scholarly journals Weed Management in Cotton: A Review

2021 ◽  
Author(s):  
A. Sathishkumar ◽  
G. Srinivasan ◽  
E. Subramanian ◽  
P. Rajesh

Cotton is one of the most important commercial crops in India. Cotton growth is very slow in the initial stages of its life cycle and row spacing is wider which provides ample space for the growth of different categories of weeds and thus become a source of competition for water as well as nutrients, thereby impeding its growth. Weeds are major constraints that reduce the crop yields since they compete with crop for the nutrients, moisture, light and space. The integration of different weed management practices would be a viable option for broad spectrum weed control and enhancement of cotton productivity. Thus, weed management has several aspects such as physical, mechanical, cultural, chemical and integrated weed management methods. A brief review of research accomplishment made at various places on different fields related to this investigation is reviewed in this paper.

Author(s):  
Suryakanta Kashyap ◽  
V.P. Singh ◽  
S.K. Guru ◽  
Tej Pratap ◽  
S.P. Singh ◽  
...  

Background: Weeds are the major threat to direct seeded rice and a single strategy of weed control may not be effective for season-long weed control. Intending to accomplish the long-term and sustainable weed management of direct seeded rice, the integration approach of weed management strategies seems a better alternative. The current field study was aimed to evaluate the impact of integration of different weed control methods on direct seeded rice under irrigated ecosystem on weed growth and rice yield. Methods: The experiment was laid out in randomized block design with three replications and twelve treatments during 2017 at G.B. Pant University of Agriculture and Technology, Pantnagar, Uttarakhand, India. The twelve treatments included the combination of cultural, mechanical, physical and chemical weed management methods. Result: Combination of stale seedbed technique integrated with pre-emergence application of pendimethalin with mechanical weeding at 25 DAS followed by 1 hand weeding at 45 DAS, Sesbania (line sowing) fb application of pendimethalin (PE) fb 1 mechanical weeding at 25 DAS fb 1 hand weeding at 45 DAS, stale seedbed with application of pendimethalin (PE) with Sesbania brown manuring supplemented with mechanical weeding (25 DAS) fb hand weeding at 45 DAS, mulching with wheat straw mulch along with post-emergence application of penoxsulam (20 DAS) fb 1 hand weeding at 45 DAS and application of pendimethalin (PE) fb penoxsulum (PoE) at 20 DAS fb 1 hand weeding at 45 DAS with a row spacing of 25 cm found to be similar in the suppression of weed population and weed density at 40 and 60 DAS and crop yields (4.3, 4.1, 4.2, 4.0 and 4.2 t/ha, respectively) were on par with weed free plot i.e. 4.4t/ha. Application of pendimethalin (PE) fb penoxsulum (PoE) at 20 DAS fb 1 hand weeding at 45 DAS with row spacing of 25cm recorded 93.7%, 90.6% and 4.5% weed control efficiency, weed control index and weed index respectively, which was similar with above integrated weed management treatments. A negative correlation of the weed density and dry matter with the yield of rice was recorded.


2004 ◽  
Vol 18 (4) ◽  
pp. 1006-1012 ◽  
Author(s):  
K. Neil Harker ◽  
George W. Clayton ◽  
John T. O'Donovan ◽  
Robert E. Blackshaw ◽  
F. Craig Stevenson

Herbicide-resistant canola dominates the canola market in Canada. A multiyear field experiment was conducted at three locations to investigate the effect of time of weed removal (two-, four-, or six-leaf canola) and herbicide rate (50 or 100% recommended) in three herbicide-resistant canola systems. Weeds were controlled in glufosinate-resistant canola (GLU) with glufosinate, in glyphosate-resistant canola (GLY) with glyphosate, and in imidazolinone-resistant canola (IMI) with a 50:50 mixture of imazamox and imazethapyr. Canola yields were similar among the three canola cultivar–herbicide systems. Yields were not influenced by 50 vs. 100% herbicide rates. Timing of weed removal had the greatest effect on canola yield, with weed removal at the four-leaf stage giving the highest yields in most cases. Percent dockage was often greater for GLU and IMI than for GLY. In comparison with the other treatments, dockage levels doubled for GLU after application at 50% herbicide rates. The consistency of monocot weed control was usually greater for GLY than for GLU or IMI systems. However, weed biomass data revealed no differences in dicot weed control consistency between IMI and GLY systems. Greater dockage and weed biomass variability after weed removal at the six-leaf stage or after low herbicide rates suggests higher weed seed production, which could constrain the adoption of integrated weed management practices in subsequent years.


1996 ◽  
Vol 76 (3) ◽  
pp. 537-544 ◽  
Author(s):  
F. C. Stevenson ◽  
A. T. Wright

Seeding rate and row spacing are management practices that affect flax seed yield. Two experiments were conducted from 1988 to 1990 to determine the influence of flax seeding rates (300, 600, and 900 seeds m−2) and row spacings (9, 18, and 27 cm). One was a flax-weed interference study (three sites) and the other was a weed-free study (13 sites). In the presence of weeds, increasing seeding rate from 300 to 900 seeds m−2 improved flax seed yield by 180 kg ha−1, and reduced broadleaf weed yields by 300 kg ha−1 and grassy weed yields by 180 kg ha−1. In weed-free conditions, seed yield was not affected by seeding rate. Row spacing did not affect flax yield and had minor effects on weed yields when weeds were not controlled. When weeds were controlled, seed yield in the 9-cm row spacing was 9% (15% in the flax-weed interference study) greater than in the two wider row spacings. Seeding rate and row spacing independently influenced flax yield, and their effect was consistent among sites with weeds present, but was not consistent when weeds were controlled. Our results showed that flax seeding rate was an important component of integrated weed management. Key words: Flax, seeding rate, row spacing, weed interference


Agriculture ◽  
2018 ◽  
Vol 8 (9) ◽  
pp. 138 ◽  
Author(s):  
Hilary Sandler

Integrated weed management (IWM) has been part of cranberry cultivation since its inception in the early 19th century. Proper site and cultivar selection, good drainage, rapid vine establishment, and hand weeding are as important now for successful weed management as when the industry first started. In 1940, Extension publications listed eight herbicides (e.g., petroleum-based products, inorganic salts and sulfates) for weed control. Currently, 18 herbicides representing 11 different modes of action are registered for use on cranberries. Nonchemical methods, such as hand weeding, sanding, flooding, and proper fertilization, remain integral for managing weed populations; new tactics such as flame cultivation have been added to the toolbox. Priority ratings have been developed to aid in weed management planning. Despite many efforts, biological control of weeds remains elusive on the commercial scale. Evaluation of new herbicides, unmanned aerial systems (UAS), image analysis, and precision agriculture technology; investigation of other management practices for weeds and their natural enemies; utilization of computational decision making and Big Data; and determination of the impact of climate change are research areas whose results will translate into new use recommendations for the weed control of cranberry.


2004 ◽  
Vol 44 (10) ◽  
pp. 993 ◽  
Author(s):  
R. S. Llewellyn ◽  
R. K. Lindner ◽  
D. J. Pannell ◽  
S. B. Powles

Greater adoption of integrated weed management, to reduce herbicide reliance, is an objective of many research and extension programmes. In Australian grain-growing regions, integrated weed management is particularly important for the management of herbicide resistance in weeds. In this study, survey data from personal interviews with 132 Western Australian grain growers are used to characterise the use and perceptions of integrated weed management practices. The main objective was to identify opportunities for improved weed management decision making, through targeted research and extension. The extent to which integrated weed management practices are used on individual farms was measured. Perceptions of the efficacy and reliability of various weed management practices were elicited for control of annual ryegrass (Lolium rigidum Gaud.), along with perceptions of the economic value of integrated weed management practices relative to selective herbicides. All growers were shown to be using several integrated weed management practices, although the use of some practices was strongly associated with the presence of a herbicide-resistant weed population. In general, both users and non-users were found to have high levels of awareness of integrated weed management practices and their weed control efficacy. Herbicide-based practices were perceived to be the most cost-effective. Opportunities for greater adoption of integrated weed management practices, to conserve the existing herbicide resource, exist where practices can be shown to offer greater shorter-term economic value, not necessarily just in terms of weed control, but to the broader farming system.


Weed Science ◽  
2017 ◽  
Vol 65 (4) ◽  
pp. 525-533 ◽  
Author(s):  
Collen Redlick ◽  
Hema S. N. Duddu ◽  
Lena D. Syrovy ◽  
Christian J. Willenborg ◽  
Eric N. Johnson ◽  
...  

Concern over the development of herbicide-resistant weeds has led to interest in integrated weed management systems that reduce selection pressure by utilizing mechanical and cultural weed control practices in addition to herbicides. Increasing crop seeding rate increases crop competitive ability and thus can enhance herbicide efficacy. However, it is unknown how increasing the seeding rate affects an herbicide’s efficacy. The objective of this study was to examine the interaction between increasing seeding rate and herbicide dose to control weeds. To meet this objective, the herbicide fluthiacet-methyl was applied to field-grown lentil, with Indian mustard, a proxy for wild mustard, used as a model weed. The experiment was a factorial design with four lentil seeding rates and seven herbicide rates. Overall the herbicide dose response was altered by changing lentil seeding rate. Increasing lentil seeding rate decreased the weed biomass production when herbicides were not applied. In two of the four site-years, increasing lentil seeding rate lowered the herbicide ED50, the dose required to result in a 50% reduction in weed biomass. Increasing the crop seeding rate altered the dose response to provide greater weed control at lower herbicide rates compared with normal crop seeding rates. Increased seeding rates also resulted in higher and more stable crop seed yields across a wider range of herbicide dosages. These results suggest that dose–response models can be used to evaluate the efficacy of other weed management practices that can interact with herbicide performance.


Author(s):  
Nano Alemu Daba ◽  
Janmejai Sharma

The experiment was conducted to assess the integrated effects of pre-emergence herbicides and hand-weeding on weed control, yield components, yield, and their economic feasibility for cost effective weed control in faba bean. The experiment consisted of 12 treatments viz. pre-emergence s-metolachlor (1.0, 1.5 and 2.0 kg ha-1) and pendimethalin (1.0, 1.25 and 1.5 kg ha-1), each at three rates metolachlor, s-metolachlor + one-hand-weeding, pendimethalin + one-hand-weeding, two-hand-weeding, complete weed free and weedy checks arranged. The weed flora consisted of broadleaved and sedge with the relative densities of 81.02 and 18.98 % at Haramaya district, and 80.83% and 19.17%, at Gurawa district, respectively. Application of s-metolachlor and pendimethalin 1.0 kg ha-1 each supplemented with hand weeding 5 WAE significantly (p ≤0.01) affected the broadleaved weeds, sedges and weed dry weight at both sites. S-metolachlor 1.0 kg ha-1 supplemented with hand weeding 5 WAE gave the lowest total number of weeds (8.29 m-2) following the weed free check. Higher grain yield (3555.8 kg ha-1) was produced with s-metolachlor 1.0 kg ha-1 supplemented with one-hand-weeding 5 WAE following complete weed-free at Gurawa. The benefit gained from s-metolachlor and pendimethalin at 1.0 kg ha-1 each supplemented with one hand weeding 5 WAE were greater than the value recorded from the weedy check by 216% and 198 %, respectively. S-metolachlor 1.0 kg ha-1 supplemented with hand weeding 5 WAE treatment resulted in the highest grain yield and economic benefit. However, in case labour is constraint and s-metolachlor herbicide is timely available, pre emergence application of s-metolachlor at 2.0 kg ha-1 should be the alternative to preclude the yield loss and to ensure maximum benefit.


Author(s):  
A. A. Ajala ◽  
A. Muhammad ◽  
A. I. Yakubu ◽  
H. Y. Sanda

Rice is a weak competitor against weeds and the majority of African farmers have few options and resources available for effective weed control. Weed control is one of the most important and suggestive practices for potential rice production. Field trials were carried out during 2017/2018 dry season at the Teaching and Research Fadama farm of the Kebbi State University of Science and Technology located at Jega (Latitude 12º21ˈN; Longitude 4º36ˈE) and that of Usmanu Danfodiyo University Sokoto located at Kwalkwalawa (Latitude 13º01ˈN, Longitude 5º09ˈE) to study the effects of integrated weed management (IWM) and variety on weed occurrence and the growth of rice. Both locations lie within Sudan Savanna ecological zone of Nigeria. The treatments consisted of six (6) weed management options (Solarization/Orizo-plus (3 WAT)/Hoe-weeding (6 WAT), Round-up/Orizo-plus (3 WAT)/Hoe-weeding (6WAT), Solarization/Hoe-weeding (3 WAT)/Hoe-weeding (6 WAT), Round-up/Hoe-weeding (3 WAT)/Hoe-weeding (6 WAT), Weedy-check and Weed-free) and three (3) rice varieties (Jamila, Faro 44 and Faro 57). The factorial combinations of the treatments were laid out in a randomized complete block design (RCBD) with the split-plot arrangement and were replicated three times. Weed management options formed the main plots while rice varieties were assigned to the sub-plots. The result of the study indicated that combination of solarization, orizo-plus and hoe-weeding achieved an effective weed control (33.56 g weed dry matter per m2) close to the weekly hoe-weeding (16.13 g weed dry matter per m2). Faro 57 variety was noted with the potential to increase rice growth under good weed management practices. From the results, it could be concluded that for increased rice growth, Faro 57 under the combination of solarization, orizo-plus and hoe-weeding IWM option should be adopted.


Author(s):  
Jevgenija Ņečajeva ◽  
Zane Mintāle ◽  
Ieva Dudele ◽  
Anda Isoda-Krasovska ◽  
Jolanta Čūrišķe ◽  
...  

<p class="R-AbstractKeywords"><span lang="EN-GB">Integrated weed management (IWM) is a complex approach to weed control that is based on use of several different methods complementing each other, instead of relying on one single method, like chemical weed control. Weed control methods that can be used as parts of IWM strategy include mechanical weed control, application of herbicides, low tillage, changes in the rate and application time of fertilizers, use of undersown crops and crop rotation. Weed surveys were carried out in 2013 and 2014 in the southeastern part of Latvia. The aim of this study was to assess the effect of crop rotation and other field management practices on weed density and weed species composition using the data collected in the surveys. Survey was carried out in the arable fields of conventional farms within four different size categories. One of the significant factors that explained the variation of weed composition within a field was a proportion of cereals in crop rotation within a four year period. Further surveys are required to estimate the effects of climatic variables. Density-dependence can also be important for practical management decisions for particular weed species and should be investigated.</span></p>


2014 ◽  
Vol 14 (2) ◽  
pp. 33-42 ◽  
Author(s):  
KP Bhurer ◽  
DN Yadav ◽  
JK Ladha ◽  
RB Thapa ◽  
KR Pandey

Field experiment under dry direct seeded rice(Oryza sativa L.) was conducted during rainy season of 2010 and 2011 at Regional Agriculture Research Station (RARS), Parwanipur, Bara to develop appropriate weed management practices for dry direct- seeded rice. The trial was laid-out in randomized complete block design (RCBD) and replicated thrice. Observations were taken on weed, plant growth and yield attributing, yield, and socio-economic parameters. The weed density, dry weed weight and weed control efficiency resulted significantly different as influenced by integrated weed management practices. Low weed population density, low weed index and highest weed control efficiency resulted by pendimethalin followed by 2, 4- D followed by one hand weeding were at par with weed free check. Highest yield resulted from weed free plot followed by pendimethalin followed by two hand weeding and pendimethalin followed by 2, 4- D followed by one hand weeding. However, the net return per unit investment resulted highest in pendimethalin followed by 2, 4- D followed by one hand weeding. This proved that amid increasing wage rate and labour scarcity integrated weed management through pendimethalin 30 EC (Stomp) @1 kg a. i. /ha as pre- emergence herbicide application followed by 2, 4- D sodium salt 80 WP @ 0.5 kg a. i. /ha followed by one hand weeding or stale seed bed followed by pendimethalin 30 EC (Stomp) @1 kg a. i. /ha followed by bispyribac (Nominee gold) @25 g a. i. /ha 10% @200 ml/ha at 20 days of seeding resulted best alternative for manual hand weeding practices giving higher net return per unit investment. DOI: http://dx.doi.org/10.3126/njst.v14i2.10413   Nepal Journal of Science and Technology Vol. 14, No. 2 (2013) 33-42


Sign in / Sign up

Export Citation Format

Share Document