scholarly journals Plasma Channel Extension by Femtosecond Laser Filamentation with a Circular Aperture Quartz Plate

2020 ◽  
Author(s):  
Yao Li ◽  
Ze-liang Zhang ◽  
Hai-ying Song ◽  
Xun Liu ◽  
Wei Li ◽  
...  
Keyword(s):  
Femtosecond Laser ◽  
Plasma Channel ◽  
Experimental Results ◽  
Quartz Plate ◽  
Circular Aperture ◽  
New Approach ◽  
Different Diameters ◽  
Focusing Lens ◽  
Pulse Energies ◽  
Filament Plasma

We propose a new approach of extending the laser filament plasma channel. By adding a circular aperture quartz plate before the focusing lens, the extension of the plasma channel is doubled. The effects of different diameters, thicknesses of the circular aperture quartz plate and different pulse energies on the length of the plasma channel were investigated. The experimental results show that the thickness of the quartz plate and the depth of the hole have little effects on the plasma channel of the filament, and the diameter of the hole in the center of the quartz plate has a significant effect on the length of the optical filament. The moving-focus model is used to explain the extension of the optical filament.

scholarly journals FABRICATION OF PERIODIC ARRAYS OF MICROHOLES IN THIN Ag-FILMS BY FEMTOSECOND LASER PULSES

2017 ◽  
Vol 55 (1) ◽  
pp. 35
Author(s):  
Nguyễn Thị Huyền Trang
Keyword(s):  
Femtosecond Laser ◽  
Laser Pulses ◽  
Femtosecond Laser Pulses ◽  
Periodic Arrays ◽  
Spr Imaging ◽  
Surface Enhanced ◽  
Micro Holes ◽  
Strong Focusing ◽  
Different Diameters ◽  
Pulse Energies

Arrays of microholes with different diameters of micro-holes 2, 3, 4 μm and period 6 μm were produced in thin silver films with thicknesses 30, 50, 100, 150 nm by single femtosecond laser pulses with variable pulse energies, focused by different strong focusing optics. The microarray format is used for surface plasmon resonance (SPR) imaging, surface-enhanced IR adsorption (SEIRA) and its potential for applications in multiplex sensing.

Yaw Galloping of a TLWP Platform Under High Speed Currents by Analytical Methods and its Comparison With Experimental Results

2017 ◽  
Author(s):  
Francisco Lamas ◽  
Miguel A. M. Ramirez ◽  
Antonio Carlos Fernandes
Keyword(s):  
High Speed ◽  
Production Systems ◽  
Experimental Tests ◽  
Experimental Results ◽  
Analytical Methodology ◽  
New Approach ◽  
Laboratory Facilities ◽  
Polynomial Curve ◽  
Computational Fluid Dynamics Cfd ◽  
Cfd Analyses

Flow Induced Motions are always an important subject during both design and operational phases of an offshore platform life. These motions could significantly affect the performance of the platform, including its mooring and oil production systems. These kind of analyses are performed using basically two different approaches: experimental tests with reduced models and, more recently, with Computational Fluid Dynamics (CFD) dynamic analysis. The main objective of this work is to present a new approach, based on an analytical methodology using static CFD analyses to estimate the response on yaw motions of a Tension Leg Wellhead Platform on one of the several types of motions that can be classified as flow-induced motions, known as galloping. The first step is to review the equations that govern the yaw motions of an ocean platform when subjected to currents from different angles of attack. The yaw moment coefficients will be obtained using CFD steady-state analysis, on which the yaw moments will be calculated for several angles of attack, placed around the central angle where the analysis is being carried out. Having the force coefficients plotted against the angle values, we can adjust a polynomial curve around each analysis point in order to evaluate the amplitude of the yaw motion using a limit cycle approach. Other properties of the system which are flow-dependent, such as damping and added mass, will also be estimated using CFD. The last part of this work consists in comparing the analytical results with experimental results obtained at the LOC/COPPE-UFRJ laboratory facilities.

A modified resistance to compression (RtC) test for evaluation of natural fiber softness

2022 ◽  
pp. 004051752110694
Author(s):  
Hao Yu ◽  
Christopher Hurren ◽  
Xin Liu ◽  
Stuart Gordon ◽  
Xungai Wang
Keyword(s):  
Compression Test ◽  
Natural Fiber ◽  
Natural Fibers ◽  
Assessment Method ◽  
Fiber Types ◽  
New Approach ◽  
Additional Information ◽  
Significant Difference ◽  
Single Force ◽  
Different Diameters

Comfort is a key feature of any clothing that relates significantly to softness of the fiber, yarn and fabric from which is it constructed. A known softness assessment method for fibers is the resistance to compression test. This traditional test only provides a single force value for the resistance of a loose fiber sample using a fixed mass under compression. In this research, a modified resistance to compression test was introduced to show the effects of repeated compression, providing more information about the softness and resilience of selected fibers. Three different natural fiber types, including wool, cotton and alpaca were compared using this new approach. The results showed compression profiles were quite different for different fiber types as well as for the same fibers with different diameters. While the diameters of the wool and alpaca samples were similar (18.5 μm), the modified resistance to compression values were significantly higher for wool (with a peak value at 9.5 kPa compared to 2.1 kPa for alpaca). Cotton was different from wool and alpaca but showed a similar modified resistance to compression value (10.4 kPa) to wool. During cycles of compression, modified resistance to compression peak values decreased slightly and then tended to be constant. Even though the structures of wool, cotton and alpaca were quite different, there was no significant difference in the magnitude of decline in modified resistance to compression peak values. This means that the modified resistance to compression test is able to provide additional information on the resilience characteristics of different natural fibers, and can reveal the resistance behavior of fiber samples during cyclic compression.

Prediction of soot formation rates: a new approach

1974 ◽  
Vol 338 (1614) ◽  
pp. 375-396 ◽  
Keyword(s):  
Soot Formation ◽  
Rocket Engine ◽  
Experimental Results ◽  
Intermediate Species ◽  
New Approach ◽  
Fundamental Model ◽  
Gas Reactions ◽  
Gaseous Hydrocarbons ◽  
Controlling Processes ◽  
Exhaust Jet

Five processes controlling the production of soot from gaseous hydrocarbons are distinguished: gas reactions producing radical fragments on which nucleation may begin; nucleation; coagulation; growth; and oxidation. A fundamental model capable of taking into account all these processes is described. The model is applied to the conditions of a practical rocket engine, in which production of soot in the exhaust jet is governed by the rate of pyrolysis of methane in the chamber. Predictions made for these conditions agree with experimental results. The rate controlling processes and key intermediate species are identified.

A New Approach for Autonomous Robot Obstacle Avoidance Using PSD Infrared Sensor Combined with Digital Compass

2014 ◽  
Vol 511-512 ◽  
pp. 101-104 ◽  
Author(s):  
Yang Xue ◽  
Jun Tao Yang ◽  
Ya Ling Dong ◽  
Jia Li Shen ◽  
Ru Peng ◽  
...  
Keyword(s):  
Mobile Robots ◽  
Obstacle Avoidance ◽  
Autonomous Robot ◽  
Experimental Results ◽  
Position Sensitive Detector ◽  
Infrared Sensor ◽  
Sensitive Detector ◽  
New Approach ◽  
Position Sensitive

This paper presents a new approach for obstacle avoidance of small mobile robots, which combine the position sensitive detector (PSD) with digital compass. It is important for an autonomous robot to explore its surroundings in performing the task of localization and navigation for searching. Because of the complexity of the environment, one simple kind of sensors is not sufficient for robot to accomplish these tasks. In this paper, the small mobile robots are enabled to identify barriers and distinguish surroundings by using the angle signal from the digital compass which is generally mounted on the robot. Experimental results indicate that this approach based on digital compass shows great potential in autonomous robot obstacle avoidance.

A plasma channel scheme for the interaction of an intense femtosecond laser pulse with a deuterium cluster jet

2008 ◽  
Vol 47 (2) ◽  
pp. 303-307 ◽  
Author(s):  
G. L. Chen ◽  
H. Y. Lu ◽  
C. Wang ◽  
J. S. Liu ◽  
R. X. Li ◽  
...  
Keyword(s):  
Laser Pulse ◽  
Femtosecond Laser ◽  
Femtosecond Laser Pulse ◽  
Plasma Channel

The Influence of Surface Texture on Abrasive Wear

2019 ◽  
Vol 823 ◽  
pp. 33-40 ◽  
Author(s):  
Yu Tong Hu ◽  
Yong Yong He ◽  
Wei Wang
Keyword(s):  
Friction Coefficient ◽  
Femtosecond Laser ◽  
Abrasive Wear ◽  
White Light ◽  
Surface Texture ◽  
Friction Surface ◽  
Surface Texturing ◽  
Experimental Results ◽  
The Relationship ◽  
Main Factor

Friction happens everywhere. Abrasives generated in tribological process will result in secondary wear. Abrasive wear is a kind of rather common but harmful wear, which is the main reason for the damage of fifty-percent mechanical components by friction. Surface texturing is an effective method to improve the tribological and lubricating performance of tribo-pairs. In this paper, with different-size diamond particles added into the lubricant and a surface of the tribo-pairs textured by different parameters (diameter and depth) with femtosecond laser, the relationship between the surface texture and the abrasive wear was researched, and the influence of the texture on the abrasive wear was analyzed. The friction experiments were carried out on UMT3. The microstructures were tested and analyzed by SEM, microscope and White Light Interferometer respectively. The experimental results showed that the size of the surface texture, compared with that of abrasives, is the main factor which determines the friction coefficient. As the size of the surface texture is much bigger than that of the abrasives, the texture can accommodate the abrasives efficiently, and thus the friction coefficient is reduced efficiently.

scholarly journals Study of the formation of 3-D titania nanofibrous structure by MHz femtosecond laser in ambient air

2021 ◽  
Author(s):  
Amirhossein Tavangar ◽  
Bo Tan ◽  
Krishnan Venkatakrishnan
Keyword(s):  
Laser Ablation ◽  
Femtosecond Laser ◽  
Deposition Rate ◽  
Femtosecond Laser Ablation ◽  
Ambient Air ◽  
Experimental Results ◽  
Laser Parameters ◽  
Nanofibrous Structure ◽  
Titania Nanostructures ◽  
Multiple Pulses

In this study, we describe the formation mechanism of web-like three-dimensional (3-D) titania nanofibrous structures during femtosecond laser ablation of titanium (Ti) targets in the presence of background air. First, we demonstrate the mechanism of ablation of Ti targets by multiple femtosecond laser pulses at ambient air in an explicit analytical form. The formulas for evaporation rates and the number of ablated particles, which is analogous to the deposition rate of the synthesized nanofibers, for the ablation by a single pulse and multiple pulses as a function of laser parameters, background gas, and material properties are predicted and compared to experimental results. Afterwards, the formation of nanofibrous structures is demonstrated by applying an existing simplified kinetic model to Ti targets and ambient conditions. The predicted theory provides nanofiber diameter dependency with the combination of laser parameters, target properties, and ambient gas characteristics. Experimental studies are then performed on titania nanofibrous structures synthesized by laser ablation of Ti targets using MHz repletion-rate femtosecond laser at ambient air. The models' predictions are then compared with the experimental results, where nanostructures with different morphologies are manufactured by altering laser parameters. Our results indicate that femtosecond laser ablation of Ti targets at air background yields crystalline titania nanostructures. The formation of crystalline titania nanostructures is preceded b thermal mechanism of nucleation and growth. The results point out that laser pulse repetition and dwell time can control the density, size, and pore size of the engineered nanofibrous structure. As the deposition rate of nanostructures is analogous to the ablation rate of the target, higher density of nanofibrous structure is seen at greater laser fluences. The predicted theory can be applied to predict ablation mechanism and nanofiber formation of different materials.

scholarly journals UWB elliptical patch monopole antenna with dual-band notched characteristics

2019 ◽  
Vol 9 (5) ◽  
pp. 3591
Author(s):  
A H Majeed ◽  
K H Sayidmarie
Keyword(s):  
Radiation Pattern ◽  
Ground Plane ◽  
Monopole Antenna ◽  
Experimental Results ◽  
Dual Band ◽  
New Approach ◽  
Compact Size

<p class="Default">In this paper, a new approach to the design of an UWB monopole antenna with dual band-notched characteristics is presented.   The antenna has the form of an elliptical monopole over a ground plane having an elliptical slot to achieve the UWB. The dual-band notch function is created by inserting a U-shaped and a C-shaped slots on the radiating patch, thus no extra size is needed. The proposed antenna shows a good omnidirectional radiation pattern across the band from 3.2 to more than 14 GHz. The dual band-rejection is for 4.88-5.79GHz centered at 5.4GHz and 7.21-8.46 GHz centered at 7.8 GHz. The antenna prototype using the FR-4 substrate with ε<sub>r</sub>=4.3 has a compact size of 25mm×25 mm ×1.45mm. The fabricated prototype showed experimental results comparable to those obtained from the simulations.</p>

Sign in / Sign up

Export Citation Format

Share Document