scholarly journals A Novel Method for Analyzing Highly Renewable and Sector-coupled Sub-national Energy Systems–Case Study of Schleswig-Holstein

2021 ◽  
Author(s):  
Md. Nasimul Islam Maruf
Keyword(s):  
Energy Demand ◽  
Power Plants ◽  
Energy Systems ◽  
Energy Transition ◽  
Heat Pumps ◽  
Offshore Wind ◽  
Small Scale ◽  
Ground Source Heat Pumps ◽  
Feasible Solutions

The energy transition requires integration of different energy carriers, including electricity, heat, and transport sectors. Energy modeling methods and tools are essential to provide a clear insight into the energy transition. However, the methodologies often overlook the details of small-scale energy systems. The study states an innovative approach to facilitate sub-national energy systems with 100% renewable penetration and sectoral integration. An optimization model, OSeEM-SN, is developed under the Oemof framework. The model is validated using the case study of Schleswig-Holstein. The study assumes three scenarios representing 25%, 50%, and 100% of the total available biomass potentials. OSeEM-SN reaches feasible solutions without additional offshore wind investment, indicating that they can be reserved for supplying other states’ energy demand. The annual investment cost varies between 1.02 bn – 1.44 bn €/yr for the three scenarios. The electricity generation decreases by 17%, indicating that with high biomass-based combined heat and power plants, the curtailment from other renewable plants can be decreased. Ground source heat pumps dominate the heat mix; however, their installation decreases by 28% as the biomass penetrates fully into the energy mix. The validation confirms OSeEM-SN as a beneficial tool to examine different scenarios for sub-national energy systems.

scholarly journals A Novel Method for Analyzing 100% Renewable and Sector-coupled Sub-national Energy Systems–Case Study of Schleswig-Holstein

2021 ◽  
Author(s):  
Md. Nasimul Islam Maruf
Keyword(s):  
Energy Demand ◽  
Power Plants ◽  
Energy Systems ◽  
Energy Transition ◽  
Heat Pumps ◽  
Offshore Wind ◽  
Small Scale ◽  
Ground Source Heat Pumps ◽  
Feasible Solutions

The energy transition requires integration of different energy carriers, including electricity, heat, and transport sectors. Energy modeling methods and tools are essential to provide a clear insight into the energy transition. However, the methodologies often overlook the details of small-scale energy systems. The study states an innovative approach to facilitate sub-national energy systems with 100% renewable penetration and sectoral integration. An optimization model, OSeEM-SN, is developed under the Oemof framework. The model is validated using the case study of Schleswig-Holstein. The study assumes three scenarios representing 25%, 50%, and 100% of the total available biomass potentials. OSeEM-SN reaches feasible solutions without additional offshore wind investment, indicating that they can be reserved for supplying other states’ energy demand. The annual investment cost varies between 1.02 bn – 1.44 bn €/yr for the three scenarios. The electricity generation decreases by 17%, indicating that with high biomass-based combined heat and power plants, the curtailment from other renewable plants can be decreased. Ground source heat pumps dominate the heat mix; however, their installation decreases by 28% as the biomass penetrates fully into the energy mix. The validation confirms OSeEM-SN as a beneficial tool to examine different scenarios for sub-national energy systems.

scholarly journals A Novel Method for Analyzing Highly Renewable and Sector-Coupled Subnational Energy Systems—Case Study of Schleswig-Holstein

2021 ◽  
Vol 13 (7) ◽  
pp. 3852
Author(s):  
Md. Nasimul Islam Maruf
Keyword(s):  
Energy Demand ◽  
Power Plants ◽  
Energy Systems ◽  
Energy Transition ◽  
Energy Modeling ◽  
Offshore Wind ◽  
Small Scale ◽  
Modeling Framework ◽  
Ground Source Heat Pumps

The energy transition requires an integration of different energy carriers, including electricity, heat, and transport sectors. Energy modeling methods and tools are essential to provide a clear insight into the energy transition. However, the methodologies often overlook the details of small-scale energy systems. The study states an innovative approach to facilitate subnational energy systems with 100% renewable penetration and sectoral integration. An optimization model, the “Open Sector-coupled Energy Model for Subnational Energy Systems” (OSeEM–SN), was developed under the Open Energy Modeling Framework (Oemof). The model is validated using the case study of Schleswig-Holstein. The study assumes three scenarios representing 25%, 50%, and 100% of the total available biomass potentials. OSeEM–SN reaches feasible solutions without additional offshore wind investment, indicating that it can be reserved for supplying other states’ energy demand. The annual investment cost varies between 1.02 and 1.44 bn €/year for the three scenarios. The electricity generation decreases by 17%, indicating that, with high biomass-based combined heat and power plants, the curtailment from other renewable plants can be decreased. Ground source heat pumps dominate the heat mix; however, their installation decreases by 28% as the biomass penetrates fully into the energy mix. The validation confirms OSeEM–SN as a beneficial tool to examine different scenarios for subnational energy systems.

scholarly journals Assessing Local Power Generation Potentials of Photovoltaics, Engine Cogeneration, and Heat Pumps: The Case of a Major Swiss City

Energies ◽  
2021 ◽  
Vol 14 (17) ◽  
pp. 5432
Author(s):  
Martina Crimmann ◽  
Reinhard Madlener
Keyword(s):  
Co2 Emissions ◽  
Power Plants ◽  
Energy Transition ◽  
Transition Process ◽  
Heat Pumps ◽  
End Users ◽  
Local Power ◽  
Private Households ◽  
Industrial Energy ◽  
Electricity Costs

In this paper, we investigate the potentials of distributed generation (DG) in a medium-sized Swiss city. We show the role of private households in the sustainable energy transition process induced by Swiss energy policy. For the analysis, we define six scenarios that enable us to study the potentials and impacts of different combinations of DG technologies in terms of costs, CO2 emissions, and amounts and shares of DG provided by non-industrial end-users (essentially private households and the services sector). Three variants are investigated, one with real electricity costs and CO2 emissions, one with increased electricity costs (e.g., construction of new power plants), and one with increased CO2 emissions (e.g., due to the planned nuclear phase-out in Switzerland). We find that non-industrial entities can play an important role as prosumers. They mitigate the need for centralized generation. Within a scenario where the non-industrial energy end-users install water-water heat pumps and photovoltaics, a total reduction of the gas procurement from the grid is possible whereas the electricity demand from the grid increases by 24%. This scenario reveals higher DG electricity costs in comparison to conventional electricity supply, but the total costs of energy supply decrease due to the elimination of gas supply, and the CO2 emissions can be reduced by 68%.

Complex Energy Networks Optimization: Part II — Software Application to a Case Study

2020 ◽  
Author(s):  
M. A. Ancona ◽  
M. Bianchi ◽  
L. Branchini ◽  
A. De Pascale ◽  
F. Melino ◽  
...  
Keyword(s):  
Energy Production ◽  
Internal Combustion Engines ◽  
Energy Systems ◽  
Distribution Networks ◽  
Optimal Scheduling ◽  
Small Scale ◽  
Complex Energy ◽  
Energy Networks ◽  
Energy Network

Abstract In order to increase the exploitation of the renewable energy sources, the diffusion of the distributed generation systems is grown, leading to an increase in the complexity of the electrical, thermal, cooling and fuel energy distribution networks. With the main purpose of improving the overall energy conversion efficiency and reducing the greenhouse gas emissions associated to fossil fuel based production systems, the design and the management of these complex energy grids play a key role. In this context, an in-house developed software, called COMBO, presented and validated in the Part I of this study, has been applied to a case study in order to define the optimal scheduling of each generation system connected to a complex energy network. The software is based on a non-heuristic technique which considers all the possible combination of solutions, elaborating the optimal scheduling for each energy system by minimizing an objective function based on the evaluation of the total energy production cost and energy systems environmental impact. In particular, the software COMBO is applied to a case study represented by an existing small-scale complex energy network, with the main objective of optimizing the energy production mix and the complex energy networks yearly operation depending on the energy demand of the users. The electrical, thermal and cooling needs of the users are satisfied with a centralized energy production, by means of internal combustion engines, natural gas boilers, heat pumps, compression and absorption chillers. The optimal energy systems operation evaluated by the software COMBO will be compared to a Reference Case, representative of the current energy systems set-up, in order to highlight the environmental and economic benefits achievable with the proposed strategy.

scholarly journals Selection and techno-economic analysis of hybrid ground source heat pumps used in karst regions

2020 ◽  
Vol 103 (2) ◽  
pp. 003685042092168
Author(s):  
Weisong Zhou ◽  
Peng Pei ◽  
Ruiyong Mao ◽  
Haibin Qian ◽  
Yanbing Hu ◽  
...  
Keyword(s):  
Economic Analysis ◽  
Heat Pump ◽  
Groundwater Resources ◽  
Heat Pumps ◽  
Ground Source Heat Pump ◽  
Pump System ◽  
Ground Source Heat Pumps ◽  
Ground Source ◽  
Heat Buildup

In order to take advantage of different forms of heat pumps and to mitigate thermal imbalance underground caused by long-term operation of ground source heat pumps, hybrid ground source heat pump systems have received an increasing attention. In this research, based on the fact that abundant groundwater resources are commonly available in karst regions, a new strategy is introduced for selecting and determining hybrid ground source heat pump capacity. Five scenarios of hybrid ground source heat pump system coupling groundwater source heat pumps with other supplementary heat pumps are proposed in this article to provide appropriate options to eliminate heat buildup under different hydrogeologic conditions. Methodologies for sizing and selection are established. Then, a case study of techno-economic analysis was performed for a project in the karst region in South China. The results showed that these scenarios can effectively mitigate heat buildup, and under the hydrogeologic condition in the case study. Compared to the solo ground-coupled heat pump solution, the optimal solution (Solution 4 in this study) can reduce the annual costs by 16.10% and reduce the capital investment by 60%. Methodologies developed in this study are beneficial for selecting appropriate approaches to mitigate heat buildup and enhance competitiveness of ground source heat pumps.

scholarly journals Two software tools for facilitating the choice of ground source heat pumps by stakeholders and designers

2019 ◽  
Vol 111 ◽  
pp. 06023 ◽  
Author(s):  
Michele De Carli ◽  
Amaia Castelruiz Aguirre ◽  
Angelo Zarrella ◽  
Lucia Cardoso ◽  
Sarah Noyé ◽  
...  
Keyword(s):  
Decision Making ◽  
Energy Demand ◽  
Optimal Solution ◽  
Heat Pumps ◽  
Climatic Conditions ◽  
Design Tool ◽  
Detailed Calculation ◽  
Ground Source Heat Pumps ◽  
Ground Source ◽  
Support Decision Making

For promoting the diffusion of GSHP and making the technology more accessible to the general public, in the H2020 research project “CHeap and Efficient APplication of reliable Ground Source Heat exchangers and PumpS” (acronym Cheap-GSHPs) a tool for sizing these systems has been developed, as well as a Decision Support System (DSS) able to assist the user in the preliminary design of the most suitable configuration. For all these tools a common platform has been carried out considering climatic conditions, energy demand of buildings, ground thermal properties, heat pump solutions repository, as well as renewable energy database to use in synergy with the GSHPs. Since the aims of the tools are different, there are different approaches. The design tool is mainly addressed to designers. The calculation may be done in two ways: with a simplified method based on the ASHRAE approach and with a detailed calculation based on the numerical tool CaRM (Capacity-Resistance method). The DSS final aim is to support decision-making, by providing the stakeholders at all the level with a series of scenario. The Cheap-GSHPs project has developed a DSS tool aimed at accelerating the decision-making process of designers and building owners as well as increasing market share of the Cheap-GSHPs technologies. Hence the DSS generates different possible solutions based on a defined general problem, identifying the optimal solution. Both tools are presented in the paper, showing the potentialities provided by both software.

User Innovation and Peer Assistance in Small-Scale Renewable Energy Technologies

2018 ◽  
Author(s):  
Sampsa Hyysalo ◽  
Jouni K. Juntunen
Keyword(s):  
Renewable Energy ◽  
Heat Pumps ◽  
Policy Implications ◽  
Small Scale ◽  
User Innovation ◽  
Solar Collectors ◽  
Ground Source Heat Pumps ◽  
Renewable Energy Technologies ◽  
Energy Technologies ◽  
Peer Assistance

There have been many attempts to include citizens as more active players in the proliferation of renewable energy technologies. However, the roles that citizen users play in renewables proliferation are not limited to adoption, but include technological domestication, innovation, and market creation. This chapter first reviews innovation by citizen users in the early phases of small-scale renewable energy technologies (S-RET) technology development in wind turbines, solar collectors, and low-energy housing. It then examines user innovation and peer assistance in the later phases of diffusion in air-source and ground-source heat pumps, pellet-burning systems, and solar collectors. It reviews research user motivations, diffusion pathways, and peer intermediation, and pays particular attention to how the forms of innovative citizen energy communities are changing from locality-based community energy initiatives to distributed and Internet-mediated energy communities. The chapter concludes by drawing policy implications regarding user innovation and peer assistance in the transformation of energy systems.

scholarly journals A European Database of Building Energy Profiles to Support the Design of Ground Source Heat Pumps

Energies ◽  
2019 ◽  
Vol 12 (13) ◽  
pp. 2496 ◽  
Author(s):  
Laura Carnieletto ◽  
Borja Badenes ◽  
Marco Belliardi ◽  
Adriana Bernardi ◽  
Samantha Graci ◽  
...  
Keyword(s):  
Heat Pump ◽  
Energy Demand ◽  
Residential Buildings ◽  
Building Energy ◽  
Heat Pumps ◽  
Climatic Conditions ◽  
Ground Source Heat Pumps ◽  
Heating And Cooling ◽  
Energy Profiles ◽  
Ground Source

The design of ground source heat pumps is a fundamental step to ensure the high energy efficiency of heat pump systems throughout their operating years. To enhance the diffusion of ground source heat pump systems, two different tools are developed in the H2020 research project named, “Cheap GSHPs”: A design tool and a decision support system. In both cases, the energy demand of the buildings may not be calculated by the user. The main input data, to evaluate the size of the borehole heat exchangers, is the building energy demand. This paper presents a methodology to correlate energy demand, building typologies, and climatic conditions for different types of residential buildings. Rather than envelope properties, three insulation levels have been considered in different climatic conditions to set up a database of energy profiles. Analyzing European climatic test reference years, 23 locations have been considered. For each location, the overall energy and the mean hourly monthly energy profiles for heating and cooling have been calculated. Pre-calculated profiles are needed to size generation systems and, in particular, ground source heat pumps. For this reason, correlations based on the degree days for heating and cooling demand have been found in order to generalize the results for different buildings. These correlations depend on the Köppen–Geiger climate scale.

scholarly journals Come Together—The Development of Swedish Energy Communities

2019 ◽  
Vol 11 (4) ◽  
pp. 1056 ◽  
Author(s):  
Dick Magnusson ◽  
Jenny Palm
Keyword(s):  
Rural Community ◽  
Power Plants ◽  
Energy Transition ◽  
Professional Organizations ◽  
Institutional Setting ◽  
Small Scale ◽  
Hydroelectric Power ◽  
Solar Photovoltaics ◽  
Grassroots Innovations ◽  
The Uk

Community energy (CE) and grassroots innovations have been widely studied in recent years, especially in the UK, Germany, and the Netherlands, but very little focus has been placed on Sweden. This paper describes and analyses the development and present state of several types of community energy initiatives in Sweden. The methodology uses interviews, document studies, analysis of previous studies, and website analysis. The results show that fewer initiatives have been taken in Sweden than in other countries, but that even with a rather ‘hostile’ institutional setting CE has emerged as a phenomenon. Wind cooperatives are the most common form of initiative, with solar photovoltaics cooperatives and eco-villages also prominent. The various types of initiatives differ considerably, from well-organized wind cooperatives that have grown into professional organizations to small-scale hydroelectric power plants owned by a rural community. The initiatives may have modest impact on the energy transition in quantitative terms, but they are crucial in knowledge sharing and as inspirations for future initiatives.

Sign in / Sign up

Export Citation Format

Share Document