scholarly journals Daya Gabung Galur-galur Jagung Berkualitas Protein Tinggi

2014 ◽  
Vol 33 (3) ◽  
pp. 137
Author(s):  
Muhammad Azrai ◽  
Made Jana Mejaya ◽  
Hajrial Aswidinnoor
Keyword(s):  
Combining Ability ◽  
Block Design ◽  
Mutant Gene ◽  
Inbred Lines ◽  
Agronomic Characters ◽  
Dry Land ◽  
Normal Maize ◽  
Randomized Complete Block Design ◽  
Genotype Test ◽  
Protein Components

Quality Protein Maize (QPM) is a special maize functioning as source of carbohydrate and protein, which contain protein components lysine and tryptophan higher than that of normal maize. Experiment was carried out to evaluate the combining abilities of inbred lines introgressed with opaque-2 mutant gene and their hybrid performances on grain yield and other agronomic characters. Genotype test consisted of eight lines, eight testers, sixty four hybrid crosses between lines x tester and four check varieties. The experiment was arranged in a randomized complete block design, with two replications, on the lowland in Walenreng (Bone) and on dry land in Bajeng (Gowa). Variance analyses were done following the line x tester model. Results showed that the effect of genotype x location interactions were significant for ear weight and yield characters. The grain yields of three lines showed positive and significant general combining ability those were Nei9008+o2-09 (L1), Nei9008+o2-14 (L3) and Nei9008 + o2-27 (L7), but for the tester was only MR10+o2-31 (T7). Another eight crosses were showing significant effect for specific combining ability, but only combination of Nei9008+o2-09 and o2+MR10-31 lines was significantly superior to all check hybrids.

scholarly journals Short communication: Heterosis and combining ability of Nepalese yellow maize (Zea mays L.)

2013 ◽  
Vol 3 ◽  
pp. 172-180 ◽  
Author(s):  
SR Gautam ◽  
BR Ojha ◽  
SK Ghimire ◽  
DB Gurung
Keyword(s):  
Grain Yield ◽  
Combining Ability ◽  
Quantitative Traits ◽  
Short Communication ◽  
Zea Mays L ◽  
Block Design ◽  
Winter Season ◽  
Inbred Lines ◽  
High Magnitude ◽  
Randomized Complete Block Design

Nepalese yellow maize inbred lines were characterized for general combining ability (GCA) and specific combining ability (SCA) of their crosses and parents were identified having high combining ability for determining the heterotic effects on yield and other quantitative traits of hybrids. A line x tester mating design was used for making the crosses in the winter season of 2008 and the hybrids along with their parents and four checks were evaluated in Randomized Complete Block Design (RCBD) with three replications in the spring season of 2009 at the experimental farm of the National Maize Research Program, Chitwan. Significant variations were found among the treatments for grain yield and other traits which indicated presence of high magnitude of genetic variations among tested inbred lines. The cross between RML-32 and RML-17 produced the highest grain yield (15870 kg/ha) among the crosses. Hybrids such as RL-194 x RL-84 (10770 kg/ha), RML-21 x RML-17 (9270 kg/ha), RL-180 x RML-17 (9270 kg/ha) and L-1 x RL-84 (8785 kg/ha) were found superior grain yielder. Thirty-nine hybrids showed positive mid-parent heterosis for grain yield among 40 crosses. The highest positive mid-parent heterosis for grain yield was found 880% in cross between RML-32 and RML-17, followed by RL-98X RML-17 (507%), RL-103 x RML-17 (403%), PUTU-18 x RML- 17 (351%) and RL-180 x RL 84 (316%). Agronomy Journal of Nepal (Agron JN) Vol. 3. 2013, Page 172-180 DOI: http://dx.doi.org/10.3126/ajn.v3i0.9020

scholarly journals Pendugaan Daya Gabung dan Nilai Heterosis Hasil Persilangan Half Diallel Cabai Rawit (Capsicum annuum L.)

2017 ◽  
Vol 1 (1) ◽  
pp. 34
Author(s):  
Oktaviana Shinta Risty ◽  
Muhamad Syukur
Keyword(s):  
Capsicum Annuum ◽  
Combining Ability ◽  
Design Method ◽  
Block Design ◽  
Inbred Lines ◽  
Fruit Weight ◽  
Capsicum Annuum L ◽  
Randomized Complete Block Design ◽  
Plant Hybrid ◽  
Half Diallel

The aim of this research was to study estimation general combining ability (GCA) and specific combining ability(SCA) of six bird pepper inbred lines (Capsicum annuum L.), heterosis and heterobeltiosis of fifteen bird pepper hybrids in half diallel crosses. The experiment were conducted from November 2013 to April 2014 using a Randomized Complete Block Design with three replications at Leuwikopo University Farm, IPB. Analysis of GCA and SCA were based on the Griffing’s model of diallel design method II. Heterosis values were predicted based on the average values of their parents and heterobeltiosis were predicted based on the average values of the highest parents. Genotype IPB C174 had the highest GCA for fruit weight, fruit length, fruit width, and yield for each plant. Hybrid IPB C160 x IPB C291 and IPB C291 x IPB C293 had positive SCA, heterosis, and heterobeltiosis values for some variable observed. Hybrid IPB C174 x IPB C291 had better advantages than the commercial varieties which were Santika, Bhaskara, Sonar, and Nirmala on fruit weight characters.Keywords: bird pepper, combining ability, half diallel, heterosis

scholarly journals Combining ability of inbred lines of maize and stability of their respective single-crosses

2003 ◽  
Vol 60 (1) ◽  
pp. 83-89 ◽  
Author(s):  
Aurélio Mendes Aguiar ◽  
Luciana Aparecida Carlini-Garcia ◽  
Adelmo Resende da Silva ◽  
Mateus Figueiredo Santos ◽  
Antonio Augusto Franco Garcia ◽  
...  
Keyword(s):  
Grain Yield ◽  
Combining Ability ◽  
Zea Mays L ◽  
Block Design ◽  
Diallel Analysis ◽  
Inbred Lines ◽  
Breeding Programs ◽  
Randomized Complete Block Design ◽  
Single Cross ◽  
Ear Height

The utilization of diallel crosses for identification of superior combinations is a common practice in maize (Zea mays L.) breeding programs. This methodology allows the estimation of the combining ability of genotypes being evaluated. In this work, five inbred lines were evaluated as to their general (GCA) and specific (SCA) combining abilities, by using a complete diallel scheme. The single-crosses produced between these inbred lines were evaluated in seven environments, along with two checks, by using a randomized complete block design. Traits analized were: grain yield, plant height, ear height, ear placement, and prolificacy. A diallel analysis was carried out, following an adaptation of Griffing's method IV, in addition to hybrid stability and adaptability analyses. Significant differences were detected for entries and environments for all traits. The interaction genotype vs. environment was significant for all traits. GCA's were significant for all traits, while SCA's were non-significant only for ear placement. For grain yield, both additive (GCA) and non-additive (SCA) effects were important, while for the remaining traits additive effects were more important. The high yielding single-cross was obtained from the cross of lines L-08-05F and L-38-05D. Those inbred lines showed higher GCA's and their cross also had high SCA; also, it is responsive to environment improvements and reasonably stable. The second in rank high yielding single-cross, L-46-10D x L-08-05F, showed wide adaptability and stability.

scholarly journals COMBINING ABILITY ANALYSIS FOR DIFFERENT YIELD COMPONENTS IN MAIZE (Zea mays L.) INBRED LINES

2015 ◽  
Vol 27 (1) ◽  
pp. 17-23
Author(s):  
F. M. A. Haydar ◽  
N. K. Paul
Keyword(s):  
Combining Ability ◽  
Yield Components ◽  
Block Design ◽  
Inbred Lines ◽  
Diallel Mating Design ◽  
Combining Ability Analysis ◽  
Randomized Complete Block Design ◽  
Additive Gene ◽  
New Varieties ◽  
Half Diallel

The  present  study  was  carried  out  to  determine  the  combining  ability  of  yield and yield components by crossing six diverse maize  inbred lines in a half diallel mating design. Fifteen F1 progenies along with their six parents were planted in randomized complete block design with three replications. GCA to SCA ratios were less than one for plant height, cob diameter, cob length and number of kernels row/cob indicating a preponderance of additive over non additive gene action. The crosses P1×P2, P3×P5 and P5×P6 were exhibited significant and positive SCA effects for yield and cob diameter, number of row/cob and number of grains/cob of yield contributing characters. The parents P1 (IL4), P3 (IL18)and P5 (IL23 were good general combiner for grain yield and yield attributing characters. It can be concluded that these parental lines can be desirable parents for hybrids as well as for inclusion in breeding program, since they may contribute favorable alleles in the synthesis of new varieties.

Genetic Assessment of Combining Ability for Seed-Yield and Its Related Traits in Soybean [Glycine max (L.) Merrill]

2020 ◽  
Author(s):  
Gbemisola Oluwayemisi Ige ◽  
Godfree Chigeza ◽  
Subhash Chander ◽  
Abebe Tesfaye Abush ◽  
David Kolawole Ojo ◽  
...  
Keyword(s):  
Seed Yield ◽  
Combining Ability ◽  
Agronomic Traits ◽  
Block Design ◽  
Days To Flowering ◽  
Randomized Complete Block Design ◽  
Glycine Max L ◽  
Improvement Programme ◽  
Genetic Assessment ◽  
Made In

Crosses were made in line × tester mating design between a set of five IITA soybean released varieties and three plant introduced (PI) accessions obtained from World Vegetable Center, Taiwan. In order to produce sufficient seeds, F1 crosses were selfed, subsequently F2 populations along with their parents were planted in a randomized complete block design at two locations in Nigeria with three replications. Agronomic traits viz. days to flowering, days to poding, plant height, number of pods/plant and seed yield/plant were measured. Testers and lines showed significant differences for all the measured traits except days to flowering for testers. Considering the significance and magnitude of general combining ability (GCA) effect, line TGx 1988-5F was observed desirable for earliness, while line TGx 1989-19F was the best combiner for number of pods/plant and seed yield/plant. On the other hand, best tester for seed yield was PI 230970. Crosses TGx 1835-10E × PI 459025B and TGx 1987-62F × PI 459025B had significant and highest SCA effect for seed yield/plant. These two crosses appeared to be most promising for soybean yield improvement programme.

scholarly journals Biomass and Sugar Content of Some Varieties of Sorghum (Sorghum Bicolor L. Moench) on Dry Land Forest as Feedstock Bioethanol

2018 ◽  
Vol 164 ◽  
pp. 01035 ◽  
Author(s):  
Praptiningsih Gamawati Adinurani ◽  
Sri Rahayu ◽  
Luluk Sulistiyo Budi ◽  
Anggi Nindita ◽  
Peeyush Soni ◽  
...  
Keyword(s):  
Biomass Production ◽  
Block Design ◽  
Sugar Content ◽  
Sustainable Use ◽  
Dry Weight ◽  
Raw Material ◽  
Dry Land ◽  
Randomized Complete Block Design ◽  
High Sugar Content ◽  
Selection Of

The possibility of sustainable use of sorghum as raw material for bioethanol needs to be supported by evaluation and selection of sorghum varieties for high biomass production and sugar content. An experiment was conducted on forest dry land , altitude 63 m asl. This research aimed to determine the interaction of sorghum varieties and mycorrhiza on biomass production and the high sugar content. The experiment was a two factor (varieties and dosage of mycorrhiza plus) in a randomized complete block design with three replications. The varieties were Suri 3, Kawali, Super 2, Suri 4. Dosage of mycorrhiza plus (5, 10, 15) g per plant. The interaction only significant on a number of internodes and bagasse. There are no effects of dosages mycorrhiza plus, however, varieties of sorghum have significant effects on many variables measured. The highest amount of biomass include the stem height (301.28 cm), stem Dry Weight (DW) is 23.48 t ha-1, leaf DW (4.65 t ha-1), panicle DW (11.35 t ha-1) and biomass DW (39.98 t ha-1) were obtained in varieties Super 2. Sugar content (16.93 %) was obtained in varieties Suri 3 and juice production (2 742.86 L ha-1) in varieties Suri 4.

scholarly journals Manually Feed NPK Fertigation Improves Growth and Yield of Chili Pepper Hybrids in Ultisol

Akta Agrosia ◽  
2020 ◽  
Vol 23 (1) ◽  
pp. 19-26
Author(s):  
Catur Herison ◽  
Rustikawati Rustikawati ◽  
Hasanudin Hasanudin ◽  
Usman K.J. Suharjo ◽  
Merakati Handajaningsih ◽  
...  
Keyword(s):  
Block Design ◽  
Fertilizer Application ◽  
Chili Pepper ◽  
Growth And Yield ◽  
Plastic Mulch ◽  
Dry Land ◽  
Randomized Complete Block Design ◽  
Npk Fertilizer ◽  
Hybrid Cultivar ◽  
Planting Season

Extending the planting area to a less-fertile soil, such as Ultisols, become inevitable choice to increase the national chili pepper production in Indonesia as this types of soil is the largest part of dry land of Indonesia, about 29.7% or around 51 million ha.  However, efforts to increase its productivity by providing sufficient fertilizers application is most frequently inefficient because in the conventional fertilizer applications, broadcasted fertilizer on the soil bed, are not readily available for the plant as their solubility is limited under the plastic mulch and still in the form of granular until the end of planting season.  Fertigation, therefore, maybe the answer for this problem.  The objective of this study was to determine the best NPK fertigation method on four chili pepper hybrids.  The experiment was conducted in a randomized complete block design with three replication, and the treatments were arranged in a split plot design.  As the main plots were NPK fertigation intensity, i.e. 100%, 75%, 50%, 25% and 0% fertigation with the remnant fertilizers were circularly broadcasted surrounding the plant.  As the subplots were chili pepper hybrids, i.e. ‘Maxima’, H39, H14, and ‘UNIB CHR17’.  The results showed that there was no interaction effect of fertigation intensity indicated that all hybrid genotypes showed similar pattern of responses.  The H39 hybrid had better vegetative growth compared to other hybrids in term of plant height, dichotomous height, stem diameter, number of branches, plant fresh-weight.  Whereas the hybrid cultivar ‘Maxima’ showed the highest yield followed by H14 and cultivar ‘UNIB CHR17’.  The 100% fertigation was the best method of NPK fertilizer application for chili pepper in Ultisols.keywowrd: fertigation, chili pepper, fertilizer application, acidic soil

scholarly journals Heterosis for seed, oil yield and quality of some different hybrids sunflower

OCL ◽  
2021 ◽  
Vol 28 ◽  
pp. 25
Author(s):  
Mohamed Abdel-Rahem ◽  
Tamer H.A. Hassan ◽  
Hamdy A. Zahran
Keyword(s):  
Combining Ability ◽  
Gene Action ◽  
Block Design ◽  
Male Sterile ◽  
Mean Values ◽  
Yield And Quality ◽  
Additive Type ◽  
Randomized Complete Block Design ◽  
Varietal Improvement

Twenty-one hybrids of sunflower were produced by crossing 7 introduced cytoplasmic male sterile lines (CMS-lines) with 3 restorer lines (RF-lines) using line × tester mating design. The twenty-one hybrids, three restorers, seven maintainer lines (B-lines) were evaluated. The experiment was conducted in a randomized complete block design of three replications. Mean squares due to genotypes, parents (P), crosses (C), lines (L), testers (T), P vs. C, for stearic acid and line × tester for palmitic acid. The inbred lines and their F1 hybrids differed significantly in their mean values of the traits under study. The variances due to specific combining ability (SCA) were higher than general combining ability (GCA) variances for all the studied traits, showing non-additive type of gene action controlling the traits. Non-additive type of gene action can be utilized for varietal improvement through heterosis breeding. Heterosis values for seed yield plant−1 were positive and highly significant relative to both the parental mean (17.68–72.38%) and the better parent (−2.86–56.842%). Significantly and negative heterosis was recorded in the case of linoleic acid relative to the parental mean (−81.24 to −38.02%) and better parent (−66.24–22.87%). With oleic acid, the heterotic effect ranged from −14.18 to 39.59% (parental mean) and from −15.06 to 38.72% (better parent). Therefore, these results are valuable for the improvement of quantitative as well as qualitative traits in sunflower breeding material to fulfill the edible oil requirements.

scholarly journals Expression of Heterosis for Productive Traits in F1 Brinjal (Solanum melongena L.) Hybrids

1970 ◽  
Vol 8 (2) ◽  
pp. 8-13 ◽  
Author(s):  
MJ Chowdhury ◽  
S Ahmad ◽  
M Nazim Uddin ◽  
AKM Quamruzzaman ◽  
MMA Patwary
Keyword(s):  
Block Design ◽  
Winter Season ◽  
Solanum Melongena ◽  
Inbred Lines ◽  
Diallel Mating Design ◽  
Randomized Complete Block Design ◽  
Hybrid Variety ◽  
Productive Traits ◽  
Positive Heterosis ◽  
Half Diallel

The study was carried out to estimate magnitude of heterosis over better parent and standard check for some important characters in 15 crosses resulting from a half diallel mating design of 6 inbred lines of brinjal. Hybrid variety 'Tarapuri' was used as standard check. The parents and the hybrids were evaluated at the farm of Olericulture Division, HRC, BARI, during the winter season of 2008-2009. A randomized complete block design with three replications was used. Significant levels of heterosis were detected for all the traits studied. Promising hybrids exhibited significant positive heterosis for fruit yield, magnitude of which ranged from 9.63% to 74.89% and 8.52% to 72.60% over better parent and standard check, respectively. Some of the promising hybrids showed desirable heterosis for earliness, increased fruit number and yield. Keywords: Heterosis; productive traits; brinjal; hybrid. DOI: 10.3329/agric.v8i2.7571 The Agriculturists 8(2): 8-13 (2010)

scholarly journals Inbreeding depression and average genetic components in green corn genotypes

2017 ◽  
Vol 47 (5) ◽  
Author(s):  
Maurício Carlos Kuki ◽  
Carlos Alberto Scapim ◽  
Ronald José Barth Pinto ◽  
Alex Sandro Torre Figueiredo ◽  
Rodrigo Iván Contreras-Soto ◽  
...  
Keyword(s):  
Inbreeding Depression ◽  
Block Design ◽  
Inbred Lines ◽  
Additive Effects ◽  
Crop Season ◽  
Corn Production ◽  
Genetic Components ◽  
Randomized Complete Block Design ◽  
Corn Inbred ◽  
Plot Design

ABSTRACT: This study aimed to evaluate the inbreeding depression and average genetic components in seven hybrids and two open pollinated cultivars for green corn production, as well as to select the best genotypes in order to obtain base populations for inbred lines extraction. The experiment was carried out in a randomized complete block design with four replications, in a split plot design, with inbreeding levels arranged in the plots and the different genotypes distributed over the subplots, in the municipality of Sabáudia - PR, during the 2014/15 crop season. Higher values of dominance and inbreeding depression were observed for yield of both unhusked and commercial ears. Higher additive effects were detected on length and diameter of commercial ears. The genotypes AM811, Cativerde 02 and AG4051 showed greater probability of obtaining highly productive and higher quality green corn inbred lines.

Sign in / Sign up

Export Citation Format

Share Document