scholarly journals The Effects of Using Some Different Types of Learning Automata on Presentation of Adaptive Neighbor-Based and Energy Efficient Topology Control Protocols in Wireless Sensor Networks

2017 ◽  
Vol 2 (2) ◽  
pp. 6-17
Author(s):  
Shekufeh Shafeie ◽  
M. R. Meybodi
Keyword(s):  
Energy Consumption ◽  
Sensor Networks ◽  
Energy Efficient ◽  
Topology Control ◽  
Control Point ◽  
Learning Automata ◽  
Point Of View ◽  
Q Model ◽  
Control Protocols ◽  
Model Environment

The high number of nodes and dynamic and periodic topological changes, as well as constraints in the physical size of nodes, energy resources, and power of processing are some characteristics of sensor networks that make them different from other networks. One method to overcome these constraints is topology control with the aim of reducing energy consumption and increasing the network’s capacity, which has the most influence on the network’s efficiency, especially in terms of energy consumption and lifetime. In  consideration of learning  Automata’s abilities, such as low computational load and adaptability to changes via low environmental feedbacks, in this paper, neighbor-based topology control protocols based on learning Automata have been proposed somehow that all nodes are equipped with Automata. The nodes try to adapt their selected actions with required conditions for creating a connected and energy efficient network by selecting the best radio range for themselves. This approach finally forms a proper topology, and in this way it lowers the network’s energy consumption in its lifetime. The exclusive characteristic of these methods is the high number of transmission ranges that each node can select as transmission radius. In the first proposed protocol, a P-model environment is used for learning phase, but in the second proposed protocol, a Q-model environment is applied. Simulation results show favorite functionality of proposed protocols in comparison with some other similar protocols from topology control point of view, as well as high improvement of achieved results for the Q-model environment.

scholarly journals Energy Consumption Analyzing in Single hop Transmission and Multi-hop Transmission for using Wireless Sensor Networks

2018 ◽  
Vol 14 (1) ◽  
pp. 156-163
Author(s):  
Ekhlas K. Hamza ◽  
Heba H. Alhayani
Keyword(s):  
Wireless Sensor Networks ◽  
Energy Consumption ◽  
Sensor Networks ◽  
Energy Efficient ◽  
Point Of View ◽  
Wireless Sensor ◽  
Performance Simulation ◽  
Balancing Energy ◽  
Simulation Results ◽  
Area Monitoring

Wireless sensor networks (WSNs) are emerging in various application like military, area monitoring, health monitoring, industry monitoring and many more. The challenges of the successful WSN application are the energy consumption problem. since the small, portable batteries integrated into the sensor chips cannot be re-charged easily from an economical point of view. This work focusses on prolonging the network lifetime of WSNs by reducing and balancing energy consumption during routing process from hop number point of view. In this paper, performance simulation was done between two types of protocols LEACH that uses single hop path and MODLEACH that uses multi hop path by using Intel Care i3 CPU (2.13GHz) laptop with MATLAB (R2014a). The simulation results showed how the multi-hop protocol was more energy efficient than single hop protocol.

scholarly journals Energy-Efficient Packet Forwarding Scheme Based on Fuzzy Decision-Making in Underwater Sensor Networks

Sensors ◽  
2021 ◽  
Vol 21 (13) ◽  
pp. 4368
Author(s):  
Jitander Kumar Pabani ◽  
Miguel-Ángel Luque-Nieto ◽  
Waheeduddin Hyder ◽  
Pablo Otero
Keyword(s):  
Energy Consumption ◽  
Sensor Networks ◽  
Energy Efficient ◽  
Real Life ◽  
Base Station ◽  
Fuzzy Decision Making ◽  
Underwater Sensor Networks ◽  
Packet Forwarding ◽  
Node Number ◽  
The Impact

Underwater Wireless Sensor Networks (UWSNs) are subjected to a multitude of real-life challenges. Maintaining adequate power consumption is one of the critical ones, for obvious reasons. This includes proper energy consumption due to nodes close to and far from the sink node (gateway), which affect the overall energy efficiency of the system. These wireless sensors gather and route the data to the onshore base station through the gateway at the sea surface. However, finding an optimum and efficient path from the source node to the gateway is a challenging task. The common reasons for the loss of energy in existing routing protocols for underwater are (1) a node shut down due to battery drainage, (2) packet loss or packet collision which causes re-transmission and hence affects the performance of the system, and (3) inappropriate selection of sensor node for forwarding data. To address these issues, an energy efficient packet forwarding scheme using fuzzy logic is proposed in this work. The proposed protocol uses three metrics: number of hops to reach the gateway node, number of neighbors (in the transmission range of a node) and the distance (or its equivalent received signal strength indicator, RSSI) in a 3D UWSN architecture. In addition, the performance of the system is also tested with adaptive and non-adaptive transmission ranges and scalable number of nodes to see the impact on energy consumption and number of hops. Simulation results show that the proposed protocol performs better than other existing techniques or in terms of parameters used in this scheme.

An Energy-Balance Based Distributed Topology Control Algorithm for Wireless Sensor Networks

2012 ◽  
Vol 490-495 ◽  
pp. 1392-1396 ◽  
Author(s):  
Chu Hang Wang
Keyword(s):  
Wireless Sensor Networks ◽  
Energy Consumption ◽  
Sensor Networks ◽  
Topology Control ◽  
Control Algorithm ◽  
Path Loss ◽  
Network Connectivity ◽  
Premature Death ◽  
Residual Energy ◽  
Wireless Sensor

Topology control is an efficient approach which can reduce energy consumption for wireless sensor networks, and the current algorithms mostly focus on reducing the nodes’ energy consumption by power adjusting, but pay little attention to balance energy consumption of the whole network, which results in premature death of many nodes. Thus, a distributed topology control algorithm based on path-loss and residual energy (PRTC) is designed in this paper. This algorithm not only maintains the least loss links between nodes but also balances the energy consumption of the network. The simulation results show that the topology constructed by PRTC can preserve network connectivity as well as extend the lifetime of the network and provide good performance of energy consumption.

scholarly journals Energy-efficient hierarchical routing in wireless sensor networks based on Fog Computing

2020 ◽  
Author(s):  
Ademola Abidoye ◽  
Boniface Kabaso
Keyword(s):  
Wireless Sensor Networks ◽  
Energy Consumption ◽  
Sensor Networks ◽  
Routing Protocol ◽  
Data Transmission ◽  
Energy Efficient ◽  
Fog Computing ◽  
Sensor Nodes ◽  
Wireless Sensor ◽  
Hierarchical Routing

Abstract Wireless sensor networks (WSNs) have been recognized as one of the most essential technologies of the 21st century. The applications of WSNs are rapidly increasing in almost every sector because they can be deployed in areas where cable and power supply are difficult to use. In the literature, different methods have been proposed to minimize energy consumption of sensor nodes so as to prolong WSNs utilization. In this article, we propose an efficient routing protocol for data transmission in WSNs; it is called Energy-Efficient Hierarchical routing protocol for wireless sensor networks based on Fog Computing (EEHFC). Fog computing is integrated into the proposed scheme due to its capability to optimize the limited power source of WSNs and its ability to scale up to the requirements of the Internet of Things applications. In addition, we propose an improved ant colony optimization (ACO) algorithm that can be used to construct optimal path for efficient data transmission for sensor nodes. The performance of the proposed scheme is evaluated in comparison with P-SEP, EDCF, and RABACO schemes. The results of the simulations show that the proposed approach can minimize sensor nodes’ energy consumption, data packet losses and extends the network lifetime

Nature-Inspired Algorithms in Wireless Sensor Networks

2019 ◽  
pp. 246-275
Author(s):  
Ajay Kaushik ◽  
S. Indu ◽  
Daya Gupta
Keyword(s):  
Wireless Sensor Networks ◽  
Big Data ◽  
Energy Consumption ◽  
Sensor Networks ◽  
Energy Efficient ◽  
Sensor Node ◽  
Optimization Problem ◽  
Sensor Nodes ◽  
Wireless Sensor ◽  
Nature Inspired Algorithms

Wireless sensor networks (WSNs) are becoming increasingly popular due to their applications in a wide variety of areas. Sensor nodes in a WSN are battery operated which outlines the need of some novel protocols that allows the limited sensor node battery to be used in an efficient way. The authors propose the use of nature-inspired algorithms to achieve energy efficient and long-lasting WSN. Multiple nature-inspired techniques like BBO, EBBO, and PSO are proposed in this chapter to minimize the energy consumption in a WSN. A large amount of data is generated from WSNs in the form of sensed information which encourage the use of big data tools in WSN domain. WSN and big data are closely connected since the large amount of data emerging from sensors can only be handled using big data tools. The authors describe how the big data can be framed as an optimization problem and the optimization problem can be effectively solved using nature-inspired algorithms.

Sign in / Sign up

Export Citation Format

Share Document