scholarly journals Moisture Sorption Isotherms And Thermodynamic Properties Of Urtica Dioica Leaves

2016 ◽  
Vol 12 (24) ◽  
pp. 376 ◽  
Author(s):  
Abdelkader Lamharrar ◽  
Ali Idlimam ◽  
Mohammed Kouhila ◽  
Lamya Lahnine ◽  
Hind Mouhanni
Keyword(s):  
Water Activity ◽  
Gravimetric Method ◽  
Sorption Isotherms ◽  
Moisture Sorption ◽  
Storage Conditions ◽  
Urtica Dioica ◽  
Endemic Plant ◽  
Clapeyron Equation ◽  
Moisture Sorption Isotherms ◽  
Different Temperatures

Urtica dioica is a Moroccon endemic plant of used for its virtues in traditional medicine. Thus, it is necessary to study the effect of preservation processes on the storage conditions of the plant. The static gravimetric method was used to determine sorption isotherms of Urtica dioica leaves at three temperatures (40, 50 and 60 °C) and in the range of water activity ( w a ) ranging from 0.0572 to 0.898. Six mathematical models were used to fit the experimental data. The Enderby and Peleg models were found to be the most suitable for describing the sorption curves. The optimal water activity for conservation of Urtica dioica leaves was determined. Isosteric heats of desorption and adsorption were calculated by applying the Clausius- Clapeyron equation to the sorption isotherms at different temperatures; it decreased with increasing moisture content. A linear relation exists between the enthalpy and entropy of the sorption reaction.

Moisture Sorption Isotherms and Isosteric Heats of Sorption of High-Pressure Treated Paulownia Wood under Different Storage Conditions

2019 ◽  
Vol 62 (1) ◽  
pp. 105-114
Author(s):  
Xiuping Jiang ◽  
Xiuping Jiang ◽  
Huanhuan Li ◽  
Hosahalli S. Ramaswamy ◽  
Songming Zhu ◽  
...  
Keyword(s):  
High Pressure ◽  
Gravimetric Method ◽  
Sorption Isotherms ◽  
Moisture Sorption ◽  
Storage Conditions ◽  
Sorption Behavior ◽  
Adsorption And Desorption ◽  
Moisture Sorption Isotherm ◽  
Moisture Sorption Isotherms ◽  
Paulownia Wood

Abstract. Understanding of moisture sorption isotherms (MSI) is critical for predicting the stability of wood during handling, transport, and storage. The aim of this study was to evaluate the adsorption and desorption isotherm characteristics of high-pressure (HP) treated paulownia wood and to identify the best-fitting model to describe its sorption behavior. The equilibrium moisture contents (EMCs) of HP-treated paulownia wood were obtained using a static gravimetric method under different storage conditions: three temperatures (20°C, 30°C, and 40°C) and five water activity (aw) levels (0.32 to 0.95). Results showed that HP parameters did not significantly affect the MSI trend of treated groups. Eight modified models (modified Chung-Pfost, modified Henderson, modified Oswin, modified Halsey, Chen-Clayton, Guggenheim-Anderson-de Boer (GAB), simply modified GAB, and Peleg) were fitted to the experimental data. The Chen-Clayton model (temperature-dependent) produced randomized residuals and the best prediction performance for both adsorption and desorption among all models. Net isosteric heat of adsorption and desorption decreased from 7.55 to 4.84 kJ mol-1 and from 18.1 to 12.2 kJ mol-1, respectively, with an increase in EMC from 7.5% to 10%. The isosteric temperature (Tß) was 352 K for adsorption and 335 K for desorption, between which all the adsorption and desorption reactions proceeded at the same rate. All thermodynamic functions were adequately characterized by a power law model. Keywords: Equilibrium moisture content, High-pressure treatment, Modeling, Moisture sorption isotherm, Paulownia wood, Temperature, Thermodynamic analysis.

scholarly journals New approach to the calculation of pistachio powder hysteresis

2016 ◽  
Vol 30 (2) ◽  
pp. 245-251 ◽  
Author(s):  
Hamid Tavakolipour ◽  
Mohsen Mokhtarian
Keyword(s):  
Goodness Of Fit ◽  
Capillary Condensation ◽  
Gravimetric Method ◽  
Sorption Isotherms ◽  
Moisture Sorption ◽  
Suitable Model ◽  
Moisture Sorption Isotherms ◽  
Different Temperatures ◽  
Definite Integration ◽  
Increasing Temperature

Abstract Moisture sorption isotherms for pistachio powder were determined by gravimetric method at temperatures of 15, 25, 35 and 40°C. A selected mathematical models were tested to determine the best suitable model to predict isotherm curve. The results show that Caurie model had the most satisfactory goodness of fit. Also, another purpose of this research was to introduce a new methodology to determine the amount of hysteresis at different temperatures by using best predictive model of isotherm curve based on definite integration method. The results demonstrated that maximum hysteresis is related to the multi-layer water (in the range of water activity 0.2-0.6) which corresponds to the capillary condensation region and this phenomenon decreases with increasing temperature.

Thermodynamic properties of water sorption isotherms of grape seed

2014 ◽  
Vol 28 (1) ◽  
pp. 63-71 ◽  
Author(s):  
Kamran Maleki Majd ◽  
Seyed H. Karparvarfard ◽  
Asgar Farahnaky ◽  
Sara Ansari
Keyword(s):  
Experimental Data ◽  
Water Activity ◽  
Gravimetric Method ◽  
Sorption Isotherms ◽  
Moisture Sorption ◽  
Isosteric Heat ◽  
Grape Seed ◽  
Clapeyron Equation ◽  
Moisture Sorption Isotherm ◽  
Best Fit

Abstract In this study the moisture sorption isotherm of grape seed was determined by using a static gravimetric method at 35-65°C and 0.108-0.821 water activity range. The sorption isotherms were found to be typical sigmoid shape of most food materials. Five models including the Brunauer-Emmett-Teller (2-parameter), Guggenheim, Anderson and De Boer (3-parameter), Oswin (2-parameter), Ferro-Fontan (3-parameter) and Peleg (4-parameter) models were considered to fit the experimental data. The Ferro- Fontan and Peleg equations (at three temperatures 35, 45, 65°C) having R2 greater than 0.97 and lower values of standard error of estimate and deviation modulus gave the best fit of the experimental data throughout the entire range of water activity. The net isosteric heat of sorption, calculated by Calusius-Clapeyron equation on experimental data, was found to be a polynomial and exponential function of equilibrium moisture content within the temperature range investigated.

Experimental Study and Modelling of Moisture Sorption Isotherms of Salted Largehead Hairtail (Trichiurus lepturus) at 25 and 35°C

2014 ◽  
Vol 1033-1034 ◽  
pp. 681-689
Author(s):  
Zhong Yang Ren ◽  
Yan Yan Wu ◽  
Zhen Hua Duan ◽  
Lai Hao Li ◽  
Xian Qing Yang
Keyword(s):  
Experimental Data ◽  
Moisture Content ◽  
Equilibrium Moisture Content ◽  
Water Activity ◽  
Gravimetric Method ◽  
Sorption Isotherms ◽  
Moisture Sorption ◽  
The Body ◽  
Trichiurus Lepturus ◽  
Moisture Sorption Isotherms

The moisture sorption characteristics of salted largehead hairtail (Trichiurus lepturus) were investigated within the limits of water activity (0.11-0.98) at 25 and 35°C using a self-made instrument for the measurement of the equilibrium moisture content according to the static gravimetric method. The shape of the sorption isotherms was sigmoidal. The moisture sorption isotherms exhibited significant hysteresis. The hysteresis of salted fish may be due to the salt permeating into the body of the fish as a result of desorption and adsorption processes. Seventeen mathematical models were fit to the experimental data for the equilibrium moisture content at different water activity levels. The Ferro-Fontan equation provided the best fit for the experimental data of the equilibrium moisture content among the 17 models assessed for the sorption isotherms at 25 and 35°C. The net isosteric heats of sorption decreased gradually with increases in moisture content. The isosteric heats of sorption ranged from 44.59 kJ/mol to 45.61 kJ/mol between the moisture contents of 22.22% and 43.25% for salted largehead hairtail.

scholarly journals Moisture sorption isotherms of castor beans. Part 1: Mathematical modeling and hysteresis

2016 ◽  
Vol 20 (8) ◽  
pp. 751-756 ◽  
Author(s):  
André L. D. Goneli ◽  
Paulo C. Corrêa ◽  
Gabriel H. H. de Oliveira ◽  
Osvaldo Resende ◽  
Munir Mauad
Keyword(s):  
Moisture Content ◽  
Sorption Isotherms ◽  
Moisture Sorption ◽  
Environmental Condition ◽  
Adsorption And Desorption ◽  
Moisture Sorption Isotherms ◽  
Different Temperatures ◽  
The Difference ◽  
The Stability ◽  
And Storage

ABSTRACT Sorption isotherms are of great importance in post-harvest procedures, especially for predicting drying and storage, which help to establish the final moisture content of the product under certain environmental condition. Hysteresis is a phenomenon that occurs due to the difference between adsorption and desorption curves, which aids the evaluation of chemical and microbiological deteriorations, indicating the stability of stored products. Moisture sorption isotherms of castor beans were determined and hysteresis was analyzed. Static gravimetric technique at different temperatures (25, 35, 45 and 55 ± 1 °C) was used. Saturated salt solutions in the range of 37-87% ± 2% were utilized to create the required controlled relative humidity environment. Equilibrium moisture content data were correlated by different mathematical models and the Modified Halsey model presented good adjustment for the data, according to statistical procedures. Hysteresis between adsorption and desorption isotherms is present over the range of 0.2-0.9 of water activity, regardless of the temperature. This phenomenon decreases with temperature increase.

scholarly journals Moisture Sorption Behaviour and Mould Ecology of Trade Garri Sold in South Eastern Nigeria

2014 ◽  
Vol 2014 ◽  
pp. 1-10 ◽  
Author(s):  
Tochukwu Samuel ◽  
J. Obeta Ugwuanyi
Keyword(s):  
Moisture Content ◽  
Water Activity ◽  
Central Africa ◽  
Sorption Isotherms ◽  
Moisture Sorption ◽  
Fungal Species ◽  
Temperature Dependent ◽  
Sorption Behaviour ◽  
Moisture Sorption Isotherms ◽  
West And Central Africa

Garri is a creamy white or yellow starchy grit produced by roasting to gelatinization and dryness of peeled, washed, mashed, and fermented dewatered cassava roots. It is the most important product of cassava in West and Central Africa. Mean moisture content of yellow and white garri was 11.11% and 10.81% within 24 hrs of sampling from the market, increasing to 17.27% and 16.14%, respectively, following 3 months of storage at room temperature. The water activity of samples varied from initial 0.587 to 0.934 following storage. Moisture sorption isotherms, determined by static gravimetric techniques at 20° and 30°C, showed temperature dependent BET Sigmoidal type II behaviour typical of carbohydrate rich foods but modulated very slightly by the content of palm oil. Equilibrium moisture content decreased with increase in temperature at constant water activity. A total of 10 fungal species belonging to the generaMucor,Penicillium,Cephalosporium,Aspergillus,Scopulariopsis,Rhizopus, and Paecilomyceswere identified, with range increasing with water activity of samples.

Equilibrium Moisture Content Models for Lafun

2008 ◽  
Vol 4 (2) ◽  
Author(s):  
Olusegun J Oyelade
Keyword(s):  
Moisture Content ◽  
Equilibrium Moisture Content ◽  
Adsorption Isotherms ◽  
Gravimetric Method ◽  
Sorption Isotherms ◽  
Moisture Sorption ◽  
Keeping Quality ◽  
Moisture Sorption Isotherms ◽  
Process Operation ◽  
The Relationship

Insights into the relationship between the air relative humidity (water activity (aw)) and equilibrium moisture content of food materials is essential to maintain good keeping quality and optimize process operation. The adsorption isotherms for cassava flour (lafun) were investigated with the static gravimetric method. Concentrated acid (H2SO4) solutions were used to vary the micro-climate in the study and presented in an easy-to-use template-like format over the range of temperature (27- 40oC) and aw (0.10-0.80) usually experienced in the tropical environment. The experimental data were compared with five widely recommended models in the literature for food sorption isotherms (GAB, modified GAB, modified Oswin, modified Henderson & modified Chung-Pfost). The moisture sorption isotherms were sigmoidal in shape and were influenced by temperature. The modified Oswin model was found to be most adequate whilst the modified GAB appears not suitable to model the adsorption isotherms for lafun.

scholarly journals Moisture Sorption Isotherms of Yogurt Powder Containing Candied Chestnut Puree

2016 ◽  
Vol 4 (8) ◽  
pp. 676 ◽  
Author(s):  
Aslı Zungur Bastıoğlu ◽  
Safiye Nur Dirim ◽  
Figen Kaymak Ertekin
Keyword(s):  
Freeze Drying ◽  
Gravimetric Method ◽  
Sorption Isotherms ◽  
Moisture Sorption ◽  
Sorption Data ◽  
Freeze Dried ◽  
Adsorption Data ◽  
Moisture Sorption Isotherms ◽  
Powder Samples ◽  
Gab Model

Yogurt powder was produced by freeze drying and with added candied chestnut puree at ratios of 5, 10, and 20 % by weight. Moisture sorption isotherms of yogurt powder samples, plain (YP), and containing 5, 10, 20% candied chestnut puree (CCP) were determined at 25°C using the standard, static-gravimetric method. The experimental adsorption data of yogurt powders at 25°C were fitted to 14 sorption equations which are most widely used to fit experimental sorption data of various food materials. The parameters of the sorption models were estimated from the experimental results by using the nonlinear regression analysis. The GAB model gave the closet fit to the sorption data of freeze dried yogurt powders with candied chestnut puree at 25°C. BET, Ferro Fanton, Henderson, Halsey, Oswin and Modified Oswin models are also acceptable for describing the adsorption isotherms for freeze dried yogurt with candied chestnut puree at 25°C.

scholarly journals Study on the Effects of Physical Properties of Tenera Palm Kernel during Drying and Its Moisture Sorption Isotherms

Processes ◽  
2020 ◽  
Vol 8 (12) ◽  
pp. 1658
Author(s):  
Mina Habibiasr ◽  
Mohd Noriznan Mokhtar ◽  
Mohd Nordin Ibrahim ◽  
Khairul Faezah Md Yunos ◽  
Nuzul Amri Ibrahim
Keyword(s):  
Moisture Content ◽  
Physical Properties ◽  
Surface Area ◽  
Palm Kernel ◽  
Gravimetric Method ◽  
Sorption Isotherms ◽  
Moisture Sorption ◽  
Kernel Length ◽  
Moisture Sorption Isotherms ◽  
Ground Kernel

A study on the effect of the physical properties and moisture sorption isotherm of palm kernels constitutes the critical criteria in evaluating the drying performance. The drying was evaluated as a function of moisture content (MC) in the range of 0.31–0.02 kg/kg (d.b.). Whereas, the equilibrium moisture content (EMC) of palm kernels (whole kernel and ground kernel) was determined experimentally using the standard gravimetric method at different temperatures (50 °C to 80 °C), over a range of relative humidity (RH) from 10% to 81%. Palm kernel length, width, and thickness decrease from 16.08 ± 2.09 mm to 14.17 ± 2.30 mm, 12.06 ± 1.40 mm to 11.24 ± 1.08 mm, and 10.01 ± 1.27 mm to 9.18 ± 1.04 mm, respectively, when MC decreased. Bulk density, surface area, and specific surface area decreased as the MC decreased, while porosity and true density were increased. EMC of palm kernels (whole kernel and ground kernel) decreased with an increase in temperature at constant RH. Modified Oswin and modified Halsey models were found to be the best for predicting desorption moisture isotherms for whole and ground palm kernel, respectively. Therefore, the study of the effect of drying on physical aspects as well as moisture sorption isotherms is important to further analyze the drying performance of Tenera palm kernel (e.g., equipment design and energy requirement).

Sign in / Sign up

Export Citation Format

Share Document