scholarly journals PENGEMBANGAN METODE PENETAPAN KADAR AIR BENIH SAGA POHON (Adenanthera pavoninaL) DENGAN METODE OVEN SUHU RENDAH DAN TINGGI

Agrin ◽  
2017 ◽  
Vol 21 (1) ◽  
Author(s):  
Heny Agustin ◽  
Yudha Prananda

Pengujian kadar air benih secara umum telah diatur oleh International Seed Testing Association untukberbagai keperluan, namun beberapa komoditi belum diatur secara jelas termasuk benih saga pohon. Oleh karenaitu pengembangan uji kadar air pada benih saga pohon dirasa perlu untuk dilakukan. Penelitian ini bertujuan untukmengembangkan uji kadar air benih saga pohon dengan dua metode oven yaitu suhu rendah dan tinggi. Penelitiandilaksanan di Lab. Agroekoteknologi, Universitas Trilogi sejak September-Desember 2016. Penelitian terdiri atasdua percobaan yaitu dengan metode oven suhu rendah (103±2)oC dan suhu tinggi (133±2)oC yang keduanyamenggunakan Rancangan Acak Kelompok dua faktor yaitu perlakuan benih saat di oven dan lamanya pengovenan.Untuk metode oven suhu rendah, faktor perlakuan benih saat di oven terdiri atas tiga taraf yaitu benih utuh, benihdibelah dua, benih dihaluskan dan lamanya pengovenan terdiri atas empat taraf yaitu 17 jam, 19 jam, 21 jam, dan23 jam. Untuk metode oven suhu tinggi, faktor perlakuan benih saat dioven terdiri atas tiga taraf yaitu benih utuh,benih dibelah dua, benih dihaluskan dan faktor lamanya pengovenan terdiri atas lima taraf yaitu 1 jam, 2 jam, 3jam, 4 jam, dan 5 jam. Hasil percobaan menunjukkan bahwa kadar air benih saga pohon dapat dilakukan denganmetode oven suhu rendah selama 17 jam dengan perlakuan benih dibelah dua atau selama 19-23 jam denganperlakuan benih utuh. Pengujian kadar air dengan metode suhu tinggi untuk perlakuan lamanya pengovenan dapatdilakukan selama 1 jam dan untuk perlakuan benih saat di oven dapat dilakukan dalam keadaan benih utuh.Kata kunci: benih utuh, benih dibelah dua, benih dihaluskan, lamanya pengovenan.ABSTRACTInternational Seed Testing Association generally rules the testing method of seed moisture content forvarious purposes. However, some commodities have not been clearly regulated including saga seeds. Therefore,the development of seed moisture content testing for saga seeds is considered necessary. The objective of the studywas to develop seed moisture content testing using two oven methods, namely low and high constant temperature.It was conducted at Integrated Lab. of Agroecotechnology, Department of Agroecotecnology, Trilogi Universitystarting from September to December 2016. Two experiments which were low constant temperature oven method(103±2) oC and high constant temperature oven method (133±2) oC were tested using two factors randomizedgroup design. The factors were seed treatment in the oven and period of seed drying. Low constant temperaturemethod used 3 levels of seed treatment (whole seed, half seed, and ground seed, respectively) and 4 levels of dryingperiod (17, 19, 21, and 23 hours, respectively). While high constant temperature method used 3 levels of seedtreatment (whole seed, half seed, and ground seed, respectively) and 5 levels of drying period (1, 2, 3, 4, and 5hours, respectively). The results showed that saga moisture content could be determined using low temperaturemethod with 17-hour drying period for half seeds or 19-23 hours of drying period for whole seeds. As for hightemperature method, seed moisture content testing could be done when seeds were dried for 1 hour, while for seedtreatment in the oven conducted for whole seeds.Key words: whole seed, half seed, ground seed, period of seed drying.

2018 ◽  
Vol 5 (2) ◽  
pp. 91-96 ◽  
Author(s):  
Marcos Altomani Neves Dias ◽  
André Kitaro Mocelin Urano ◽  
Deborah Bueno Da Silva ◽  
Silvio Moure Cicero

Seed treatment (ST) is an important practice for soybean crop. This research had the objective to evaluate the influence of seed moisture content in the response to different spray volumes (SV) used for seed treatment in soybean, considering effects on seed physiological quality. Three seed lots with distinct moistures were used: 7.2%, 10.1% and 13.0%. Untreated seeds (control) and three SV were tested: 8, 13 and 18 mL kg-1. All lots received the same treatment combination, containing insecticide, fungicide, fertilizer and biostimulant. This combination represented 8 mL kg-1 of SV; the doses of 13 and 18 mL kg-1 were obtained by adding 5 and 10 mL kg-1 of water, respectively. Evaluations of seed physiological quality consisted of electrical conductivity, seed respiration, germination and vigor tests. Results of all tests demonstrates that low-moisture soybean seeds (7.2%) are negatively affected by seed treatment within an SV range of 8 to 18 mL kg-1, while untreated seeds with equal moisture are not affected. Oppositely, high-moisture seeds (13.0%) are not affected by the SV tested, while intermediate-moisture seeds (10.1%) are affected by the higher SV. This result highlights seed moisture as a key parameter to be managed before soybean ST, aiming to maintain a high physiological quality.


1978 ◽  
Vol 58 (2) ◽  
pp. 557-560
Author(s):  
R. M. DE PAUW

The after-ripening requirement of three fall rye (Secale cereale L.) cultivars, harvested at three seed moisture contents (50, 42, and 32%), was assessed by monitoring the changes in seedling emergence from sowings made over a period of 60 days. All cultivars exhibited a short after-ripening requirement of 1–7 days. The absolute duration of the after-ripening requirement was not affected by the range of seed moisture contents studied. Seed treatment with captan [N[(trichloromethyl) thiol]-4-cyclohexene-1,2-dicarboximide] significantly increased percent seedling emergence. The captan treatment had the greatest effect on seeds harvested at the lowest moisture content.


Author(s):  
Offurum Julius Chigozie ◽  
C.M. Morgan

The water content determination of two maize species (Yellow corn- and White corn- ) located at Ohaji in Imo State of Nigeria were  considered in this study. This was motivated by the regular reported cases of the seed post-harvest spoilages, especially in the local communities. And the moisture content of a particular seed could vary according to the various location of crop, presumably due to the soil texture. The moisture content of a given crop seed can influence its storage value, as well as its choice of selection during manufacturing processes. It was, thus, necessary to determine the moisture content of the two maize species (white and yellow corn) from Ohaji in Imo State of Nigeria, in order to identify their dispositions, especially during storage. Modified High Constant Temperature Oven method, as prescribed by the International Seed Testing Association (which involves preliminary pre-drying and grinding), was employed, at a temperature of 102oC. This involved the use of dry-weight technique, which is expressed as a percentage of the dry weight of the seeds. The procedure for each sampling was replicated accordingly, and the mean value identified as the actual result. The moisture content for Sample A (white corn) was found to be 31.7%, while that of Sample B (yellow corn) was found to be 21.5%, which shows that the yellow corn would always have longer storage value than the white corn. As any change in the seed moisture content has a way of affecting its storage life, it is advisable not to store the white corn longer than it could be applied in the yellow corn for a better storage value.Keywords: Determination, Moisture Content, White Corn, Yellow Corn, Dry-weight Basis


2001 ◽  
Vol 1 (2) ◽  
pp. 119 ◽  
Author(s):  
S.O. Nelson ◽  
S. Trabelsi ◽  
A.W. Kraszewski

2007 ◽  
Vol 47 (6) ◽  
pp. 683 ◽  
Author(s):  
Pippa J. Michael ◽  
Kathryn J. Steadman ◽  
Julie A. Plummer

Seed development was examined in Malva parviflora. The first flower opened 51 days after germination; flowers were tagged on the day that they opened and monitored for 33 days. Seeds were collected at 12 stages during this period and used to determine moisture content, germination of fresh seeds and desiccation tolerance (seeds dried to 10% moisture content followed by germination testing). Seed moisture content decreased as seeds developed, whereas fresh (max. 296 mg) and dry weight (max. 212 mg) increased to peak at 12–15 and ~21 days after flowering (DAF), respectively. Therefore, physiological maturity occurred at 21 DAF, when seed moisture content was 16–21%. Seeds were capable of germinating early in development, reaching a maximum of 63% at 9 DAF, but germination declined as development continued, presumably due to the imposition of physiological dormancy. Physical dormancy developed at or after physiological maturity, once seed moisture content declined below 20%. Seeds were able to tolerate desiccation from 18 DAF; desiccation hastened development of physical dormancy and improved germination. These results provide important information regarding M. parviflora seed development, which will ultimately improve weed control techniques aimed at preventing seed set and further additions to the seed bank.


1987 ◽  
Vol 27 (1) ◽  
pp. 179 ◽  
Author(s):  
MA Siddique ◽  
G Somerset ◽  
PB Goodwin

Trials on the cultivars Canyon and Gallatin 50 in 1978 and Cascade in 1979 were run in North Queensland to examine ways of improving seed quality of snap beans. The trials concentrated on the maturation period, since this is a critical period for the development of seed quality. We found that seed quality was poor when the crop was cut at the stage when the leaves had fallen and all the pods were dry, or if the plants were cut at any stage and allowed to dry on the ground in single rows. This poor seed quality was associated with high pod temperatures during seed maturation. Cutting the crop before leaf fall, at a seed moisture content close to 50% (20-40% of pods dry) and windrowing immediately in 5 or 10 rows to 1 windrow gave low pod temperatures during seed maturation and high seed quality. Seed harvested and threshed directly off the crop was of good quality provided the seed moisture content in the crop had fallen to less than 25%.


2020 ◽  
Vol 11 (3) ◽  
pp. 199-205
Author(s):  
Arum Sekar Wulandari ◽  
Afrida Rizka Farzana

The presence of Pericopsis mooniana (Thw.) Thw. in nature is endangered. Meanwhile, Pericopsis mooniana plants have its obstacles in generative propagation because the seeds have mechanical dormancy. Studies carried out to: (1) observe the morphology of pods, seeds and sprouts of Pericopsis mooniana; (2) determine the physical quality of Pericopsis mooniana seeds, and (3) analyze the proper dormancy breaking treatment for Pericopsis mooniana seeds. Research is conducted in laboratories and in greenhouses. The physical quality of the seeds measured was the weight of 1,000 seeds and the moisture content. The treatment for breaking the dormancy of the Pericopsis mooniana seeds were control, scarification of the seeds using nail clippers and soaking in hot to cold water for 48 hours. Morphologically, the fruit of Pericopsis mooniana is pod-shaped, with orange seeds, oval-shaped and curved edges. Pericopsis mooniana sprouts include in the epigeal type. In 1 kg of weight there are ± 4,000 Pericopsis mooniana seeds, with the post harvest seed moisture content amounting to 7.62%. The dormancy breaking treatment of Pericopsis mooniana seeds increased seeds germination by 60% compared to controls. The scarification of Pericopsis mooniana seeds using nail clippers for breaking mechanical dormancy is the best treatment because it can increase the number of seeds germinating in a short time and simultaneously. Key words: breaking seed dormancy, morphology, Pericopsis mooniana, physical quality, seed scarificatio


2011 ◽  
Vol 79 (1) ◽  
pp. 21-25
Author(s):  
Agnieszka I. Piotrowicz-Cieślak ◽  
Maciej Niedzielski ◽  
Dariusz J. Michalczyk ◽  
Wiesław Łuczak ◽  
Barbara Adomas

Germinability and the content of soluble carbohydrates were analysed in cereal seed (winter rye, cv. Warko; spring wheat, cv. Santa; hexaploid winter triticale, cv. Fidelio and cv. Woltario). Seed moisture content (mc) was equilibrated over silica gel to 0.08 g H<sub>2</sub>O/g dry mass and stored in a desiccator at 20<sup>o</sup>C for up to 205 weeks or were equilibrated to mc 0.06, 0.08 or 0.10 g H<sub>2</sub>O/g dm and subjected to artificial aging at 35<sup>o</sup>C in air-tight laminated aluminium foil packages for 205 weeks. It was shown that the rate of seed aging depended on the species and seed moisture content. The fastest decrease of germinability upon storage was observed in seed with the highest moisture level. Complete germinability loss for winter rye, winter triticale cv. Fidelio, winter triticale cv. Woltario and spring wheat seed with mc 0.10 g H<sub>2</sub>O/g dm<sup>3</sup> occurred after 81, 81, 101 and 133 weeks, respectively. Fructose, glucose, galactose, myo-inositol, sucrose, galactinol, raffinose, stachyose and verbascose were the main soluble carbohydrates found in the seed. The obtained data on the contents of specific sugars and the composition of soluble sugars fraction in seed of rye, wheat and triticale did not corroborate any profound effect of reducing sugars, sucrose and oligosaccharides on seed longevity.


2017 ◽  
Vol 50 (4) ◽  
pp. 5-16
Author(s):  
F. Shahbazi

AbstractMechanical damage of seeds due to harvest, handling and other process is an important factor that affects the quality and quaintly of seeds. The objective of this research was to determine the effects of moisture content and the impact energy on the breakage susceptibility of vetch seeds. The experiments were conducted at moisture contents of 7.57 to 25% (wet basis) and at the impact energies of 0.1, 0.2 and 0.3 J, using an impact damage assessment device. The results showed that impact energy, moisture content, and the interaction effects of these two variables significantly influenced the percentage breakage in vetch seeds (p<0.01). Increasing the impact energy from 0.1 to 0.3 J caused a significant increase in the mean values of seeds breakage from 41.69 to 78.67%. It was found that the relation between vetch seeds moisture content and seeds breakage was non-linear, and the extent of damaged seeds decreased significantlyas a polynomial (from 92.47 to 33.56%) with increasing moisture (from 7.57 to 17.5%) and reached a minimum at moisture level of about 17.5%. Further increase in seed moisture, however, caused an increase in the amount of seeds breakage. Mathematical relationships composed of seed moisture content and impact energy, were developed for accurately description the percentage breakage of vetch seeds under impact loading. It was found that the models have provided satisfactory results over the whole set of values for the dependent variable.


Sign in / Sign up

Export Citation Format

Share Document