A Novel Forecasting Model for Chemical Flooding Enhanced Oil Recovery

2013 ◽  
Author(s):  
Alireza Mollaei ◽  
Mojdeh Delshad ◽  
Zhitao Li
Keyword(s):  
Enhanced Oil Recovery ◽  
Oil Recovery ◽  
Forecasting Model ◽  
Chemical Flooding

scholarly journals Enhanced Oil Recovery: Chemical Flooding

2021 ◽  
Author(s):  
Ahmed Ragab ◽  
Eman M. Mansour
Keyword(s):  
Interfacial Tension ◽  
Enhanced Oil Recovery ◽  
Oil Recovery ◽  
Recovery Phase ◽  
Mobility Ratio ◽  
Chemical Flooding ◽  
Sweep Efficiency ◽  
Oil Displacement ◽  
Remaining Oil ◽  
Oil Displacement Efficiency

The enhanced oil recovery phase of oil reservoirs production usually comes after the water/gas injection (secondary recovery) phase. The main objective of EOR application is to mobilize the remaining oil through enhancing the oil displacement and volumetric sweep efficiency. The oil displacement efficiency enhances by reducing the oil viscosity and/or by reducing the interfacial tension, while the volumetric sweep efficiency improves by developing a favorable mobility ratio between the displacing fluid and the remaining oil. It is important to identify remaining oil and the production mechanisms that are necessary to improve oil recovery prior to implementing an EOR phase. Chemical enhanced oil recovery is one of the major EOR methods that reduces the residual oil saturation by lowering water-oil interfacial tension (surfactant/alkaline) and increases the volumetric sweep efficiency by reducing the water-oil mobility ratio (polymer). In this chapter, the basic mechanisms of different chemical methods have been discussed including the interactions of different chemicals with the reservoir rocks and fluids. In addition, an up-to-date status of chemical flooding at the laboratory scale, pilot projects and field applications have been reported.

scholarly journals Experimental Investigation of Chemical Flooding Using Nanoparticles and Polymer on Displacement of Crude Oil for Enhanced Oil Recovery

2020 ◽  
Vol 2020 ◽  
pp. 1-10
Author(s):  
Imran Akbar ◽  
Hongtao Zhou ◽  
Wei Liu ◽  
Muhammad Usman Tahir ◽  
Asadullah Memon ◽  
...  
Keyword(s):  
Fluid Flow ◽  
Enhanced Oil Recovery ◽  
Oil Recovery ◽  
Petroleum Industry ◽  
Chemical Flooding ◽  
Polymer Gel ◽  
Core Flooding ◽  
High Concentration ◽  
Remaining Oil ◽  
Water Cut

In the petroleum industry, the researchers have developed a new technique called enhanced oil recovery to recover the remaining oil in reservoirs. Some reservoirs are very complex and require advanced enhanced oil recovery (EOR) techniques containing new materials and additives in order to produce maximum oil in economic and environmental friendly manners. In this work, the effects of nanosuspensions (KY-200) and polymer gel HPAM (854) on oil recovery and water cut were studied in the view of EOR techniques and their results were compared. The mechanism of nanosuspensions transportation through the sand pack was also discussed. The adopted methodology involved the preparation of gel, viscosity test, and core flooding experiments. The optimum concentration of nanosuspensions after viscosity tests was used for displacement experiments and 3 wt % concentration of nanosuspensions amplified the oil recovery. In addition, high concentration leads to more agglomeration; thus, high core plugging takes place and diverts the fluid flow towards unswept zones to push more oil to produce and decrease the water cut. Experimental results indicate that nanosuspensions have the ability to plug the thief zones of water channeling and can divert the fluid flow towards unswept zones to recover the remaining oil from the reservoir excessively rather than the normal polymer gel flooding. The injection pressure was observed higher during nanosuspension injection than polymer gel injection. The oil recovery was achieved by about 41.04% from nanosuspensions, that is, 14.09% higher than polymer gel. Further investigations are required in the field of nanoparticles applications in enhanced oil recovery to meet the world's energy demands.

scholarly journals Evaluation Of Surfactant Performance For Enhanced Oil Recovery / Posouzení Vhodnosti Aplikace Povrchově Aktivních Látek (Pal) Pro Potřeby Zvýšení Vytěžitelnosti Ložisek Uhlovodíků

2013 ◽  
Vol 59 (4) ◽  
pp. 32-38 ◽  
Author(s):  
Michal Porzer ◽  
Petr Bujok ◽  
Martin Klempa ◽  
Petr Pánek
Keyword(s):  
Crude Oil ◽  
Enhanced Oil Recovery ◽  
Oil Recovery ◽  
Chemical Flooding ◽  
Surfactant Flooding ◽  
Production Methods ◽  
Laboratory Environment ◽  
Recovery Processes ◽  
Conventional Production

Abstract This paper focuses on the field of enhanced oil recovery by means of a chemical flooding of oil deposit especially a surfactant flooding method. The main objective is the application of the aforementioned method at the Czech oil deposit Ždánice - Miocene which bears the crude oil of significant viscosity and gravity that does not allow conventional production methods to be used. We evaluated the performance of various surfactants in the laboratory environment by simulating oil recovery processes

scholarly journals Synthesis and Characterization of Polymeric Surfactant from Palm Oil Methyl Ester and Vinyl Acetate for Chemical Flooding

REAKTOR ◽  
2021 ◽  
Vol 21 (2) ◽  
pp. 65-73
Author(s):  
Agam Duma Kalista Wibowo ◽  
Pina Tiani ◽  
Lisa Aditya ◽  
Aniek Sri Handayani ◽  
Marcelinus Christwardana
Keyword(s):  
Methyl Ester ◽  
Interfacial Tension ◽  
Vinyl Acetate ◽  
Enhanced Oil Recovery ◽  
Oil Recovery ◽  
Mobility Control ◽  
Wettability Alteration ◽  
Polymeric Surfactant ◽  
Chemical Flooding

Surfactants for enhanced oil recovery are generally made from non-renewable petroleum sulfonates and their prices are relatively expensive, so it is necessary to synthesis the bio-based surfactants that are renewable and ecofriendly. The surfactant solution can reduce the interfacial tension (IFT) between oil and water while vinyl acetate monomer has an ability to increase the viscosity as a mobility control. Therefore, polymeric surfactant has both combination properties in reducing the oil/water IFT and increasing the viscosity of the aqueous solution simultaneously. Based on the study, the Critical Micelle Concentration (CMC) of Polymeric Surfactant was at 0.5% concentration with an IFT of 7.72x10-2 mN/m. The best mole ratio of methyl ester sulfonate to vinyl acetate for polymeric surfactant synthesis was 1:0.5 with an IFT of 6.7x10-3 mN/m. Characterization of the product using FTIR and HNMR has proven the creation of polymeric surfactant. Based on the wettability alteration study, it confirmed that the product has an ability to alter from the initial oil-wet to water-wet quartz surface. In conclusion, the polymeric surfactant has ultralow IFT and could be an alternative surfactant for chemical flooding because the IFT value met with the required standard for chemical flooding ranges from 10-2 to 10-3 mN/m.Keywords: Enhanced Oil recovery, Interfacial Tension, Methyl Ester Sulfonate, Polymeric surfactant, vinyl acetate

scholarly journals Assessment of oil recovery enhancement through surfactant flooding; Experimental and feasibility studies

2021 ◽  
pp. 01-32
Author(s):  
Gameil Sameh ◽  
Mohamed Ismaiel ◽  
Ahmed Fakhry ◽  
Omar Hesham ◽  
Felopateer Magdy ◽  
...  
Keyword(s):  
Enhanced Oil Recovery ◽  
Oil Recovery ◽  
Feasibility Studies ◽  
Good Effect ◽  
Chemical Flooding ◽  
Surfactant Flooding ◽  
Crude Oil Price ◽  
Chemical Methods ◽  
Thermal Methods ◽  
Hydrocarbon Recovery

Chemical flooding is one of the major enhanced oil recovery (EOR) techniques particularly for reservoirs where thermal methods are not applicable, that chemical flooding may be polymer flooding, alkaline flooding, surfactant flooding, or a combination of them. The application of designing a chemical flooding program is strongly affected by the current economics, reservoir oil type, and crude oil price. In this project, mechanisms of different chemical methods will be discussed, and design chemical flooding program by using a laboratory scale and programming method. This project is mainly about making a design of surfactant flooding program, through choosing the optimum surfactant concentration. Also, economic study is very important in designing the program to know if the project is profitable or not to identify its efficiency, and choosing the better type of surfactant flooding in the reservoir. The results of this project proved that the surfactant has good effect on rock wettability to more water- wet, so increase the hydrocarbon recovery. Keywords: Surfactant flooding; Enhanced Oil Recovery; Economic profit

scholarly journals Foam-Assisted Chemical Flooding for Enhanced Oil Recovery: Effects of Slug Salinity and Drive Foam Strength

2019 ◽  
Vol 33 (6) ◽  
pp. 4951-4963 ◽  
Author(s):  
Martijn T. G. Janssen ◽  
Abdulaziz S. Mutawa ◽  
Rashidah M. Pilus ◽  
Pacelli L. J. Zitha
Keyword(s):  
Enhanced Oil Recovery ◽  
Oil Recovery ◽  
Chemical Flooding

Integrated EOR Screening in a Marginal Oil Field Environment

2021 ◽  
Author(s):  
Chukwunonso Uche ◽  
Samuel Esieboma ◽  
Jennifer Uche ◽  
Ibrahim Bukar
Keyword(s):  
Enhanced Oil Recovery ◽  
Oil Recovery ◽  
Laboratory Data ◽  
Oil Field ◽  
Chemical Flooding ◽  
Implementation Challenges ◽  
Recovery Potential ◽  
Field Environment ◽  
Screening Study ◽  
The Impact

Abstract An evaluation of potential EOR processes applicable in the marginal oil field operation of the Niger Delta region is presented. Technical feasibility, process availability, oil recovery potential, and other uncertainties and risks associated with exploitation of enhanced oil recovery technique in a marginal oil field environment are being assessed. Few Enhanced oil recovery processes, namely polymer flooding, chemical flooding and microbial EOR (MEOR), are considered for possible application in this marginal oil field. The objective of the screening study is to evaluate and rank the EOR options and also select the most attractive method that will have to be further chased to a pilot test stage. Emphasis is strictly on a technical assessment of the incremental oil potential of each of the EOR methods and also identification of critical operational and logistical components of the entire process for their implementation in the offshore operating environment. Recoverable volumes associated with EOR may be significant, but key project development and implementation challenges and extra cost elements must be considered in any EOR forecast for an effective EOR process ranking. Some of these concerns (e.g. Polymer/chemical supply, facilities requirements, and the impact of EOR on reservoir performance and wellbore integrity) may be significant enough to eliminate a method from being considered further and at that point the best EOR option that requires minimal cost exposure for achieving the best recoverable shall be considered. Moreso, there is consideration of the quantity and quality of laboratory data that should support the viability of each EOR process being considered. This paper narrates the state of technical readiness for field implementation of each EOR method and identifies remaining work required to progress EOR process in this marginal oil field.

Modeling of CoSolvent Assisted Chemical Flooding for Enhanced Oil Recovery in Heavy Oil Reservoirs

2018 ◽  
Author(s):  
Cuong Dang ◽  
Long Nghiem ◽  
Ngoc Nguyen ◽  
Chaodong Yang ◽  
Arash Mirzabozorg ◽  
...  
Keyword(s):  
Enhanced Oil Recovery ◽  
Oil Recovery ◽  
Heavy Oil ◽  
Oil Reservoirs ◽  
Chemical Flooding ◽  
Heavy Oil Reservoirs

scholarly journals Numerical Simulation and Optimization of Enhanced Oil Recovery by the In Situ Generated CO2Huff-n-Puff Process with Compound Surfactant

2016 ◽  
Vol 2016 ◽  
pp. 1-13 ◽  
Author(s):  
Yong Tang ◽  
Zhengyuan Su ◽  
Jibo He ◽  
Fulin Yang
Keyword(s):  
Enhanced Oil Recovery ◽  
Oil Recovery ◽  
History Matching ◽  
Injection Rate ◽  
Thermal Recovery ◽  
Chemical Flooding ◽  
Core Flooding ◽  
Daily Production ◽  
Simulation And Optimization

This paper presents the numerical investigation and optimization of the operating parameters of the in situ generated CO2Huff-n-Puff method with compound surfactant on the performance of enhanced oil recovery. First, we conducted experiments of in situ generated CO2and surfactant flooding. Next, we constructed a single-well radial 3D numerical model using a thermal recovery chemical flooding simulator to simulate the process of CO2Huff-n-Puff. The activation energy and reaction enthalpy were calculated based on the reaction kinetics and thermodynamic models. The interpolation parameters were determined through history matching a series of surfactant core flooding results with the simulation model. The effect of compound surfactant on the Huff-n-Puff CO2process was demonstrated via a series of sensitivity studies to quantify the effects of a number of operation parameters including the injection volume and mole concentration of the reagent, the injection rate, the well shut-in time, and the oil withdrawal rate. Based on the daily production rate during the period of Huff-n-Puff, a desirable agreement was shown between the field applications and simulated results.

Sign in / Sign up

Export Citation Format

Share Document