scholarly journals Proximate composition and sensory characteristics of refractance window dried cowpea composite porridges

2021 ◽  
Vol 21 (105) ◽  
pp. 18965-18979
Author(s):  
MS Wasswa ◽  
◽  
R Fungo ◽  
JH Muyonga ◽  
Keyword(s):  
Proximate Composition ◽  
Dietary Fibre ◽  
Health Concern ◽  
Composite Flour ◽  
Maize Flour ◽  
Composite Flours ◽  
Leaf Powder ◽  
Factor Design ◽  
Drying Technology ◽  
Flour Blends

Undernutrition is a major public health concern in Uganda. Locally available nutrient dense diets can help reduce the problem of undernutrition. Utilisation of cowpea leaf powder in preparing composite porridge blends depends on sensory acceptance of the consumers. A Nutrisurvey software was used to formulate two composite flour blends, namely maize and millet in a ratio 2:8 and cowpea-maize in a ratio of 1:9 to achieve the daily requirement of protein for children. The study developed a process for the production of composite cowpea flour from finger millet flour and maize flour and followed a one factor design in which maize flour (MF) and millet flour (MMF) was substituted with cowpea leaves flour (CPL). The composites were dried using refractance window drying technology. The proximate composition of the composite flours were determined using standard methods while sensory acceptability of porridges was rated on a five-point Likert scale using an untrained panel. Results indicated a significant (p < 0.05) increase in protein (10.9 to 13.4%), dietary fibre (11.01 to 13.0%) and lipids (4.71 to 5.3%) contents for cowpea-millet composite porridge. For cowpea-maize composite flour, a significant (p < 0.05) increase in protein (5.9 to 7.6%), dietary fibre (1.47 to 3.3%) and lipids (2.84 to 3.3%) was also observed. Sensory evaluation indicated that between the two composite porridges, the cowpea-millet porridge blend was significantly (P≤0.05) more appealing in terms of colour (3.61±0.8), aroma (2.96±0.2), taste (3.24±0.6), texture (3.62±0.6) and general acceptability (3.61±0.8) to the panellists than the cowpea-maize porridge blend. The cowpea-millet and cowpea-maize composite flours can contribute more than 100% of the recommended dietary allowance of protein and carbohydrate requirements for children aged 0-8 years. The study findings indicate that the cowpea-based composite flours have the potential to make a significant contribution to the improvement in the nutritional status of infants and children in developing countries.

scholarly journals Functional and Pasting Properties of Composite Flours from Triticum durum, Digitaria exilis, Vigna unguiculata and Moringa oleifera Powder

2020 ◽  
pp. 40-49
Author(s):  
C. A. Orisa ◽  
S. U. Udofia
Keyword(s):  
Vigna Unguiculata ◽  
Triticum Durum ◽  
Moringa Oleifera ◽  
Pasting Properties ◽  
Composite Flour ◽  
Oil Absorption ◽  
Composite Flours ◽  
Leaf Powder ◽  
Gelation Concentration ◽  
Flour Blends

The objective of this study was to determine the functional and pasting properties of composite flours from Triticum durum (wheat), Digitaria exilis (acha), Vigna unguiculata (cowpea) flours and Moringa oleifera leaf powder. The flour samples were mixed in a four by four factorial, in complete randomized design (CRD) to formulate the composite blends at four different levels (25, 50, 75 and 100) which gave 16 samples. The statistical analysis of data collected was used to select five (5) generally accepted composite flour samples (wheat, acha, cowpea and moringa oleifera leaf powder flours) with ratio of 100:0:0:0, 75:25:0:0, 0:50:50:0, 50:23:25:2 and 75:25:0:0, respectively. The flour samples were analyzed for functional and pasting properties using standard methods. Results of the functional properties showed that water absorption capacity of the composite flour blend ranged from 0.87-1.11g/g, bulk density 0.39-0.42 g/ml, least gelation concentration 2.00-4.00%, solubility 19.46-25.35%, wettability 2.57-4.02min, oil absorption 1.61-1.79g/g and least gelation temperature 62.00-68.50oC. The functionality of the composite flours such as water and oil absorption capacities, least gelation concentration and bulk density were improved when cowpea was incoporated into the blends than for moringa oleifera leaf powder and acha flour. On the other hand, wettability and solubility of the flour blends were improved when acha was incorporated into the blend. Results of pasting properties showed that peak viscosity ranged from 73.04-385.79RVU, trough viscosity 57.96-341.42RVU, break down viscosity 15.08-44.38RVU, final viscosity 109.54-581.58RVU, set back viscosity 51.58-240.17RVU, pasting time 5.70-6.40min and pasting temperature 50.08oC-50.35oC. These properties were shown to be higher when cowpea was incorporated into the flour blends than for moringa oleifera leaf powder and acha flour. However, pasting properties of the composite flour blends were higher than 100% wheat flour. This result therefore showed that composite flour from wheat, acha, cowpea and Moringa oleifera leaf powder has improved functionality and high pasting properties than the individual wheat flour and will serve as a useful ingredient in food formulations such as in dough, soups and baked products.

scholarly journals Evaluation of Various Properties of Amaranthus (Genus Amaranthus L.) Based Composite Flour Blends for Preparation of Gluten-Free Biscuits

2021 ◽  
Vol 13 (1) ◽  
pp. 57-68
Author(s):  
Muluken K. Kassa ◽  
Shimelis A. Emire
Keyword(s):  
Proximate Composition ◽  
Free Food ◽  
Quality Attributes ◽  
Pasting Properties ◽  
Absorption Capacity ◽  
Composite Flour ◽  
Gluten Free ◽  
Mineral Concentration ◽  
Composite Flours ◽  
Flour Blends

This research was conducted to investigate the pasting, rheological and functional properties, and gluten-free biscuit making potential of a composite flour prepared from grains of amaranthus, sorghum and finger millet. The formulation for the composite flour was obtained from D-optimal mixture design ratio using Design-Expert. The rheological and pasting properties of the composite flours were determined, while the proximate composition, physical dimensions, mineral concentration and sensory quality attributes of the biscuits were assessed. The results showed that there were significant (p&lt;0.05) differences in the pasting profile of the control and amaranthus based composites flour except for pasting temperature. Water absorption capacity and water soliblity index increased as the blending ratio of amaranthus flour increased, while oil absorption capacity decreased. The proximate composition evaluation 13.75, 2.04, 1.77 and 31.75% were found to be the highest values of the biscuit samples in terms of protein, crude fiber, ash and crude fat, respectively. Mineral analaysis was carried out and there was a significant (p&lt;0.05) difference in Fe, Ca, Zn and P content among the biscuit samples made from the composite flour blends. Similarly, the sensory evaluation indicated that there was a significant (p&lt;0.05) differences in apperance, colour, texture, flavour and overall acceptability among the composite biscuit samples. However, the difference was insignificant (p&lt;0.05) in crispiness of biscuit samples. In a nut shell this research revealed that a nutritionally dense gluten-free biscuits can be formulated without affecting the quality attributes of the biscuit. Thus, the composite flours can be used for the preparation of gluten free food products in africa, where the crops have not been effectively utilized in food processing industries.

scholarly journals EFFECTS OF ASCORBIC ACID AND SUGAR ON PHYSICAL, TEXTURAL AND SENSORY PROPERTIES OF COMPOSITE BREADS

2021 ◽  
Author(s):  
Marijana Simic
Keyword(s):  
Ascorbic Acid ◽  
Chemical Characterization ◽  
Sensory Properties ◽  
Total Phenolic ◽  
Composite Flour ◽  
Maize Flour ◽  
Compact Structure ◽  
Light Blue ◽  
Composite Flours ◽  
Sugar Addition

The present study was carried out to demonstrate the combined effects of different maize flour, ascorbic acid and sugar on the physical, textural and sensory properties of composite breads. The composite flour was prepared using 70% of wheat flour and 30% of flour obtained from grain of differently coloured maize - light blue, blue, red and yellow maize flour. Chemical characterization of composite flours made with four different types of maize was also assessed. Furthermore, the content of total phenolics, flavonoids, anthocyanins, phenolic acids and antioxidant capacity in composite flours was determined. The total of 12 breads that were prepared, four of which were control composite breads, four breads with ascorbic acid, and four were breads with ascorbic acid and sugar. The content of total phenolic compounds showed clear differences among all composite flours. The anthocyanins content determined in composite flours was in the following descending order: blue>red>light blue, while in the yellow maize composite flour anthocyanins were not detected. The results showed that the addition of AsA (0.025%) and sugar (5%) negatively affected the volume as well as the specific volume of composite wheat-maize breads. The texture analysis showed that the addition of AsA in amount of 0.025% had no impact on springiness, cohesiveness and resilience of bread crumb, while it increased crumb hardness. However, composite breads made with AsA and AsA and sugar showed a more compact structure, with a larger number of cells and smaller mean cell areas. Bread samples with AsA and sugar in the tested doses had the lowest springiness, which is indicative of brittleness and reflects the tendency of the bread to crumble when slicing. Results of the sensory evaluation revealed that the AsA and sugar addition had a generally positive effect on the investigated sensory attributes.

scholarly journals QUALITY ATTRIBUTES OF PANCAKES FROM PEELED AND UNPEELED SWEETPOTATO FLOURS WITH CASSAVA STARCH

2020 ◽  
Vol 18 (1) ◽  
pp. 88-102
Author(s):  
A. T. OMIDIRAN ◽  
O. A. ADERIBIGBE ◽  
O. P. SOBUKOLA ◽  
O. O. AKINBULE
Keyword(s):  
Functional Properties ◽  
Proximate Composition ◽  
Control Sample ◽  
Quality Attributes ◽  
Cassava Starch ◽  
Absorption Capacity ◽  
Composite Flour ◽  
Crude Fibre ◽  
Overall Acceptability ◽  
Flour Blends

This study evaluated some quality attributes of pancakes from peeled and unpeeled sweetpotato flours and cassava starch. Cassava starch was substituted up to 30% of the total composite flour. The proximate composition, colour, carotenoid and functional properties of the different flour blends were determined. The flour blends were processed into pancakes and the proximate composition and sensory acceptability of the pancakes were determined. Data obtained were subjected to analysis of variance. The result showed that they were significant differences (p<0.05) in the functional properties of the flour blends. Bulk density, Water absorption capacity, Oil absorption capacity, swelling capacity ranged from 0.70 to 0.78 g/ml, 1.87 to 2.30 g/ml, 1.02 to 1.40 g/ml and 5.18% to 6.66%  respectively. There were significant differences (p<0.05) in the proximate composition of the pancake samples. The values ranged from 42.76 to 45.53%, 2.13 to 3.98%, 9.06 to 10.34%, 5.01 to 7.18%, 3.75 to 6.01% and 29.19 to 35.33% for moisture, ash, fat, protein, crude fibre and carbohydrate contents, respectively. Pancake produced from 100:0 peeled and unpeeled sweetpotato flour had the highest score for overall acceptability which can compare favorably, with pancakes from wheat flour which is the control sample. In conclusion, sweetpotato flour blended with cassava starch at different ratio gave good proximate and functional properties which resulted in pancakes of good quality attributes.    

Proximate composition, pasting and functional properties of composite flour blends from cassava and chia seeds flour

2021 ◽  
pp. 108201322110694
Author(s):  
Ashura Katunzi-Kilewela ◽  
Leonard MP Rweyemamu ◽  
Lilian D Kaale ◽  
Oscar Kibazohi ◽  
Roman M Fortunatus
Keyword(s):  
Functional Properties ◽  
Proximate Composition ◽  
Pasting Properties ◽  
Absorption Capacity ◽  
Composite Flour ◽  
Peak Time ◽  
Swelling Capacity ◽  
Pasting Temperature ◽  
Gelation Concentration ◽  
Flour Blends

The study established the proximate composition, pasting, and functional properties of cassava flour (CF) blended with chia seeds flour (CSF). Composite flour was prepared by blending CF with CSF in the ratios of 95:05, 90:10, 85:15, 80:20, and 75:25 with CF and CSF used as controls, respectively. The effect of blending significantly (p < 0.05) increased protein, fat, fibre, and ash contents as CSF increased. On other hand, moisture and carbohydrate contents decreased significantly. Pasting properties of composite flour blends decreased significantly (p < 0.05) as the incorporation of CSF increased and a noticeable change was observed for composite flour (75:25) except for peak time and pasting temperature. Functional properties of water absorption capacity (WAC) of CSF were significantly different with CF and composite flour blends. Oil absorption capacity (OAC) of CF and CSF were significantly different, while the composite flour blends had varied OAC due to the inclusion of the different amounts of CSF. The swelling capacity (SC) of CF and CSF were not significantly different, but composite flour blends were significantly different from both CSF and CF. The least gelation concentration (LGC) and bulk density (BD) increased significantly as chia seeds increased. Increased concentration of chia CSF in the composite flour blends showed to alter the functional properties. This study recommends composite flour 75:25 for processing semiliquid products like porridge due to reduced pasting properties values that may be associated with increased energy density compared to CF.

scholarly journals Biscuit Making Potentials of Cooking Banana and Yellow Maize Flour Blends

2020 ◽  
pp. 25-31
Author(s):  
N. N. Umerah ◽  
A. I. Asouzu ◽  
N. M. Oly- Alawuba
Keyword(s):  
Nutrient Content ◽  
Composite Flour ◽  
Maize Flour ◽  
Overall Acceptability ◽  
High Nutrient ◽  
The Mean ◽  
Flour Blends ◽  
Cooking Banana ◽  
Biscuit Making ◽  
Colour Appearance

The study was carried out to determine the biscuit making potentials of cooking banana and yellow maize flour blends. Cooking banana and yellow maize were processed and milled into flour then blended for composite biscuit production. The samples were coded as follows; A=100:0, B=90:10, C= 80:20, D=70:30, E=60:40 and F=0:100 of maize and cooking banana respectively. All the samples were subjected to laboratory analysis for proximate and minerals using standard methods. Sensory properties of the biscuit were also evaluated by 20 panelist. Data was subjected to analysis of variance (ANOVA) using SPSS and the result recorded as mean ± standard deviation while the mean was separated using Duncan New Multiple Range (P<0.05). The results were 0.50 to 120.75% protein, 4.08 to 5.10% moisture, 3.45 to 7.15% fat, 2.13 to 3.68% fibre and 77.81 to 82.91% carbohydrate. The minerals were 0.50 to 120.75 mg Ca, 4.10 to 12.75 mg Fe, 124.66 to 176.10 mg Mg, 10.32 to 24.75 mg Na, 1.45 to 2.13 mg Zn and 50. 22 to 116.33 mg P. There was significant different (P≤0.05) in texture, colour, appearance, flavor and overall acceptability of biscuits made from the composite flour. The study has revealed that biscuits of high nutrient dense and acceptable organoleptic properties could be produced from yellow maize and cooking banana composite flour blends. The use of yellow maize and cooking banana flour in biscuits preparation resulted in significant improvement in the nutrient content of the composite biscuits.

scholarly journals Pasting Properties of Composite Flour Made from Sorghum, Millet and African Yam Bean

2021 ◽  
pp. 23-35
Author(s):  
J. N. Okafor ◽  
J. N. Ishiwu ◽  
J. E. Obiegbuna
Keyword(s):  
Water Absorption ◽  
Bulk Density ◽  
Pasting Properties ◽  
Absorption Capacity ◽  
Composite Flour ◽  
Water Absorption Capacity ◽  
African Yam Bean ◽  
Composite Flours ◽  
Gelation Concentration ◽  
Flour Blends

The aim of this research was to produce acceptable ‘fufu’ from a mixture of sorghum, millet, and African yam bean flours that will have a moderate carbohydrate and protein content with most optimized texture. The functional and sensory properties of flour blends produced from Sorghum, Millet and African yam bean was studied. Sorghum, Millet and African yam bean were processed into flour and mixed at different ratios to obtain composite flours. The flour formulations obtained were analyzed for water absorption capacity, bulk density, least gelation concentration , and viscosity .The  water absorption capacity ranged from 1.00 to 3.00,  the bulk density ranged from 0.56 to 0.82;the least gelation concentration ranged from 5.77 to 6.87,while the viscosity ranged from 0.956 to 9.30.Also proximate composition of the individual flours before formulation  was analyzed, it ranged from 6.13 to 8.46 moisture, 2.00 to 4.67 ash, 0.17 to 8.00 fiber,5.47 to 8.61 fat, 7.57 to 21.84 protein, 58.34 to 69.27 carbohydrate.The sensory values ranged from 5.60 to 6.45 for taste; 4.25 to 6.85  for colour; 5.15 to 6.80 for texture; 3.85 to 5.70 for aroma; 5.45 to 6.45 acceptability. Sample 10 (with the ratio of 40:70:20) had the highest rating for general acceptability. It was observed that sample 1(with the ratio of 60:50:60) had the lowest rating in taste and aroma. The mixture components that could produce optimum texture was determined through optimization plot. This work has demonstrated that acceptable ‘fufu’ with moderate protein and carbohydrate could be successfully produced using composite flours of sorghum, millet and African yam bean.

scholarly journals QUALITY ATTRIBUTES OF COOKIES PRODUCED FROM COMPOSITE FLOURS OF WHEAT, GERMINATED FINGER MILLET FLOUR AND AFRICAN YAM BEAN

2018 ◽  
Vol 6 (11) ◽  
pp. 172-183
Author(s):  
Abioye V.F ◽  
Olatunde S.J ◽  
Elias G
Keyword(s):  
Functional Properties ◽  
Finger Millet ◽  
Absorption Capacity ◽  
Composite Flour ◽  
Crude Fibre ◽  
African Yam Bean ◽  
Composite Flours ◽  
Calcium Phosphorus ◽  
Flour Blends ◽  
Locally Grown

Cookies are ready to eat convenient food for all ages and the consumption is on the increase in Nigeria due to urbanization which has led to increase in wheat importation. In order to reduce the effects of wheat importation on the economy, this study looked into the use of locally grown crops for production of cookies. Cookie samples were produced from blends of wheat flour, germinated finger millet and African yam bean. Different proportions of flour blends were obtained using design experts. The flour mixes were evaluated for the proximate, minerals composition, antinutrients and the functional properties while the sensory properties of the cookies were determined. The proximate composition of the composite flour varied from 12.20-12.54; 8.89-10.62; 1.31-1.65; 1.13-1.39; 1.82-1.48 and 74.33-72.66% for moisture, protein, fat, crude fibre, ash and carbohydrate content of the flour, respectively. The mineral content of the flour ranged from 9.064-9.10, 0.29- 0.32, 0.42-0.45, 0.24-0.28% for calcium, phosphorus, potassium and sodium, respectively. The anti-nutritional properties of the flour ranged from 0.0074 to 0.0098%, 0.1700 to 0.1990%, 0.0905 to 0.1080% and 1.2500 to 1.4900%, for tannin, phytate, oxalate and trysin inhibitor, respectively. The functional properties of the composite flour ranged from 0.66-0.67 g/ml; 25.87- 27.48 g/ml; 6.11-8.12 g/ml; 0.75- 0.83 g/ml; 106.65 to 124; 91.70-99.75 g/100g; for bulk density, water absorption capacity, oil water capacity, foaming capacity and foaming solubility, respectively. The sensory attributes studied were colour, taste, texture and crispness. This study has shown that there was a notable improvement on the nutritional and functional properties of the flour while there was reduction in the ant nutrients.

scholarly journals Evaluation of the Quality of Composite Maize-Wheat Chinchin Enriched with Rhynchophorous phoenicis

2016 ◽  
Vol 5 (4) ◽  
pp. 26 ◽  
Author(s):  
Ojinnaka, Dong ◽  
Emeh, T. C. ◽  
Okorie, S. U.
Keyword(s):  
Wheat Flour ◽  
Nutritional Quality ◽  
Absorption Capacity ◽  
Composite Flour ◽  
Maize Flour ◽  
Mineral Analysis ◽  
Palm Weevil ◽  
Significant Difference ◽  
Flour Blends

<p>The purpose of this research was to develop and evaluate a snack product (chin-chin) from composite maize-wheat flour blends enriched with edible palm weevil (<em>Rhyhnchophorus phoenicis</em>) paste. The maize-wheat chin-chin enriched with <em>R. phoenicis </em>were subjected to acceptability test using twenty member semi-trained panelist. The moisture, fat, protein and carbohydrate compositions of the snack samples had significant differences in their values. Sample 5M5R90W (containing 5% maize flour and <em>Rhyhnchophorus phoenicis </em>paste and 90% wheat flour) had the highest protein value of 19.05% while the least value 9.39% was obtained by sample 100M0R0W (100% maize flour alone). Sample 100M0R0W containing 100% maize flour also had the highest carbohydrate value of 75.24%. There was no significant difference in the ash and crude fiber contents of the chin-chin samples enriched with edible palm weevil paste. There were significant differences (P ≤ 0.05) in the functional properties of maize-wheat composite flour blends. Their wettability values ranged from 46.67 – 200 while the swelling index, bulk density and oil absorption capacity showed no significant difference in their values. The result of the mineral analysis showed phosphorus, magnesium and sodium had significant differences in their values in the range of 317.55 – 376.75mg/100g; 5.60 -13.60mg/100g;59.0 – 70.3mg/100g, respectively. There were no significant differences in the sensory attributes of the chin-chin samples. The result showed that an acceptable chin-chin product can be processed with the inclusion of the larva of edible palm weevil with maize-wheat composite flour to enhance the nutritional quality of the product.</p>

Sign in / Sign up

Export Citation Format

Share Document