scholarly journals Application of Magneto-optical Characteristic in Liquid: Verdet Constant as Quality Indicator of Repeatedly Cooking Oil

2021 ◽  
Vol 9 (1) ◽  
pp. 45
Author(s):  
Silfiana Puspita Sari ◽  
Misto Misto ◽  
Endhah Purwandari
Keyword(s):  
Magnetic Field ◽  
Optical Properties ◽  
Faraday Effect ◽  
Optical Characteristic ◽  
Verdet Constant ◽  
Cooking Oil ◽  
Polarization Axis ◽  
Repeated Use ◽  
Magnetic Field Treatment ◽  
The Difference

The Faraday Effect is a magnetooptical phenomenon in physics describing the interaction of light and magnetic fields in a medium. A parameter that indicates the interaction is the Verdet constant. In this research, Verdet constant was measured on cooking oil that has been used several times. Magneto-optical properties were measured using the polarimetry method, which uses a He-Ne Laser beam with a magnetic field treatment of 50 gauss, 80 gauss and 100 gauss. The samples analyzed were bulk and non-bulk cooking oil. Repeated use of cooking oil causes a change in the polarization axis of the polarized laser. This has an impact on the Verdet constant of the material. The difference in the Verdet constant shows that the Verdet constant can be used as an indicator of cooking oil that has been used up to three times.

scholarly journals Effect of Weak Magnetic Field Treatment on Optical Properties of Epitaxial GaN Films

2015 ◽  
Vol 6 (1) ◽  
pp. 1-5 ◽  
Author(s):  
R.A. Red´ko ◽  
R.V. Konakova ◽  
V.V. Milenin ◽  
S.M. Red’ko ◽  
V.V. Shvalagin ◽  
...  
Keyword(s):  
Magnetic Field ◽  
Optical Properties ◽  
Weak Magnetic Field ◽  
Magnetic Field Treatment

MAGNETIC FIELD, PRESSURE AND TEMPERATURE DEPENDENT OPTICAL PROPERTIES IN A GaAs 9.0 P 1.0 QUANTUM DOT

2014 ◽  
Vol 6 (2) ◽  
pp. 1178-1190
Author(s):  
A. JOHN PETER ◽  
Ada Vinolin
Keyword(s):  
Magnetic Field ◽  
Optical Properties ◽  
Quantum Dot ◽  
Field Strength ◽  
Magnetic Field Strength ◽  
Photon Energy ◽  
Nonlinear Optical ◽  
Binding Energies ◽  
Nonlinear Optical Properties ◽  
Optical Rectification

Simultaneous effects of magnetic field, pressure and temperature on the exciton binding energies are found in a 9.0 1.0 6.0 4.0 GaAs P / GaAs P quantum dot. Numerical calculations are carried out taking into consideration of spatial confinement effect. The cylindrical system is taken in the present problem with the strain effects. The electronic properties and the optical properties are found with the combined effects of magnetic field strength, hydrostatic pressure and temperature values. The exciton binding energies and the nonlinear optical properties are carried out taking into consideration of geometrical confinement and the external perturbations.Compact density approach is employed to obtain the nonlinear optical properties. The optical rectification coefficient is obtained with the photon energy in the presence of pressure, temperature and external magnetic field strength. Pressure and temperature dependence on nonlinear optical susceptibilities of generation of second and third order harmonics as a function of incident photon energy are brought out in the influence of magnetic field strength. The result shows that the electronic and nonlinear optical properties are significantly modified by the applications of external perturbations in a 9.0 1.0 6.0 4.0 GaAs P / GaAs P quantum dot.

scholarly journals Investigations on the Optical Properties of InGaN/GaN Multiple Quantum Wells with Varying GaN Cap Layer Thickness

2020 ◽  
Vol 15 (1) ◽  
Author(s):  
Xiaowei Wang ◽  
Feng Liang ◽  
Degang Zhao ◽  
Zongshun Liu ◽  
Jianjun Zhu ◽  
...  
Keyword(s):  
Optical Properties ◽  
Quantum Wells ◽  
Layer Thickness ◽  
Stark Effect ◽  
Chemical Vapor ◽  
Multiple Quantum ◽  
Three Samples ◽  
Measurement Results ◽  
Cap Layer ◽  
The Difference

Abstract Three InGaN/GaN MQWs samples with varying GaN cap layer thickness were grown by metalorganic chemical vapor deposition (MOCVD) to investigate the optical properties. We found that a thicker cap layer is more effective in preventing the evaporation of the In composition in the InGaN quantum well layer. Furthermore, the quantum-confined Stark effect (QCSE) is enhanced with increasing the thickness of GaN cap layer. In addition, compared with the electroluminescence measurement results, we focus on the difference of localization states and defects in three samples induced by various cap thickness to explain the anomalies in room temperature photoluminescence measurements. We found that too thin GaN cap layer will exacerbates the inhomogeneity of localization states in InGaN QW layer, and too thick GaN cap layer will generate more defects in GaN cap layer.

Effect of Magnetic Fields on the Resistance and Microstructure of Al-Cu Alloy during Solidification Processing

2011 ◽  
Vol 287-290 ◽  
pp. 2916-2920
Author(s):  
Chun Yan Ban ◽  
Peng Qian ◽  
Xu Zhang ◽  
Qi Xian Ba ◽  
Jian Zhong Cui
Keyword(s):  
Magnetic Field ◽  
Magnetic Fields ◽  
Turning Points ◽  
Probe Method ◽  
Solidification Processing ◽  
Ac Magnetic Field ◽  
Dc Magnetic Field ◽  
Cu Alloy ◽  
The Difference ◽  
Good Agreement

The resistance of Al-21%Cu alloy under no magnetic field, DC magnetic field and AC magnetic field from liquid to solid was measured by a four-probe method. The difference of resistance versus temperature curves (R-T curves) was analyzed. It is found that the R-T curves of Al-21%Cu alloy are monotone decreasing and have two obvious turning points. Under DC magnetic field, the liquidus and solidus temperatures of the alloy both decrease, while under AC magnetic field, the liquidus and solidus temperatures both increase. There is a good agreement between the microstructure of quenching sample and R-T curves. The mechanism of the effect of magnetic fields was discussed.

Improvement of the wear resistance of nickel-aluminium bronze and 2014-T6 aluminium alloy by application of alternating magnetic field treatment

Wear ◽  
2021 ◽  
pp. 203940
Author(s):  
Sufyan Akram ◽  
Anatolii Babutskyi ◽  
Andreas Chrysanthou ◽  
Diogo Montalvão ◽  
Mark J. Whiting ◽  
...  
Keyword(s):  
Magnetic Field ◽  
Wear Resistance ◽  
Aluminium Alloy ◽  
Alternating Magnetic Field ◽  
Aluminium Bronze ◽  
Magnetic Field Treatment

scholarly journals First in-orbit results of the vector magnetic field measurement of the High Precision Magnetometer onboard the China Seismo-Electromagnetic Satellite

2019 ◽  
Vol 71 (1) ◽  
Author(s):  
Bin Zhou ◽  
Bingjun Cheng ◽  
Xiaochen Gou ◽  
Lei Li ◽  
Yiteng Zhang ◽  
...  
Keyword(s):  
Magnetic Field ◽  
High Precision ◽  
Magnetic Field Measurement ◽  
Vector Data ◽  
Magnetic Field Data ◽  
Night Side ◽  
The Difference ◽  
The Magnetic Field ◽  
Ground Calibration ◽  
Data Calibration

Abstract The High Precision Magnetometer (HPM) is one of the main payloads onboard the China Seismo-Electromagnetic Satellite (CSES). The HPM consists of two Fluxgate Magnetometers (FGM) and the Coupled Dark State Magnetometer (CDSM), and measures the magnetic field from DC to 15 Hz. The FGMs measure the vector components of the magnetic field; while the CDSM detects the magnitude of the magnetic field with higher accuracy, which can be used to calibrate the linear parameters of the FGM. In this paper, brief descriptions of measurement principles and performances of the HPM, ground, and in-orbit calibration results of the FGMs are presented, including the thermal drift and magnetic interferences from the satellite. The HPM in-orbit vector data calibration includes two steps: sensor non-linearity corrections based on on-ground calibration and fluxgate linear parameter calibration based on the CDSM measurements. The calibration results show a reasonably good stability of the linear parameters over time. The difference between the field magnitude calculated from the calibrated FGM components and the magnitude directly measured by the CDSM is just 0.5 nT (1σ) when the linear parameters are fitted separately for the day- and the night-side. Satellite disturbances have been analyzed including soft and hard remanence as well as magnetization of the magnetic torquer, radiation from the Tri-Band Beacon, and interferences from the rotation of the solar wing. A comparison shows consistency between the HPM and SWARM magnetic field data. Observation examples are introduced in the paper, which show that HPM data can be used to survey the global geomagnetic field and monitor the magnetic field disturbances in the ionosphere.

Influence of doping on crystal growth, structure and optical properties of nanocrystalline CaTiO3: a case study using small-angle neutron scattering

2015 ◽  
Vol 48 (3) ◽  
pp. 836-843 ◽  
Author(s):  
Oindrila Mondal ◽  
Manisha Pal ◽  
Ripandeep Singh ◽  
Debasis Sen ◽  
Subhasish Mazumder ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Optical Properties ◽  
Crystal Growth ◽  
Small Angle Neutron Scattering ◽  
Ionic Radius ◽  
Ionic Radii ◽  
Growth Structure ◽  
Transmission Electron ◽  
The Difference

The effect of dopant size (ionic radius) on the crystal growth, structure and optical properties of nanocrystalline calcium titanate, CaTiO3(CTO), have been studied using small-angle neutron scattering. X-ray diffraction, along with high-resolution transmission electron microscopy, confirms the growth of pure nanocrystalline CTO. Rietveld analysis reveals that the difference of ionic radii between dopant and host ions induces strain within the lattice, which significantly affects the lattice parameters. The induced strain, due to the difference of ionic radii, causes the shrinkage of the optical band gap, which is manifested by the redshift of the absorbance band. Mesoscopic structural analysis using scattering techniques demonstrates that the ionic radius of the dopant influences the agglomeration behaviour and particle size. A high-resolution transmission electron microscopy study reconfirms the formation of pure highly crystalline CTO nanoparticles.

Magnetocrystalline Anisotropy and Twinning Stress of 10M and 2M Martensites in Ni-Mn-Ga System

2006 ◽  
Vol 512 ◽  
pp. 195-200 ◽  
Author(s):  
Nariaki Okamoto ◽  
Takashi Fukuda ◽  
Tomoyuki Kakeshita ◽  
Tetsuya Takeuchi
Keyword(s):  
Magnetic Field ◽  
Shear Stress ◽  
Magnetocrystalline Anisotropy ◽  
Anisotropy Constant ◽  
The Other ◽  
Magnetic Shear ◽  
Maximum Value ◽  
Twinning Plane ◽  
Twinning Shear ◽  
The Difference

Ni2MnGa alloy with 10M martensite exhibits rearrangement of martensite variants (RMV) by magnetic field, but Ni2.14Mn0.92Ga0.94 with 2M martensite does not. In order to explain the difference, we measured uniaxial magnetocrystalline anisotropy constant Ku and the stress required for twinning plane movement τreq in these alloys. Concerning the former alloy, the maximum value of magnetic shear stress acting across twinning plane τmag, which is evaluated as |Ku| divided by twinning shear, becomes larger than τr eq. On the other hand, concerning the latter alloy, the maximum of τmag is only one-tenth of τreq at any temperature examined. Obviously, the relation, τmag> τr eq, is satisfied when RMV occurs by magnetic field and vice versa. In this martensite, the large twinning shear of 2M martensite is responsible for small τmag and large τreq.

Sign in / Sign up

Export Citation Format

Share Document