se obtiene la siguientes conclusiones obteniendo la calificación más alta de 7, en lo referente Seiri (clasificación) 25%, Seiton ( Orden)36%, Seiso (Limpieza) 32%, Seiketsu (Estandarización) 36%, Shitsuke ( Mantenimiento) 57%, de esta manera de concluye que en Shitsuke donde existe mayor compromiso de los empleados, y en Seiri es la que menor calificación se obtiene. Palabras clave: 5S, mejora de la calidad, productividad, competitividad.

scholarly journals Desempeño térmico de cerramientos de tierra alivianada Posibilidades de aplicación en el territorio peruano

2019 ◽  
Vol 22 (1) ◽  
Author(s):  
Martín Wieser-Rey ◽  
Silvia Onnis ◽  
Giuseppina Meli
Keyword(s):  
Thermal Comfort ◽  
Thermal Inertia ◽  
Thermal Mass ◽  
Thermal Transmittance ◽  
Qualitative And Quantitative ◽  
Palabras Clave ◽  
Energy Efficiency Standard ◽  
Thermal Simulations ◽  
Passive Air Conditioning

Resumen Las soluciones constructivas tradicionales y contemporáneas han demostrado tener serias limitaciones en la solución del déficit cualitativo y cuantitativo de la vivienda y el equipamiento, de igual manera, las evidencias del desempeño térmico son igualmente desalentadoras. Es por lo que se indaga sobre la capacidad de la tierra alivianada de brindar confort térmico en los edificios, considerando los diferentes climas del territorio peruano y comparándola con los sistemas constructivos más comunes en el medio: el adobe y la albañilería de ladrillo. A partir de la caracterización previa de las cualidades térmicas de los componentes y de la realización de simulaciones térmicas dinámicas, comparando el desempeño de diferentes prototipos digitales, se identificaron las virtudes de la tierra alivianada por el marcado equilibrio entre una masa térmica media y una conductividad térmica relativamente baja, siendo los únicos que logran cumplir con las exigencias de la actual norma peruana de eficiencia energética para el caso de los climas más fríos. Adicionalmente de destaca la composición a partir de materiales naturales, renovables y biodegradables que son ventajas ecológicas. Palabras clave: arquitectura bioclimática; arquitectura sostenible; climatización pasiva; confort térmico; inercia térmica; simulación térmica; sistema constructivo; transmitancia térmica   Abstract Traditional and contemporary construction systems have shown serious limitations in the solution of the qualitative and quantitative deficit of housing and equipment, in the same way, the evidence of thermal performance is equally discouraging. That is why we inquire about the ability of the land relieved to provide thermal comfort in buildings, considering the different climates of the Peruvian territory and comparing it with the most common construction systems in the environment: adobe and brick masonry. From the previous characterization of the thermal qualities of the components and the realization of dynamic thermal simulations, comparing the performance of different digital prototypes, the virtues of the earth alleviated by the marked balance between a medium thermal mass and a conductivity were identified relatively low thermal, being the only ones that manage to meet the requirements of the current Peruvian energy efficiency standard in the case of colder climates. In addition, the composition from natural, renewable and biodegradable materials that are ecological advantages stands out. Keywords: bioclimatic architecture; sustainable architecture; passive air conditioning; Thermal comfort; thermal inertia; thermal simulation; construction system; thermal transmittance.   Recibido: febrero 25 / 2019  Evaluado: septiembre 20 / 2019  Aceptado: noviembre 23 / 2019 Publicado en línea: noviembre de 2019                               Actualizado: noviembre de 2019  

scholarly journals O PLANO DE CARREIRA DOS TÉCNICOS ADMINISTRATIVOS DE UNIVERSIDADES FEDERAIS: o caso de uma Universidade Federal do norte do Brasil

2017 ◽  
Vol 3 (3) ◽  
pp. 584
Author(s):  
Ana Lúcia Medeiros ◽  
Erica Lissandra Bertolossi Dantas ◽  
Mônica Aparecida da Rocha Silva
Keyword(s):  
Quantitative Approach ◽  
Development Plan ◽  
Qualitative And Quantitative ◽  
Level Of Satisfaction ◽  
Palabras Clave ◽  
Northern Brazil ◽  
Trained Staff ◽  
The University ◽  
And Training

O objetivo do artigo é compreender a percepção dos técnicos administrativos sobre a política de capacitação, qualificação e treinamento de uma universidade federal do Norte do Brasil. A metodologia adotada foi a de estudo de caso, com abordagem qualitativa e quantitativa. As informações foram coletadas por meio da aplicação de questionários, respondidos por 323 servidores. As categorias analisadas foram: política de capacitação e qualificação, grau de conhecimento dos servidores técnico-administrativos no tocante à carreira, e nível de satisfação destes servidores com o seu plano de desenvolvimento. Os dados apontaram que a universidade pesquisada tem um quadro de pessoal jovem bem capacitado, porém insatisfeito quanto à política de qualificação e capacitação da instituição. PALAVRAS-CHAVE: Universidade; carreira; qualificação. ABSTRACT The objective of the article is to understand administrative technicians´ perception about the politics of capacitation, qualification and training of a Federal University of Northern Brazil (FUNB). The methodology used was the case study with the qualitative and quantitative approach. The collection of the information was through questionnaires that 323 servers answered. The categories analyzed were the capacitation and qualification policy, the degree of administrative technicians´ knowledge regarding career and the level of satisfaction of these servers with their development plan. The data showed that the University has a young and well-trained staff, however, dissatisfied about the qualification and the capacitation policy of the institution. KEYWORDS: career; University; qualification. RESUMEN El objetivo de este artículo es comprender la percepción del personal administrativo en la formación de la política, la cualificación y la formación de una universidad federal del norte de Brasil. La metodología utilizada fue el estudio de caso con un enfoque cualitativo y cuantitativo. Los datos fueron recolectados a través de cuestionarios, que fueron contestadas por 323 servidores. Las categorías analizadas fueron: formación y cualificación política, el grado de conocimiento del personal técnico y administrativo con respecto a la carrera, y el nivel de satisfacción de estos servidores con su plan de desarrollo. Los datos mostraron que la universidad encuestados cuenta con una plantilla joven y bien entrenado, pero descontentos con la política de cualificación y formación de la institución. PALABRAS CLAVE: Universidad; carrera; cualificación.

scholarly journals Prevalence of Emotions and Basic Feelings in Higher Education, Case: ESPOCH Marketing Career

2021 ◽  
Author(s):  
W. Pilco ◽  
L. Vallejo
Keyword(s):  
Higher Education ◽  
Well Being ◽  
Education Students ◽  
Cross Sectional ◽  
Basic Emotions ◽  
Qualitative And Quantitative ◽  
Positive Feeling ◽  
Palabras Clave ◽  
High Level

This research aimed to determine the prevalence of basic emotions and feelings in higher education students, through a case study of students pursuing the marketing degree of the Polytechnic School of Chimborazo (ESPOCH). The research employed the MATEA model (fear, affection, sadness, anger and joy) and qualitative and quantitative approaches. The research design was descriptive, cross-sectional and non-experimental, and the methods used were inductive, deductive, analytical, synthetic and systemic. Data were collected through documentation and field review. The results indicated that there was a high level of fear, anger and joy in the students, a neutral level of sadness, and a positive feeling of affection. Given that anger and fear were identified at high levels in the students, we conclude that these feelings should be treated by ESPOCH’s Department of Well-being, Polytechnic and Psychology. Keywords: MATEA model, emotions, feelings, emotional codes. Resumen La investigación tiene como objetivo determinar la prevalencia de las emociones y sentimientos básicos en los estudiantes de educación superior, caso: Carrera de Mercadotecnia de la Escuela Superior Politécnica de Chimborazo (ESPOCH), se fundamenta en el modelo MATEA (miedo, afecto, tristeza, enojo y alegría) tiene un enfoque cualitativo y cuantitativo, de nivel descriptivo, de diseño transversal, no experimental, los métodos utilizados fueron inductivo, deductivo, analítico, sintético y sistémico en el proceso de revisión documental y de campo desarrollados en la presentación de resultados, discusión y conclusiones. Los resultados determinaron el sentimiento miedo su nivel es alto; el sentimiento afecto es positivo, el sentimiento tristeza se encuentra en nivel neutro, el sentimiento enojo su nivel es alto, el sentimiento alegría fue alto. Se concluye que los sentimientos enojo y miedo fueron identificados altos en los estudiantes, se recomienda que estos sentimientos deben ser tratados por los departamentos Bienestar Estudiantil Politécnico y Psicología de la ESPOCH. Palabras clave: modelo MATEA, emociones, sentimientos, códigos emocionales.

Construction of plastic contact deformation maps on ceramics: a case study on aluminum nitride

1996 ◽  
Vol 54 ◽  
pp. 636-637
Author(s):  
D. L. Callahan
Keyword(s):  
Plastic Deformation ◽  
Aluminum Nitride ◽  
Mechanical Response ◽  
Three Dimensional ◽  
Bright Field Image ◽  
Perfectly Plastic ◽  
Contrast Analysis ◽  
Deformation Patterns

Modern polishing, precision machining and microindentation techniques allow the processing and mechanical characterization of ceramics at nanometric scales and within entirely plastic deformation regimes. The mechanical response of most ceramics to such highly constrained contact is not predictable from macroscopic properties and the microstructural deformation patterns have proven difficult to characterize by the application of any individual technique. In this study, TEM techniques of contrast analysis and CBED are combined with stereographic analysis to construct a three-dimensional microstructure deformation map of the surface of a perfectly plastic microindentation on macroscopically brittle aluminum nitride.The bright field image in Figure 1 shows a lg Vickers microindentation contained within a single AlN grain far from any boundaries. High densities of dislocations are evident, particularly near facet edges but are not individually resolvable. The prominent bend contours also indicate the severity of plastic deformation. Figure 2 is a selected area diffraction pattern covering the entire indentation area.

Drowning in negativism, self-hate, doubt, madness: Linguistic insights into Sylvia Plath’s experience of depression

2015 ◽  
Vol 11 (1) ◽  
pp. 41-54 ◽  
Author(s):  
Zsófia Demjén
Keyword(s):  
Lived Experience ◽  
Medical Humanities ◽  
Sylvia Plath ◽  
Individual Experience ◽  
Qualitative And Quantitative ◽  
The World ◽  
The Individual ◽  
Linguistic Methods ◽  
Linguistic Approach

This paper demonstrates how a range of linguistic methods can be harnessed in pursuit of a deeper understanding of the ‘lived experience’ of psychological disorders. It argues that such methods should be applied more in medical contexts, especially in medical humanities. Key extracts from The Unabridged Journals of Sylvia Plath are examined, as a case study of the experience of depression. Combinations of qualitative and quantitative linguistic methods, and inter- and intra-textual comparisons are used to consider distinctive patterns in the use of metaphor, personal pronouns and (the semantics of) verbs, as well as other relevant aspects of language. Qualitative techniques provide in-depth insights, while quantitative corpus methods make the analyses more robust and ensure the breadth necessary to gain insights into the individual experience. Depression emerges as a highly complex and sometimes potentially contradictory experience for Plath, involving both a sense of apathy and inner turmoil. It involves a sense of a split self, trapped in a state that one cannot overcome, and intense self-focus, a turning in on oneself and a view of the world that is both more negative and more polarized than the norm. It is argued that a linguistic approach is useful beyond this specific case.

Integrating The Geophysical Characterization Of Seismic Thin Beds With Stochastic Reservoir Modeling: A Case Study From The Kutei Basin (Offshore Kalimantan, Indonesia)

2011 ◽  
Author(s):  
Giorgio Rocco Cavanna ◽  
Ernesto Caselgrandi ◽  
Elisa Corti ◽  
Alessandro Amato del Monte ◽  
Massimo Fervari ◽  
...  
Keyword(s):  
Reservoir Modeling ◽  
Geophysical Characterization

Perancangan dan Pembuatan Alat Bantu Meja Putar untuk Mesin Cnc 4 Axis

2016 ◽  
Vol 10 (2) ◽  
pp. 162-171
Author(s):  
Hafid Hafid ◽  
Tatang Sutisna
Keyword(s):  
Processing Time ◽  
Rotary Table ◽  
Engineering Process ◽  
Cnc Machine ◽  
Economical Analysis ◽  
Machining Center ◽  
Design And Manufacturing ◽  
The Cost ◽  
Productivity And Competitiveness

The design and manufacturing of the rotary table with the specification Ø 170 mm (6 inches) for CNC machine 4 axis has been done. The objective of manufacturing a rotary table is to increase the efficiency of CNC machine Hardford 4 axis to be above 80% in line machining center CV. IM’s workshop. The engineering methods was taken, consist of: working preparation, manufacturing of working drawing, engineering process, the manufacturing and testing. The prototype has been tested and operated, the resulting of increasing productivity of which were as follows: the process of assembling was increased to be 3 time ( before 1 time) and processing time for a specific case reduced from 5 hours to 3 hours, number of operators for the case of assembling the rotary reduced to 1 person (before 4 persons), safety and security become to be better. The results show increased efficiency of CNC machine Hardford, from under 50% to be above 80%. Based on the economical analysis obtained by the cost of good sold (C.G.S) of the rotary table is IDR 34.060.000. The results presented in this paper is expected to be case study for developing a business of the metal and engineering SMEs domestic to the effort of improving efficiency, quality, productivity and competitiveness in global market.ABSTRAKPerancangan dan pembuatan alat bantu meja putar (rotary table) dengan spesifikasi teknis Ø 170 mm (6 inci) untuk mesin CNC 4 axis telah dilakukan. Tujuan pembuatan rotary table adalah untuk meningkatkan efisiensi mesin CNC Hardford 4 axis di atas 80% pada line machining center Bengkel CV. IM. Metode rancang bangun yang dilakukan, meliputi: persiapan kerja, pembuatan gambar kerja, proses engineering, pembuatan dan uji coba. Prototip tersebut telah diuji coba dan dioperasikan dengan hasil peningkatan produktivitas sebagai berikut: proses pengerjaan bongkar pasang meningkat menjadi 3 kali (sebelumnya 1 kali) dan waktu pengerjaan untuk kasus tertentu berkurang dari 5 jam menjadi 3 jam, jumlah operator untuk kasus bongkar pasang rotary berkurang menjadi 1 orang (sebelumnya 4 orang), keselamatan kerja dan keamanan menjadi lebih baik. Hasil peningkatan berupa efisiensi mesin CNC Hardford 4 axis dari sebelumnya di bawah 50% menjadi di atas 80%. Berdasarkan hasil perhitungan analisis ekonomi diperoleh harga pokok produksi (HPP) alat bantu meja putar adalah sebesar Rp. 34.060.000. Bahasan ini diharapkan menjadi contoh kasus bagi pengembangan usaha IKM logam dan mesin dalam negeri untuk meningkatkan efisiensi, mutu, produktivitas dan keunggulan daya saing di pasar global.Kata kunci: alat bantu meja putar, mesin CNC, harga pokok produksi

Sign in / Sign up

Export Citation Format

Share Document