scholarly journals Installation resilience in cold regions using energy storage systems

2021 ◽  
Author(s):  
Caitlin Callaghan ◽  
Danielle Peterson ◽  
Timothy Cooke ◽  
Brandon Booker ◽  
Kathryn Trubac

Electrical energy storage (EES) has emerged as a key enabler for access to electricity in remote environments and in those environments where other external factors challenge access to reliable electricity. In cold climates, energy storage technologies face challenging conditions that can inhibit their performance and utility to provide electricity. Use of available energy storage technologies has the potential to improve Army installation resilience by providing more consistent and reliable power to critical infrastructure and, potentially, to broader infrastructure and operations. Sustainable power, whether for long durations under normal operating conditions or for enhancing operational resilience, improves an installation’s ability to maintain continuity of operations for both on- and off-installation missions. Therefore, this work assesses the maturity of energy storage technologies to provide energy stability for Army installations in cold regions, especially to meet critical power demands. The information summarized in this technical report provides a reference for considering various energy storage technologies to support specific applications at Army installations, especially those installations in cold regions.

2020 ◽  
Vol 173 ◽  
pp. 03004
Author(s):  
Darío Benavides ◽  
Paúl Arévalo ◽  
Luis G. Gonzalez ◽  
José A. Aguado

The importance of energy storage systems is increasing in microgrids energy management. In this study, an analysis is carried out for different types of energy storage technologies commonly used in the energy storage systems of a microgrid, such as: lead acid batteries, lithium ion batteries, redox vanadium flux batteries and supercapacitors. In this work, it is analyzed the process of charging and discharging (slow and fast) in these systems, the calculation of energy efficiency, performance and energy supplied under different load levels, in its normal operating conditions and installed power capacity is developed. The results allow us to choose the optimal conditions of charge and discharge at different levels of reference power, analyzing the strengths and weaknesses of the characteristics of each storage system within a microgrid.


Author(s):  
Christopher H. Wendel ◽  
Pejman Kazempoor ◽  
Robert J. Braun

Electrical energy storage (EES) is an important component of the future electric grid. Given that no other widely available technology meets all the EES requirements, reversible (or regenerative) solid oxide cells (ReSOCs) working in both fuel cell (power producing) and electrolysis (fuel producing) modes are envisioned as a technology capable of providing highly efficient and cost-effective EES. However, there are still many challenges from cell materials development to system level operation of ReSOCs that should be addressed before widespread application. One particular challenge of this novel system is establishing effective thermal management strategies to maintain the high conversion efficiency of the ReSOC. The system presented in this paper employs a thermal management strategy of promoting exothermic methanation in the ReSOC stack to offset the endothermic electrolysis reactions during charging mode (fuel producing) while also enhancing the energy density of the stored gases. Modeling and parametric analysis of an energy storage concept is performed using a thermodynamic system model coupled with a physically based ReSOC stack model. Results indicate that roundtrip efficiencies greater than 70% can be achieved at intermediate stack temperature (∼680°C) and pressure (∼20 bar). The optimal operating conditions result from a tradeoff between high stack efficiency and high parasitic balance of plant power.


2021 ◽  
Author(s):  
Harald Desing ◽  
Rolf Widmer

Our society has become accustomed to demanding energy whenever we want it. When decarbonising the energy system, this becomes a fundamental challenge due to the extent of energy storage required for matching the intermittent renewable supply to society's current demand. Available energy storage technologies are energetically expensive either to build - like batteries - or to operate - like synthetic fuels. Due to these energetic costs, requiring more storage leads to a slower energy transition and consequently higher climate risks. This paper explores the energy implications of adding energy storage to fast and complete energy transition pathways. Technological innovation can mitigate the problem to some extent by focusing on reduced energy intensity of storage alongside with improved turnaround efficiency. Most influential is, however, the extent of storage that we want: reducing storage demand greatly accelerates the transition and therefore reduces the induced probability of violating 1.5°C peak heating. In addition, it can immediately be implemented with readily available and scalable technologies. However, it requires a fundamental rethinking of the way we use energy in society: aligning energy demand with renewable supply as best as we can. Following the course of the sun, just like sunflowers do, we need to schedule our most energy-intensive activities around midday and summer, while reducing demand during night and winter. The sunflower society has the potential to accelerate climate action and therewith reduce climate risks.


Energies ◽  
2021 ◽  
Vol 14 (19) ◽  
pp. 6272
Author(s):  
Candra Saigustia ◽  
Sylwester Robak

Poland has had a total of 70 mines, but now more than half of them is out of operation. This mining closure raises with respect to the environment and unemployment. Innovative technology is needed to overcome the problems that arise and could simultaneously make use of abandoned mine infrastructure. The increased electricity generation coming from renewable energy, which produces fluctuating and intermittent energy for the electric power system, causes frequency problems such that energy storage technologies are needed. Abandoned mines can be used for the implementation of energy storage plants. This paper explores the possibility of using abandoned mines in Poland for electrical energy storage. Closed mines can be used to store clean and flexible energy. This idea has the potential to support sustainable economic development within the community following mine closure in Poland.


2019 ◽  
Vol 9 (5) ◽  
pp. 817
Author(s):  
Jong Lim ◽  
Hye Hwang ◽  
Woo Shin ◽  
Hyung-Jun Song ◽  
Young-Chul Ju ◽  
...  

In Korea, there is a rule for Renewable Energy Certification with weighting 5.0, to expand grid linkage capacity and to improve the stability of the grid to accommodate photovoltaic (PV) systems in a distributed power system. Due to this rule, many power companies and operators are trying to install electrical energy storage systems that are able to operate in conjunction with PV system power. These systems operate in parallel at the same grid connection point. This paper presents the results of case studies on the failure to detect islanding operation. Test evaluation devices that could be bi-directionally charged and discharged were implemented for an islanding detection test. Testing was conducted under a variety of operating conditions. When a single inverter was operated under the islanding condition, it was stably stopped within 0.5 s using the Korean grid-code standard. However, when two inverters were operated at the same time under the islanding condition, islanding detection failed and the two inverters continued to feed the connected RLC (resistor, inductor, capacitor) loads in the isolated section known as an island. Different algorithms used by PCS (power conversion system) manufacturers to detect islanding might cause this phenomenon. Therefore, it is necessary for a new PCS test standard to detect islanding.


Processes ◽  
2019 ◽  
Vol 7 (2) ◽  
pp. 80 ◽  
Author(s):  
Sooyoung Jung ◽  
Yong Tae Yoon

A microgrid is a group of many small-scale distributed energy resources, such as solar/wind energy sources, diesel generators, energy storage units, and electric loads. As a small-scale power grid, it can be operated independently or within an existing power grid(s). The microgrid energy management system is a system that controls these components to achieve optimized operation in terms of price by reducing costs and maximizing efficiency in energy consumption. A post-Industry-4.0 consumer requires an optimal design and control of energy storage based on a demand forecast, using big data to stably supply clean, new, and renewable energy when necessary while maintaining a consistent level of quality. Thus, this study focused on software technology through which an optimized operation schedule for energy storage in a microgrid is derived. This energy storage operation schedule minimizes the costs involved in electricity use. For this, an optimization technique is used that sets an objective function representing the information and costs pertaining to electricity use, while minimizing its value by using Mixed Integer Linear Programming or a Genetic Algorithm. The main feature of the software is that an optimal operation schedule derivation function has been implemented with MATLAB for the following circumstances: when the basic operation rules are applied, when operating with another grid, when the external operating conditions are applied, and when the internal operating conditions are applied.


2018 ◽  
Vol 11 (10) ◽  
pp. 2696-2767 ◽  
Author(s):  
Turgut M. Gür

Large scale storage technologies are vital to increase the share of renewable electricity in the global energy mix.


Sign in / Sign up

Export Citation Format

Share Document