scholarly journals Physicochemical Characterization of Biomass Residue–Derived Biochars in Vietnam

2018 ◽  
Author(s):  
Nguyen Van Hien ◽  
Eugenia Valsami-Jones ◽  
Nguyen Cong Vinh ◽  
Tong Thi Phu ◽  
Nguyen Thi Thanh Tam ◽  
...  
Keyword(s):  
Cation Exchange ◽  
Rice Husk ◽  
Cation Exchange Capacity ◽  
Physicochemical Characterization ◽  
Chemical Properties ◽  
Exchange Capacity ◽  
Bet Surface Area ◽  
Sem Images ◽  
Surface Areas ◽  
Physico Chemical

This study compares the physico-chemical characteristics of three different types of biochar produced from biomass residues in Vietnam as a basis for optimising their application in water purification and soil fertilisation.  Wood biochar (WBC), rice husk biochar (RBC), and bamboo biochar (BBC) were produced under limited oxygen conditions using equipment available locally in Vietnam, known as a Top-Lid Updraft Drum (TLUD). The resulting biochars were characterised using a suite of state-of-the-art methods to understand their morphology, surface chemistry and cation exchange capacity.  Surface areas (measured by BET) for WBC and BBC were 479.34 m2/g and 434.53 m2/g, respectively, significantly higher than that of RBC which was only 3.29 m2/g.  The morphology as shown in SEM images corresponds with the BET surface area, showing a smooth surface for RBC, a hollow surface for BBC, and a rough surface for WBC.  All three biochars produced alkaline, with pH values around 10, and all have high carbon contents (47.95 - 82.1 %).  Cation exchange capacity (CEC) was significantly different (p<0.05) among the biochars, being 26.70 cmol/kg for RBC, 20.7 cmol/kg for BBC, and 13.53 cmol/kg for WBC, which relates to the cations (Ca, Mg, K) and functional groups with negative charge (carboxyl, hydroxyl) present on the biochar surfaces.  The highest contents of Ca, Mg and K in rice husk BC may explain its highest CEC values.  Thus, although the biochars were produced by the same method, the various feedstocks lead to quite different physico-chemical properties.  Ongoing work is linking these physico-chemical properties to the biochar efficiencies in terms of nitrate and ammonia capture capacities for use as fertilisers, and for adsorption of heavy metals (Zn, Cu) or water filtration, in order to design optimal biochar properties for specific applications.

scholarly journals Physico-chemical Properties of Soil of Rangapani Tea Estate of Bangladesh

2011 ◽  
Vol 3 (3) ◽  
pp. 683-688
Author(s):  
M. N. Islam ◽  
A. F. M. Sanaullah
Keyword(s):  
Cation Exchange ◽  
Cation Exchange Capacity ◽  
Chemical Properties ◽  
Clay Content ◽  
Exchange Capacity ◽  
Soil Samples ◽  
Physico Chemical ◽  
Different Depths ◽  
Chemical Properties Of Soils ◽  
Topographic Positions

Bangladesh is one of the tea producing countries of the world. It has 163 tea estates. Rangapani is a low yielding tea estate relative to other neighboring tea estates of Chittagong district in Bangladesh. A total 54 soil samples were collected from six different hills and three topographic positions having different depths of Rnagapanni Tea-Estate. Physico-Chemical properties of soils such as active acidity, reserve acidity, cation exchange capacity and clay content of the collected soil samples were determined. The measured parameters of the soil samples were plotted and analyzed with reference to site and topography. The parameters have been found to vary with sampling sites, depths and topography. Active acidity and reserve acidity were very low, with some exceptions compared to the optimum range for tea cultivation. Sand, silt, clay and cation exchange capacity (CEC) were found in reasonable range Keywords:  Soil; Active acidity; Reserve acidity; Cation exchange capacity; Clay content. © 2011 JSR Publications. ISSN: 2070-0237 (Print); 2070-0245 (Online). All rights reserved. doi: 10.3329/jsr.v3i3.7503               J. Sci. Res. 3 (3), 683-688 (2011)

scholarly journals Effect оf delamination оn physico-chemical properties of kaolin

2021 ◽  
Vol 53 (2) ◽  
pp. 253-266
Author(s):  
Slavica Mihajlovic ◽  
Milica Vlahovic ◽  
Nenad Vusovic ◽  
Natasa Djordjevic ◽  
Marina Jovanovic
Keyword(s):  
Crystal Structure ◽  
Particle Size ◽  
Cation Exchange ◽  
Friction Force ◽  
Layered Structure ◽  
Cation Exchange Capacity ◽  
Chemical Properties ◽  
Exchange Capacity ◽  
Physico Chemical ◽  
Plastic Processing

To provide the quality required for its use, raw kaolin must be subjected to certain processing procedures like delamination which is applied to the layered structure materials. The aim of this research is to determine the possibility of performing delamination in the extruder and to estimate the effects of this process on the physico-chemical properties of kaolin. The results showed that delamination can be efficiently realized in the extruder by shearing densely packed layers under the influence of friction force and added Na2CO3 electrolyte. The crystal structure of the system was thus disrupted. This was confirmed by the Hinckley index (HI) decrease and by the dilatometric characteristics changes during heating. The particle size was reduced and, furthermore, new adsorption centers were formed, which led to an increase in the total cation exchange capacity (CEC). The plasticity of kaolin decreased with the increasing delamination degree, as well as the amount of water required for plastic processing, which is favorable in drying ceramic products.

scholarly journals Radiation-induced Grafting of Styrene onto Polyethylene Films for Preparation of Cation Exchange Membranes: Effect of Crosslinking+

2017 ◽  
Vol 2 (1) ◽  
Author(s):  
M. M. Nasef ◽  
H. Saidi ◽  
A. H. Yahaya
Keyword(s):  
Cation Exchange ◽  
Chemical Properties ◽  
Exchange Capacity ◽  
Gravimetric Analysis ◽  
Scanning Calorimetry ◽  
Swelling Properties ◽  
Ion Exchange Capacity ◽  
Physico Chemical ◽  
Styrene Divinylbenzene ◽  
Radiation Induced

Crosslinked cation exchange membranes bearing sulfonic acid groups (PE-g-PSSA/DVB) were prepared by radiationinduced grafting of styrene/divinylbenzene (DVB) mixtures onto low density polyethylene (PE) films followed by sulfonation reactions. The effect of addition of DVB (2 and 4%) on the grafting behavior and the physico-chemical properties of the membranes such as ion exchange capacity, swelling and ionic conductivity were evaluated incorrelation with grafting yield (Y%). The structural and thermal properties of the membranes were also studied using differential scanning calorimetry (DSC) and thermal gravimetric analysis (TGA), respectively. Crosslinking with DVB was found to considerably affect the properties of the membranes in a way that reduces the swelling properties and enhances the chemical stability. The ion conductivity of the crosslinked membranes recorded a level of 10–2 S/cm at sufficient grafting yield (28%) despite the reduction caused by the formation of crosslinking structure. The results of this work suggest that membranes prepared in this study are potential alternatives for various electrochemical applications.

scholarly journals Eosin Removal by Cetyl Trimethylammonium-Cloisites: Influence of the Surfactant Solution Type and Regeneration Properties

Molecules ◽  
2019 ◽  
Vol 24 (16) ◽  
pp. 3015
Author(s):  
Fethi Kooli ◽  
Souad Rakass ◽  
Yan Liu ◽  
Mostafa Abboudi ◽  
Hicham Oudghiri Hassani ◽  
...  
Keyword(s):  
Cation Exchange ◽  
Clay Mineral ◽  
Salt Solution ◽  
Cation Exchange Capacity ◽  
Chemical Properties ◽  
Surfactant Solution ◽  
Exchange Capacity ◽  
Maximum Temperature ◽  
Basal Spacing ◽  
Xrd Techniques

The effect of the counteranion of hexadecyltrimethylammonium salts on the physico-chemical properties of organoclays was investigated, using a selected natural clay mineral with a cation exchange capacity of 95 meq/100 g. The uptake amount of C16 cations was dependent on the hexadecyltrimethylammonium (C16) salt solution used, the organoclay prepared from C16Br salt solution exhibited a value of 1. 05 mmole/g higher than those prepared from C16Cl and C16OH salt solutions. The basal spacing of these organoclays was in the range of 1.81 nm to 2.10 nm, indicating a similar orientation of the intercalated surfactants, and could indicated that the excess amount of surfactants, above the cation exchange capacity of 0.95 meq/g could be adsorbed on the external surface of the clay mineral sheets. These organoclays were found to be stable in neutral, acidic, and basic media. The thermal stability of these organoclays was carried out using thermogravimetric analysis and in-situ X-ray diffraction (XRD) techniques. The decomposition of the surfactant occurred at a maximum temperature of 240 °C, accompanied with a decrease of the basal spacing value close to 1.42 nm. The application of these organoclays was investigated to remove an acidic dye, eosin. The removal amount was related to the initial used concentrations, the amount of the surfactants contents, and to the preheated temperatures of the organoclays. The removal was found to be endothermic process with a maximum amount of 55 mg of eosin/g of organoclay. The value decreased to 25 mg/g, when the intercalated surfactants were decomposed. The reuse of these organoclays was limited to four regeneration recycles with a reduction of 20 to 30%. However, noticeable reduction between 35% to 50% of the initial efficiency, was achieved after the fifth cycle, depending of the used organoclays.

scholarly journals THE EFFECTIVENESS OF COMPOST, HUMIC ACID AND PURE FULVATE ON IMPROVEMENT OF ULTISOL SOIL CHEMICAL PROPERTIES

2021 ◽  
pp. 247-254
Author(s):  
Resman ◽  
Sahta Ginting ◽  
Muhammad Tufaila ◽  
Fransiscus Suramas Rembon ◽  
Halim
Keyword(s):  
Humic Acid ◽  
Cation Exchange ◽  
Cation Exchange Capacity ◽  
Chemical Properties ◽  
Fulvic Acids ◽  
Exchange Capacity ◽  
Humic And Fulvic Acids ◽  
Total N ◽  
Organic C ◽  
Exchangeable Al

The research aimed to determine the effectiveness of compost containing humic and fulvic acids, and pure humic and fulvic acids in increasing of Ultisol soil chemical properties. The research design used a randomized block design (RBD), consisting of 10 treatments, namely K0: 0 g polybag-1, KO1: 500 g polybag-1, KO2: 500 g polybag-1, KO3: 500 g polybag-1, KO4: 500 g polybag-1, KO5: 500 g polybag-1, KO6: 500 g polybag-1, KO7: 500 g of polybags-1, H: 50 g of polybag-1, A: 500 g polybag-1. Each treatment was repeated three times and obtained 30 treatment units. The results showed that pH H2O (K0: 4.49, KO1: 5.64, KO2: 5.47, KO3: 5.43, KO4: 5.51, KO5: 5.39, KO6: 5.48, KO7: 6.17, H: 5.06, F: 5.15), total-N (%) (K0: 0.13, KO1: 0.17, KO2: 0.18, KO3: 0.30, KO4: 0.25, KO5: 0.24, KO6: 0.29, KO7: 0.36, H: 0.16, F: 0.14), organic-C (%) (K0: 1.85, KO1; 2.30, KO2: 2.24, KO3: 2.33, KO4: 2.62, KO5: 2.25, KO6: 2.27, KO7: 2.95, H: 2.32, F: 2.26) , available-P (%) (K0: 2.75, KO1: 3.24, KO2: 3.16, KO3: 3.27, KO4: 3.57, KO5: 3.31, KO6: 3.37, KO7: 3.89, H: 3.10, F: 3.12), exchangeable-Al (me100g-1) (K0: 2.51, KO1: 2.11, KO2: 2.13, KO3: 2.15, KO4: 1.88, KO5: 2.14, KO6: 2.12, KO7: 1.75, H: 2.16, F: 2.17), base saturation (%) (K0: 30.91, KO1: 63.48, KO2: 52.63, KO3: 53.76, KO4: 56.13, KO5: 54.96, KO6: 56.71, KO7: 65.53, H: 39.11, F: 42.76), cation exchange capacity (me100g-1) (K0: 12.76, KO1: 15.64, KO2: 14.86, KO3: 14.35, KO4: 14.13, KO5: 15.01, KO6: 15.50, KO7: 17.94, H: 14.19, F: 13.73). The combined compost treatment of three types of organic matter (Imperata cylindrica + Rice straw + Glincidia sepium) is more effective in increasing the pH, H2O as 37.42%, total-N as 176.92%, Organic-C as 59.46%, available-P as 41.45%, base saturation as 65.53%, cation exchange capacity as 17.94% and exchangeable -Al, Alreduction as 30.28% of ultisol soil. KEY WORDS: compost, humic acid, fulvate, soil chemical, ultisol

scholarly journals Chemical properties of long-term irrigated Fluvisols of the Beli Drim river valley in the Klina region (Serbia)

2021 ◽  
Vol 70 (1) ◽  
pp. 13-26
Author(s):  
Miodrag Tolimir ◽  
Branka Kresović ◽  
Borivoj Pejić ◽  
Katarina Gajić ◽  
Angelina Tapanarova ◽  
...  
Keyword(s):  
Cation Exchange ◽  
Cation Exchange Capacity ◽  
Humus Content ◽  
Chemical Properties ◽  
Base Cations ◽  
Exchange Capacity ◽  
Base Saturation ◽  
Basic Cations ◽  
Hydrolytic Acidity

The impact of long-term (> 100 yr) irrigation on soil chemical properties was studied on eight plots in the Beli Drim river valley in Kosovo and Metohija near Klina, Serbia. For these studies, soil samples from shallow profiles were collected from only one or two depth zones of the Ah horizon; and from moderately deep and deep profiles, from two to three depth zones for the purpose of comparing irrigated field and non-irrigated meadow lands. Water from the Beli Drim River and surface gravity systems (irrigation furrows or border strip irrigation) were used for irrigation. Chemical variables included determination of pH-H2O, content of CaCO3, content of humus, hydrolytic acidity, sum of basic cations, cation exchange capacity, and base saturation. On irrigated soils, the results of chemical analysis showed on average a small increase in pH-H2O (0.07 pH units), as well as a significant decrease in humus content (2.00-4.75%), sum of basic cations (4.98-12.98%) and cation exchange capacity (12.8%) compared to the non-irrigated land of the study area. Long-term irrigation had no effect on hydrolytic acidity and base saturation in the Ah horizon of the investigated lands. Namely, the mentioned variations in the chemical properties of the investigated soils show that slight processes of reduction in the humus content and reduction of the content of base cations occured. Data on the chemical properties of the investigated soils indicate that the destructive processes of reduction in the humus content and leaching of base cations must be controlled in order to achieve a stable sustainable system of high productivity and prevent their further deterioration.

scholarly journals Physicochemical Parameters and Heavy Metals Content of Soil Samples from Farms in Minna

2015 ◽  
Vol 58 ◽  
pp. 154-163
Author(s):  
Z. Abdulhamid ◽  
E.B. Agbaji ◽  
C.E. Gimba ◽  
A.S. Agbaji
Keyword(s):  
Heavy Metals ◽  
Cation Exchange Capacity ◽  
Physicochemical Parameters ◽  
Chemical Properties ◽  
Absorption Spectrometry ◽  
Exchange Capacity ◽  
Average Concentration ◽  
Soil Samples ◽  
Ph Values ◽  
Physico Chemical

Physico-chemical properties and heavy metals content of soils were determined from seven farms in Minna, central Nigeria. Conventional analytical methods were employed to determine the physico-chemical properties and the heavy metals were analysed by atomic absorption spectrometry. The result showed that pH values ranged from 6.64 - 7.70 indicating slight acidity to slight alkalinity of the soils. The total organic carbon values ranged from 0.95-2.25 % resulting in the presence of organic matter (1.63-3.87). The electrical conductivity values ranged from 17-37 μS/cm. The cation exchange capacity of the soil samples ranged from 3.68-5.15 cmol/kg. The heavy metals levels were in the following range: Cd (0.00018-0.00134 mg/g), Cu (0.0069-0.0476 mg/g), Fe (1.942-2.2059 mg/g), Mn (0.1825-0.3696 mg/g), Ni (0.0065-0.0069 mg/g) and Zn (0.0157-0.2252 mg/g). The concentration of the metals in the soil samples varied according to the following trend: Fe>Mn>Zn> Cu>Ni>Cd. The average concentration of all the metals in each farm also gave the trend Farm B>Farm G>Farm E>Farm C>Farm F>Farm D>Farm A. The findings indicate the presence of heavy metals in all the farms but only Fe was above the FAO/WHO standards.

scholarly journals Characteristics of Soils Developing from Gabbro, Phyllite and Chert Parent Rock in Karangsambung District

2019 ◽  
Vol 4 (3) ◽  
pp. 131
Author(s):  
Ratna Taher ◽  
Makruf Nurudin ◽  
Eko Hanudin
Keyword(s):  
Cation Exchange ◽  
Cation Exchange Capacity ◽  
Particle Density ◽  
Chemical Properties ◽  
Clay Content ◽  
Exchange Capacity ◽  
Parent Rock ◽  
Soil Morphology ◽  
Total N ◽  
Organic C

Understanding the nature of the soil is very important to know the potential and the proper management of the soil. This study aimed to determine the differences in morphological, physical, and chemical properties of the soils developing from gabbro, phylitte and chert parent materials. The soil profile was made to represent each parent rock of gabbro, phyllite and chert located on the upper and middle slopes with pine-dominated vegetation and mixed gardens. Observation in the field is a professional description to observe soil morphology. Soil samples were taken at each horizon to analyze soil physical properties (bulk density, particle density, and texture), soil chemical properties (pH, exchanged cations, cation exchange capacity, available P, organic C, and total N). Texture analysis results showed that clay content of the soil developing from parent rock of Gabro 1 is the highest, followed by the soil clay content from  Chert 1, Phyllite 1, Chert 2, Phyllite 2, and Gabbro 2, respectively. The order of soil acidity level (pH) is Gabbro 2 > Gabbro 1> Chert 1 ~ Chert 2 > Phyllite 1 ~ Phyllite 2. Meanwhile, the order of the cation exchange capacity is Gabbro 1> Gabbro 2> Phyllite 1> Chert 1> Phyllite 2> Chert 2, and the order of the base saturation is Chert 2> Gabbro 2> Chert 1> Phyllite 2 > Phyllite1> Gabbro 1.

Sign in / Sign up

Export Citation Format

Share Document