scholarly journals Comparison of Microleakage of Pedo Jacket Crowns and Stainless Steel Crowns Cemented with Different Cements

2019 ◽  
Author(s):  
Mona Sohrabi ◽  
Sara Ghadimi ◽  
Bahman Seraj
Keyword(s):  
Stainless Steel ◽  
Mean Value ◽  
Resin Cement ◽  
Glass Ionomer ◽  
Luting Cements ◽  
Group 4 ◽  
Tooth Preparation ◽  
Group 2 ◽  
Group 1

Objectives: This study aimed to assess the microleakage of Pedo Jacket crowns compared to stainless steel crowns (SSCs) cemented with different luting cements. Materials and Methods: In this in-vitro experimental study, 80 primary molars were randomly divided into four groups of 20 each. Groups 1 and 2 were subjected to standard tooth preparation for SSC. Crowns in group 1 were cemented with glass ionomer (GI), and crowns in group 2 were cemented with a resin-modified glass ionomer (RMGI) cement. In groups 3 and 4, minimal tooth preparation was performed for Pedo Jacket crowns, and the crowns were cemented with RMGI and Panavia resin cement, respectively. Microleakage was measured at mesial and distal surfaces in micrometers (µm), and the mean value for each tooth was calculated. One-way analysis of variance (ANOVA) was applied to compare the microleakage of the four groups. Results: Group 3 (Pedo Jacket cemented with RMGI) showed the highest microleakage (1523.83±250.32 µm) with significant differences with the remaining three groups (P<0.001). Microleakage in group 4 (Pedo Jacket cemented with Panavia) was significantly lower than that in the other three groups (301.25±219.53 µm, P<0.001). Groups 1 (SSCs cemented with GI) and 2 (SSCs cemented with RMGI) were not significantly different in terms of microleakage (P=0.49) although group 1 showed slightly higher microleakage than group 2 (598.43±260.85 µm versus 500.25±124.74 µm). Conclusions: Pedo Jacket crowns can serve as an acceptable esthetic alternative to SSCs if cemented with resin cements.  

Microleakage of class II restoration with zirconia inlay: An in vitro study

2019 ◽  
pp. 61-67
Author(s):  
Xuan Anh Ngoc Ho ◽  
Anh Chi Phan ◽  
Toai Nguyen
Keyword(s):  
Glass Ionomer Cement ◽  
Class Ii ◽  
Resin Cement ◽  
Glass Ionomer ◽  
Resin Modified Glass Ionomer ◽  
Group 2 ◽  
Self Etch ◽  
Ionomer Cement ◽  
Group 1 ◽  
Composite Restoration

Background: Class II restoration with zirconia inlay is concerned by numerous studies about the luting coupling between zirconia inlay and teeth. The present study was performed to evaluate the microleakage of Class II zirconia inlayusing two different luting agents and compare to direct restoration using bulk fill composite. Aims: To evaluate the microleakage of Class II restorations using three different techniques. Materials and methods: The study was performed in laboratory with three groups. Each of thirty extracted human teeth was prepared a class II cavity with the same dimensions, then these teeth were randomly divided into 3 groups restored by 3 different approaches. Group 1: zirconia inlay cemented with self-etch resin cement (Multilink N); Group 2: zirconia inlay cemented with resin-modified glass ionomer cement (Fuji Plus); Group 3: direct composite restoration using bulk fill composite(Tetric N-Ceram Bulk Fill). All restorations were subjected to thermal cycling (100 cycles 50C – 55 0C), then immersed to 2% methylene blue solution for 24 hours. The microleakage determined by the extent of dye penetration along the gingival wall was assessed using two methods: quantitative and semi-quantitative method. Results: Among three types of restorations, group 1 demonstrated the significantly lower rate of leakage compared to the others, while group 2 and 3 showed no significant difference. Conclusion: Zirconia inlay restoration cemented with self-etch resin cement has least microleakage degree when compare to class II zirconia inlay restoration cemented with resin-modified glass ionomer cement and direct composite restoration using bulk fill composite. Key words: inlay, zirconia ceramic, class II restoration, microleakage.

scholarly journals THU0227 CAFFEINE INTAKE MODULATES DISEASE ACTIVITY AND CYTOKINES LEVELS IN SYSTEMIC LUPUS ERYTHEMATOSUS PATIENTS

2020 ◽  
Vol 79 (Suppl 1) ◽  
pp. 340.2-341
Author(s):  
V. Orefice ◽  
F. Ceccarelli ◽  
C. Barbati ◽  
R. Lucchetti ◽  
G. Olivieri ◽  
...  
Keyword(s):  
Disease Activity ◽  
Lupus Erythematosus ◽  
Caffeine Intake ◽  
Caffeine Consumption ◽  
Group 4 ◽  
Group 3 ◽  
Group 2 ◽  
The Impact ◽  
Group 1

Background:Systemic lupus erythematosus (SLE) is an autoimmune disease mainly affecting women of childbearing age. The interplay between genetic and environmental factors may contribute to disease pathogenesis1. At today, no robust data are available about the possible contribute of diet in SLE. Caffeine, one of the most widely consumed products in the world, seems to interact with multiple components of the immune system by acting as a non-specific phosphodiesterase inhibitor2.In vitrodose-dependent treatment with caffeine seems to down-regulate mRNA levels of key inflammation-related genes and similarly reduce levels of different pro-inflammatory cytokines3.Objectives:We evaluated the impact of caffeine consumption on SLE-related disease phenotype and activity, in terms of clinimetric assessment and cytokines levels.Methods:We performed a cross-sectional study, enrolling consecutive patients and reporting their clinical and laboratory data. Disease activity was assessed by SLE Disease Activity Index 2000 (SLEDAI-2k)4. Caffeine intake was evaluated by a 7-day food frequency questionnaire, including all the main sources of caffeine. As previously reported, patients were divided in four groups according to the daily caffeine intake: <29.1 mg/day (group 1), 29.2-153.7 mg/day (group 2), 153.8-376.5 mg/day (group 3) and >376.6 mg/day (group 4)5. At the end of questionnaire filling, blood samples were collected from each patient to assess cytokines levels. These were assessed by using a panel by Bio-Plex assays to measure the levels of IL-6, IL-10, IL-17, IL-27, IFN-γ, IFN-α and Blys.Results:We enrolled 89 SLE patients (F/M 87/2, median age 46 years, IQR 14; median disease duration 144 months, IQR 150). The median intake of caffeine was 195 mg/day (IQR 160.5). At the time of the enrollment, 8 patients (8.9%) referred a caffeine intake < 29.1 mg/day (group 1), 27 patients (30.3%) between 29.2 and 153.7 mg/day (group 2), 45 patients (51%) between 153.8 and 376.5 mg/day (group 3) and 9 patients (10.1%) >376.6 mg/day (group 4). A negative correlation between the levels of caffeine and disease activity, evaluated with SLEDAI-2K, was observed (p=0.01, r=-0.26). By comparing the four groups, a significant higher prevalence of lupus nephritis, neuropsychiatric involvement, haematological manifestations, hypocomplementemia and anti-dsDNA positivity was observed in patients with less intake of caffeine (figure 1 A-E). Furthermore, patients with less intake of caffeine showed a significant more frequent use of glucocorticoids [group 4: 22.2%,versusgroup 1 (50.0%, p=0.0001), group 2 (55.5%, p=0.0001), group 3 (40.0%, p=0.009)]. Moving on cytokines analysis, a negative correlation between daily caffeine consumption and serum level of IFNγ was found (p=0.03, r=-0.2) (figure 2A); furthermore, patients with more caffeine intake showed significant lower levels of IFNα (p=0.02, figure 2B), IL-17 (p=0.01, figure 2C) and IL-6 (p=0.003, figure 2D).Conclusion:This is the first report demonstrating the impact of caffeine on SLE disease activity status, as demonstrated by the inverse correlation between its intake and both SLEDAI-2k values and cytokines levels. Moreover, in our cohort, patients with less caffeine consumption seems to have a more severe disease phenotype, especially in terms of renal and neuropsychiatric involvement. Our results seem to suggest a possible immunoregulatory dose-dependent effect of caffeine, through the modulation of serum cytokine levels, as already suggested byin vitroanalysis.References:[1]Kaul et alNat. Rev. Dis. Prim.2016; 2. Aronsen et alEurop Joul of Pharm2014; 3. Iris et alClin Immun.2018; 4. Gladman et al J Rheumatol. 2002; 5. Mikuls et alArth Rheum2002Disclosure of Interests:Valeria Orefice: None declared, Fulvia Ceccarelli: None declared, cristiana barbati: None declared, Ramona Lucchetti: None declared, Giulio Olivieri: None declared, enrica cipriano: None declared, Francesco Natalucci: None declared, Carlo Perricone: None declared, Francesca Romana Spinelli Grant/research support from: Pfizer, Consultant of: Novartis, Gilead, Lilly, Sanofi, Celgene, Speakers bureau: Lilly, cristiano alessandri Grant/research support from: Pfizer, Guido Valesini: None declared, Fabrizio Conti Speakers bureau: BMS, Lilly, Abbvie, Pfizer, Sanofi

scholarly journals Evaluation of Gingival Microleakage in Class II Composite Restorations with Different Lining Techniques: An In Vitro Study

Scientifica ◽  
2015 ◽  
Vol 2015 ◽  
pp. 1-6
Author(s):  
Vedavathi Bore Gowda ◽  
B. V. Sreenivasa Murthy ◽  
Swaroop Hegde ◽  
Swapna Devarasanahalli Venkataramanaswamy ◽  
Veena Suresh Pai ◽  
...  
Keyword(s):  
Study Groups ◽  
Class Ii ◽  
Composite Liner ◽  
Flowable Composite ◽  
Composite Restorations ◽  
Group 4 ◽  
Group 3 ◽  
Group 2 ◽  
Group 1

Aim. To compare the microleakage in class II composite restorations without a liner/with resin modified glass ionomer and flowable composite liner.Method. Forty standardized MO cavities were prepared on human permanent mandibular molars extracted for periodontal reasons and then divided into 4 groups of ten specimens. The cavity preparations were etched, rinsed, blot dried, and light cured and Adper Single Bond 2 is applied. Group 1 is restored with Filtek P60 packable composite in 2 mm oblique increments. Group 2 is precure group where 1 mm Filtek Z350 flowable liner is applied and light cured for 20 sec. Group 3 is the same as Group 2, but the liner was cocured with packable composite. In Group 4, 1 mm RMGIC, Fuji Lining LC is applied and cured for 20 sec. All the teeth were restored as in Group 1. The specimens were coated with nail varnish leaving 1 mm around the restoration, subjected to thermocycling, basic fuchsin dye penetration, sectioned mesiodistally, and observed under a stereomicroscope.Results. The mean leakage scores of the individual study groups were Group 1 (33.40), Group 2 (7.85), Group 3 (16.40), and Group 4 (24.35). Group 1 without a liner showed maximum leakage. Flowable composite liner precured was the best.

scholarly journals Experimental Reproduction of Bovine Fetal Neospora Infection and Death with a Bovine Neospora Isolate

1994 ◽  
Vol 6 (2) ◽  
pp. 207-215 ◽  
Author(s):  
Bradd C. Barr ◽  
Joan D. Rowe ◽  
Karen W. Sverlow ◽  
Robert H. BonDurant ◽  
Alex A. Ardans ◽  
...  
Keyword(s):  
Uninfected Cell ◽  
In Utero ◽  
Pathogenic Potential ◽  
Group 4 ◽  
Fetal Infection ◽  
Group 3 ◽  
Group 2 ◽  
Protozoal Infection ◽  
Group 1

Studies were conducted to determine the pathogenic potential of the recently isolated bovine Neospora protozoa (BPA-1) for the bovine fetus. Cows chosen for study had Neospora titers < 160 using an indirect immunofluorescent antibody (IFA) test. Four experimental groups were studied. In group 1, 2 fetuses were inoculated in utero at 118 days gestation with culture-derived Neospora tachyzoites. A pregnant control cow was housed in the same pen, observed daily and screened serologically for evidence of exposure to Neospora. In group 2, 2 cows were infected with Neospora tachyzoites at 138 or 161 days gestation, and 1 control cow was given uninfected cell culture suspension simultaneously at 154 days gestation. Groups 3 (85 days gestation) and 4 (120 days gestation) each consisted of 2 cows infected with Neospora tachyzoites and 1 control cow given uninfected material at the same stage of gestation. Dead fetuses were surgically removed from the infected cows in group 1 on postinfection day (PID) 17. The histopathology was compatible with protozoal fetal infection, and protozoa were identified by immunohistochemistry. Viable fetuses were removed surgically from cows in group 2 on PID 28-30. The histopathology was compatible with protozoal fetal infection, protozoa were identified by immunoperoxidase techniques, and Neospora tachyzoites were reisolated in vitro from tissues of the 2 infected fetuses. In groups 3 and 4, the control fetus and 1 infected fetus were removed surgically between PID 26 and PID 33. The remaining infected cows were observed until fetal death or abortion occurred. In group 3, the fetus that was surgically removed from 1 infected cow had no pathologic abnormalities, and parasites were not found (PID 26). The second fetus in group 3 died in utero, and expulsion of a mummified fetus was induced on PID 67. Brain histopathology was compatible with protozoal infection, and parasites were identified by immunoperoxidase techniques. The fetus that was surgically removed (PID 32) from 1 infected cow in group 4 had lesions compatible with protozoal infection, and Neospora tachyzoites were reisolated in vitro from fetal tissues. The second infected cow in group 4 produced a full-term live calf that had a precolostral Neospora titer of 20,480. Clinically, this calf had depressed conscious proprioception in all limbs. Very mild lesions were found in the central nervous system, but protozoa were not found in the tissues. The results demonstrate that the bovine Neospora protozoa can be transplacentally transmitted, resulting in fetal infection and death, and mimics the naturally occurring fetal disease.

scholarly journals Association Between Serum Oestradiol Level on the Human Chorionic Gonadotrophin Administration Day and Neonatal Birthweight After in Vitro Fertilization-embryo Transfer: A Retrospective Study of 3659 Singleton Live Births

2020 ◽  
Author(s):  
Yu Liu ◽  
Jing Li ◽  
Yihong Guo
Keyword(s):  
Retrospective Study ◽  
Chorionic Gonadotrophin ◽  
Human Chorionic Gonadotrophin ◽  
Vitro Fertilization ◽  
Group 4 ◽  
Group 3 ◽  
Group 2 ◽  
Ivf Et ◽  
Group 1

Abstract BackgroundOestradiol, an important hormone in follicular development and endometrial receptivity, is closely related to clinical outcomes of fresh in vitro fertilization-embryo transfer (IVF-ET) cycles. A supraphysiologic E2 level is inevitable during controlled ovarian hyper-stimulation (COH), and its effect on the outcome of IVF-ET is controversial. The aim of this retrospective study is to evaluate the association between elevated serum oestradiol (E2) levels on the day of human chorionic gonadotrophin (hCG) administration and neonatal birthweight after IVF-ET cycles.MethodsThe data of 3659 infertile patients with fresh IVF-ET cycles were analysed retrospectively between August 2009 and February 2017 in First Hospital of Zhengzhou University. Patients were categorized by serum E2 levels on the day of hCG administration into six groups: group 1 (serum E2 levels≤1000 pg/mL, n=230), group 2 (serum E2 levels between 1001 and 2000 pg/mL, n=524), group 3 (serum E2 levels between 2001 and 3000 pg/mL, n=783), group 4 (serum E2 levels between 3001 and 4000 pg/mL, n = 721), group 5 (serum E2 levels between 4001 and 5000 pg/mL, n=548 ), and group 6 (serum E2 levels > 5000 pg/mL, n=852). Univariate linear regression was used to evaluate the independent correlation between each factor and outcome index. Multiple logistic regression was used to adjust for confounding factors.ResultsThe LBW rates were as follows: 3.0% (group 1), 2.9% (group 2), 1.9% (group 3), 2.9% (group 4), and 2.0% (group 6) (P =0.629), respectively. There were no statistically significant differences in the incidences of neonatal LBW among the six groups. We did not detect an association between peak serum E2 level during ovarian stimulation and neonatal birthweight after IVF-ET.ConclusionThe results of this retrospective cohort study showed that serum E2 peak levels during ovarian stimulation were not associated with birth weight during IVF cycles. In addition, no association was found between higher E2 levels and increased LBW risk. Our observations suggest that the hyper-oestrogenic milieu during COS does not seem to have adverse effects on the birthweight of offspring after IVF.

scholarly journals In vitro evaluation of apical sealing in root apex treated with demineralization agents and retrofiled with mineral trioxide aggregate through marginal dye leakage

2005 ◽  
Vol 16 (3) ◽  
pp. 187-191 ◽  
Author(s):  
Claudio Hideki Kubo ◽  
Ana Paula Martins Gomes ◽  
Maria Nadir Gasparoto Mancini
Keyword(s):  
Mineral Trioxide Aggregate ◽  
Root Apex ◽  
Solution Ph ◽  
Significance Level ◽  
Group 4 ◽  
Group 3 ◽  
Group 2 ◽  
Agent Group ◽  
Group 1

The purpose of this study was to evaluate the apical seal in root apex treated with different demineralization agents and retrofilled with mineral trioxide aggregate (MTA) using marginal dye leakage. Fifty-six, human single-rooted teeth were instrumented, filled, resected and had retrofilling cavities prepared with ultrasonic tips. Demineralizing agents were applied before the apical cavities were retrofilled with Pro Root MTA. The specimens were assigned to 4 groups (n=14), as follows: group 1 (no demineralizing agent); group 2 (35% phosphoric acid, for 15 s); group 3 (17% EDTA solution, pH 7, for 3 min); and group 4 (24% EDTA gel, pH 7, for 4 min). The extension of dye (2% rhodamine B, at 37°C, for 24 h) penetration was measured in millimeters using a stereomicroscope. Results were statistically analyzed by ANOVA and Tukey's test at 5% significance level. Among the experimental groups, the least extension of dye penetration was observed in group 1 (1.89 mm), followed by groups 2 (2.18 mm), 4 (2.54 mm) and 3 (2.64 mm). No statistically significant differences (p<0.05) were found in marginal microleakage among groups 1, 2 and 4 and groups 2, 3 and 4. Based on the results obtained in this study, it may be concluded that the application of demineralizing agents cannot be recommended when MTA is used in periradicular surgeries.

Bond Integrity of Titanium Surface to Resin Cement After Conditioning with Different Photobiomodulataion Therapy (PBT)

2021 ◽  
Vol 11 (5) ◽  
pp. 970-975
Author(s):  
Khold Al Ahdal ◽  
Laila Al Deeb ◽  
Mohammed S. Bin-Shuwaish ◽  
Rana S. Al-Hamdan ◽  
Modhi Al Deeb ◽  
...  
Keyword(s):  
Titanium Alloy ◽  
Testing Machine ◽  
Resin Cement ◽  
Control Group ◽  
Sem Images ◽  
Group 4 ◽  
Modes Of Failure ◽  
Group 5 ◽  
Group 2 ◽  
Group 1

The aim of the present study was to evaluate the efficacy of interfacial bonding between resin cement and titanium alloy conditioned with different Photobiomodulataion Therapy (PBT) in comparison with conventional regimes. Seventy-five samples of titanium bar were segmented polished; and based on conditioning regime divided into five groups (15 each specimens). Group 1: No treatment (control), Group 2: Sand blasting with 120 µm Al2O3, Group 3: Er,Cr:YSGG (ECL), Group 4: Er:YAG laser (EYL), Group 5: Nd:YAG laser (NYL). After different conditioning regimes, resin cement was mixed and applied. All specimens were thermocycled for 500 cycles and positioned on universal testing machine for shear bond strength testing. Modes of failure was assessed by a single examiner using stereomicroscope at 40× magnification. Three pairs of specimens in each group were sputter coated and scanning electron microscope (SEM) images were taken at 1000× magnification using 20 Kv. The highest SBS values were observed in group 2 (14.25±2.29 MPa) and the lowest bond values were displayed in group 1 (6.98 ±0.59 MPa). Titanium alloy abutments conditioned with different laser prototypes ECL (11.22±1.40 MPa), EYL (9.29±1.22 MPa) and NYL (9.12 ±1.84 MPa) exhibited comparable SBS (p > 0.05). Adhesive failures were primarily dominant among all experimental groups. Photo-biomodulation in the form of ECL lasers has the potential to be used as a supplement to sandblasting procedure in conditioning of cement retained titanium alloy implant abutments.

P5392Epicardium derived cells promote sympathetic ganglionic outgrowth towards myocardium in vitro

2019 ◽  
Vol 40 (Supplement_1) ◽  
Author(s):  
Y Ge ◽  
A M Smits ◽  
J C Van Munsteren ◽  
T Van Herwaarden ◽  
A M D Vegh ◽  
...  
Keyword(s):  
Neurite Outgrowth ◽  
Autonomic Innervation ◽  
Cardiac Damage ◽  
Group 4 ◽  
Group 3 ◽  
Cervical Ganglia ◽  
Group 2 ◽  
Group 1

Abstract Background The autonomic nerve system is essential to maintain homeostasis in the body. In the heart, autonomic innervation is important for adjusting the physiology to the continuously changing demands such as stress responses. After cardiac damage, excessive neurite outgrowth, referred to as autonomic hyperinnervation, can occur which is related to ventricular arrhythmias and sudden cardiac death. The cellular basis for this hyperinnervation is as yet unresolved. Here we hypothesize a role for epicardium derived cells (EPDCs) in stimulating sympathetic neurite outgrowth. Purpose To investigate the potential role of adult EPDCs in promoting sympathetic ganglionic outgrowth towards adult myocardium. Method Fetal murine superior cervical ganglia were dissected and co-cultured with activated adult mesenchymal epicardium-derived cells (EPDCs) or/and adult myocardium in a 3D collagen gel culture system. Four experiment groups were included: Group 1: Vehicle cultures (ganglia cultured without EPDC/myocardium) (n=48); Group 2: ganglia co-cultured with EPDCs (n=38); Group 3: ganglia co-cultured with myocardium (n=95); and group 4: ganglia co-cultured with both EPDCs and myocardium (n=96). The occurrence of neurite outgrowth was assessed in each group. The density of neurites that showed directional sprouting (i.e. sprouting towards myocardium) was assessed as well with a semi-automatic quantification method. Finally, sub-analyses were made by taking gender into account. Results Cervical ganglia cultured with EPDCs alone (group 2) showed increased neurite outgrowth compared to vehicle cultures (group 1), however the neurites did not show directional sprouting towards EPDCs. When co-cultured with myocardium (group 3), directional neurite outgrowth towards myocardium was observed. Compared to the ganglia-myocardium co-cultures, directional outgrowth was significantly increased in co-cultures combining myocardium and EPDCs (group 4), and the neurite density was also significantly augmented. Comparison between males and female ganglia demonstrated that more neurite outgrowth occurred in female-derived ganglia than in male-derived ganglia under the same co-culture conditions. Conclusion Activated adult EPDCs promote sympathetic ganglionic outgrowth in vitro. Sex differences exist in the response of ganglia to EPDCs, and female-derived ganglia appear more sensitive to EPDC-signalling. Results support a role of EPDCs in cardiac autonomic innervation and open avenues for exploring of their role in ventricular hyperinnervation after cardiac damage.

scholarly journals Microleakage under Metallic and Ceramic Brackets Bonded with Orthodontic Self-Etching Primer Systems

2008 ◽  
Vol 78 (6) ◽  
pp. 1089-1094 ◽  
Author(s):  
Tancan Uysal ◽  
Mustafa Ulker ◽  
Sabri Ilhan Ramoglu ◽  
Huseyin Ertas
Keyword(s):  
Stainless Steel ◽  
Phosphoric Acid ◽  
White Spot Lesions ◽  
Group 4 ◽  
Ceramic Brackets ◽  
Group 3 ◽  
Group 2 ◽  
Ceramic Bracket ◽  
Acid Gel

Abstract Objective: To compare the in vitro microleakage of orthodontic brackets (metal and ceramic) between enamel-adhesive and adhesive-bracket interfaces at the occlusal and gingival sides produced by self-etching primer system with that of conventional acid etching and bonding. Materials and Method: Sixty freshly extracted human mandibular premolar teeth were used in this study. The teeth were separated into four groups of 15 teeth each and received the following treatments: Group 1, 37% phosphoric acid gel + Transbond XT liquid primer + stainless steel bracket; Group 2, Transbond Plus Self-Etching Primer (TSEP) + stainless steel bracket; Group 3, 37% phosphoric acid gel + Transbond XT liquid primer + ceramic bracket; Group 4, TSEP + ceramic bracket. After curing, specimens were further sealed with nail varnish, stained with 0.5% basic fuchsine for 24 hours, sectioned and examined under a stereomicroscope, and scored for microleakage for the enamel-adhesive and bracket-adhesive interfaces from both occlusal and gingival margins. Statistical analyses were performed using Kruskal-Wallis and Mann-Whitney U tests. Results: The gingival sides in all groups exhibited higher microleakage scores compared with those observed in occlusal sides for both adhesive interfaces. Enamel-adhesive interfaces exhibited more microleakage than did the adhesive-bracket interfaces. Brackets bonded with self-etching primer system showed significantly higher microleakage at the enamel-adhesive interface of the gingival side. Conclusions: TSEP causes more microleakage between enamel-adhesive interfaces, which may lead to lower bond strength and/or white-spot lesions.

Retentive Strength of Luting Cements for Stainless Steel Crowns: An in vitro Study

2010 ◽  
Vol 34 (4) ◽  
pp. 309-312 ◽  
Author(s):  
Priya Subramaniam ◽  
Sapna Kondae ◽  
Kamal Kishore Gupta
Keyword(s):  
Stainless Steel ◽  
Testing Machine ◽  
Glass Ionomer Cement ◽  
Resin Cement ◽  
Glass Ionomer ◽  
Adhesive Resin ◽  
Luting Cements ◽  
Resin Modified Glass Ionomer ◽  
To Receive ◽  
Ionomer Cement

The present study evaluated and compared the retentive strength of three luting cements. A total of forty five freshly extracted human primary molars were used in this study. The teeth were prepared to receive stainless steel crowns. They were then randomly divided into three groups, of fifteen teeth each, so as to receive the three different luting cements: conventional glass ionomer, resin modified glass ionomer and adhesive resin. The teeth were then stored in artificial saliva for twenty four hours. The retentive strength of the crowns was determined by using a specially designed Instron Universal Testing Machine (Model 1011). The data was statistically analyzed using ANOVA to evaluate retentive strength for each cement and Tukey test for pair wise comparison. It was concluded that retentive strength of adhesive resin cement and resin modified glass ionomer cement was significantly higher than that of the conventional glass ionomer cement.

Sign in / Sign up

Export Citation Format

Share Document