scholarly journals A European Database of Building Energy Profiles to Support the Design of Ground Source Heat Pumps

Energies ◽  
2019 ◽  
Vol 12 (13) ◽  
pp. 2496 ◽  
Author(s):  
Laura Carnieletto ◽  
Borja Badenes ◽  
Marco Belliardi ◽  
Adriana Bernardi ◽  
Samantha Graci ◽  
...  
Keyword(s):  
Heat Pump ◽  
Energy Demand ◽  
Residential Buildings ◽  
Building Energy ◽  
Heat Pumps ◽  
Climatic Conditions ◽  
Ground Source Heat Pumps ◽  
Heating And Cooling ◽  
Energy Profiles ◽  
Ground Source

The design of ground source heat pumps is a fundamental step to ensure the high energy efficiency of heat pump systems throughout their operating years. To enhance the diffusion of ground source heat pump systems, two different tools are developed in the H2020 research project named, “Cheap GSHPs”: A design tool and a decision support system. In both cases, the energy demand of the buildings may not be calculated by the user. The main input data, to evaluate the size of the borehole heat exchangers, is the building energy demand. This paper presents a methodology to correlate energy demand, building typologies, and climatic conditions for different types of residential buildings. Rather than envelope properties, three insulation levels have been considered in different climatic conditions to set up a database of energy profiles. Analyzing European climatic test reference years, 23 locations have been considered. For each location, the overall energy and the mean hourly monthly energy profiles for heating and cooling have been calculated. Pre-calculated profiles are needed to size generation systems and, in particular, ground source heat pumps. For this reason, correlations based on the degree days for heating and cooling demand have been found in order to generalize the results for different buildings. These correlations depend on the Köppen–Geiger climate scale.

Evaluation of Ground Source Heat Pump Energy, Demand, and Greenhouse Potential in Colorado Residential Buildings

2010 ◽  
Author(s):  
Daniel Studer ◽  
Moncef Krarti
Keyword(s):  
Heat Pump ◽  
Energy Demand ◽  
Residential Buildings ◽  
Pump Energy ◽  
Hvac Systems ◽  
Heat Pumps ◽  
Ground Source Heat Pump ◽  
Ground Source Heat Pumps ◽  
Vertical Well ◽  
Ground Source

This paper summarizes the results of a detailed energy analysis carried out for a typical Colorado residence using three different HVAC systems for 10 distinct locations in Colorado. The HVAC systems considered in the analysis include: • 78% efficient furnace with a 13 SEER air conditioner; • Vertical well ground source heat pump with a heating COP of 3.5 and a cooling EER of 17.1; • Slinky ground source heat pump with a heating COP of 3.5 and a cooling EER of 17.1. The results of the analysis indicate that relative to the conventional systems, ground source heat pumps (GSHPs) offer several benefits including lower annual energy costs, electrical peak demand, and carbon emissions. However, GSHPs use more electrical energy use. Specifically, it was found that relative to a 78 AFUE furnace / 13 SEER AC system, in all locations both GSHPs, vertical well and slinky, show on average a 41.2% increase in electricity use, a 10% decrease in energy cost, a 4.5% decrease in CO2 emissions, and a 16.8% average decrease in peak summer electric demand.

scholarly journals Two software tools for facilitating the choice of ground source heat pumps by stakeholders and designers

2019 ◽  
Vol 111 ◽  
pp. 06023 ◽  
Author(s):  
Michele De Carli ◽  
Amaia Castelruiz Aguirre ◽  
Angelo Zarrella ◽  
Lucia Cardoso ◽  
Sarah Noyé ◽  
...  
Keyword(s):  
Decision Making ◽  
Energy Demand ◽  
Optimal Solution ◽  
Heat Pumps ◽  
Climatic Conditions ◽  
Design Tool ◽  
Detailed Calculation ◽  
Ground Source Heat Pumps ◽  
Ground Source ◽  
Support Decision Making

For promoting the diffusion of GSHP and making the technology more accessible to the general public, in the H2020 research project “CHeap and Efficient APplication of reliable Ground Source Heat exchangers and PumpS” (acronym Cheap-GSHPs) a tool for sizing these systems has been developed, as well as a Decision Support System (DSS) able to assist the user in the preliminary design of the most suitable configuration. For all these tools a common platform has been carried out considering climatic conditions, energy demand of buildings, ground thermal properties, heat pump solutions repository, as well as renewable energy database to use in synergy with the GSHPs. Since the aims of the tools are different, there are different approaches. The design tool is mainly addressed to designers. The calculation may be done in two ways: with a simplified method based on the ASHRAE approach and with a detailed calculation based on the numerical tool CaRM (Capacity-Resistance method). The DSS final aim is to support decision-making, by providing the stakeholders at all the level with a series of scenario. The Cheap-GSHPs project has developed a DSS tool aimed at accelerating the decision-making process of designers and building owners as well as increasing market share of the Cheap-GSHPs technologies. Hence the DSS generates different possible solutions based on a defined general problem, identifying the optimal solution. Both tools are presented in the paper, showing the potentialities provided by both software.

scholarly journals Analysis of ground thermal potential reduction and thermal interaction between boreholes during operation of ground source heat pump in Moscow city environments

2021 ◽  
Vol 289 ◽  
pp. 02006
Author(s):  
Elizaveta Tyabut ◽  
Ivan Sokolov ◽  
Artem Ryzhenkov
Keyword(s):  
Heat Pump ◽  
Mutual Influence ◽  
Energy Resource ◽  
Heat Pumps ◽  
Geothermal Field ◽  
Climatic Conditions ◽  
Ground Source Heat Pumps ◽  
Promising Alternative ◽  
Ground Source ◽  
Moscow City

Geothermal energy is a renewable energy resource. Nowadays it can be considered as a promising alternative to various fossil fuels. Ground source heat pumps are efficient installations enabling the intensive use of underground energy for heating and cooling of modern residential and commercial buildings. However, climatic conditions often limit the use of this type of installation to a certain extent. This paper presents a description of an existing system comprising a liquid-toliquid heat pump and a geothermal field consisting of 4 boreholes. The system is used to investigate the intensity of ground temperature potential decrease in winter and its recovery in summer in the Moscow city environment with a detailed study of the properties of individual soil layers, as well as to study the mutual influence of boreholes on each other, represented by the conditional radius of thermal influence of individual boreholes. Graphs of soil temperature changes at different depths are presented.

scholarly journals Experimental Study and Modeling of Ground-Source Heat Pumps with Combi-Storage in Buildings

2018 ◽  
Author(s):  
Wessam El-Baz ◽  
Peter Tzscheutschler ◽  
Ulrich Wagner
Keyword(s):  
Heat Pump ◽  
Water Consumption ◽  
Residential Buildings ◽  
Heat Pumps ◽  
Hot Water ◽  
Space Heating ◽  
Ground Source Heat Pumps ◽  
Domestic Hot Water ◽  
Ground Source ◽  
And Control

There is a continuous growth of heat pump installations in residential buildings in Germany. The heat pumps were not only used for space heating and domestic hot water consumption but also to offer flexibility to the grid. the high coefficient of performance and the low cost of heat storages made the heat pumps an optimal candidate for the power to heat applications. Thus, several questions are raised about the optimal integration and control of the heat pump system with buffer storages to maximize its operation efficiency and minimize the operation costs. In this paper, an experimental investigation is performed to study the performance of a ground source heat pump (GSHP) with a combi-storage under several configurations and control factors. The experiments were performed on an innovative modular testbed that is capable of emulating a ground source to provide the heat pump with different temperature levels at different times of the day. Moreover, it can emulate the different building loads such as the space heating load and the domestic hot water consumption in real-time. The data gathered from the testbed and different experimental studies were used to develop a simulation model based on Modelica that can accurately simulate the dynamics of a GSHP in a building. The model was validated based on different metrics. Energetically, the difference between the developed model and the measured values was only 3.08\% and 4.18\% for the heat generation and electricity consumption, respectively.

Development of design guidelines for thermo-active foundations

2017 ◽  
Vol 27 (6) ◽  
pp. 805-817 ◽  
Author(s):  
Byung C. Kwag ◽  
Moncef Krarti
Keyword(s):  
Heat Pump ◽  
Heat Pumps ◽  
Design Guidelines ◽  
Conventional Heating ◽  
Ground Source Heat Pump ◽  
External Energy ◽  
Geothermal Heat ◽  
Ground Source Heat Pumps ◽  
Heating And Cooling ◽  
Ground Source

Ground medium can be utilized as a direct energy source to heat and cool buildings. In particular, ground source heat pump systems take advantage of the year-round mild deep earth temperature without a significant reliance on any external energy sources. However, the high installation cost of ground source heat pumps associated with high drilling cost of vertical boreholes often make these systems less cost-effective compared to conventional heating and cooling systems. Thermo-active foundations can be a viable solution to reduce ground source heat pump high installation costs by embedding heat exchangers within building foundation structures. Compared to ground source heat pumps, only limited analyses and research studies have been reported for thermo-active foundations especially for the US climates. In particular, no specific design guidelines have been reported for thermo-active foundations especially for US climates. In this paper, a simplified design approach was developed and applied for specifying geothermal heat pump size and heat exchanger loop length to meet all or part of building heat and cooling thermal loads. The developed guidelines would thus provide a proper design guide for installation of thermo-active foundations for heating and cooling of both US residential and commercial buildings.

scholarly journals Geothermal energy: shallow sources

2014 ◽  
Vol 126 (2) ◽  
pp. 25
Author(s):  
Ian Johnston
Keyword(s):  
Heat Pump ◽  
Geothermal Energy ◽  
Heat Pumps ◽  
Cooling Mode ◽  
Ground Source Heat Pumps ◽  
Heating And Cooling ◽  
Ground Source ◽  
Heating Mode ◽  
To Receive ◽  
Ground Energy

Below a depth of around 5 to 8 metres below the surface, the ground displays a temperature which is effectively constant and a degree or two above the weighted mean annual air temperature at that particular location. In Melbourne, the ground temperature at this depth is around 18°C with temperatures at shallower depths varying according the season. Further north, these constant temperatures increase a little; while for more southern latitudes, the temperatures are a few degrees cooler. Shallow source geothermal energy (also referred to as direct geothermal energy, ground energy using ground source heat pumps and geoexchange) uses the ground and its temperatures to depths of a few tens of metres as a heat source in winter and a heat sink in summer for heating and cooling buildings. Fluid (usually water) is circulated through a ground heat exchanger (or GHE, which comprises pipes built into building foundations, or in specifically drilled boreholes or trenches), and back to the surface. In heating mode, heat contained in the circulating fluid is extracted by a ground source heat pump (GSHP) and used to heat the building. The cooled fluid is reinjected into the ground loops to heat up again to complete the cycle. In cooling mode, the system is reversed with heat taken out of the building transferred to the fluid which is injected underground to dump the extra heat to the ground. The cooled fluid then returns to the heat pump to receive more heat from the building.

Evaluation of Thermo-Active Foundations for Heating and Cooling Residential Buildings

2016 ◽  
Vol 138 (6) ◽  
Author(s):  
Byung Chang Kwag ◽  
Moncef Krarti
Keyword(s):  
Cost Effectiveness ◽  
Numerical Model ◽  
Simulation Analysis ◽  
Residential Buildings ◽  
Three Dimensional ◽  
Heat Pumps ◽  
Ground Source Heat Pumps ◽  
Heating And Cooling ◽  
Ground Source ◽  
The Cost

The application of thermo-active foundation (TAF) systems to heat and cool residential buildings is evaluated in this paper. First, a transient three-dimensional finite difference numerical model is developed for the analysis of thermo-active foundations. The numerical model predictions are then validated against experimental data obtained from laboratory testing. Using the validated numerical model, G-functions for TAFs are generated and integrated into whole-building simulation analysis program, energyplus. A comparative analysis is carried out to evaluate TAF systems compared to conventional ground-source heat pumps (GSHPs) to provide heating and cooling for multifamily residential buildings. In particular, the analysis compares the cost-effectiveness of TAFs and GSHPs to meet heating and cooling needs for a prototypical multifamily building in three U.S. climates. Due to lower initial costs associated to the reduced excavation costs, it is found that TAFs offer a more cost-effectiveness than GSHP systems to heat and cool multifamily residential buildings.

scholarly journals Seasonal storage of residential exhaust air and sewage waste heat

2021 ◽  
Vol 246 ◽  
pp. 06009
Author(s):  
Janne Hirvonen ◽  
Juha Jokisalo ◽  
Risto Kosonen
Keyword(s):  
Heat Pump ◽  
Waste Heat ◽  
Residential Buildings ◽  
Heat Pumps ◽  
Ground Source Heat Pump ◽  
Pump System ◽  
Ground Source Heat Pumps ◽  
Heat Pump System ◽  
Ground Source ◽  
Sewage Waste

Most Finnish residential buildings have been built before ventilation heat recovery options became mandatory. Exhaust air heat pumps are an effective way to reduce emissions, but they cannot cover all heating demand. Ground-source heat pumps can be designed to meet all loads, but they require corresponding amounts of space both above and below ground. This simulation study combines residential ventilation and sewage waste heat with a ground-source heat pump system to improve system sustainability and cost-effectiveness. A hybrid waste heat and ground-source heat pump system was shown to have 20% lower life cycle costs compared to a pure ground-source heat pump system. It also maintained sustainable ground temperature levels over the long term, while reducing above-ground space requirements by 95%.

scholarly journals Analysis of the Possibilities of Using a Heat Pump for Greenhouse Heating in Polish Climatic Conditions—A Case Study

2018 ◽  
Vol 10 (10) ◽  
pp. 3483 ◽  
Author(s):  
Artur Nemś ◽  
Magdalena Nemś ◽  
Klaudia Świder
Keyword(s):  
Heat Pump ◽  
Primary Source ◽  
Thermal Conditions ◽  
Heating System ◽  
Heat Pumps ◽  
Climatic Conditions ◽  
Ground Source Heat Pumps ◽  
Ground Source ◽  
Pollution Emissions

This article presents an analysis of selecting a seasonal heating system for an existing greenhouse. The analyzed object is located in Poland near Wroclaw, where summer flowers are grown. Appropriate thermal conditions must be ensured continuously for four heating months. The primary source of heat in the examined flower greenhouse was a coal-fired furnace. The analysis presented in the article shows a method of thermal balancing the object, determining heat demands in the analyzed period using the experiment plan, and also selecting a new heating system in the form of a heat pump. The analysis of the operation of the heating system was performed for air and ground source heat pumps to determine the profitability of their application in Polish climatic conditions. An economic analysis was also included and the investment impact on pollution emissions was calculated.

scholarly journals Critical Review on Efficiency of Ground Heat Exchangers in Heat Pump Systems

2020 ◽  
Vol 2 (2) ◽  
pp. 204-224
Author(s):  
Adel Eswiasi ◽  
Phalguni Mukhopadhyaya
Keyword(s):  
Heat Pump ◽  
Thermal Efficiency ◽  
Volumetric Flow Rate ◽  
Heat Pumps ◽  
Injection Rate ◽  
Pipe Diameter ◽  
Low Carbon ◽  
Ground Source Heat Pumps ◽  
Heating And Cooling ◽  
Ground Source

Use of ground source heat pumps has increased significantly in recent years for space heating and cooling of residential houses and commercial buildings, in both heating (i.e., cold region) and cooling (i.e., warm region) dominated climates, due to its low carbon footprint. Ground source heat pumps exploit the passive energy storage capacity of the ground for heating and cooling of buildings. The main focus of this paper is to critically review how different construction and operation parameters (e.g., pipe configuration, pipe diameter, grout, heat injection rate, and volumetric flow rate) have an impact on the thermal efficiency of the vertical ground heat exchanger (VGHE) in a ground source heat pump (GSHP) system. The published literatures indicate that thermal performance of VGHEs increases with an increase of borehole diameter and/or pipe diameter. These literatures show that the borehole thermal resistance of VGHEs decreases within a range of 9% to 52% due to pipe configurations and grout materials. Furthermore, this paper also identifies the scope to increase the thermal efficiency of VGHE. The authors conclude that in order to enhance the heat transfer rate in VGHE, any attempt to increase the surface area of the pipe configuration would likely be an effective solution.

Sign in / Sign up

Export Citation Format

Share Document