scholarly journals Reactive Energetic Plasticizers Utilizing Cu-Free Azide-alkyne 1,3-dipolar Cycloaddition for In-Situ Preparation of Poly(THF-co-GAP)-Based Polyurethane Energetic Binders

2018 ◽  
Author(s):  
Mingyang Ma ◽  
Younghwan Kwon
Keyword(s):  
Thermal Stability ◽  
Dipolar Cycloaddition ◽  
Resonance Spectroscopy ◽  
Solid Propellants ◽  
Scanning Calorimetry ◽  
In Situ Preparation ◽  
1H Nuclear Magnetic Resonance ◽  
Energetic Plasticizers ◽  
Thermal Stability Of

Reactive energetic plasticizers (REPs) coupled with hydroxy-telechelic poly(glycidyl azide-co-tetrahydrofuran) (PGT)-based energetic polyurethane (PU) binders for use in solid propellants and plastic-bonded explosives (PBXs) were investigated. The generation of gem-dinitro REPs along with a terminal alkyne stemmed from a series of finely designed approaches to not only satisfy the common demands as conventional energetic plasticizers but prevent the migration of plasticizers. The miscibility and rheological behavior of a binary mixture of PGT/REP with various REP fractions were quantitatively determined by differential scanning calorimetry (DSC) and rheometer, respectively, highlighting the promising performance of REPs in the formulation process. The kinetics on the distinct reactivity of propargyl vs. 3-butynyl species of REPs towards the azide group of the PGT prepolymer in terms of Cu-free azide-alkyne 1,3-dipolar cycloaddition (1,3-DPCA) was studied by monitoring 1H nuclear magnetic resonance spectroscopy and analyzing the activation energies (Ea) obtained using DSC. The thermal stability of the finally cured energetic binders with the incorporation of REPs indicated that the thermal stability of the REP/PGT-based PUs was maintained independently of the REP content. The tensile strength and modulus of the PUs increased with increasing the REP content. In addition, the energetic performance and sensitivity of REP and REP triazole species was predicted.

Preparation and Thermal Stability of Pyrrole and m-Toluidine Copolymer/Montmorillonite Composites

2014 ◽  
Vol 915-916 ◽  
pp. 780-783
Author(s):  
Hong Wang ◽  
Ming Tian Li ◽  
Yue Lu ◽  
Di Liu
Keyword(s):  
Thermal Stability ◽  
Interfacial Interaction ◽  
X Ray Diffraction ◽  
Scanning Calorimetry ◽  
Chemical Polymerization ◽  
X Ray ◽  
Ft Ir ◽  
Clay Layers ◽  
Thermal Stability Of

Pyrrole and m-toluidine copolymer (P(PY/MT)) / montmorillonite (MMT) Composites were prepared by in situ chemical polymerization of pyrrole with m-toluidine monomer in the presence of montmorillonite. The structural, morphological and thermal properties of these composites were characterized by X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), and differential scanning calorimetry (DSC). X-ray diffraction result for P(PY/MT)-MMT illuminated the intercalation of P(PY/MT) copolymer between the clay layers. The FT-IR result showed the successful incorporation of montmorillonite clay in the prepared P(PY/MT)/MMT composite. The higher thermal stability of high MMT content rate might be attributed to its higher chain compactness due to the interfacial interaction between the P(PY/MT) and the clay.

Preparation of Poly(m-toluidine)/Montmorillonite Composites and its Thermal Stability

2014 ◽  
Vol 941-944 ◽  
pp. 334-337
Author(s):  
Hong Wang ◽  
Rui Song Yang ◽  
Ying Wang
Keyword(s):  
Thermal Stability ◽  
Interfacial Interaction ◽  
X Ray Diffraction ◽  
Scanning Calorimetry ◽  
Chemical Polymerization ◽  
X Ray ◽  
Ft Ir ◽  
Clay Layers ◽  
Thermal Stability Of

Poly (m-toluidine)(PMT) / montmorillonite (MMT) Composites with thermal stability were synthesized by in situ chemical polymerization of m-toluidine monomer in the presence of montmorillonite. The PMT /MMT composites were characterized by X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), and differential scanning calorimetry (DSC). The FT-IR result displayed the successful incorporation of montmorillonite clay in the prepared PMT/MMT composite. X-ray diffraction result for PMT/MMT showed the intercalation of PMT between the clay layers. The higher thermal stability of high MMT content rate might be attributed to its higher chain compactness due to the interfacial interaction between the PMT and the .MMT.

Activity and thermal stability of antioxidants by differential scanning calorimetry and electron spin resonance spectroscopy

2007 ◽  
Vol 101 (3) ◽  
pp. 1108-1114 ◽  
Author(s):  
Francesca Giuffrida ◽  
Frédéric Destaillats ◽  
Maria Herrero Egart ◽  
Bernadette Hug ◽  
Pierre-Alain Golay ◽  
...  
Keyword(s):  
Thermal Stability ◽  
Differential Scanning Calorimetry ◽  
Electron Spin Resonance ◽  
Electron Spin ◽  
Electron Spin Resonance Spectroscopy ◽  
Resonance Spectroscopy ◽  
Scanning Calorimetry ◽  
Spin Resonance ◽  
Thermal Stability Of

Thermal Stability of N-Heterocycle-Stabilized Iodanes – A Systematic Investigation

2019 ◽  
Author(s):  
Andreas Boelke ◽  
Yulia A. Vlasenko ◽  
Mekhman S. Yusubov ◽  
Boris Nachtsheim ◽  
Pavel Postnikov
Keyword(s):  
Thermal Stability ◽  
Differential Scanning Calorimetry ◽  
Thermogravimetric Analysis ◽  
Systematic Investigation ◽  
Scanning Calorimetry ◽  
Thermal Stability Of

<p>The thermal stability of pseudocyclic and cyclic <i>N</i>-heterocycle-stabilized (hydroxy)aryl- and mesityl(aryl)-l<sup>3</sup>-iodanes (NHIs) through thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC) is investigated. NHIs bearing <i>N</i>-heterocycles with a high N/C-ratio such as triazoles show among the lowest descomposition temperatures and the highest decomposition energies. A comparison of NHIs with known (pseudo)cyclic benziodoxolones is made and we further correlated their thermal stability with reactivity in a model oxygenation. </p>

scholarly journals Isothermal Vulcanization and Non-Isothermal Degradation Kinetics of XNBR/Epoxy/XNBR-g-Halloysite Nanotubes (HNT) Nanocomposites

Materials ◽  
2021 ◽  
Vol 14 (11) ◽  
pp. 2872
Author(s):  
Seyed Mohamad Reza Paran ◽  
Ghasem Naderi ◽  
Elnaz Movahedifar ◽  
Maryam Jouyandeh ◽  
Krzysztof Formela ◽  
...  
Keyword(s):  
Thermal Stability ◽  
Degradation Kinetics ◽  
Halloysite Nanotubes ◽  
Butadiene Rubber ◽  
Order Model ◽  
Scanning Calorimetry ◽  
Theoretical Methods ◽  
Vulcanization Kinetics ◽  
Kinetics Of ◽  
Thermal Stability Of

The effect of several concentrations of carboxylated nitrile butadiene rubber (XNBR) functionalized halloysite nanotubes (XHNTs) on the vulcanization and degradation kinetics of XNBR/epoxy compounds were evaluated using experimental and theoretical methods. The isothermal vulcanization kinetics were studied at various temperatures by rheometry and differential scanning calorimetry (DSC). The results obtained indicated that the nth order model could not accurately predict the curing performance. However, the autocatalytic approach can be used to estimate the vulcanization reaction mechanism of XNBR/epoxy/XHNTs nanocomposites. The kinetic parameters related to the degradation of XNBR/epoxy/XHNTs nanocomposites were also assessed using thermogravimetric analysis (TGA). TGA measurements suggested that the grafted nanotubes strongly enhanced the thermal stability of the nanocomposite.

Grain Growth in Nanocrystalline Nickel

1999 ◽  
Vol 580 ◽  
Author(s):  
G.D. Hibbard ◽  
U. Erb ◽  
K.T. Aust ◽  
G. Palumbo
Keyword(s):  
Thermal Stability ◽  
Grain Size ◽  
Grain Growth ◽  
Size Distributions ◽  
Nanocrystalline Nickel ◽  
Scanning Calorimetry ◽  
Solute Content ◽  
Grain Size Distributions ◽  
Thermal Stability Of ◽  
Total Solute Content

AbstractIn this study, the effect of grain size distribution on the thermal stability of electrodeposited nanocrystalline nickel was investigated by pre-annealing material such that a limited amount of abnormal grain growth was introduced. This work was done in an effort to understand the previously reported, unexpected effect, of increasing thermal stability with decreasing grain size seen in some nanocrystalline systems. Pre-annealing produced a range of grain size distributions in materials with relatively unchanged crystallographic texture and total solute content. Subsequent thermal analysis of the pre-annealed samples by differential scanning calorimetry showed that the activation energy of further grain growth was unchanged from the as-deposited nanocrystalline nickel.

Sign in / Sign up

Export Citation Format

Share Document